Related
Hi there i recently upgraded to CM10.2 experimental and all worked fine. After playing around a bit i decided to go back to my CM10.1 rom and that went off without a hitch but my phone sat in the boot for over an hour so i decided to go into recovery and wipe my data when i was faced with (unable to mount /sdcard. I then checked in my log and this is what i found
Install from sdcard complete
minzip: Extracted file "/system/xbin/strace"
minzip: Extracted file "/system/xbin/su"
about to run program [/tmp/install/bin/persist.sh] with 2 args
cat: can't open '/temp/save/prop': no such file or directory
sed: -i requires an argument
script result was [/system]
Install from sdcard complete.
I:Can't partition non-vfat: datamedia
I:can't partition non-vfat: ext4
I:Can't format unknown volume: /emmc
W: failed to mount /dev/block/mmcblk0p12 (invalid argument)
I was going to install stock rom and recovery using odin but a friend said that it would make it worse. Any help will be appreciated... Thanks in advance
P.S i have been rooting for about 6 years and have had 4 phones and this has never happened
-Athlon
the problem is about the partition?
Probably the best flash samsung official rom via Odin, for your country
misacek said:
the problem is about the partition?
Probably the best flash samsung official rom via Odin, for your country
Click to expand...
Click to collapse
thank you for the reply i was worried it would mess up even more. I will be flashing tonight (my time) to see if it works and will let you know.:good:
-Athlon
Read everything here on xda about everything / basics /
Important backup / EFS folder /
misacek said:
Read everything here on xda about everything / basics /
Important backup / EFS folder /
Click to expand...
Click to collapse
Yeah after i screwed up my phone a while back because of EFS i never do anything without reading up about it:silly::good:
Thanks for the help:angel:
I do not know what is the problem exactly?
I did all the installation / ICS, JB / so as download, it should go fix it?
misacek said:
I do not know what is the problem exactly?
I did all the installation / ICS, JB / so as download, it should go fix it?
Click to expand...
Click to collapse
Could you explain a bit further by what you mean?
I also had a big problem? Initially flash JB / help me / then flash / ICS older fw / phone and ran and offered the update via OTA
misacek said:
I also had a big problem? Initially flash JB / help me / then flash / ICS older fw / phone and ran and offered the update via OTA
Click to expand...
Click to collapse
Ok i dont quite get what the issue is though?
Fixed
Hi all
I fixed my phone using Galaxy S3 i9300 Unbrick [restore to stock rom] [noobs][easy] but probably the most important part is just below step 8 :good:
Thanks.
P.S: how do i close this
Closed on OP request.
P.s. To bring anything to a moderator's attention, use the yellow triangle button (commonly referred to as the report button) and report the relevant post
Hi all
I think I bricked my gf's phone. I tried to update software and now when I turn the phone on I see only LG logo and in upper right corner this:
error: boot certification verify
secure booting error!
couse: boot certification verify
And then the phone shuts itself off...
What can I do now? Tried to ender download mode and I can't....
Ok I managed to get a black screen with "Firmware Update. Do not unplug the USB connection until the process is complete" but nothing happens and is stuck at 0%
What should I do now?
DenverPL said:
Ok I managed to get a black screen with "Firmware Update. Do not unplug the USB connection until the process is complete" but nothing happens and is stuck at 0%
What should I do now?
Click to expand...
Click to collapse
Flash a firmware?
Or you mean you can't do that?
Sent from my LG G2 Mini using XDA Labs
HTML:
Vagelis1608 said:
Flash a firmware?
Or you mean you can't do that?
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
I'm trying to do that right now with LG Mobile Support Tool...
Ok I have fixed this issue but I get now "UIDs on your system are inconsistent" so I decided to install another ROM
1. Made root
2. Unlocked bootloader (but don't know how to check if it's really unlocked...)
3. Installed Twrp 3.0.0.0
And now when I try to install ResurrectionRemix-M-v5.6.6-20160407-g2m.zip in revovery I get:
Updater process ended with ERROR: 7
Error installing zip form /sdcard/
ResurrectionRemix-M-v........
Updating partition detial...
Error openin: data/data/com.android.browser/app_icons (I/0 error)
Error opening data/data/com.android.gallery3d/cache (not a direcotry(
and so on...
what should I do now?
