Hey guys,
Can someone with a working Kenzo give me the folders that have something about wifi, bluetooth and radio?
maybe is something missing on my phone and wifi/bt doesn't turn on.
folders that i know have something about wifi:
/data/misc/wifi
/etc/wifi
/persist
/sys/devices/soc.0/a000000.qcom,wcnss-wlan
if anybody knows more folders please tell me, i appreciate it
hed190 said:
Hey guys,
Can someone with a working Kenzo give me the folders that have something about wifi, bluetooth and radio?
maybe is something missing on my phone and wifi/bt doesn't turn on.
folders that i know have something about wifi:
/data/misc/wifi
/etc/wifi
/persist
/sys/devices/soc.0/a000000.qcom,wcnss-wlan
if anybody knows more folders please tell me, i appreciate it
Click to expand...
Click to collapse
WiFi/BT will not work if these files are missing from 'persist' root folder:
Code:
WCNSS_qcom_wlan_nv.bin
.bt_nv.bin
Anyway, you can always check the log for error messages while you turn on WiFi/BT:
Code:
adb logcat -v time > log.txt
- end with ctrl-c
- to get the radio logs only: adb logcat -b radio
k23m said:
WiFi/BT will not work if these files are missing from 'persist' root folder:
Code:
WCNSS_qcom_wlan_nv.bin
.bt_nv.bin
Anyway, you can always check the log for error messages while you turn on WiFi/BT:
Code:
adb logcat -v time > log.txt
- end with ctrl-c
- to get the radio logs only: adb logcat -b radio
Click to expand...
Click to collapse
Hey, thanks for the reply.
I have those files there...
i created a thread with an entire logcat and asking for help but no one replied... it is frustating
Thanks
Related
If you ...
find a bug or problem on 2.2, post here
find a solution on how to fix the bug, post here
want to get help on how to fix the bug, post here
anything else, goes here
This thread are meant for bug/problem solution and reported bug list of 2.2 custom ROM which i will try to manage, so people are not posting same bug, and asking for same solution all over again in X10 Custom ROM AOSP thread.
Limitation
Cannot Mount via USB
2.2 Custom ROM put the SYSTEM partition on your phone memory and the DATA partition in your SD card. That is why you cannot dismount the SD card from Android to mount to your PC.
No App2SD
2.2 Custom ROM is still running on 2.1 Custom Kernel which not supporting this.
Bug list
#0001 - WiFi not working - Fixed on 2.2
#0002 - Random android.process.media force close - Fixed on 2.2
#0003 - Home button not working, and no Lock Screen - Fixed on 2.2
#0004 - Cannot install certain APK (Angry Bird)
#0005 - No radio, no network and flashing Home - New on 0.0.2
#0006 - ADB shell have SU access, but Titanium Backup cannot work - New on 0.0.2
#0007 - SD Card non-ascii folder show as ???
#0008 - Facebook Contact Sync not available
#0009 - CPU Governor set to performance by default
Solutions for bugs
#0001 - How to enable WiFi on 2.2 Custom ROM
1. Try to enable WiFi, of course it will not work.. just do it.
2. WiFi will goes off automatically
3. Run
Code:
adb shell /system/bin/wlan_tool
4. If the adb stucks, just press CTRL+C
5. Repeat step 4 until you crash the phone
6. After reboot, your WiFi will work.
or
Code:
adb shell killall servicemanager
Post Reference
#0002 - android.process.media FC solution
0.0.1 compiled with prefilled databases which invalid for your phone
Code:
adb shell
cd /data/data/com.android.providers.media/databases
rm *
reboot
or this will ensure no invalid data anymore but will remove fixes for bug #0003
Code:
adb shell
cd /data/
rm -r data
mkdir data
reboot
Post Reference
#0003 - Fix Home Button & Lock Screen
Download sqlite here
First pull the db file first.
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
Then add value to its content
Code:
sqlite3.exe settings.db
sqlite> INSERT INTO "secure" VALUES(67,'device_provisioned','1');
sqlite> .exit
Then push back the db
Code:
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Then reboot.
Post Reference
#0004 - Solving installing APK problems
Currently the 2.2 Custom ROM does not support app2sd, and some APK may configure it self to be installed in sdcard.
