Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
ANYONE?
goophone v88 i5 from dhgate seller name shenzhen
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Same here....unable to enter recovery mode after flashing CWM ...phone works but it "skips'" the recoverymode...factory mode works but yee...some solution for this would be nice......atleast i can still use the phone...altho with the stock rom witch is crap cause i cant back it up for flashing the phone...
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Any progress?
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Ok so problem solved.... unfortunately it will delete everything on your phone....i simply flashed the phone using SP-Flashtool and a rom from here => http://pan.baidu.com/share/link?shareid=324294&uk=540296524#dir/path=/Rom/Goophone I5 Rom supplyed by Zap ...
its the version v18 ... theres a v22 also you can download from http://pan.baidu.com/share/link?shareid=412131&uk=3022339290 but i havent tryed it yet so i dont know how well it works....
can you see what version your stock rom is? ... i think mine was 27 but im not 100% and i have been looking for a later version stock rom but i havent found any yet.....so yee.... the rom i installed now semes to be pretty much the same although it gave me lower antutu scores than the first one i had...dunno how mush that has to do with the software.... but userwise i havent noticed any major differance more than the charging animation thats different when the phone is switched of..and yes the system recovery 3e is in english
now ofcourse these roms are for the Fastcardtech Goophone I5 N2 micro simcard!!!
all is done at your own risk!!
also you HAVE TO INSTALL the mtk6577 VCOM driver in order to be able to use the sp.flastool correctly.....anything else might **** up your phone.... theres a good tutorial here http://forum.xda-developers.com/showthread.php?t=2206421
good luck and please post what stock version you have running now!! and if the phone is running fine otherwise maybe you want to reconsider flashing it since the versions i posted for download are v18 and v22....would love to get my hands on the newest stock rom...(did try to just flash the recovery image from the v18 but it bricked my phone)
jinishpv said:
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
Click to expand...
Click to collapse
Hello,
About that phone, i buyed that phone, from the same seller, yesterday.
It is fake?Its not the actual goophone i5s that we see on their website?
Thanks!
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
luponero76 said:
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
Click to expand...
Click to collapse
did you flash the colonelzap recovery with flashtool??
if your colonelzap cwm works then you should back up your rom with cwm...
(I have not tryed it my self but i think it should work)
download this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
uncompress and youl find a file called RECOVERY.IMG.....
now open your flashtool (i use sp-flashtool) and load the scatterfile "MT6577_Android_scatter_emmc.txt"
the flash tool is gonna show you a list with all the files that where in the zip..
uncheck all of them so the only one that is checkes is the RECOVERY.IMG ....and then you flash and TADA.....you should have your old S3 recovery back
if it all goes to **** you can just flash the complete rom and it will work.. .....atleast if you have the gooptone i5 n2/lte mtk6577
dont use mobile uncle for these files...that screwed up my phone....they need to be flashed to the phone!!
AND... this is the international v18 rom... dont know what version you have right now....but if you manage to make a back up rom of your phone PLEASE SHARE!!! .... ive been looking for the later international rom....and if you have the backup you can allways upgrade from the v18....so
GOOD LUCK!! ...keep us posted! ...and if you need more flashingdeetales you can just google or ask
CWM Goophone i5 N2 black screen
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
ja.viper said:
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Click to expand...
Click to collapse
virre62 said:
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
Click to expand...
Click to collapse
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
ja.viper said:
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
Click to expand...
Click to collapse
virre62 said:
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
Click to expand...
Click to collapse
I used your suggested version of SP_Flash_Tool_v3.1224.01 and I used 2 different recovery.img , but in both tries i got same error as you can see on image
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
ja.viper said:
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
Click to expand...
Click to collapse
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
ja.viper said:
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
Click to expand...
Click to collapse
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
well if you get the green circle then its most probably that your out of battery......leave the phone charging for some hours... flash it and when your doen unplug it from the computer and just start it and wait cause the first boot up usually takes time,.....maybe up to 2-10 min depending on what rom u flashed......if you dont have enough battery to complete first boot you might run in to problems.....and if you wanna test your hardware you press the volume + and power and you get in to the factory hardware test menu just if u wanna make sure that ur phone is ok
ja.viper said:
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
Click to expand...
Click to collapse
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Hello,
I have an Lenovo S960, which is an MTK 6589 Device.
Coming to the Point, Yesterday I my little sis didn't know what did, Phone Got Soft Brick.
Ohk, I tried to Re-Flash the ROM with SP Flash Tool Ver 3.1xx But somehow it got stuck on 18% and got error of brom error s_da_sdmmc_write_failed (3149).
When i tried to Format+All Download with the latest version of SP Flash Tool, it keep saying "Unrecognized Rom Detected".
Now, I tried Flashing the same ROM with different Versions of SP Flash Tool, and Got several Errors. amongst which one error really horrified me, i didn't remember exactly what was that, but it was something like No Valid partition Management Table.
After some research i found that the rom can be Flashed via MTK DROID TOOLS Onlyy, but for which i need Back Up of the Rom, which i didn't have.
The point is:
1) Is there any way to Flash the Rom with SP Flashtool bypassing these errors.
2) I would be very thank ful if any one can provide me the Back Up Rom for Lenovo Vibe X S960.
One more thing, This is my Fiance's Phone, and she's about to kill me if i didn't Give her phone on Sunday..
Please Help me..
Hello guys!
I've been trying and reading as much as possible and I haven't been able to bring my Viyo 5 Mini back to life, using SP FLASH TOOL, I have installed the drivers many times and in many different ways but nothing.
After a while looking up I found somwhere somebody said to deactivate the antivirus, I did it and it worked out but my phone ended up without IMEI and with the NVRAM error, so as it worked ONCE I tried to install a recovery to root it and fix these problems, but I got it bricked again, I tought I could rescue it again but after this it doesnn't work, the pc does the sound when I plug the phone but the SP Flash Tool does not start.
I install the drivers and they appear on Device Manager but they have the code 10 error saying the devices cant't start, only ONE works, the one that says Preload.
please someone help me I'm going crazy, I'm not very good at this but I used to handle it very well, it's this phone that is giving me trouble.
my pc it's on 64 bit and win 8, in case that info matters a lot, I have also tried running the SP Flash tool on XP (SP3) commpability
I have been switching the driver of the only device that seems to work to the others to see but still nothing.
thanks in advance for any help
the phone version again is Blu Vivo 5 Mini V050Q
Im a newbie. I flash my Wiko Lenny 2 with a wrong Rom of a Lenny 4.
Now the phone is dead. I cant charge it and the pc dont recognize it.
How can I do it?
I already have the correct firmware ready to be installed with SP Flash Tool but since the phone is not detected anymore on the PC I cant do it.
Please if you have solution tell me.
jakiroboz said:
Im a newbie. I flash my Wiko Lenny 2 with a wrong Rom of a Lenny 4.
Now the phone is dead. I cant charge it and the pc dont recognize it.
How can I do it?
I already have the correct firmware ready to be installed with SP Flash Tool but since the phone is not detected anymore on the PC I cant do it.
Please if you have solution tell me.
Click to expand...
Click to collapse
Sounds like you have bricked your device. Go on this thread, FWUL might be able to unbrick it.
https://forum.xda-developers.com/an.../live-iso-adb-fastboot-driver-issues-t3526755
did u fix ur problem?
I'm also has a Wiko Lenny 2 from my customer, the phone can be detected but can't flashing.
SPFT show me error of Enable Dram Failed 4032.