Now I managed to install this ROM but after every reboot I get a message "Theres an internal problem with your device, and it may be unstable until you factory data reset" but after factory resetting there's still this error...
Every time I try to do something in TWRP I get the same errors with "app_icons"...
DenverPL said:
Now I managed to install this ROM but after every reboot I get a message "Theres an internal problem with your device, and it may be unstable until you factory data reset" but after factory resetting there's still this error...
Every time I try to do something in TWRP I get the same errors with "app_icons"...
Click to expand...
Click to collapse
Format /system /cache and /data in recovery and install a ROM of your choosing.
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
Format /system /cache and /data in recovery and install a ROM of your choosing.
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
This is what happens when I try to do anything with TRWP including cache/system or data wipe...
DenverPL said:
This is what happens when I try to do anything with TRWP including cache/system or data wipe...
Click to expand...
Click to collapse
After the wipes, go to the Advanced tab (bottom left) and press the "Copy log to SD".
A file will be created either in the internal memory or the external SD (I am not sure where).
Upload it here for me to have a look.
(You can pull it with adb if you want)
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
After the wipes, go to the Advanced tab (bottom left) and press the "Copy log to SD".
A file will be created either in the internal memory or the external SD (I am not sure where).
Upload it here for me to have a look.
(You can pull it with adb if you want)
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
The log is attached
DenverPL said:
The log is attached
Click to expand...
Click to collapse
All I see in the log is "I:Real Error: Unable to stat: ..."
It gives that for a few directories / files.
I am not sure why it says that.
Copy everything in your internal SD (in the recovery you can find it under /emmc ) to a folder in your external SD ( /sdcard ) if you don't want to lose them. Then in recovery in the Wipe > Advanced Wipe choose /data and press "Repair or change filesystem", then press Repair filesystem. If that doesn't work, press Change filesystem and choose ext4.
Sent from my LG G2 Mini using XDA Labs
You could also try to re-flash TWRP.
Vagelis1608 said:
All I see in the log is "I:Real Error: Unable to stat: ..."
It gives that for a few directories / files.
I am not sure why it says that.
Copy everything in your internal SD (in the recovery you can find it under /emmc ) to a folder in your external SD ( /sdcard ) if you don't want to lose them. Then in recovery in the Wipe > Advanced Wipe choose /data and press "Repair or change filesystem", then press Repair filesystem. If that doesn't work, press Change filesystem and choose ext4.
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
Thank you for your help.
http://forum.xda-developers.com/showthread.php?t=2585160
That solution worked for me
Hi all. I keep getting this error after rooting, installing SuperSu and TWRP. When I try to flash a ROM (any ROM), I get stuck. I've tried the latest Resurrection and CM ROMS. Will someone please help me past this last hurdle? Thank you!
I can't upload or link the screenshot but here's the info:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Which I have done several times.
Backup ==> select all ==> Swipe to Backup
Wipe ==> Advenced Wipe ==> /System + /Data + /Cache Confirm "Swipe to Wipe" . Try installing again ROM
maxprzemo said:
Backup ==> select all ==> Swipe to Backup
Wipe ==> Advenced Wipe ==> /System + /Data + /Cache Confirm "Swipe to Wipe" . Try installing again ROM
Click to expand...
Click to collapse
That did the trick! I put Resurrection OS on there and all is well except for finding a stable GAPPS build.
Not working for me, my device is KII-L21 on stock rom and I'm trying to install official CM13, my device is rooted and have twrp
If your device is wiped It isnt rooted.. Wipe it dont forget Cache partitions try again.
maxprzemo said:
Backup ==> select all ==> Swipe to Backup
Wipe ==> Advenced Wipe ==> /System + /Data + /Cache Confirm "Swipe to Wipe" . Try installing again ROM
Click to expand...
Click to collapse
Bro, me sirvió. Muchas gracias
It really works, thanks dude
I think it all boils down to doing a format /system.
Next time I will try that!
Edit: I was wrong, the format /data is needed.
If I don't to the reset I am one of those that always gets error 7.
unmount ->system, data, cache :good:
As I already posted at https://forum.xda-developers.com/showpost.php?p=70851854&postcount=534,
I am able to avoid the Error 7 (inconsistend data) by switching to gapps mini before installing the update.