So we force it to install on internal with code below
Code:
adb shell pm setInstallLocation 1
adb install -l com.rovio.angrybirds.apk
Post Reference
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
Post Reference
#0006 - Fixing SU access for Titanium Backup
Run this command
Code:
adb shell chmod 4755 /system/bin/su
Post Reference
#0007 - Fixing SD card mount command to show unicode letters
Modify your chargemon file so its enables utf8 for non ascii letter.
You need to do this on 2.1 ROM, not 2.2 ROM. The file is located in /system/bin
look for this
Code:
mount -t vfat -o rw,noatime,nodiratime /dev/block/mmcblk0p1 /sd
and change into this
Code:
mount -t vfat -o rw,noatime,nodiratime,utf8 /dev/block/mmcblk0p1 /sd
Notes:
You must use a Unix/Linux format capable text editor for this. Notepad will not work.
You can try ultraedit for it.
Post Reference
#0008 - Fix Facebook Sync
Download the ContactsProvider.apk here, then install to your Android using push command
Code:
adb push ContactsProvider.apk /system/app/ContactsProvider.apk
adb reboot
Post Reference
#0009 - Using SetCPU
By default is Performance, fast but wasting too much battery.
Use SetCPU and set to OnDemand.
Post Reference
2.2 Custom ROM FAQ
How and what happened if upgrade from 0.0.1 to 0.0.2?
Just copy data.img and system.img replacing your current one in FreeX10 folder.
This will replace all your 0.0.1 data, be sure to back up first with Titanium Backup
WiFi is running and connected, but cannot browser
This problem seems to be occurring on selected few.. You can set static IP to your android.
Go to Settings -> Wireless ... -> WiFi, then press menu button. From there you can se static IP
Is there a possibility of Timescape and Mediascape for 2.2 Custom ROM
The answer is yes, its possible.
I managed to install Mediascape.apk into 2.2 Custom ROM, but cannot run.
The reason it cannot run is because UX is using a lot of things in Framework-res.apk, images, layout, styles, and etc which cannot be copied directly from SE 2.1 into 2.2 AOSP. It requires someone to properly put all values, resolving conflicts inside Framework-res.apk before the UX can run, which will take months or at least weeks if someone dedicated his or her day job for it. Then after that we still need to deal with external files. So in conclusion, while it still possible, i don't think anyone will do it because of the time demanding process.
I want to help devs solving bugs, i found one but i don't know what actually happend.
While usb connected, from command prompt, type
Code:
adb logcat > logcat.txt
This will output a lot of debugging info into logcat.txt file, later if you find bug, you take a look inside the file.
See anything error or info related to the bug, and post here.. When writing the logcat.txt output, but them inside
Code:
brackets.
Do not post everything.. post few lines related to the bugs.
2.2 Custom ROM Testing Tools
Service Menu
WARNING: DO NOT INSTALL THIS UNLESS YOU DO DEVS, END USER DO NOT INSTALL
PURPOSE: MAYBE FOR TESTING DEVICE FEATURE, MIGHT BREAK SYSTEM APPS
Enable SE Service Menu for device testing. For devs only. You need to put adb stuff in the directory for install.bat to run.
Install framework
Code:
adb push permissions /system/etc/permissions
adb push lib /system/framework
adb reboot
Install applications
Code:
adb install app\bootinfo3.apk
adb install app\ServiceMenu2.apk
adb install app\com.laac.launcher.servicemenu.apk
Nice work. THis is handy
As i posted in the Main thread!
I think some of the force closes, (mainly acore and google framework) and the fact that the market crashes, come down to importing a vcard!
I imported vcard, get many force closes, market stops working, I clean install and don't install the vcard. Everything functions fine.
I do believe this is the reason!
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Ahmed radi said:
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Click to expand...
Click to collapse
Please read the main post!
sorry but no one answer me there
Thanks
Thanks for this ,hopefully a post like this is made for the 1st post on 2.1
http://forum.xda-developers.com/showpost.php?p=9134882&postcount=1
awesome thread, very helpful. Hopefully more people will read this rather than constantly posting the same bugs in the main thread.
Ahmed radi said:
sorry but no one answer me there
Click to expand...
Click to collapse
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
bsthost said:
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
Click to expand...
Click to collapse
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
angry birds on my x10 is working well....i take it from a previous backup and restrored on 2.2 with mybackup pro
Please post to http://forum.xda-developers.com/showthread.php?t=835308&page=9999 thread instead.
We don't need to create two discussion thread.
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
17mayis said:
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
Click to expand...
