Related
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Sp flash tools - formatted android phone
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
naxilla100 said:
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
Click to expand...
Click to collapse
Same case here but ny device boot, its just doesn't have an operating system as it is formatted
aliranan8 said:
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Click to expand...
Click to collapse
same case here , after formatting , phone won't power on or can't be detected by sp flash tools , please please please , even if i connect a charger it is still not charging , is there hope for my dead phone? my phone is a110
Give it to customer care or flash factory image
Sent from my One V using Tapatalk
phone revived
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Same Problem
I have also the same case and given to service center. I am afraid whether service center will consider it under warranty.
BTW, how did you revive your phone ? I am interested to know.
I have XOLO Q700.
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
How?
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
hey gay i saw your post saiyng that your phone is revived? how you got it? i have a phone dead for sp tools and want to reive it.
wt***
I have the same problem guys I just flash my spice dream uno (android one) with sp flash tool after the flashing my phone is not booting up even now s.p. flasher is not searching my phone.......................
what i have try
1. reinstall drivers.
2. reinstall sp flash tool
3. try it with battry and with out it
4.try to flash it with out virson of s.p. flash tool
5. use new data cabal
but nothing is working
if any one know how to resolve it please help us
:crying::crying: :crying: :crying: :crying:
i formated my intex aqua i5 by the sptools now my phone not detected in sp flash tool through usb i cant find a way to install a firmware again.
please help me ...........................
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I haven´t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
same problem here
same problem here I try all method from google but I can't my suggestion to go service centre
fixed dazen 1
m.sajid969 said:
same problem here I try all method from google but I can't my suggestion to go service centre
Click to expand...
Click to collapse
Hey.. I have fixed my dazen 1 you can do so... Its easy.. Head to the following thread...
http://forum.xda-developers.com/che...g-boot-img-recovery-img-t3170809#post62587856
New thread..
http://forum.xda-developers.com/showthread.php?t=3236337
can we use custom recovery of same chipset phones
Hey guys,
Yureka Yunique and Yuphoria have same chipset as Coolpad Dazen 1 4g. So can we port their custom recoveries or custom rom into coolpad.??
Is there a tool or way to take full backup of Coolpad Dazen 1 4g like, boot.img, recovery.img, system.img, all radio related and other things??
Hi ,
i am trying to install ROM for coolpad dazen 1 i was selected wrong ROM ,so now my Mobil not working, not starting if u press any and at list it not recognize USB .if i connect USB it not identifying ,,plz any now to solution give me
thanks friends
modem soft bricked
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Shivakdl66 said:
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Click to expand...
Click to collapse
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
RAGHAV RT said:
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
Click to expand...
Click to collapse
Thanks I did it successfully.
Shivakdl66 said:
Thanks I did it successfully.
Click to expand...
Click to collapse
Ok bro
Solution
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Solution 123 said:
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Click to expand...
Click to collapse
If you really have solution then share it to others. It may help them to revive their android.
In my coolpad dazen 1 when I was try to flash new software it stop at 11%. What should I do? Plz help me. I tried both stock room software.
bricked my coolpad dazen 1
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
got it working
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
i have managed to get my coolpad dazen 1 back to life.what i have done is flash different partition with fastboot.
if ur coolpad boots in download mode and secure phone is written and cant be flashed with ygdp tool.there this method is applicable.
like fastboot flash (partition) (file name) .for example "fastboot flash system system.img".if u r confused let me explain widely-
1.I have coolpad stock firmware in .cfb file.you can download it from internet.
2.I installed ygdp tool latest version.To copy data of firmware.you can copy it just load the .cfb file in ygdp tool.Do not flash with it just load the firmware in ygdp tool now when checking is done. go to your ygdp tool installation directory like "c:/ygdp".where ygdp tool is intalled. go to folder downfiles there u will find a folder named 8297l-100 copy it to another safe location.
3.now open partition.xml file in 8297l-100.there u will find partition name and file name.
4.go to ur adb or fastboot folder.
5.open a cmd window by "shift+right click".
6.now command fastboot devices.if ur phone is detected u can flash the partition manually.like fastboot flash (partition name) (file name).
7.partition name should be named correctly otherwise it will fail.
"Tools " u will need-
1. coolpad dazen 1 drivers for pc
2. adb drivers for coolpad dazen 1.
3. ygdp tool latest
thats all folks hope u will able to unbrick ur dazen 1
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
jackey31 said:
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
Click to expand...
Click to collapse
bro go to this link-https://forum.xda-developers.com/android/help/coolpad-dazen-1-dead-plz-help-t3178510/page2#post71688300
dead
hey my coolpad dazen 1 is completly dead it does not show any mesage when connected to pc via data cable nd pressing vol up nd power button. how can i make this working
what happened to ur hanset before it gone dead pls explain
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
buddy pls tell us if
1. The phone is rooted.
2. The android version is factory or you installed it.
3. You are flashing the rom in stock recovery or other recovery.
When you bought it what was the android language?
If you are having trouble with flasing i advice you to use pc tools. Because in phone you will need to root the device first. If you well know the conditions of root. :good:
Hi Guys
i have bricked my Vodafone VF685/ Alcatel Pop D1/ Huawei U1860 or whatever make this is (quite confusing) with SP Flash tool MT6572.
I tried to flash CWM recovery (successfully rooted with KingRoot) with the Scatter file compatible with the SP Tool version. All went well, bur my phone didnt want to go past the start up logo. So i tried flashing it again, and now it doesnt want to switch on nor charge, cant boot into recovery. Just a dead phone with a black screen. My pc doesnt pick up my phone via usb and i get error code 4004, i did some searching on how to fix the error code but im still stuck in a rut...
Any advice on how to fix this and please any advice on how to tell which recovery and scatter and firmware is for this phone?
Model: V685-1
SVN: 120HJG1
MANF: TCT MOBILE LTD
CU REF: V685-2AVDZA1
Thank you in advance, i really appreciate your help and advice.
Johan
Well, this is quite dissappointing... Not a yes or a no... Nothing....