Related
hello .... sorry for my bad English
at the beginning i was trying to root my mate 9 pro .. every thing went fine until i tried to install super user, then i don't know what happened but the phone was bricked and i cant boot it normally anymore !! i tried to flash several roms through twrp with no luck at all ...
so i started to look for a solution until i found this guide on youtube , i downloaded a tool that screwed my twrp and i can't access it anymore !!
also my pc won't read my phone even through adb .. i can only go to fastboot mode and recovery mode .. please help me !
i just want to get access to twrp again because now i know how to flash roms properly
Hmmm... pat pat this is so sad... I'm kindda getting the same thing as you do, now my phone can only go to fastboot and recovery mode, but what I did is that I tried to flash a custom ROM, I was using the other ROM made by the same team on my other HUAWEI phone for about two years and everything works really well, so I thought this could also works out but not. Since mate9 pro don't have the SD card method of flashing the system, it's really hard to copy the file into the system to modify.
Did you unlock the bootloader and turn on the usb debugging mode before you brick the phone? I happen to have a script that can flash either twrp or the official recovery into the phone, I think if you did those two steps above, it should be working. Also I'm going to try the usb OTG connecting method and see if I can get the file into the system. Good luck on unbrick the phone! Have faith with it!!
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
I also have exact problem no solution till now!!!
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
This u read?
https://www.getdroidtips.com/stock-rom-realme-u1-firmware/
Please reply
I accidentally hard bricked my realme u1 while I am rooting it.
Any solution please reply.
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
Hey man!
It's not a hardbrick, its soft brick.
If you can access recovery then flash a custom recovery, then flash the original boot.img and recovery.img, then reboot to COS recovery flash your ozip and reboot this should fix it!
Hope this helps!
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
DHANOLA said:
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
Click to expand...
Click to collapse
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
[email protected]#$ said:
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
Click to expand...
Click to collapse
You can contact me by mail: [email protected]
DHANOLA said:
You can contact me by mail: [email protected]
Click to expand...
Click to collapse
Hello Everyone!! It has been two years for me to be in this situation. I get mail from many of those who have a similar problem. So I am here, providing the solution to how I solved this solution.
For the solution, you may, first of all, join the given below Telegram. Link from anybody's phone and ask there for your problem or describe your problem in the group someone will help you out. The group icon has been attached.
Just connect to them on telegram and tell your issue they will surely help..
Telegram link
https://t.me/RealmeU1
Or search for Realme U1 group in telegram
Group icon attached
If then also you need help, please contact me by my mail. As mentioned in the above chat reply,
Update 2021.01.24: I consider the problem mentioned here as solved, since it can be resolved with MTK Bypass explained in the Guides Section. BE CAREFUL however to ONLY choose "Download Only" from the dropdown box in SP Flashtool! DO NOT select anything with "Format" in it, else you will lose S/N, MACs and IMEIs!
--- Original post ---
Hi, I have hard-bricked my new Realme 6 while trying to root it with Magisk. At the moment I am stuck in a bootloop at the power-on logo (realme in white letters). The boot animation (yellow realme letters) does not appear, instead the phone reboots after ~35 seconds. The bootloader says "Orange State".
I can NOT enter fastboot nor recovery mode by any key combination. Holding Power and Vol- makes the string RECOVERY MODE appear for a split second in the lower left part of the screen, however nothing happens afterwards.
I can power down by holding Power and Vol+ an releasing them immediately after the screen goes blank.
Holding Vol- and Vol+ while the phone is off and connecting USB makes a USB serial device appear on a windows machine for about 1-2 seconds before it disappears again.
I am very thankful for any hints on how to unbrick the device.
Here's what I have done in detail to mess up the phone:
1. OTA-Update to the latest OS in my region (EU11.A.48)
2. Unlocked the bootloader with the realme In-depth Test app (everything fine so far)
3. Download stock firmware RMX2001EU_11.A.48 ozip from realmeupdater.com
4. Unzipped with gnu unzip (content was readable, no extra decrytion tool for the ozip needed?) and extracted boot.img
5. Installed Magisk Manager and uploaded boot.img to the phone
6. Patched boot.img with Magisk Manager (and if I remeber correctly DIDN'T UNCHECK Preserve AVB 2.0/dm-verity)
7. Certainly FORGOT to do anything with vbmeta.img
8. Did NOT erase cache and userdata
9. Flashed patched boot.img directly and WITHOUT --disable-verity or --disable-verification
10. Rebooted the phone.
Am I correct that my problem is the AVB/dm-verity part?
Why does the modified boot.img affect the recovery (I thought they were seperate)
Can I try something with SP Flashtool?
