Hi,
anyone has battery & back plastic case for Siemens SX66 model?
thanks.
yes i do, quite a few other parts too, camera speaker screen etc
scousemartin
Would you have a d-pad as it seems that they get worn on the inside.
Taking it apart and removing the dust has not helped.
However if I look at the back ruber part of the d-pad I notice that it has a raised button were each of the contacts are. My down one is now close to being flat. A dab of glue did not stick to the ruber as it fell of when I was putting it back together again.
To make it worse for me is the fact I was given a replacement BA as it was no longer needed and that too has the same problem (which would esplain why I got it for free in the first place.
I recently picked one up used because I needed something smaller and more durable than my GS3.
But I've noticed that my battery cover doesn't seem to clip on correctly.
When I hold it a certain way, the clips snap back in, but then pop right out. I also noticed that the corner
where the cell phone strap is creeks.
Is there a special way to put it on that I am not aware of or did I just buy a phone with a faulty back cover?
Thanks!
Hey guys,
I got an official S-view cover from ATT store (Black) for my new note 3. I love it except for one major problem. When I fold the cover open around the back and set it down on something like a desk or table. Eventually the phone will sit completely flat against the cover and I am noticing that the cover will engage S-view mode on the phone while it it folded around the back of the phone. This is super annoying, because when its in S-View mode the phone is essentially locked and I can't do anything with it unless I un-fold the cover from around the back. I thought maybe I had a bad cover with super strong magnets or something so I returned it to ATT and bought another one from T-Mobile (This was the advice I got from Samsung support). I having the exact same problem with this one. Now I think its my phone. I can replicate this problem anytime by simply putting pressure on phone the and cover while it is folded around the back. When I hold the phone in my hand with the cover around the back it is not as prevalent because phone usually is not sitting completely flat to the cover (because the cover is still new). Once it breaks in and gets flimsy this will happen all the time completely limiting phone functional while the cover is around the back. I had the an S-View cover on a S4 and it never had this problem. Can any of you guys replicate this issue or do I have a bad phone. Please help, I need to know if I need to exchange my phone. Thanks in advance.
davparks said:
Hey guys,
I got an official S-view cover from ATT store (Black) for my new note 3. I love it except for one major problem. When I fold the cover open around the back and set it down on something like a desk or table. Eventually the phone will sit completely flat against the cover and I am noticing that the cover will engage S-view mode on the phone while it it folded around the back of the phone. This is super annoying, because when its in S-View mode the phone is essentially locked and I can't do anything with it unless I un-fold the cover from around the back. I thought maybe I had a bad cover with super strong magnets or something so I returned it to ATT and bought another one from T-Mobile (This was the advice I got from Samsung support). I having the exact same problem with this one. Now I think its my phone. I can replicate this problem anytime by simply putting pressure on phone the and cover while it is folded around the back. When I hold the phone in my hand with the cover around the back it is not as prevalent because phone usually is not sitting completely flat to the cover (because the cover is still new). Once it breaks in and gets flimsy this will happen all the time completely limiting phone functional while the cover is around the back. I had the an S-View cover on a S4 and it never had this problem. Can any of you guys replicate this issue or do I have a bad phone. Please help, I need to know if I need to exchange my phone. Thanks in advance.
Click to expand...
Click to collapse
I've got the same problem here. It seems to be an issue of either the little magnet on the bottom of the cover being too strong or the sensor on the phone being too sensitive. Definitely annoying and poorly designed. I don't know of any solution. I just wedge my finger behind the cover to prevent it from tripping, but that's hardly a solution.
Can't help you with this issue.. but I got bought two knock-offs on the web and never experience anything like that. Probably the way it's built with the OEM case.
I have the same problem with my sview case for note 3.
Interesting issue. I have the wireless charging s-view case and I can confirm that this dos not happen with it. I guess that is due to the thicker back cover portion.
Hey guys,
I got myself a View Cover for my Note 3.
Now I've got a problem:
When completely opening the cover, so that the front view is on the back of my phone, the phone goes into the "cover is closed-mode", i got that square view and can go to camera and action-memos...
But i just wanted to use my phone normally,
Is it just me with that problem or has anyone the same problems?
phone is in "cover is closed-mode" when it's actually closed
phone is in normal mode when cover is opened
phone is in "cover is closed-mode" when it's flipped back completely
Thanks in advance!
Ochs said:
Hey guys,
I got myself a View Cover for my Note 3.
Now I've got a problem:
When completely opening the cover, so that the front view is on the back of my phone, the phone goes into the "cover is closed-mode", i got that square view and can go to camera and action-memos...
But i just wanted to use my phone normally,
Is it just me with that problem or has anyone the same problems?
phone is in "cover is closed-mode" when it's actually closed
phone is in normal mode when cover is opened
phone is in "cover is closed-mode" when it's flipped back completely
Thanks in advance!
Click to expand...
Click to collapse
I've got the same problem. I stopped using the s-view case because of it.
Some people say there were some defective batches where this was an issue (magnet too strong?), and others say they don't have the issue at all.
If you have the option, try exchanging it for a different one and see if you get better results.
I had the same thing happen as well. I let the company know and they gave me a new case. Hasn't happened since.
Are you guys talking about genuine S-View covers?
Because I get that sometimes on my cover, but it is a cheap chinese knock-off, so I don't mind it at all - it rarely happens anyway.
But I wouldn't accept that on a genuine Samsung cover.
I've tried another cover, too but the problem remained. I aswell am using some chinese knockoff, although it says samsung... But yeah, can someone tell me if the original view-cover got that problems?
Thanks for your replies!
Ochs said:
I've tried another cover, too but the problem remained. I aswell am using some chinese knockoff, although it says samsung... But yeah, can someone tell me if the original view-cover got that problems?
Thanks for your replies!
Click to expand...
Click to collapse
Genuine Samsung s-view cover doesn't have this issue
I've got a genuine cover and I don't have this problem at all.
If its a knock off, good chance the magnet in the front of the case is too strong. I've noticed if I put a magnet up to the bottom left of the phone, this will trick it into thinking the cover is closed. Similarly if its done from the back of the phone, if the magnet is too strong it will trigger the same. not sure if theres something you can place in the back cover of the case to shield it?
Comatose said:
I've got a genuine cover and I don't have this problem at all.
If its a knock off, good chance the magnet in the front of the case is too strong. I've noticed if I put a magnet up to the bottom left of the phone, this will trick it into thinking the cover is closed. Similarly if its done from the back of the phone, if the magnet is too strong it will trigger the same. not sure if theres something you can place in the back cover of the case to shield it?
Click to expand...
Click to collapse
First, thanks for your reply!
I will check if I can protect the back somehow.
But anyways, I am thinking of buying another view-cover because my phone won't recognize mine from time to time... Have to reattach it to get it back working.
First of all everything works fine. The problem is that the sticker I installed on the original back cover is slightly thicker than the original. When placing the cover back on the phone it is very tight. I've noticed that the LCD screen is pushing away from the frame on the left side of the phone (it's secured with glue). My quandary is should I unroot and send it back and get a different phone or just use my case to tuck in the screen? Will problems slowly start to arise?
Thanks
rtkhammer