Since the experiental build, I do the following within one TWRP session: install latest gapps mini, install the upgrade to latest lineage-nightly and reinstall latest gapps stock.
So far it works for me.
Do a clean install wiping system, data, cache and dalvik cache before flashing a new ROM is adviced, it will avoid most of problems. For the GApps, I recommend OpenGapps Pico version to install the minimal needed, then you can install the other Google apps you need from the Play Store.
Guys I need some help here. I'm running into the same TWRP error 7 situation. The phone is unlocked, and I've installed kiwi_twrp_3-21_recovery. The model of the device is Honor X5 (KIW-CL00)
I've tried flashing both ResurrectionRemix-M-v5.7.4-20161220-kiwi & lineage-14.1-20170419-nightly-kiwi-signed ROM, whether it's flashing from the phone's storage or from the SD card, both ROM are giving me the same error code.
I tried formatting the system, advance wipe function (Dalvik & Cache & Data & System), now I don't even have the default factory ROM on my phone, but I'm still getting the error 7 code.
Please help. Thanks in advance.
U need to edit updater script to remove assert for device check
Error7 and then "could not find meta inf..."
Huawei KIWI Honor 5x
KIW-L21 EMUI 3.1
I installed
TWRP3.0.2-0 lineage-14.1-20170607-nightly-kiwi-signed.zip ->Error 7
then
cm-13.0-20160904-NIGHTLY-kiwi.zip and cyanogen recovery the same -> Error 7
Error 7 and if I try to delete assert, the next message is "could not find meta inf/com/google/android/update-binary"
My last problem
If I unzip and zip without change anything the Install message is "could not find..." I try it whit Linux 16.4 Win10 Win7 and 7Zip. all the same.
I can not change the updater-script without unpacking the File
Can anybody Help
robert_web said:
Huawei KIWI Honor 5x
KIW-L21 EMUI 3.1
I installed
TWRP3.0.2-0 lineage-14.1-20170607-nightly-kiwi-signed.zip ->Error 7
then
cm-13.0-20160904-NIGHTLY-kiwi.zip and cyanogen recovery the same -> Error 7
Error 7 and if I try to delete assert, the next message is "could not find meta inf/com/google/android/update-binary"
My last problem
If I unzip and zip without change anything the Install message is "could not find..." I try it whit Linux 16.4 Win10 Win7 and 7Zip. all the same.
I can not change the updater-script without unpacking the File
Can anybody Help
Click to expand...
Click to collapse
Did you try this?
Backup ==> select all ==> Swipe to Backup
Wipe ==> Advenced Wipe ==> /System + /Data + /Cache Confirm "Swipe to Wipe" . Try installing again ROM
robert_web said:
Huawei KIWI Honor 5x
KIW-L21 EMUI 3.1
I installed
TWRP3.0.2-0 lineage-14.1-20170607-nightly-kiwi-signed.zip ->Error 7
then
cm-13.0-20160904-NIGHTLY-kiwi.zip and cyanogen recovery the same -> Error 7
Error 7 and if I try to delete assert, the next message is "could not find meta inf/com/google/android/update-binary"
My last problem
If I unzip and zip without change anything the Install message is "could not find..." I try it whit Linux 16.4 Win10 Win7 and 7Zip. all the same.
I can not change the updater-script without unpacking the File
Can anybody Help
Click to expand...
Click to collapse
Pleasw upgrade to TWRP 3.1.1
Sent from my Honor 8 using XDA Labs
robert_web said:
Huawei KIWI Honor 5x
KIW-L21 EMUI 3.1
I installed
TWRP3.0.2-0 lineage-14.1-20170607-nightly-kiwi-signed.zip ->Error 7
then
cm-13.0-20160904-NIGHTLY-kiwi.zip and cyanogen recovery the same -> Error 7
Error 7 and if I try to delete assert, the next message is "could not find meta inf/com/google/android/update-binary"
My last problem
If I unzip and zip without change anything the Install message is "could not find..." I try it whit Linux 16.4 Win10 Win7 and 7Zip. all the same.
I can not change the updater-script without unpacking the File
Can anybody Help
Click to expand...
Click to collapse
U need to edit and repack everything . And do remember that if u mess a single letter it will give an error
Thanks
Sure I wipe advanced by every attempt.