I do have a second intact device that I didn't dare to touch yet, if that helps resolving the issue (e.g. for SP Flashtool readbacks).
As said any advice is highly welcome. Please ask I you need any more information to help.
I did that too... Magisk patched boot .img process of rooting is the risky process , I bricked my device, got it into red state.. tried thick and thin to revive using various flash tools, unable to do it, finally went to a shop , got it fixed, go-to a good repair shop, if you go to the service center, they will say replace motherboard for 5 k , I hope it helps, do traditional unlock bootloader TWRP recovery then flashing Magisk zip method for rooting process.
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
cmfan said:
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
Click to expand...
Click to collapse
Yes, you are right , red state means that, I guess bcoz, I may have formatted it and ran again unlocked bootloader but it showed unlocking failed, but I thought that I had previously unlocked it so it should be unlocked but I forgot to do that app thing process of deep test again, and I was on Android 10 latest and patched boot img of previous version using magisk, now I understand what mistake I made, I should have used boot IMG of current version of a 10 , but still I am afraid of doing this magisk method of rooting by patching boot IMG bcoz repair cost me 800/- , and I found out on YT that the latest version of a 10 of my device doesn't readily allows twrp and flashing zip of magisk.... Plus there are half baked info on important things, this is new device for me, I have had rooted Samsung and Lenovo, but rooting this is kind of tricky, bcoz it's still new, I think.... Want to try .... But I m afraid.... Tried fastboot method of TWRP flashing but can't replace stock room, so I guess I can't root .....
Well, there is a tutorial on how to root here on XDA, and seems to be confirmed working. I just didn't know about the vbmeta part from earlier Android versions. Haven't you tried that?
cmfan said:
Well, there is a tutorial on how to root here on XDA, and seems to be confirmed working. I just didn't know about the vbmeta part from earlier Android versions. Haven't you tried that?
Click to expand...
Click to collapse
Thnx man, I have rmx 1825 , but the process would be same for my device, I would have to search for it...
cmfan said:
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
Click to expand...
Click to collapse
Hello, please check my reply to your reply on my thread. BROM mode is as known as "Emergency Mode" and should not be inaccessible. I will once again request you to try different key combinations and also if it's detecting as fastboot, ADB or Fastboot commands should be available. Please try typing adb reboot or fastboot reboot with minimal ADB and fastboot tools and let me know. If you want to personally message me, message my telegram. I will try helping you there.
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
daeSundae said:
Hello, please check my reply to your reply on my thread. BROM mode is as known as "Emergency Mode" and should not be inaccessible. I will once again request you to try different key combinations and also if it's detecting as fastboot, ADB or Fastboot commands should be available. Please try typing adb reboot or fastboot reboot with minimal ADB and fastboot tools and let me know. If you want to personally message me, message my telegram. I will try helping you there.
Click to expand...
Click to collapse
I think there is no Emergency Download Mode in Realme devices.. pls guide ...
Ank Sak said:
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
Click to expand...
Click to collapse
Hello. Please follow this guide.
Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial
In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset. from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool. with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa)...
forum.xda-developers.com
daeSundae said:
Hello. Please follow this guide.
Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial
In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset. from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool. with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa)...
forum.xda-developers.com
Click to expand...
Click to collapse
Thnx that's a life saver, I am afraid to go forward with the device, this is promising, I will try, I found out that the new version c17 os Android 10 I am unable to root by twrp magisk zip flashing method, twrp isn't installing, there's an .ofp extracter, but it gives virus with software, unable to do, even talked on WhatsApp and gave him Gmail id, will try this method , I wanted the SP flash tool method, it's simple and can readily restore the stock rom... Thnx Sundae.. daesundae ... What kind of name is that...?? .. chuckles...
Ank Sak said:
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
Click to expand...
Click to collapse
This thread is about a Realme 6 (RMX2001 in my case). I've edited the very first post to immediately show the solution. Please check there or follow daeSundae's guide if you have a different device.
cmfan said:
This thread is about a Realme 6 (RMX2001 in my case). I've edited the very first post to immediately show the solution. Please check there or follow daeSundae's guide if you have a different device.
Click to expand...
Click to collapse
I saw everything that You posted, incidentally the YouTube video on this is on rmx1825 , thnx, whatever you posted it helped..
Hi guys, I did something very stupid, flashed the wrong boot.img and ended up completely bricking my device. I tried changing the active partition to see if it would boot, that didn't help.
I was on the latest august update of official android 11 . Then I found a boot.img I found online, but apparently it wasn't from the exact same rom. The phone booted but no WIFI.
