I have a tremendous problem in an update the platinum mi 8 lite has erased from nothing I can't go into fastboot or recovery a brick. My computer recognizes the USB cable more like Quualcomm HS-USB QDLoader 9008 (COM3) and everything and nothing. Any tips thanks and maybe a step by step tutorial to resolve this situation thanks, Thanks.
rinampa said:
I have a tremendous problem in an update the platinum mi 8 lite has erased from nothing I can't go into fastboot or recovery a brick. My computer recognizes the USB cable more like Quualcomm HS-USB QDLoader 9008 (COM3) and everything and nothing. Any tips thanks and maybe a step by step tutorial to resolve this situation thanks, Thanks.
Click to expand...
Click to collapse
There is no one who can help me help me in this matter the device has turned into a brick and it is brand new, please just indicate something, thanks, I think if anyone can help, thanks
Related
Help please, need a working full or bootloader for the Samsung SCH-i545. When using dll resurektor terminal does not animates when you connect a USB terminal in the task manager is defined as Qualcomm HS-USB QDLoader 9008. Help please. Sorry for my english.
ducha99 said:
Help please, need a working full or bootloader for the Samsung SCH-i545. When using dll resurektor terminal does not animates when you connect a USB terminal in the task manager is defined as Qualcomm HS-USB QDLoader 9008. Help please. Sorry for my english.
Click to expand...
Click to collapse
That message usually defines a hard brick and requires J-Tag.
Solution
prdog1 said:
That message usually defines a hard brick and requires J-Tag.
Click to expand...
Click to collapse
Was used Riff Box .... read part of the firmware 128MB.
Software version I545VZWEMJ7.
The image is recorded in a dead phone.
After turning the phone in download mode.
I think i bricked my phone (Samsung Galaxy Express 2) i think it's a soft-brick. i can't turn my device on or enter recovery or download mode, but my computer recognises my device as Quadcomm HS-USB QDLoader 9008. I've been searching the web for ages and i can't find anything. i hope someone can help me unbrick my phone.
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
il183690 said:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
Click to expand...
Click to collapse
This works for people who are able to get to fastboot. I am not able to get to fastboot at all. Only EDL. Please help. Any other alternative?
Can you please check this thread.
I hope this helps.
You remind me of myself
I did the same thing in April and had to go to service center as i couldnt make it work that time, they fixed it within 24hours
But now there are lots of recovery methods that u could try
Zed4u said:
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
Click to expand...
Click to collapse
Try deep flash methode, just need to buy deep flash cable in market. For the guidance, please try to googling it in miui forum due to already available there.
Yesterday, one of my friend succesfull to restore her kenzo from diagnostic mode and really happy with the result.
Try the simple deep flash method mentioned here -
http://en.miui.com/thread-310325-1-1.html
I was able to recover my rn3 from 900e mode using this.
It's very simple and easy. You just need a copper wire strand to do it.
Use Deep Flash Method
I had the exact same problem so I tried deep flash method. It worked and my phone was detected by the PC as 9008. Then I could flash the fastboot rom using Miflash tool. Hope this helps.
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-fix-totally-dead-redmi-note-4-t3746465/page1
Hope it helps you
Sent from my mido using XDA Labs
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
1. Remove the back panel then the battery connector. Keep it in that way for a while like a minute
2. Then short either the 'most effective points' or 'less effective points' following this thread . While keeping them short, connect the USB cable to the Computer, it will enter into 'download' mode suitable for miFlash/QFIL
Hello, I have a serious problem, while installing rom in TRWP something went wrong, and phone is black all time. When I connect a cable to usb port, computer shows it like "Qualcomm HS-USB QDLoader 9008" Is it possible to fix it?
Thanks for all replies
problemak said:
Hello, I have a serious problem, while installing rom in TRWP something went wrong, and phone is black all time. When I connect a cable to usb port, computer shows it like "Qualcomm HS-USB QDLoader 9008" Is it possible to fix it?
Thanks for all replies
Click to expand...
Click to collapse
Send it to LG.
Sent from my LG-H932 using XDA Labs
Just saw H930 . I know eBay has a few services to fix it for around 20