Hi guys,
As seen over the forum few times, there are some users that got their serial numbers NULLed after unlocking, re-flashing, cross-flashing and god know why it happened.
There's a solution for this issue, those who suffering from the NULL in their SN, please reply with the following:
1. Model
2. Bootloader status
3. Current rom on the device
there is no automated solution, so it will be handled personally for any case.
Thanks to @Saratoga79 for mental and other weird stuff support
Thanks to @Neuer_User for a lot of stuff
Thanks to @S3V3N for his backup and restore script
Thanks to mom for not killing me at some early life stages, you're the best!
I recommend it
Hello i have the serial no null and bootloader closed
1. model: amazfit pace 2
2. Bootloader status: closed
3. Rom: 0.9.50
Luiso127 said:
Hello i have the serial no null and bootloader closed
1. model: amazfit pace 2
2. Bootloader status: closed
3. Rom: 0.9.50
Click to expand...
Click to collapse
0.9.5 !?!??! what have you flashed on it ?
Luiso127 said:
Hello i have the serial no null and bootloader closed
1. model: amazfit pace 2
2. Bootloader status: closed
3. Rom: 0.9.50
Click to expand...
Click to collapse
I guess you followed the Unbrick thread for Amazfit 1/Pace, and installed Stock 0.9.5 CN Firmware, which means you don't have root access, which also means that you can't restore your watch, AFAIK.
Saratoga79 said:
I guess you followed the Unbrick thread for Amazfit 1/Pace, and installed Stock 0.9.5 CN Firmware, which means you don't have root access, which also means that you can't restore your watch, AFAIK.
Click to expand...
Click to collapse
You have the reason. I had the watch locked and to restore it i used the unbrick process. but i didn´t think that i had to push the stratos roms. Now i need any way to reflash the boot or open the bootloader. i have my original unlock code but how the watch don´t have serial it don´t unlock it
i have a complicated situation. Could you help in these ways
I have the same problem !!
Luiso127 said:
You have the reason. I had the watch locked and to restore it i used the unbrick process. but i didn´t think that i had to push the stratos roms. Now i need any way to reflash the boot or open the bootloader. i have my original unlock code but how the watch don´t have serial it don´t unlock it
i have a complicated situation. Could you help in these ways
Click to expand...
Click to collapse
I have the same problem too. the clock starts, but when you scan the qr code, the touch screen does not work.
1. model: amazfit pace 1
2. Bootloader status: closed
3. Rom: STRATOSfied_rel_4_(2.0.13.0)
1. Model - A1612
2. Bootloader status - Unlocked
3. Current rom on the device - HuangHeUS - 1.3.5
andysebli said:
1. Model - A1612
2. Bootloader status - Unlocked
3. Current rom on the device - HuangHeUS - 1.3.5
Click to expand...
Click to collapse
I don't know what your problem is but you should check this thread, if your bootloader is unlocked.
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-firmware-installers-2017-t3725494
Saratoga79 said:
I don't know what your problem is but you should check this thread, if your bootloader is unlocked.
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-firmware-installers-2017-t3725494
Click to expand...
Click to collapse
Thanks for your promot reply. My problem is only with the serial number. So far the fw is ok. But unfortunately the gps and the rest of the sensor now is not working. Could it be because of the serial issue?
The sensor loss the functionality after load with the latest firmware
Hi, masters!
This is my watch status right now:
1. Model Amazfit Stratos A1609
2. Bootloader status:
(bootloader) serialno: null
(bootloader) product: watch
(bootloader) secure: yes
(bootloader) unlocked: no
3. Current rom on the device: How can I now? I think by mistake I use the Stock 1.3.5 'cos I wanted the Multilanguage with Strava :crying:
Do you know how I can to restore the serial no?
Thanks in advance!
1immortal said:
Hi guys,
As seen over the forum few times, there are some users that got their serial numbers NULLed after unlocking, re-flashing, cross-flashing and god know why it happened.
There's a solution for this issue, those who suffering from the NULL in their SN, please reply with the following:
1. Model
2. Bootloader status
3. Current rom on the device
there is no automated solution, so it will be handled personally for any case.