Click to collapse
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
New crash this morning : i tried to connect my BT headphone after that i've activated BT => BT has desactivated itself then the phone reboots.
zephyrix said:
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
Click to expand...
Click to collapse
i appreciate your answer man if you could tell me how to do this ? through adb shell or something else?
17mayis said:
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
Click to expand...
Click to collapse
Google is your friend!
i have flashPlayer10.1 problem it,s to slow when i play on any website any solution what might be ?
above, pls help us:thanks so much
you can use the 'adb logcat' coomnad to see the android logs.. if you want to filter the logs.. you can use the follwoing dilimiters..
adb logcat -v main
adb logcat -b radio
enichdi said:
above, pls help us:thanks so much
Click to expand...
Click to collapse
You can also see logs in UI (Windows):
c:\android-sdk\tools\ddms.bat
Hello, I was given a Gtablet by a friend. Everything is in proper working order except for the wifi. The wifi will endlessly scan, never pulling up any SSIDs. Here's what I've done to troubleshoot:
Ascertained flight mode was off (it was)
Enabled wifi through the developer options (Did nothing)
Manually enter SSID/Security information (Claims that SSID is not in range)
Reloaded the OS (He had VEGAn Tab on there. I reloaded the 5.1 Beta. I don't know what version he had on there, oops.)
After a clean install I have the exact same issue, which leads me to believe it is a hardware issue rather than a software issue. Is this common? Am I forgetting something? Would loading an entirely different ROM be of any use or do they also use the same driver?
My apologies if this has been answered previously, but in all my searching I can only find people who have this problem temporarily; a reboot fixes it for them. I haven't been able to find someone who has had this as a persistent issue.
JungleWallace said:
Hello, I was given a Gtablet by a friend. Everything is in proper working order except for the wifi. The wifi will endlessly scan, never pulling up any SSIDs.
Click to expand...
Click to collapse
I'll have to look at some logs to ascertain what your WiFi problem is.
Run the commands in this post (after rebooting the tablet) and then post the text files that're created.
rajeevvp said:
I'll have to look at some logs to ascertain what your WiFi problem is.
Click to expand...
Click to collapse
Thanks, see attached are the logs as per request. As a side note, now that I have the terminal emulator on there I tried a few commands I dug up on the internet after I looked over the logs.
Code:
$ su
# ifconfig tiwlan0 up
# ifconfig eth0 up
Both gave an error message
Code:
error: SIOCGIFFLAGS (No such device)
Also
Code:
# svc wifi enable
did not solve my issues. Oh well.
FYI:
JungleWallace said:
...I tried a few commands I dug up on the internet after I looked over the logs.
Code:
$ su
# ifconfig tiwlan0 up
# ifconfig eth0 up
Both gave an error message
Code:
error: SIOCGIFFLAGS (No such device)
Click to expand...
Click to collapse
The wireless LAN interface name on the gTab is wlan0. Hence your error messages: "No such device" for the ifnames tiwlan0 and eth0. (The latter would work for the ethernet I/F on the dock--if you had one connected.)
Also
Code:
# svc wifi enable
did not solve my issues. Oh well.
Click to expand...
Click to collapse
1. You have to look at the Android system logs (using logcat) to see the result of that svc command.
2. Your Android logs indicate that your WiFi interface is a) disabled at startup and b) then not enabled thereafter:
Code:
01-07 23:21:10.429 V/ConnectivityService( 990): Starting Wifi Service.
01-07 23:21:10.429 I/WifiService( 990): WifiService starting up with Wi-Fi [B]disabled[/B]
Suggestions:
Since this now looks like a ROM problem (ie. not HW):
1. See this thread. Run the script to disable Airplane Mode which might be causing your problem. If that doesn't work, try step 2:
2. Boot into CWM and then a) Format /cache and b) Repartition the Internal SD card (take the external one out first).
You'll lose all your current apps and data with this step, essentially reverting to a "fresh" install of your ROM.
Re-setup WiFi, time & date and other things again.
If step 2. doesn't work, report back next year, and I'll give you more commands to run then.
rajeevvp said:
If step 2. doesn't work, report back next year, and I'll give you more commands to run then.
Click to expand...
Click to collapse
Negative. Ran the airplane fix script, nothing. Reset cache/re-partitioned, still nothing. It's still endlessly scanning/shutting off/scanning.