Twrp 3.1.1 the same problem.
But you have right, the Solution for me is not to unzip and zip the file for delete the "assert". Only the way to edit without unpack the File in the Ubuntu "ARCHIVMANAGER" works.
Now it is installed but now I am in a bootloop But this is an other Problem. One step after another.
robert_web said:
Thanks
Sure I wipe advanced by every attempt.
Twrp 3.1.1 the same problem.
But you have right, the Solution for me is not to unzip and zip the file for delete the "assert". Only the way to edit without unpack the File in the Ubuntu "ARCHIVMANAGER" works.
Now it is installed but now I am in a bootloop But this is an other Problem. One step after another.
Click to expand...
Click to collapse
try again by making a clean flash
robert_web said:
Thanks
Sure I wipe advanced by every attempt.
Twrp 3.1.1 the same problem.
But you have right, the Solution for me is not to unzip and zip the file for delete the "assert". Only the way to edit without unpack the File in the Ubuntu "ARCHIVMANAGER" works.
Now it is installed but now I am in a bootloop But this is an other Problem. One step after another.
Click to expand...
Click to collapse
So , plz upload the updater-script here . I will edit and forward u . Later repack everything as is, lets see if that works . If not , i will build a rom for u especially
Thanks its work fine now. It was my fault, I updated from Lollipop not from Nougat. So I used Huawei Firmbootextraktor extract system.img cust.img recovery.img and boot.img and on my SD I copy ../dload/update.app version B140 Android 5.1.1. Then the Handy started I updated EMUI 4.0 and Android 6.1. Now works my Handy with all zip files where I delete the asserts.
Maybe was the problem, in the assert is wrote "kiwi" and my Handy is a "KIW-L21"
I try update via recovery ( put this file to external strorage only )
1. boot to recovery mode hold Power + Volume Down button
2. Using the Volume buttons to scroll and the Power button to select, choose "Enter
recovery mode
3. Choose apply update from external storage
4. select "reboot system now after finished update
http://fota.asus.com/delta_package/.../WW_PF500KL-12.2.2.43-13.6.5.30-fota-user.zip
This screenshoot from my phone +Station
Error Status 7
I have error:
System partition has unexpected contents
E:Error in /sdcard/UL-ASUS_TOON-WW-13.6.5.30-user.zip
(Status 7)
anyone can help me?!
Same issue as well
Getting the same "System partition has unexpected contents (Status 7 )" any idea whats wrong?
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Gizoid1337 said:
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Click to expand...
Click to collapse
Thanks ! It worked for me
I reinstalled ver 12.2.2.43 which really is my current version, and then proceed to install MM 13.6.5.30 with success
Gizoid1337 said:
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Click to expand...
Click to collapse
Thanks to you I have updated my phone to marshmallow using twrp 3.0.0, which allowed me to re-unlock bootloader, and root my phone.
It can be done, you just need to remove a few lines in the updater-script file.
something with ro.fingerprint (that identifies the recovery, it was originally expecting stock).
Replace it inside the zip. Then transfer update to sd card or internal.
After that wipe system, then reflash .43, right after that flash the mm update.
Will take some time but it should work once everything is verified.
reflash bl unlock and twrp (just a precaution) , then you can leave.
It would say no os but ignore it.
First boot takes around 10-15 mins then presto you finally have it.
Haven't encountered any bugs yet and it freed up a lot of storage space. Makes me wonder why I had to wait for the update to come to me, so glad I'm done with that.
So that concludes the last major update for the padfone s.....
Can u help me pls? I've tried unroot ,wipe system data and reflash .43 which is my current rom but still got signature verification error. any suggestion to fix this? Thx
Justatechie said:
Thanks to you I have updated my phone to marshmallow using twrp 3.0.0, which allowed me to re-unlock bootloader, and root my phone.
It can be done, you just need to remove a few lines in the updater-script file.
something with ro.fingerprint (that identifies the recovery, it was originally expecting stock).
Replace it inside the zip. Then transfer update to sd card or internal.
.
Click to expand...
Click to collapse
which lines exactly ? cause i tried removing mine and im now getting an error in the zip
error 6 or something
dtgo said:
which lines exactly ? cause i tried removing mine and im now getting an error in the zip
error 6 or something
Click to expand...
