Hello guys,
so due to my phone getting bricked, when i fixed it, it no longer recognize the Cellular Network
as i asked in DC Phoenix Forum section (because that's the software that allowed me to unbrick my phone)
they said that now the problem is with my nv partitions and i need to flash it again
the problem is i don't have a back up of it, and it should be taken from a functional Honor 5X
so my request is for anyone out there who has this phone, to do a back up of this partition and send it to me to help me get my phone back and running
i'm looking forward for your help guy
Have a great day
Related
Hi guys,
Please help me out as i am stuck with the data settings on my phone. When i bought the evo 3d phone configured with reliance, everything was working well. Suddenly, my data network stopped. I contacted the seller and he gave me the new NV dump file stating that the older one is no more useful. He also told me to flash it on my device. He told me that i can do it using cdma workshop.
Can some one explain me the procedure for the same?
Your help is greatly appreciated.
Alright, so first of all, my Samsung Galaxy SIII got some damage, and then we brought it to a repair shop. They changed the motherboard, and then returned it to us and it was working fine. The only thing is, the Android version is still on 4.0.4, and whenever I boot the phone, a T-Mobile bootloading screen appears, and it annoys the hell out of me. So, I flashed Android 4.3 Jellybean using Odin. Yet, after the update finishes, the phone won't make a text or a call. It always says 'Not Registered On Network'. So here are some notes of the phone's status...
1. I tried to use Ariza Patch, yet it didn't work.
2. The IMEI's number is not changed to 0000 or anything, it's just a 15-digit number and has a '/01' at the end of it.
3. The signal is full.
How could this be fixed? Is there anyway to fix this? It would be very much appreciated. Thank you!
Take it back to the repair shop and tell them they botched the efs folder after their repair. You might be able to get a network by reading the sticky thread on efs, or the patch thread but you will always have problems with updates unless you get the efs folder sorted by a professional.
I did return the phone, then after that, they replaced the board again. After I tried to update it to 4.3 once again, the same thing happened, still not registered on network. :/
Hi,
Its been very recently that I bought SGS3 i9300 *exynos not qualcomm, in used phone and I'm pretty much in the dark what material does SAMSUNG puts into his phones to make them full of *beep*.
I was running XXELKC 4.1.2 firmware and I decied to just root > recovery > CM12.1 or CM13 SGS3.
Well everything went well but I ended up with no sim card error. Then I thought that might be my sim card is corrupted so I put in a newly replaced microsim card and put in the phone still no good.
Then I did wipe system+cache+dalvik+data and installed CM13 from TWRP. Still ended up in no simcard error.
Then I got to know about XXEMG emergency zip radio which is cross-efs compatible so I flashed that one. I ended up in NO IMEI/Baseband
I flashed XXELKC PDA file back and phone booted with its own IMEI number preserved.
Now I have working DATA connection but phone doesn't register on network for calls/sms.
What is the possible issue here?
I cannot find working modems link as the REF thread has dead link to modems.
I do not know how to fix this phone, and I've made myself a promise that this is my first and last samsung phone ever. Please help through this one for the last time, even it means working phone on a JB 4.1 firmware but I want the simcard/network/calls working to resell it and get rid of it.
Thank you for actually roaming around in Q&A section and taking a look.
Nobody?
Hello there fellows, i'll try to make my question simple. My uncle got a new phone so he threw away his old one which i took, its an LG V10 H901 its T-Mobile if i'm not mistaken, Anyways I'm out of Canada for a long time now and the phone is fully unlocked and runs on all the networks i was able to test, but its running android lollipop and i really upgrade to nougat, but from a previous experience with a Galaxy S6, upgrading just like that might lock back the network, and i have no idea if its the same case for this V10 too, as i am not in Canada anymore even contacting T-Mobile won't be that easy at all (tried before), so what i wanna know is, will the network get locked if i upgrade the Android ? as i'm going to do it manually since i can't receive OTA outside the region.
All informations are appreciated, and thanks in advance.
Edit: In T-mobile website where i enter the IMEI to see if my device is illegible for unlocking i got a congratulations saying my device can be unlocked.
- Also, The phone is rooted so my guess the bootloader should be unlocked right ? (Stock recovery btw). Now the weird part about that is that when i try to reboot to fastboot/bootloader from Terminal/ ADB/ Volume Down And USB/ Application With Root, there is no fastboot or bootloader i guess, i even found a similar post on the forums here but no answer for it too!
Now my guess that flashing the KDZ will flash all partitions and fix it but i am still afraid of the carrier lock!
In general, once a phone is unlocked, it stays unlocked forever as long as it disables the sim lock check in the phone and updating the software or doing factory reset doesn't change that. From what I have read and researched previously, the sim unlock status is stored and enforced via a certain partition on phone for example, in some phones it is nvram or nv data partition, the same partition that stores phone's IMEI number as well. It is not likely that you will loose sim unlock status just by updating to nougat.
But do keep in mind that that some of the LG V10 H901 T-Mobile versions have a korean motherboard where LG Bridge tries to update it with the wrong version of the rom bricking the phone, and people have reported here on XDA that even after unbricking they lost their IMEI info from the phone permanently and phone modem stops working.
I would suggest that you make sure which sub-variant of the H901 you have before you attempt to do any flashing, especially through LG UP.
I personally just bought a used H901 myself and was trying to decide if my phone is one of the ones with korean motherboard.
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Shan1122 said:
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Click to expand...
Click to collapse
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
last gspian said:
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
Click to expand...
Click to collapse
hey, sorry for late reply. Thank you for your answer. I got solution but as you said, with no Radio, I cannot make calls. my imei shows only 0-17. I think my imei totally erased. my methode was to debrick with file H90021w and then flash with H90021w.dz file. I convert kdz file to dz file by using LG_Firmware_Extract_v1.2.6.1. these files are available on internet. I got my phone back to life but without network. Phone is booting with AT&T logo and working fine other then network issue.
can anyone help me with network issue now?