Thanks to @Saratoga79 for mental and other weird stuff support
Thanks to @Neuer_User for a lot of stuff
Thanks to @S3V3N for his backup and restore script
Thanks to mom for not killing me at some early life stages, you're the best!
Click to expand...
Click to collapse
Hi i installed Stratos ROM insttead (https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-international-firmware-t3764636).
The touch is not working
1. AMAZFIT A1602
2. Unlocked
3. "stock"
Thanks
neonoafs said:
Hi i installed Stratos ROM insttead (https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-international-firmware-t3764636).
The touch is not working
1. AMAZFIT A1602
2. Unlocked
3. "stock"
Thanks
Click to expand...
Click to collapse
Follow this tutorial for fix:
https://forum.xda-developers.com/smartwatch/amazfit/guide-restore-null-sn-locked-t3775998
Hi
1immortal said:
Hi guys,
As seen over the forum few times, there are some users that got their serial numbers NULLed after unlocking, re-flashing, cross-flashing and god know why it happened.
There's a solution for this issue, those who suffering from the NULL in their SN, please reply with the following:
1. Model A1609
2. Bootloader status - locked bootloader
3. Current rom on the device - Stock
Click to expand...
Click to collapse
iembo said:
1. Model A1609
2. Bootloader status - locked bootloader
3. Current rom on the device - Stock
Click to expand...
Click to collapse
This thread is deprecated, please follow this tutorial for a possible fix (as your bootloader is locked, if you still have root access from previous ROM, maybe it's possible to fix):
https://forum.xda-developers.com/smartwatch/amazfit/guide-restore-null-sn-locked-t3775998
1immortal said:
Hi guys,
As seen over the forum few times, there are some users that got their serial numbers NULLed after unlocking, re-flashing, cross-flashing and god know why it happened.
There's a solution for this issue, those who suffering from the NULL in their SN, please reply with the following:
1. Model
2. Bootloader status
3. Current rom on the device
there is no automated solution, so it will be handled personally for any case.
Thanks to @Saratoga79 for mental and other weird stuff support
Thanks to @Neuer_User for a lot of stuff
Thanks to @S3V3N for his backup and restore script
Thanks to mom for not killing me at some early life stages, you're the best!
Click to expand...
Click to collapse
Hello i have the serial no null and bootloader closed
1. model: amazfit pace 2
2. Bootloader status: closed
3. rom 1.35
Ftpcat said:
Hello i have the serial no null and bootloader closed
1. model: amazfit pace 2
2. Bootloader status: closed
3. rom 1.35
Click to expand...
Click to collapse
Again, this is not the correct thread anymore. If you want latest support, go here: https://forum.xda-developers.com/smartwatch/amazfit/guide-restore-null-sn-locked-t3775998
1. Model PACE - A1602
2. Bootloader status - Locked
3. StratosFied
null serial, adb devices ok but not shell
iznogoud! said:
1. Model PACE - A1602
2. Bootloader status - Locked
3. StratosFied
null serial, adb devices ok but not shell
Click to expand...
Click to collapse
Check previous post.
Related
Hi dear,
İn Turkey genius men TESTANDROİDX, He solution Imei repair problem, You can find on google " TESTANDROİDX "
very intersting,
Now I follow him and try to Iuni U3 phone İmei repair problem I will write here what happens
Yes it it work,
thanks for him
You can use DFS
Need Help to change IMEI
osmanselim said:
Hi dear,
İn Turkey genius men TESTANDROİDX, He solution Imei repair problem, You can find on google " TESTANDROİDX "
very intersting,
Now I follow him and try to Iuni U3 phone İmei repair problem I will write here what happens
Click to expand...
Click to collapse
Dear Osman, ASA
I just received my IUNI U3 yesterday, and I have a problem that GSM SIM slot is not working with any operator in Egypt. Also when inserting both the SIMS togather it looses signal for 4G/3G SIM :'(
I used to face such troubles with my JIAYU G3 and I changed IMEIs to fix it, but do not know how to do this with Snapdragon dual SIM phone???