JungleWallace said:
Negative. Ran the airplane fix script, nothing. Reset cache/re-partitioned, still nothing.
Click to expand...
Click to collapse
OK. Not one of the common simple problems, then.
It's still endlessly scanning/shutting off/scanning.
Click to expand...
Click to collapse
This is puzzling because from your last logs, it doesn't look like the wlan kernel driver was even loaded, so no AP scanning should be possible. A little background will clarify what I mean.
On all the 2.6.32.x kernels for the gTablet, the wlan driver is not compiled into the kernel. Instead, it is built as a separate kernel module which is loaded and unloaded as needed by Android (from the files in /system/lib/hw/wlan/). When the wlan driver is loaded both the kernel (dmesg) and Android (logcat) will show some characteristic messages and until the driver is inserted into the kernel no AP scanning, or other wireless functions, should be possible. And, no wlan driver-related messages in your logs tells me that the driver was likely not loaded. (Also, only after the wlan driver is loaded does it check and initialize the wireless HW. So, only after its been loaded, strictly speaking, can we rule out a HW problem.)
Sometimes the Android logs are not complete, so I want to you setup ADB on your PC, enable USB debugging on the gTablet (Setting > Applications > Development) and collect the Android logs like this from now on:
1. Power off gTab; attach the USB cable to it.
2. Open a CMD.exe window on the PC, then run this command (and keep the window minimized):
Code:
C:\> [B]adb logcat -v time > logcat.txt[/B]
After all the tests/commands have been done, restore this window and press Ctrl-C to kill ADB and terminate Android log collection.
3. Power on the gTablet. The ADB command will wait for the gTablet and keep collecting logs on the PC.
Post also the output of these commands:
Code:
C:\> [B]adb shell dmesg > dmesg.txt[/B]
C:\> [B]adb shell lsmod > lsmod.txt[/B]
C:\> [B]adb shell "cd /; find system -type f -print0 | xargs -0 sha1sum" > sha1sum.txt[/B]
Is this the ROM you currently have?
Have you applied the VEGAn 1.00 beta 5.1.1 supplement also?
rajeevvp said:
OK. Not one of the common simple problems, then.
.........
Is this the ROM you currently have?
Have you applied the VEGAn 1.00 beta 5.1.1 supplement also?
Click to expand...
Click to collapse
That was the current ROM I was using. I had not applied the supplement yet, but now I have. Still the same issue. Here are the logs.
JungleWallace said:
That was the current ROM I was using. I had not applied the supplement yet, but now I have. Still the same issue. Here are the logs.
Click to expand...
Click to collapse
In this one I can see the kernel WiFi driver being loaded, and the driver is not reporting any HW chip, SDIO bus, or other errors:
Code:
<4>[ 23.485281] sdio_reset_comm():
<4>[ 23.503617] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 23.676913] Firmware version = wl0: May 17 2010 22:38:50 version 4.218.223.1
<4>[ 23.887647] wlan0: Broadcom Dongle Host Driver mac=e0:2a:82:08:3e:81
<4>[ 23.894047] Enter wl_control_wl_start
<4>[ 23.897864] Exited wl_control_wl_start
<4>[ 23.907103]
<4>[ 23.907109] Dongle Host Driver, version 4.218.223.1
As far as the kernel driver is concrned, everything looks OK, but the Android logs still don't show any SSID associations.
What're the exact outputs of these commands? (You can post a screenshot. Mask the psk= value from the 1st output, if present)
Code:
C:\> [B]adb shell "fgrep -v '#' /data/misc/wifi/wpa_supplicant.conf | tr -s '\n'"[/B]
ctrl_interface=wlan0
update_config=1
...
C:\> [B]adb shell wpa_cli -i wlan0 driver rssi[/B]
...
C:\> [B]adb shell wpa_cli -i wlan0 driver linkspeed[/B]
LinkSpeed [I]nn[/I]
C:\> [B]adb shell wpa_cli -i wlan0 scan[/B]
OK
C:\> [B]adb shell wpa_cli -i wlan0 scan_results[/B]
bssid / frequency / signal level / flags / ssid
aa:bb:cc:dd:ee:ff 2452 185 [WPA2-PSK-CCMP] [I]YourSSID[/I]
Collect also the dmesg and logcat outputs as before.
[/FONT]
rajeevvp said:
What're the exact outputs of these commands? (You can post a screenshot. Mask the psk= value from the 1st output, if present) [...] Collect also the dmesg and logcat outputs as before.