Click to collapse
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
NightbladeSinX said:
Can u help me pls? I've tried unroot ,wipe system data and reflash .43 which is my current rom but still got signature verification error. any suggestion to fix this? Thx
Click to expand...
Click to collapse
Thats odd.
You should probably Re-download or transfer the ww file again. Could just be a bad transfer of data.
Make sure you have twrp 3.0.0 and that system protection off. (it pops up on the first screen, but you can find it under twrp settings)
Justatechie said:
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
Click to expand...
Click to collapse
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
dtgo said:
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
Click to expand...
Click to collapse
If it doesn't say anything about identifying the device model or checking system, then something is wrong.
Might be a bad edit or it might have gotten corrupted while transferring back into the zip.
I stick with N++ for the edits, sometimes windows file transfer can be a pain by itself while trying to replace the update script, 7zip might help.
dtgo said:
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
Click to expand...
Click to collapse
got it working thanks again man you've been a big help
Justatechie said:
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
Thats odd.
You should probably Re-download or transfer the ww file again. Could just be a bad transfer of data.
Make sure you have twrp 3.0.0 and that system protection off. (it pops up on the first screen, but you can find it under twrp settings)
Click to expand...
Click to collapse
Thx for reply. i manage to get updated to 6.0.1 but now i lost root. i did mistake not flashing twrp before 1st boot n it replace twrp to stock rec. Is there any root method available yet? I've tried latest kingroot but it was unsuccessful. Any way is there any difference between WW and TW firmware version?
NightbladeSinX said:
Thx for reply. i manage to get updated to 6.0.1 but now i lost root. i did mistake not flashing twrp before 1st boot n it replace twrp to stock rec. Is there any root method available yet? I've tried latest kingroot but it was unsuccessful. Any way is there any difference between WW and TW firmware version?
Click to expand...
Click to collapse
You could probably flash recovery through fastboot, only if your bootloader is unlocked. If not it wont allow the flash. it would say FAILED cant flash unsigned image, but theres a chance that it might have been flashed, just check to see if changes have applied.
Assuming that you have went to the fastboot portion of your phone you can check its status.
if its not unlocked, then you have to find another way to root to flash your twrp recovery back on your phone.
Did this, but kept getting errors due to (probably) my use of xposed. Managed to soft brick my phone, and recovered it using http://forum.xda-developers.com/padfone-x/help/guide-restoring-stock-rom-recovery-t3179818
After that, had to edit updater-script to remove all checks.
What tripped me up was just how long the update reboot took. Almost half an hour. I was going to give up but decided to leave it while taking a short nap.
heres the updater script for anyone having issues
Please can someone help me?
I'm trying so hard to get this to work but I'm barely getting anywhere. What I've done (thanks to ninekaw9's guide):
- unlock bootloader
- wiped everything (yet there is still stuff in the file explorer, like the su install folder)
- using fastboot boot recovery:
-- use TWRP 2.8.7.0 to transfer files from sdcard to emmc
-- with TWRP 2.7.1.1:
--- installed WW 99.99.99.0 for KK (works)
--- installed WW 12.2.2.27 for LP & stock recovery (works)
--- installed WW 12.2.2.43 for latest LP (works)
- removed every abort line from updater script to get it to stop complaining about fingerprint/unexpected system contents
- installed modified FOTA WW 13.6.5.30 for MM (no OS change)
So after all that, I'm where I started but with no apps.
Before I found out 2.8.7.0 couldn't flash stock ROMs I flashed 12.2.2.43 after a full wipe and ended up with no System UI...
Outcomes from using different recovery to flash MM update:
2.7.1.1 with unmodified: apparently my phone is TW not WW (incorrect)
2.8.7.0 with unmodified: some weird fingerprint with omni-T00N and 5.1.1, even after wipe and stock 12.2.2.43 flash. Couldn't edit or replace the default.prop file, it would just get overwritten each time
stock with unmodified: couldn't even mount my SD card, so tried ADB sideload, got the unexpected system contents message
stock with modified (no sha1): would no longer allow me to ADB sideload (0.00x message)
TWRP (either) with modified (no prop): unexpected system contents
TWRP (either) with modified (no prop/sha1): seems to work, but upon boot to system, nothing appears to have changed.