I tried TESTANDROİDX posts on AndroidBrick, but there are many and all in Turkish? Can you please tell me which post/posts exactly you followed? I can use google translate to try them!
PLEASE HELP
Regards
Ibrahim Gamal
*(SOLVED
Hi,
I could change one IMEI with the instructions of TESTANDROIX in androidbrick.com blog, which was in Turkish Thanks to google translate..
prof_mastermind said:
Hi,
I could change one IMEI with the instructions of TESTANDROIX in androidbrick.com blog, which was in Turkish Thanks to google translate..
Click to expand...
Click to collapse
esselamin Aleyküm
Kardeşim İbrahim,
I am so sory for late answer
But Nice to meet you, What about Iuni U3, mine u3 2 days ago coming new update and my phone come back recovery mode, I send My phone TESTANDROIX, he is professional, I trusth him ,
can you send me email adress I want to chat for Iuni
Selametle,
Alpay
osmanselim said:
esselamin Aleyküm
Kardeşim İbrahim,
I am so sory for late answer
But Nice to meet you, What about Iuni U3, mine u3 2 days ago coming new update and my phone come back recovery mode, I send My phone TESTANDROIX, he is professional, I trusth him ,
can you send me email adress I want to chat for Iuni
Selametle,
Alpay
Click to expand...
Click to collapse
Alaykom Alsalam
I sent you email from gmail and hope to listen from you. I will send you my email in a message in case you could not find my email first.
I follow Him he is professional all subject My IUNI U3 Brick, He was solution,
My favorit men
TESTANDROİDX,
Have a long life
Hello.
I have a iuni u3 since few days now, and have also imei problem (conflict with 2 sim simultaneously)
I looked for TESTANDROIX post, and found it but didn't understand what to do...
Can you give me some hints? Or the exact url that helped you?
Regards
And what exactly is the password for the post?
You Can solve IMEI and SN Problem using This guide also
Recently I downgraded my Lenovo Vibe K5, I Lost IMEI and SN, Bluetooth, Wifi Address then i used this method to solve the problem:
Fix Invalid IMEI and SN issue of Qualcomm Smartphones
skyuvraj said:
Recently I downgraded my Lenovo Vibe K5, I Lost IMEI and SN, Bluetooth, Wifi Address then i used this method to solve the problem:
Fix Invalid IMEI and SN issue of Qualcomm Smartphones
Click to expand...
Click to collapse
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
I'm testandroidx by the way
NEED HELP.
I have every single thing that i find on internet but not a single method was able to repair my imei number can anyone tell me a working method for repairing qualcomm imei number?
Definitely works no problem with mine.
uxamahaxxan said:
I have every single thing that i find on internet but not a single method was able to repair my imei number can anyone tell me a working method for repairing qualcomm imei number?
Click to expand...
Click to collapse
@ uxamahaxxan,
After the last couple of days convinced that I had bricked my Lenovo P2, but using this guide above: OS_Man - I sorted it in a couple of hours by backing up my wife's P2 using the QPST software backup option, then used the Hex editor to overwrite the .QCN file with my IMEI and restored the altered original. No problem.
Is it possible to change IMEI for OnePlus 5T?
Hi. I need to change my phones IMEI numbers (LeEco Cool1 Dual - C106). Can you help me with the easiest way?
skyuvraj said:
Recently I downgraded my Lenovo Vibe K5, I Lost IMEI and SN, Bluetooth, Wifi Address then i used this method to solve the problem:
Fix Invalid IMEI and SN issue of Qualcomm Smartphones
Click to expand...
Click to collapse
os_man said:
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
I'm testandroidx by the way
Click to expand...
Click to collapse
Does mobile need to be rooted and bootloader unlocked to follow this procedure?
I need to restore IMEI numbers of redmi 5 plus which is not rooted and it's bootloader is locked, means it's completely stock.
harpy.eagle said:
Does mobile need to be rooted and bootloader unlocked to follow this procedure?
I need to restore IMEI numbers of redmi 5 plus which is not rooted and it's bootloader is locked, means it's completely stock.
Click to expand...
Click to collapse
Yes, if you want to do it yourself with PC, you need root.
os_man said:
Yes, if you want to do it yourself with PC, you need root.