Click to expand...
Click to collapse
See attached. Ignore my syntax errors that I underlined. I was typing wlan instead of wlan0.
JungleWallace said:
Ignore my syntax errors that I underlined. I was typing wlan instead of wlan0.
Click to expand...
Click to collapse
Those are OK since you've corrected them. But, these commands you'll have to redo:
1. In the first command (fgrep ... | tr), you've typed a '/' (forward slash) instead of what I've given in the example, which is a '\' (back-slash) character.
The correct character will remove all those blank lines. But, this is a minor typo compared to:
2. The last 2 commands (wpa_cli scan* ...), which you'll have to redo. This time without the extraneous driver argument (again, see the example)--which turns it into a completely different (and non-existent) command. This is why the output doesn't look like what I've shown.
Instead of typing the commands in manually, select and copy the command lines from the browser and paste them into the shell window.
You might also want to increase the no. of columns that CMD.exe displays: Right-click on the title-bar; choose Properties; select Layout; increase the no. of Columns to, let's say, 150.
3. That dmesg.txt file is not very useful because you've not rebooted the tablet before issuing that command.
The kernel has a fixed-size message buffer, so all the HW initialization messages printed only at system boot will be overwritten by later, and irrelevent, messages as time passes. From the timestamps, it looks like your tablet's been on for a couple of weeks, at least--I can't see any of the earlier boot-up messages.
Hi guys
I have recently just started to learn about adb logcat and i just have a few questions hopefully you guys can help me with
1. the log buffer size 'adb logcat -g' determines how much data is stored. therefore the more i use the handset, the quciker i will loose data in the log from earlier event - thats what I believe is happening?
2. I have used 'adb logcat -b event' and 'adb logcat -b main' - are these reading the logs stored in /dev/log/ ? and if so, what is the difference?
3. When the phone is powered off, all log content is lost - so it appears?
I've found my RD-PQ on the shelf and decided to upgrade it to 2.3
That was a pretty easy procedure, although with 2.3 it's totally empty.
The most discouraging thing is that WiFi fails to connect.
There are several mentions of that problem at https://developer.tizen.org/ru/forums/general-support/tizen-2.3-rd-pq-device-available but no solutions or at least clues there.
Are there any options to debug it?
The only thing I could imagine was to connect to device console in sdb and check wpa_supplicant that was working somehow.
With 2.2.1 WiFi works fine.
What else can be done around it?
Ya need driver isntalled I think. Drivers is non free licensed and ya need to ask for it somewhere in dear Samsung company.
Tolko schas uvidel... Napishi na maemo.su, sprosi u Kirilla, k primeru, bolshe tolku budet. Zdes ne populyaren Tizen.
I have my RD-PQ only since 1 month... so I am newbie...
Since yesterday I saw first time 2.3.1 and WiFi complete not work... not able to find any thing... Scan not finish...
Installed files...
Code:
tizen-2.3.1-mobile_20150921.1_mobile_boot.tar.gz
[B]tizen-2.3.1-mobile_20150921.1_mobile_target.tar.gz[/B]
Then I have only flashed filesystem:
Code:
[B]tizen-2.3-mobile_20150812.1_mobile_target.tar.gz[/B]
So I mixed 2.3.1 Kernel with Filesystem from 2.3... and my WiFi now detect devices + I am able to connect to hidden network.
I need something to install to check if connection is not fake... but for now this is more as 2.3.1
I will later compare...
If usr/apps is bigger difference... between 2.3 and 2.3.1...
Later more...