I desperately want MM so I have a smaller system partition, then I can stop pushing updates to system to save space, and therefore won't need root so I can play Pokemon GO and use Sky Q.
That or I'm going to try Magisk... Has anyone used this on a Padfone?
If anyone can guide me through which files/folders I can delete from my phone to save space, that would be great. I know most folders are mounting points, but there's a lot of .sh files and other folders that I'm not familiar with.
I've asked in another thread where I can get TWRP 3.x for Padfone S, but nobody has replied!
Please can someone help me?
Nintynuts said:
I'm trying so hard to get this to work but I'm barely getting anywhere. What I've done (thanks to ninekaw9's guide):
- unlock bootloader
- wiped everything (yet there is still stuff in the file explorer, like the su install folder)
- using fastboot boot recovery:
- use TWRP 2.8.7.0 to transfer files from sdcard to emmc
- with TWRP 2.7.1.1:
- installed WW 99.99.99.0 for KK (works)
- installed WW 12.2.2.27 for LP & stock recovery (works)
- installed WW 12.2.2.43 for latest LP (works)
- removed every abort line from updater script to get it to stop complaining about fingerprint/unexpected system contents
- installed modified FOTA WW 13.6.5.30 for MM (no OS change)
So after all that, I'm where I started but with no apps.
Before I found out 2.8.7.0 couldn't flash stock ROMs I flashed 12.2.2.43 after a full wipe and ended up with no SystemUI...
Outcomes from using different recovery to flash MM update:
2.7.1.1 with unmodified: apparently my phone is TW not WW (incorrect)
2.8.7.0 with unmodified: some weird fingerprint with omni-T00N and 5.1.1, even after wipe and stock 12.2.2.43 flash. Couldn't edit or replace the default.prop file, it would just get overwritten each time
stock with unmodified: couldn't even mount my SD card, so tried ADB sideload, got the unexpected system contents messagestock with modified (no sha1): would no longer allow me to ADB sideload (0.00x message)
TWRP (either) with modified (no prop): unexpected system contents
TWRP (either) with modified (no prop/sha1): seems to work, but upon boot to system, nothing appears to have changed.
I desperately want MM so I have a smaller system partition, then I can stop pushing updates to system to save space, and therefore won't need root so I can play Pokemon GO and use Sky Q.
That or I'm going to try hiding root Magisk...
If anyone can guide me through which files/folders I can delete from my phone to save space, that would be great. I know most folders are mounting points, but there's a lot of .sh files and other folders that I'm not familiar with.
I've asked in another thread where I can get TWRP 3.x for Padfone S, but nobody has replied!
Please can someone help me?
Click to expand...
Click to collapse
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
xantanion said:
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
Click to expand...
Click to collapse
Thanks. No wonder I couldn't find it as it doesn't mention 3.0.0.0 or 3.x or any version number at all.
I have answered my own Q&A thread with a link so hopefully others can find it. Will try it now.
xantanion said:
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
Click to expand...
Click to collapse
Thankfully it has worked many thanks. Unfortunately while Sky Q no longer complains about root, it does complain about my Padfone station being an external display, so still won't play videos
As the title says, i want the figure out which firmware version is installed on my phone. OnePlus 9 Pro.
I am currently in a bootloop and try to reflash the boot.img to minimize the data loss. tried a few versions without success. (thread calling for help for that is here).
To break down the problem i want to flash the correct boot img, but need to know which one.
I can boot twrp temporarily with fastboot and access some data. I couldnt find build.props file as suggested.
Is there any other possibility to find the firmware version?
thanks in advance!
Speaka said:
(...) I couldnt find build.props file as suggested.
Is there any other possibility to find the firmware version?
(...)
Click to expand...
Click to collapse
In TWRP, you need to mount the system to see the content.
What do you mean with mount? Menu entry "mount" in twrp means mounting it to the usb connection, as far as i know....
In twrp menu advanced->file manager i can see the root directory and /system (and more).
Where do i have to look?
TWRP -> Mount -> (mark the square) System
Only then will File Manager see the contents of the system partition.
Ah okay. This was a misconception. it is mounted. unter /system is se bin,etc,lib64 and usr. Browsing araound i did not find build.props.