Dear, My phone has been dead it's don't boot into download or recovery mode when I connect it to the
laptop it's shown as Qualcomm HS-USB QDLoader 9008, I have been tired to search for resolve this problem
I need full support please, like make sd card boot, and the file that I need it to repair emmc also explain how to do all things
because I have no idea to how to do it, thanks in advance for all :laugh::laugh:
Related
Galaxy S3 won't turn on but is detected by PC as "relink hs-usb qdloader 9008"
Hi everyone! I was given a Galaxy s3 recently, the SC-06D variant but it doesn't turn on no matter what. It won't boot into recovery or odin mode.
However, when I plug it in the PC its detected as "relink hs-usb qdloader 9008". Is there any way to fix my phone? If so what should I do?
Any help would be appreciated
Looks like the phone is hard bricked. You could try to revive the phone by booting with a boot image from an SD card and then try to flash a stock ROM.
Alternatively, you could try a cell shop that can force flash the stock firmware.
No power at all means only jtag can recover it. Dead phone. Time to upgrade.
However, if your pc is detecting it then the board is alive but may not be in a recognisable state. You might be best looking for a bootloader for that particular board (the same as the factory would use to get the firmware on it in the first place). See this: https://goo.gl/qFcdsF
Beamed in by telepathy.
shivadow said:
No power at all means only jtag can recover it. Dead phone. Time to upgrade.
However, if your pc is detecting it then the board is alive but may not be in a recognisable state. You might be best looking for a bootloader for that particular board (the same as the factory would use to get the firmware on it in the first place).
Beamed in by telepathy.
Click to expand...
Click to collapse
Will try this method right now. Thanks a lot
sir,i tried flashing stock firmware in my lyf wind 1 powered by qualcomm snapdragon 410 processor with 1200mhz clocking speed and download went good but mobile didn't switch on so I tried plugging in charger it didn't show led indicator so I connected my device to my pc then
1.device shown as QUALCOMM qh-usb diagnostics 9006 mode
2.boot partitions are shown up as drives
3.in disk management my phones emmc is shown as DISK 1
I installed some qualcomm drivers which are unsigned and was able to make my device show up as QH-USB QDLOADER 9008 MODE
now when I tried flashing with qfil it is saying like DOWNLOAD FAIL:SAHARA FAIL
I am so worried whether I can recover my device or not so I am asking tech savvy(like you) who can help me.
If you need any further details I am always there to provide info kindly help me.....
thanks in advance
[email protected]
Hey all,
I am looking for a working unbrick,img for a hard bricked G900v that currently doesnt go into recovery mode or download mode. Windows recognizes the device only as Qualcomm HS-USB QDLoader 9008.
I honestly dont remember what version BL or FM i flashed it with last and I have been searching for days online and through xda-dev for versions of unbrick images to mount onto my sd card to enable it to get to download mode so I can try and revive this device.
I have tried PD1, NCG, among the ones i remember, none of which have worked.
Can someone help?
Hi,
I have an hard bricked ASUS ZB501KL with the whole eMMC erased, actually very hard bricked shall we say.
Now my phone is recognized as Qualcomm HS-USB QDLoader 9008 (it goes automatically in this mode without pressing any button) and whenever I plug in the USB Port(S) I get a BSOD, and that happens on all the PCs I've tried (they don't even boot while the phone is attached), so it may be an hardware problem. In usbdeview the device is shown as deactivated and I can't enable it.
Does anyone know how can I activate it? If so, may it be that my device does not go "legitimately" in this mode because of the completely erased eMMC? Thanks for all your replies...
I have a tremendous problem in an update the platinum mi 8 lite has erased from nothing I can't go into fastboot or recovery a brick. My computer recognizes the USB cable more like Quualcomm HS-USB QDLoader 9008 (COM3) and everything and nothing. Any tips thanks and maybe a step by step tutorial to resolve this situation thanks, Thanks.
rinampa said:
I have a tremendous problem in an update the platinum mi 8 lite has erased from nothing I can't go into fastboot or recovery a brick. My computer recognizes the USB cable more like Quualcomm HS-USB QDLoader 9008 (COM3) and everything and nothing. Any tips thanks and maybe a step by step tutorial to resolve this situation thanks, Thanks.
Click to expand...
Click to collapse
There is no one who can help me help me in this matter the device has turned into a brick and it is brand new, please just indicate something, thanks, I think if anyone can help, thanks