Best Regards
---------- Post added at 05:28 PM ---------- Previous post was at 04:37 PM ----------
Code:
2.3.1 WiFi not work
sh-4.1# cd usr
sh-4.1# ls
apps etc lib local sbin src tmp
bin games libexec opt share ssl ug
sh-4.1# cd apps
sh-4.1# ls
cert-svc-ui org.tizen.poweroff-syspopup
org.tizen.app-selector org.tizen.quickpanel
org.tizen.bluetooth-share-ui org.tizen.setting
org.tizen.bt-syspopup org.tizen.setting-location
org.tizen.calendar-notification org.tizen.system-signal-sender
org.tizen.crash-popup org.tizen.system-syspopup
org.tizen.crash-viewer org.tizen.task-mgr
org.tizen.data-provider-slave org.tizen.usb-syspopup
org.tizen.datausage-syspopup org.tizen.usbotg-syspopup
org.tizen.download-manager org.tizen.volume
org.tizen.gps-syspopup org.tizen.wallpaper-ui-service-lite
org.tizen.host-devices org.tizen.widget_viewer_sdk
org.tizen.indicator org.tizen.wifi-direct-popup
org.tizen.installer setting-myaccount-efl
org.tizen.lockscreen setting-wifidirect-efl
org.tizen.lowbat-syspopup smartcard-service-server
org.tizen.lowmem-syspopup ug-bluetooth-efl
org.tizen.menu-screen ug-isfsetting-efl
org.tizen.mmc-syspopup ug-setting-mobileap-efl
org.tizen.mode-syspopup wifi-efl-ug
org.tizen.policy
----------------
2.3 WiFi work for me
sh-4.1# ls
cert-svc-ui org.tizen.policy
livebox.web-provider org.tizen.poweroff-syspopup
org.tizen.app-selector org.tizen.quickpanel
org.tizen.bluetooth-share-ui org.tizen.setting
org.tizen.bt-syspopup org.tizen.setting-location
org.tizen.calendar-notification org.tizen.system-signal-sender
org.tizen.crash-popup org.tizen.system-syspopup
org.tizen.crash-viewer org.tizen.task-mgr
org.tizen.data-provider-slave org.tizen.usb-syspopup
org.tizen.datausage-syspopup org.tizen.usbotg-syspopup
org.tizen.download-manager org.tizen.volume
org.tizen.gps-syspopup org.tizen.wallpaper-ui-service-lite
org.tizen.host-devices org.tizen.wifi-direct-popup
org.tizen.indicator setting-myaccount-efl
org.tizen.installer setting-wifidirect-efl
org.tizen.lockscreen smartcard-service-server
org.tizen.lowbat-syspopup ug-bluetooth-efl
org.tizen.lowmem-syspopup ug-isfsetting-efl
org.tizen.menu-screen ug-setting-mobileap-efl
org.tizen.mmc-syspopup wifi-efl-ug
org.tizen.mode-syspopup
sh-4.1# launch_app wifi-efl-ug
... successfully launched
sh-4.1# cd wifi-efl-ug
sh-4.1# ls
bin lib res shared
sh-4.1# cd bin
sh-4.1# ls
wifi-efl-UG
Will try to concentrate on wifi-efl-ug...
Will try to dump both folders from 2.3 and 2.3.1 and compare...
Will also better sort, seems more apps installed...
Best Regards
Pulled from working 2.3 filesystem...
Now I have flashed back to 2.3.1...
Need some time to check content... compare and so on...
Added WiFifrom231rdPQ.rar from 2.3.1 filesystem... NOT work for me.
Short compared and I can see major differences...
Code:
rm -r wifi-efl-ug
Delete in shell work... so I will try to replace folder with content of 2.3...
Later more...
Thanx for this info via PM...
But I can't try self as stupid me killed my RD-PQ...
But maybe someone else find this info usefull...
nice user said:
...I know how to fix the wifi connection on Tizen 2.3 and 2.3.1 for a RD-PQ device. The problem is that some links in the os are not properly created.
Basically you need to install the usleep package (https://download.tizen.org/releases...rmv7l/packages/armv7l/usleep-1-5.2.armv7l.rpm), it's for Tizen 2.2.1, but it does work for 2.3 and 2.3.1. After that, create two links that the wlan.sh shell script is expecting, and are not in the proper location.
ln -s /usr/sbin/modprobe /sbin/modprobe
ln -s /usr/sbin/rmmod /sbin/rmmod
Or, alternatively, you can pull the /usr/bin/wlan.sh file via sdb pull, change the /sbin/modprobe and /sbin/rmmod lines to /usr/sbin/modprobe and /usr/sbin/rmmod.
After doing that, from the phone, open Wifi and clicking on the green button will activate the wifi correctly and you will be able to connect to any wifi hotspot.
You can skip using the ui and perform the following commands :
/usr/bin/wlan.sh start
this will activate the wlan0 interface, which you can check by issuing a ifconfig command.
/usr/sbin/wpa_supp.sh start
this will start wpa supplicant.
Check if connmand is running (ps -ax and check the list), if not, you need to do :
systemctl start connman
systemctl enable connman
Click to expand...
Click to collapse
Thank you very much for this hint. :good:
Best Regards