Click to expand...
Click to collapse
I could re instate imei numbers to my phone by opening diag port using ussd code. But still mobile isn't showing any network reception.
Imei sv number though look suspicious. It's showing as 01 where as all mobiles at home are showing it as 00. Don't know if that's the cause of issue. Also don't know whether and how I can change them.
HUAWEI MediaPad T3 10 LTE/4G
AGS-L09
FIRMWARE:
SERVICE FIRMWARE
http://combinefile.com
https://easy-firmware.com/home/browse/category/id/25975
ROOT
(1) See here ????
(2) TWRP AGS-W09 can be used to root (Magisk v14.0) but don't think backup\restore works. Or HERE (uploaded by a Russian dude for me as I can't create a login for the forum).
ENABLING PHONE CALLS: NO SOLUTION YET.
Phone calls are disabled on Vodafone (text works). No Dialer and it does not work with 3rd party or google dialers.
OEMINFO
NONE SHARED - May be it's different with Qualcomm processor - see https://forum.xda-developers.com/showpost.php?p=78744756&postcount=163 ?
HUAWEI MediaPad T3 8" LTE/4G
KOB-L09
OFFICIAL FIRMWARE: NONE YET
OTHERS:
combinefile FREE
easy-firmware - PAID - Never Used them
ROOT
TWRP
To get Backups working Download ASSAYYED_KITCHEN and follow instruction here. I would assume it would be the same for AGS-L09. And hopefully someone can share the OEMINFO backup (as far as I know, no information unique to your device are shared like IMEI, etc).
ENABLING PHONE CALLS: NO SOLUTION YET.
Phone calls are disabled on EE UK firmware KOB-L09C238B002 (text works). No Dialer and it does not work with 3rd party or google dialers. Confirmed to be working on O2 UK (KOB-L09C105B003).
Quick info for 1st timers
Before rooting, you need to unlock bootloader for any Huawei / Honor devices.
Once you got the code Download\Install Minimal ADB and Fastboot
Now connect your Huawei device to the PC with a USB cable. (Give it required permission)
Boot your Huawei device into bootloader mode using the following command:
Code:
adb reboot bootloader
Once your device is in bootloader mode, issue the following command to unlock bootloader:
Code:
fastboot oem unlock your-unlock-password
Use the Vollume Up/Down key to select yes and power key to confirm - bootloader is unlocked now and phone will reset.
TOOLS
Huawei Update Extractor - to unpack and extract the contents of the UPDATE.APP that contain image's firmware.
AGS-L09 - Huawei MediaPad T3 10
Returned the HUAWEI MediaPad 8" T3 4G (Model KOB-L09, Android 7/) tablet now but gone crazy and bought a Brand New T3 10" from ebay (AGS-L09, Firmware AGS-L09C127B031 CUSTC127D002). This is on Vodafone UK Network but same issues as EE - no dialer. srsroot says it can be rooted but bit risky as I have never used that tool before, especially when I am unable to find any non Chinese FULL firmware yet. Any one tried this tool before?
I have a feeling that all the UK network remove the dialer (most likely using the same firmware) - wondering which firmware (English) supports phone calls (review on notebookcheck.net says its actually quite good). I guess oeminfo is needed to flash a different regional firmware?
Man I'm in the same boat as you're I need to root my Huawei AGS-L09 but no avail hope some day we can find a way to do it with the help of the xda genius members!
By the way I can make phone calls on mine
Thanks Mercer99, as per other thread, appreciate it (for your device security, can you remove the image as this has your IMEI)- we have the same model, but different firmware.
AGS-L09C199B002 is “Saudi Arabia Oman Kenya Cameroon Jordan Qatar Ghana Android 7.0 EMUI 5.1” region.
AGS-L09C127B031 is “Greece Hungary United Kingdom Nonspecific Android 7.0_EMUI” . The dialer/calling function is disabled on this firmware - confirmed on Vodafone and EE network.
Is there any way you can extract the OEMINFO from your device and share it with us. This should enable me to debrand the phone if I can find your firmware (downloaded EUROPEAN version with Firmware finder already – so really need an European OEMINFO).
