I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
etnica- said:
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
Click to expand...
Click to collapse
The process wasn't successful, sorry. From what I understand after a bit of Googling, that error message means the firmware you were trying to flash wasn't compatible with your device. Either that or there was something wrong in the settings.
I found this on https://forum.hovatek.com/thread-439.html:
Error OXFC0
Message: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using https://forum.hovatek.com/thread-440.html
Delete the sp flash tool folder then re-extract
Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
If that doesn't work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
Consider using the latest version of Sp Flash tool
Format the phone before trying to flash the file(s) again
Click to expand...
Click to collapse
I did exactly what you said. I tried 3 different firmware with no luck. What can I do?
Related
Hi all.
I guess I am in deep trouble.
I have a Lenovo P780 (chinese base rom) 4gb version. Rooted it and installed with CWM recovery for P780. Installed Muse UI 3.0 custom rom from custom recovery via sd card. Swapped the internal SD with External SD card by editing the vold.fstab and vold.fstab.nand also.
However, I realised that there are a lot of bloatwares that took up the RAM and started uninstalling chinese apps that seems to come with the custom rom from system. However, when I restarted the phone, its now unable to boot beyond the 1st boot screen. (Boot loop)
Current state of the phone now:
1. Able to enter custom recovery mode, but menu is blank except for the navigation commands. (return, up, down, confirm)
2. Able to enter adb only when the phone is in custom recovery mode.
3. Able to connect to PC (Windows 7 64bit). Mediatek MT6589 usb drivers installed. Many versions of sp flash tools installed and tried.
4. Can't seem to enter fastboot for this phone. (Tried many key combinations. Only Meta mode, recovery mode and factory mode are found)
Things I had tried:
1. Flashing stock rom.
I had downloaded the stock roms and tried flashing with sp flash tools, but I always encounter the following errors. Had also tried switching to another windows XP based pc and still encounter these errors.
(a) Firmware -> upgrade. Tried Auto Format Flash also and it returns with the same errors.
- BROM ERROR: S_FT_FORMAT_FAILED (4010)
Format flash error. Possibly given wrong format range. Please check your format settings.
(b) Download (all img boxes checked)
- BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
Download to flash fail!
(c) Download (only one img checkbox ticked, tried system.img and recovery.img)
- - BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
Download to flash fail!
2. Flashing recovery from adb terminal via windows and usb connection
When I put the phone to the custom recovery (with missing menu options), the adb terminal is able to recognise the phone and returns the following after the command 'adb devices':
0123456789ABCDEF recovery
Upon entering the shell via 'adb shell', I am given the # sign. (already in SU mode?)
Tried to flash a recovery image from this mode via terminal command flash_image, but encounters the following problems:
(a) unable to mount/remount
- mount -o remount rw /system
mount: mounting rw on /system failed: Invalid argument
chmod 777 /system/flash_image
# flash_image recovery /sdcard/recovery.img
no response from the terminal after this command.
I had tried and tried these for more than a week after work, but had not been successful in reviving this phone. Appreciate if anyone can assist me as I had ran out of ideas already.... Please assist me in reviving this good phone. Many Thanks!
Axis76 said:
Hi all.
I guess I am in deep trouble.
I have a Lenovo P780 (chinese base rom) 4gb version. Rooted it and installed with CWM recovery for P780. Installed Muse UI 3.0 custom rom from custom recovery via sd card. Swapped the internal SD with External SD card by editing the vold.fstab and vold.fstab.nand also.
However, I realised that there are a lot of bloatwares that took up the RAM and started uninstalling chinese apps that seems to come with the custom rom from system. However, when I restarted the phone, its now unable to boot beyond the 1st boot screen. (Boot loop)
Current state of the phone now:
1. Able to enter custom recovery mode, but menu is blank except for the navigation commands. (return, up, down, confirm)
2. Able to enter adb only when the phone is in custom recovery mode.
3. Able to connect to PC (Windows 7 64bit). Mediatek MT6589 usb drivers installed. Many versions of sp flash tools installed and tried.
4. Can't seem to enter fastboot for this phone. (Tried many key combinations. Only Meta mode, recovery mode and factory mode are found)
Things I had tried:
1. Flashing stock rom.
I had downloaded the stock roms and tried flashing with sp flash tools, but I always encounter the following errors. Had also tried switching to another windows XP based pc and still encounter these errors.
(a) Firmware -> upgrade. Tried Auto Format Flash also and it returns with the same errors.
- BROM ERROR: S_FT_FORMAT_FAILED (4010)
Format flash error. Possibly given wrong format range. Please check your format settings.
(b) Download (all img boxes checked)
- BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
Download to flash fail!
(c) Download (only one img checkbox ticked, tried system.img and recovery.img)
- - BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
Download to flash fail!
2. Flashing recovery from adb terminal via windows and usb connection
When I put the phone to the custom recovery (with missing menu options), the adb terminal is able to recognise the phone and returns the following after the command 'adb devices':
0123456789ABCDEF recovery
Upon entering the shell via 'adb shell', I am given the # sign. (already in SU mode?)