It wouldn't allow me to flash any update through settings - system update hence I decided to try to use a fastboot rom....tried that, but the process when I hit flash_all.bat gives a lot of FAILED (remote: Flashing is not allowed for critical particions) or FAILED (Error reading sparse file)....what am I doing wrong?
I can't do anything except get in fastboot.
Is there any way I can get the phone to work agan? Needless to say that as the idiot I am the whole phone is wiped so this doesn't matter anymore. As long as I can get it to work.
Please advise and thanks (The phone is OP7T Pro ME european).
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
leginhee said:
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
Click to expand...
Click to collapse
Thanks the problem is i can't get it to start qualcomm edl. I power off, press both vol buttons and conmect to usb but nothing happens. What am i doing wrong?
Qualcomm edl Mode is just a blackscreen
"I can't do anything except get in fastboot."
Your Bootloader was unlocked ?
You can try fastboot reboot edl.
Or you can find a ROM that works, extract all images and flash all of them.
I have a similar problem.. kind of. I just flashed a rooted boot to my phone but there is no wifi at all, and since i dont have a SIM card im not getting any updates. the Boot.img came from the oneplus software update and i did the payload dumper. Since I have rooted it ive lost the wifi capabilites. (its the 7T pro me international.)
Hello, after a week waiting for unlocking the phone, i tried to install twrp unnoficial following a guide on the web... now the phone is totally bricked., it dosnt go into recovery mode only fastboot and after 10 seconds it restarts, i have adb installed properly on the pc, it detects my old poco f1 but the x3 gt isnt recognized and reboots after 10 seconds...
have anyone experienced this, or know of a possible solution? i really need help
ohh adding more info... maybe i messed up the boot partition, cause extracting the rom and looking at the flash_all.bat it says boot_ab and i did to boot... after this it entered the loop, it was recognizing the phone but i tried installing the room via miflash, gave error everytime i tried and now it isnt being recognized plus after 10 sec in fastboots it restarts... there is no charging battery creen just the loop
Just get a new device now
lol i dont want tooo... was thinking bout that
well... slowly, step by step using SP flash tool i am now able to see the poco logo and charging batery again... algo into fastboot i can get... gonna keep this updated in case anybody has this issue
btw.. there are 3 files i cannot flash, it gives error...
dpm_a.img
cust.img
rescue.img
rescue.img says mismatch, but i extradted the files from the downloaded poco rom, dows anybody know thy this happen?
well almost fixed... i managed to flash the room a while ago... now it can go into recovery mode, but says NV corrupted, any idea?
it can only boot into fastboot and recovery... i supose as it has something corrupted it wont boot into the system
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
Ocelado said:
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
Click to expand...
Click to collapse
eres español?
Ocelado said:
eres español?
Click to expand...
Click to collapse
Ocelado said:
yeah i speak spanish... well i will try, i flashed using sp flash tool, maybe its different using miflash?
Click to expand...
Click to collapse
i wanted to root my x3 gt but the unnoficial twrp around is what bricked my phone ahahaha
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Ocelado said:
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Click to expand...
Click to collapse
how did you installed, fastboot? what partition name did u use? i followed a guide that said recovery but x3 gt uses rescue i believe... this is wht bricked me
ohh btw i installed an enginering rom and now i was able to get into the phone... sadly on info, i have no mac address no imei... do someone know how to fix this?
Ocelado said:
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Click to expand...
Click to collapse
i flashed it to boot like the site says, but there is no recovery now... i can get into the system but no twrp recovery holding vol up and power
Rynhe said:
ohh btw i installed an enginering rom and now i was able to get into the phone... sadly on info, i have no mac address no imei... do someone know how to fix this?
Click to expand...
Click to collapse
you must turn on wifi to see mac address
Gaderg1992 said:
you must turn on wifi to see mac address
Click to expand...
Click to collapse
nope it wont let me.. i turn it on and does nothing...
I installed twrp on boot partition, and if you can't enter twrp reflash it.
Ocelado said:
I installed twrp on boot partition, and if you can't enter twrp reflash it.
Click to expand...
Click to collapse
man you are right.. idunno what hapened.. suddenly it jst booted in twrp
gl i hope i can help you. If you need more help just write here
Ocelado said:
gl i hope i can help you. If you need more help just write here
Click to expand...
Click to collapse
thanks... do you know of any custom rom for x3 gt? i cant use miui cause it says cant connect to google server at forst boot config
iv tried many gsi but none of these bots up after flashing to system
No... I don't know any rom...
2 things: have you installed the global rom? Try the global. Else, try skipping the logging in and then try it by entering gmail or in settings