My phone is still locked to Vodafone so I am not sure whether I can flash the firmware or even need root to flash a different OEMINFO (bootloader is unlocked already).
Rooted
Took a risk and its rooted now - Magisk v14.0 installed fine and seems to be working (need to test further). Also, Vodafone unlocked the device now for me
Challenge now is to debrand so as to enable functions which has been disabled by Vodafone (namely calling).
Would appreciate if anyone can help - need OEMINFO from another region so as to change the firmware, especially European one or even other UK network who does not disable calling.
Could not contain myself…. In my quest to debrand so I can have a dialer/phone calling function, downloaded a firmware (either from FF Team or on the internet), tried flashing system.img file to see if it installs the dialer as it would not install extracted ones and it did not work. So tested with the boot.img and it did work but phone kept rebooting to eRecovery.
Restoring from TWRP (incomplete/untested) backup did not work. Can’t install any other regional firmware because of OEMINFO. eRecovery can’t find any firmware. The only thing – TWRP/Stock Recovery, eRecovery or bootloader!
Chatted with Huawei support and they won’t give me a link to download the firmware – want me to send for repair, which I don’t really want to – too much hassle and they may end up blaming me anyway….lol He agreed to upload one to their website if he can find one.
I would appreciate if anyone can give me an OEMINFO or link to EUROPEAN firmware with a dialer….. I think European one is AGS-L09C127B031CUSTC127D002 – would appreciate if anyone can share the file with me.
Managed to source the Vodafone UK now firmware now - thanks to combinefile.com
The only think remaining is to enable the enable the dialer now – can someone help? Either a guide to enable within Vodafone firmware or share an OEMINFO and detail of a UK/European firmware that has a dialer enabled (i.e. can make calls) would be much appreciated.
ROOT
(1) See here ????
(2) TWRP AGS-W09 can be used to root (Magisk v14.0) but don't think backup\restore works.
Click to expand...
Click to collapse
did someone used the first method ("How to install Magisk with ADB") and root the tablet with success?
do i have to unlock my bootloader on huawei site even with that root procedure?
is there a working TWRP for this model?
i have a AGS-L09C100B011, it's an european firmware for sure
if you found it useful let me know what to do
501st said:
did someone used the first method ("How to install Magisk with ADB") and root the tablet with success?
do i have to unlock my bootloader on huawei site even with that root procedure?
is there a working TWRP for this model?
i have a AGS-L09C100B011, it's an european firmware for sure
if you found it useful let me know what to do
Click to expand...
Click to collapse
I am not sure if anyone has tried but check the 4pda.ru forum (I have been using google translation) lol
It should work with a locked bootloader.
TWRP - I have updated the link now to 4pda.ru forum. I have used that to root my model. I don't think restore (and backups) works. Of course, you need blootloader to be unlocked first.
Does your AGS-L09C100B011CUSTC100D002 have a dialer and can you make calls? I need the firmware and may be OEMINFO /Cust - not exactly sure how it works on a tablet. But it certainly needs something else to be changed.
buddimanv said:
Does your AGS-L09C100B011CUSTC100D002 have a dialer and can you make calls? I need the firmware and may be OEMINFO /Cust - not exactly sure how it works on a tablet. But it certainly needs something else to be changed.
Click to expand...
Click to collapse
yes i have a dialer.
in the dealer if i type *#*#2846579#*#* it goes in the ProjectMenu -> 3. Network Information Query -> 2. SIM Lock Info -> it says simlock_deactive
I will not do anything to my device by now. i will wait for a complete guide without any risk since i'm a noob.
Tutorial please..
Please show me the tutorial to root my Mediapad T3 8.0 KOB-L09...
OneMoment Studios said:
Please show me the tutorial to root my Mediapad T3 8.0 KOB-L09...
Click to expand...
Click to collapse
KOB-L09 TWRP Here - I should be getting a new KOB-L09 to play end of this week,
In case this info is useful to anyone, I just got one of these from O2 and the dialler is preinstalled on the device. I've not tried using a regular SIM to make calls from it but the feature doesn't seem to be blocked. I can open the dialler and see the keypad etc.
