Although there are many solutions for this problem on the internet, none seems to work for me.
I am unable to unlock the Reactivation Lock on my Samsung Galaxy S6, although I use the correct Samsung account. The ‘on’ button does not move at all.
These are the specs. The phone is not rooted (I'm trying to root the phone but it seems as if this problem is preventing me from rooting the phone, install TWRP and upgrade to Oreo.)
Android version 7
Broadband version: G920FXXU5EQB3
Build number: NRD90M.G920FXXU5EQBA
This is not the official Nougat OTA update
Could someone please advise or direct me to a post/article?
Related
I haven't seen anything concerning FRP around the site for the past couple months, I was wondering if anything new has popped up.
I've tried all the older methods, which have all been shut down by the latest update, and I cant root or flash a custom rom now because my bootloader is locked.
I'm just looking for anything that could help so I don't have to wait for the next couple days for my phone again..
Thanks in advance!
There is no universal method. It all depends on the update, phone, and carrier that it's from.
FRP Bypass methods not working on SM-T377W
I have recently purchased a second hand Samsung Galaxy Tab E (SM-T377W) from kijiji in Canada, but, to my dismay the FRP has been tripped. I have tried to follow ashyx and rootJunkie but even with an otg cable I am not able to access the settings/browser.
I have searched everywhere (I can think of) but am unable to find a stock firmware. any assistance would be appreciated.
Device:
Name: Samsung Galaxy Tab E
Model: SM-T377W
F/W: MMB29K.T377WVLU2API2 (gtesltebmc)
Country: Canada
I'm not sure what other info is useful, so I will reply as prompted.
Thanks in advance
Me too
Me too bud, the Sm-377w is locked down tight. Have tried everything. EMail me [email protected] if you have any answers
Hello everyone,
i successfully unlocked neighbors S8+ from OEM Lock and Google FRP Lock.
Now the older brother asked if i can try it with his Galaxy S6 Edge, but i can't disable the Reactivation lock.
He doesn't have an Samsung Account (at least he says so).
The phone is on G925FXXU6ERF5 (Android 7) and only the Samsung Reactivation Lock is enabled.
What i tried so far:
1.
Installed other firmware over Odin (I think i tryed about 20, including one that is Android 6)
Always flashed combination rom between the different roms.
Trying to install TWRP end with "Blocked by R/L".
Trying to install older firmware then "U6" ends with the error: "Device: 6 Binary x"
2.
Installed Samsung Account over adb in combination rom and created an account there. I have an Samsung account now with the S6 Edge and even the IMEI, but when i boot into Stock Rom findmymobile always says, couldn't locate your phone. Using this account to log in on the phone ends with "Wrong password or id".
3.
Tried every youtube video: "Bypass Samsung reactivation lock" that is out there. (Emergency call and so on..., they seem to be all outdated).
I have no more ideas what i can try. Any help ?
Best regards
No one?
I write this post in the last hope of getting help from the community. I recently inherited an old Galaxy A7 2016 (A710F) android 6 version with A700FXXU2BPK1 base band version. The phone belonged to my mom, so I didn't think about it and did a system reset and deleted everything. Now I have a "100%" clean phone. The fact is that I would like to change the ROM with a lineage os. I can't proceed because when I unlock the developer options and activate the USB debugging according to the official guide, the "OEM unlock" item does not appear. This item is essential to flash the bootloader and have root permissions. I also tried to enter both my gmail and samsung account, but this option does not appear. I checked and in my galaxy S9 plus it is present. Do you have any suggestions on how to proceed, bring up the entry or root? A link with a guide is also fine. I have made many attempts and no guide seems to work, without that checkbox I do not proceed. I also tried the "trick" of postponing the date and time but it didn't work. then I can't install TWRP and proceed. As a last attempt I tried with odin but obviously I can't flash the bootloader because that box is not active. I trust in you.
Cheers
Hello, guys, I have a galaxy A10 in which it does not appear oem unlock, I've tried all the tutorials on the internet but none of them work, I have this device since the launch in Brazil, at the time it was android 9, and this oem unlock option always appeared, but as at the time it didn't have a custom rom yet (or I haven't found any) I left it disabled, now in 2021 I saw several custom rom for my device, but after upgrading to android 10, I was no longer able to have the option of oem unlock, I will pass the current configuration of my device.
Galaxy A10 (105M/DS)
Android 10
security patch March 1, 2021
build number A105MUBS6BUC2
is there any way to still be able to root and unlock the bootloader?
I don't care if I have to install rom from other countries, I just want to be able to root and install custom roms.
About the tutorials I saw on the internet, they were just the most common ones like delaying the date and looking for an update, I saw a tutorial in which the person left and entered the developer settings until it appears, I already did a hard reset and tried to make oem unlock appear with all the tutorials.
lTheuSl said:
Hello, guys, I have a galaxy A10 in which it does not appear oem unlock, I've tried all the tutorials on the internet but none of them work, I have this device since the launch in Brazil, at the time it was android 9, and this oem unlock option always appeared, but as at the time it didn't have a custom rom yet (or I haven't found any) I left it disabled, now in 2021 I saw several custom rom for my device, but after upgrading to android 10, I was no longer able to have the option of oem unlock, I will pass the current configuration of my device.
Galaxy A10 (105M/DS)
Android 10
security patch March 1, 2021
build number A105MUBS6BUC2
is there any way to still be able to root and unlock the bootloader?
I don't care if I have to install rom from other countries, I just want to be able to root and install custom roms.
About the tutorials I saw on the internet, they were just the most common ones like delaying the date and looking for an update, I saw a tutorial in which the person left and entered the developer settings until it appears, I already did a hard reset and tried to make oem unlock appear with all the tutorials.
Click to expand...
Click to collapse
I forgot to mention, when I go into download mode, instead of being in the prenormal, mine is in normal.
lTheuSl said:
I forgot to mention, when I go into download mode, instead of being in the prenormal, mine is in normal.
Click to expand...
Click to collapse
Same issue, A107m (a10s) mtk doesn't show the oem unlock after a11 update and i can't find a solution (it is on kg state normal)
hi all,
I have Samsung SM-G935W8 (in Canada), bought used from someone. recently, try to play with android, and realized the phone PDA was G935UUEU4BRD1, and model was SM-G935U which is different from the model that showing on back cover. think the guy flashed a different rom for this phone.
couple days ago, I did hard factory reset for no reason, and get google account locked. then search online and learning how to fix it. seems like need to flash combination rom --> use tool bypass frp --> flash official rom to solve this issues.
i downloaded many combination firmware and all failed on odin flash. until i use one that allowed me to flash and success to open the phone as Factory Binary. But, I noticed the phone model changed to SM-G935A, which is AT&T firmware. the android version is 6.0.1, when I try to run program to do FRP bypass, no luck, think that because I can't turn on OEM- Unlock option(can't find it on developer option tough)? or bootloader locked?
now, I can only flash official rom that from AT&T, and android 8 that I can find it. if the phone can be fixed FRP issues, model change to G935A is fine, I dont care that model, I dont use the phone for call, only for wifi and camera. and maybe later can play flash to other model of ROM. not sure if possible.
current, the working combination rom I flashed is PDA : G935UUCUBATA1
ADB FRP to bypass FRP (not working)
and flashed to AT&T rom PDA: G935AUCUBCTB1_G935AATTBCTB1_8.0.0
FRP still not bypassed, and stuck on google account validation screen. any advice how and what tools can bypass FRP for this phone now model is SM-G935A? thanks in advance!