Not a bad little tablet this, it needs an update to the latest security patches as it's still on July and the default launcher is crap (easy to install Nova of course) but otherwise very good for the price having Android 7.0, a Snapdragon, and LTE for £100. Stuck a MicroSD in there and filled it with movies to watch on the go.
Hexgor, can you confirm the firmware version and are you able to upload the dialer apk files for us, may be it just needs to be installed....thanks
Thanks
Thanks, now my KOB L09 is rooted with Magisk in Twrp..
OneMoment Studios said:
Thanks, now my KOB L09 is rooted with Magisk in Twrp..
Click to expand...
Click to collapse
Cool, I managed to root it as well now - my firmware has no dialer (EE UK KOB-L09C238B002). Do you have a dilaer on your phone? If yes, can you share the firmware info (also, OEMINFO if possible), thanks
501st said:
yes i have a dialer.
in the dealer if i type *#*#2846579#*#* it goes in the ProjectMenu -> 3. Network Information Query -> 2. SIM Lock Info -> it says simlock_deactive
I will not do anything to my device by now. i will wait for a complete guide without any risk since i'm a noob.
Click to expand...
Click to collapse
Updated main post - you need to dial *#*#1357946#*#* to get Product ID and Serial number.
Custom ROM
Can you please give or port any Custom Rom with Nougat or Oreo for my Huawei MediaPad T3 8.0 (KOB-L09)
OneMoment Studios said:
Can you please give or port any Custom Rom with Nougat or Oreo for my Huawei MediaPad T3 8.0 (KOB-L09)
Click to expand...
Click to collapse
I think we are long way to go on this dude, lol....can you confirm if you have a dialer and your firmware version please.
If you have a dialer, can you backup (see main post) and would appreciate if you could share OEMINFO please - as far as I know, no information unique to your device are shared like IMEI, etc. thanks
I have a dialler..
buddimanv said:
I think we are long way to go on this dude, lol....can you confirm if you have a dialer and your firmware version please.
If you have a dialer, can you backup (see main post) and would appreciate if you could share OEMINFO please - as far as I know, no information unique to your device are shared like IMEI, etc. thanks
Click to expand...
Click to collapse
I have a dialler and I am currently on Android 7.0 (EMUI 5.1)..Will you say what is OEM info?Do you mean build number....it is KOB-L09C199B003...
Hi,
I can't find answer regarding updating my miui OS to latest available.
I bought the Chinese version(package is written in Chinese) and the seller told me to not update via OTA else my phone will get bricked.
My question is what rom is suitable for the Chinese version?
Attaching my phone info.
Thanks a lot
Attachments
thereupemi said:
Hi,
I can't find answer regarding updating my miui OS to latest available.
I bought the Chinese version(package is written in Chinese) and the seller told me to not update via OTA else my phone will get bricked.
My question is what rom is suitable for the Chinese version?
Attaching my phone info.
Thanks a lot
Attachments
Click to expand...
Click to collapse
Unlock the bootloader, flash twrp and flash any rom you like whether its global stable or chinese.
ecrudragon said:
Unlock the bootloader, flash twrp and flash any rom you like whether its global stable or chinese.
Click to expand...
Click to collapse
I thought I need a specific Rom for the Chinese version
thereupemi said:
I thought I need a specific Rom for the Chinese version
Click to expand...
Click to collapse
Nope, you do not.
Device supports any upgrade from any official version, it happens that some sellers proceeded with a method specifically with the chinese version to flash a called "fake" rom onto it, for this reason it crashes trying to update via OTA. Don´t confuse; it supports any complete upgrade flashing entire rom through MiFlash tool or through recovery but not some OTAs due to bootloader restrictions.
What the user is telling you is if you unlock bootloader and install twrp you can install more easily any rom onto it.
But if you don´t want to root by now you can flash by i.e. this version that it seems to be the latest http://en.miui.com/thread-3007347-1-1.html it should happen that MiFlash tool doesn´t work (I guess only works with unlocked bootloader) then you have to try version for recovery, don´t forget to enable USB debugging and just in case OEM unlock features in developer options. If this doesn´t result then you have to search for MiPhone flash tool to flash in edl mode.
Before go further do a backup an bind atleast an account in your device to Xiaomi servers to have a plan B.
Hello
Before 2 days I received the Chinese version of stratos 3 from banggood instead the the global one I have order.
I have send some messages to the customer support and still waiting for a reply. Unfortunately I know that their policy is to partial refund a small amount of money.
On the other hand I cant use the phone. It has many functions and Chinese is Chinese to me.
Is it possible to flash the global operation systems and how?
Thanks
kstmark said:
Hello
Before 2 days I received the Chinese version of stratos 3 from banggood instead the the global one I have order.
I have send some messages to the customer support and still waiting for a reply. Unfortunately I know that their policy is to partial refund a small amount of money.
On the other hand I cant use the phone. It has many functions and Chinese is Chinese to me.
Is it possible to flash the global operation systems and how?
Thanks
Click to expand...
Click to collapse
Check this:
0. Install adb/fastboot drivers for your PC: https://forum.xda-developers.com/showthread.php?t=2588979 (for Windows)
1. Unlock the bootlaoder: https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
2. Flash stock US firmware for Stratos 3: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
But note that unlocking the bootloader will void your warranty.
Saratoga79 said:
Check this:
0. Install adb/fastboot drivers for your PC: https://forum.xda-developers.com/showthread.php?t=2588979 (for Windows)
1. Unlock the bootlaoder: https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
2. Flash stock US firmware for Stratos 3: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
But note that unlocking the bootloader will void your warranty.
Click to expand...
Click to collapse
thanks for the fast reply.
I'll wait some days so as to get a reply. If i'll flash the us firmware the watch will do any firmware update automatically or I should reflash it anytime there is a new firmware?
Hi,
after question on lenovo forum, here is my installation guide.
Warning:
I dont know what happen if you relock the bootloader after flashing, so dont relock it.
There will be no OTA updates, software update chanel is still retcn.
Every part of this instruction is done at your own risk!
Pro:
5G is now working for me in Germany
Multi-language
Requirements:
Unlocked Bootloader
PC with ADB and Fastboot Tool and Motorola ADB Driver
Download ROM: https://androidfilehost.com/?fid=4279422670115730514
Download flashfile (you can skip this and do it manuelly): https://1fichier.com/?zd9n4g4vj0gf59577w64
Install:
Download ROM and flashfile and extract both in one folder
Unlock Bootloader
Boot phone in Bootloader (power off phone and start with power on + volume down)
run flashfile.bat
Any cons? Any bugs you're experiencing?
Also are you able to pass safety net with magisk? How can you later update the software if ota is not possible?
Much appreciate the description
You can change retcn to reteu
command there: fastboot oem config carrier reteu
After relocking the bootloader the safety net will pass?? Could please send a snapshot of the safety net status after flashing?
XDRdaniel said:
Any cons? Any bugs you're experiencing?
Also are you able to pass safety net with magisk? How can you later update the software if ota is not possible?
Click to expand...
Click to collapse
Have you sold already the X40? If 5G works on X40 , which one do you recommend? Oneplus11 or Motor x40? I have a same concern to loosing the safety net pass, and far as I know, the Edge 40 pro has 1-NanoSIM and 1-eSIM I am afraid to loosing the second SIM...
molni44 said:
Have you sold already the X40? If 5G works on X40 , which one do you recommend? Oneplus11 or Motor x40? I have a same concern to loosing the safety net pass, and far as I know, the Edge 40 pro has 1-NanoSIM and 1-eSIM I am afraid to loosing the second SIM...
Click to expand...
Click to collapse
In my opinion Moto edge 40 pro is far better than op11 which I have now. But unfortunately I only paid 600£ for the global op11 and Moto is 800£, as the don't give any discounts. X40 is on AliExpress tho for 480£ so I might sell my op 11 and buy x40 and install global Rom, if there aren't any issues
XDRdaniel said:
In my opinion Moto edge 40 pro is far better than op11 which I have now. But unfortunately I only paid 600£ for the global op11 and Moto is 800£, as the don't give any discounts. X40 is on AliExpress tho for 480£ so I might sell my op 11 and buy x40 and install global Rom, if there aren't any issues
Click to expand...
Click to collapse
Currently I am using X40. I am little bit afraid to unlock the bootloader but I will do it soon because I need 5G but also need bank apps to be running. I will let you know about the results. Based on another forums feedback with the relocked bootloader will solve safety net issue.. let's try
molni44 said:
Currently I am using X40. I am little bit afraid to unlock the bootloader but I will do it soon because I need 5G but also need bank apps to be running. I will let you know about the results. Based on another forums feedback with the relocked bootloader will solve safety net issue.. let's try
Click to expand...
Click to collapse
If there is the possibility to lock the bootloader after flashing global, I am 100% getting one again and sell my op11
XDRdaniel said:
If there is the possibility to lock the bootloader after flashing global, I am 100% getting one again and sell my op11
Click to expand...
Click to collapse
I am pretty sure it is possible. Here is the thread from another forum: https://4pda.to/forum/index.php?showtopic=1029455&st=420#entry109158631
molni44 said:
Currently I am using X40. I am little bit afraid to unlock the bootloader but I will do it soon because I need 5G but also need bank apps to be running. I will let you know about the results. Based on another forums feedback with the relocked bootloader will solve safety net issue.. let's try
Click to expand...
Click to collapse
I use it in UK and Poland. Bank apps work fine in both countries.
I didn't test 5g. Living in small village. x40 Chinese room.
great was thinking of getting the Moto x40 from AliExpress as it's far much cheaper than the global Edge 40 Pro
Does anyone know the difference between T1TR33.43-20-5 and T1TR33.43-20-15 firmware? A security patch maybe? I have now installed version .43-20-5 on my X40. Rooted with Magisk and safetynet passed. Can I just flash the newer version .43-20-15 via fastboot without losing data? Thank you for the effort.
Screenshots
Few questions after flashing EU FW and with bootloader unlocked:
Is fingerprint scanner working?
Is gps working?
Is wifi working?
OTA Updates are working with unlocked bootloader?
Does something change after bootloader re-lock?
Cheers
fabus said:
Few questions after flashing EU FW and with bootloader unlocked:
Is fingerprint scanner working?
Is gps working?
Is wifi working?
OTA Updates are working with unlocked bootloader?
Does something change after bootloader re-lock?
Cheers
Click to expand...
Click to collapse
Everything is working fine. OTA updates haven't arrived yet so I can't say if it's working.
Anybody try to activate esim? Is it working?
dotzi75 said:
Everything is working fine. OTA updates haven't arrived yet so I can't say if it's working.
Click to expand...
Click to collapse
Actually everything is working except Google wallet.
Even after relocking bootloader it is not working.
Do you know when/how I can enable OEM unlocking? Now it is grayed out (after relocking).
Cheers
dotzi75 said:
Screenshots
Click to expand...
Click to collapse
Great job, well done! Could you please check the banking app and share the picture if it is working fine?
Hey fellas,
I successfully flashed from CN to EU and locked the bootloader after. Safetynet is failed and i want to return to the stock ROM but the OEM unlock is greyed out for me. Do I have to wait till i can activate it again?
Sheldor_95 said:
Hey fellas,
I successfully flashed from CN to EU and locked the bootloader after. Safetynet is failed and i want to return to the stock ROM but the OEM unlock is greyed out for me. Do I have to wait till i can activate it again?
Click to expand...
Click to collapse
you might need to use the moto rescue and smart assistant toll to go back to original firmware
The flashing went well. At first there seemed to be no problems for me. Wifi, GPS, fingerprint etc all are working. But in the night the phone soft reboots every ~30min, which leads to 40-50% battery drop during the night.
Clean install doesn't help.
Waking the device every 15min seems to prevent reboots. First such test consumed 30% of battery during the night but I have to test it a bit more.
I tried flashing back the CN rom (2 releases), but now locksreen pattern/pin/password can't be set (the app freezes and then crashes).
Also the phone is not on the list of rescue software.