Tried to flash a recovery image from this mode via terminal command flash_image, but encounters the following problems:
(a) unable to mount/remount
- mount -o remount rw /system
mount: mounting rw on /system failed: Invalid argument
chmod 777 /system/flash_image
# flash_image recovery /sdcard/recovery.img
no response from the terminal after this command.
I had tried and tried these for more than a week after work, but had not been successful in reviving this phone. Appreciate if anyone can assist me as I had ran out of ideas already.... Please assist me in reviving this good phone. Many Thanks!
Click to expand...
Click to collapse
BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
have you try to re-install the driver for sp flashtool
and use new sp flash tool for flashing
droidinterest said:
BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
have you try to re-install the driver for sp flashtool
and use new sp flash tool for flashing
Click to expand...
Click to collapse
Yep. Tried using several versions of the drivers downloaded from different places and used USBDeview to remove/reinstall them. The error still comes back and haunt me.
maybe this can help you
No luck.... formatting is not working in sp flash tool (4010 error) and the preloader in the thread is not for my phone.....
Anyone able to help pls....?
Axis76 said:
Anyone able to help pls....?
Click to expand...
Click to collapse
have you use google my brother ? google is our true friend.
but i glad if i can help you:angel:
you can visit this for factory rom
or you can visit lenovo forum
or you can go to needrom
Yeah. Google had been my fren, but no more after googling for 2 weeks without a solution. Trust me. I had looked thru most solutions found in google and had tried without any success before I post here.
All those stock roms of all release numbers I had already tried as mentioned above, with sp flash tools (tried many versions of that also.) ALL attempts are stucked with the errors mentioned above. The sp flashtool simply just fills the red status bar, and stopped with one of the errors in my 1st post.
I've even checked the chinese forums. My situation seems to be this:
The partition table of the flash memory had been reformatted thanks to the custom rom flashed via sd card. That's why it always returns a format flash error when I attempt to flash back to the stock rom which uses a different format range using sp flash tools. The only way out is to do a clean format of the flash memory. But I haven't find a way to do that via sp flash tool or mtk droid tool.
My only recourse is on of the following:
1. If I can restore the custom recovery (via adb in recovery mode(no fastboot) or meta mode) and make it workable to do another sd card flash with a custom rom. I have no idea why the options in my custom recovery went missing. It was working before I flashed the custom rom. I guess that accursed rom somehow erased my custom recovery during boot.
2. If I can somehow be able to do a complete flash format with the correct format parameters using some tools. Sp flash tools had failed me so far.
Anyone is able to help in these directions? Many thanks....
The sp flash tool log also have this line when I searched for 'Errors'
FlashTool[2684][8556][DEBUG]: ERROR: OperationIndicator::QueryDADLHint(): da_dl_type(??) error, could not find DA download hint!(.\OperationIndicator.cpp,98)
anyone can help......?
Axis76 said:
The sp flash tool log also have this line when I searched for 'Errors'
FlashTool[2684][8556][DEBUG]: ERROR: OperationIndicator::QueryDADLHint(): da_dl_type(??) error, could not find DA download hint!(.\OperationIndicator.cpp,98)
Click to expand...
Click to collapse
if i view logcat, there are some cause.
what sp flash tool do you use?
try flash one file with sp flash tool like recovery.img
and how the results ?
i will be back
droidinterest said:
if i view logcat, there are some cause.
what sp flash tool do you use?
try flash one file with sp flash tool like recovery.img
and how the results ?
i will be back
Click to expand...
Click to collapse
Almost every sp flash tool version I came across to....
SP_Flash_Tool_exe_v3.1248.0.96-MT6589
SP_Flash_Tool_exe_v3.1312.0.139
SP_Flash_Tool_exe_v3.1316.0.150
SP_Flash_Tool_v3.1224.0.sn85
SP_Flash_Tool_v3.1304.0.119
SP_Flash_tool_v3.1308.0.125
SP_Flash_Tool_v3.1320.0.163
SP_Flash_Tool_v3.1328.0.183
SP_MDT_exe_v3.1304.00_A2013.02.26_customer6589
SP_MDT_v3.1228.00
etc
As mentioned in my first post, 4008 error when I flashed 1 file.
Axis76 said:
Almost every sp flash tool version I came across to....
SP_Flash_Tool_exe_v3.1248.0.96-MT6589
SP_Flash_Tool_exe_v3.1312.0.139
SP_Flash_Tool_exe_v3.1316.0.150
SP_Flash_Tool_v3.1224.0.sn85
SP_Flash_Tool_v3.1304.0.119
SP_Flash_tool_v3.1308.0.125
SP_Flash_Tool_v3.1320.0.163
SP_Flash_Tool_v3.1328.0.183
SP_MDT_exe_v3.1304.00_A2013.02.26_customer6589
SP_MDT_v3.1228.00
etc
As mentioned in my first post, 4008 error when I flashed 1 file.
Click to expand...
Click to collapse
I think it's because the driver is not installed, try to disable digital signature on your windows, and reinstall driver for your phone
for how to disable digital signature go to this
droidinterest said:
I think it's because the driver is not installed, try to disable digital signature on your windows, and reinstall driver for your phone
for how to disable digital signature go to this
Click to expand...
Click to collapse
Already tried this. I had tried on 2 pcs. Windows 7 and windows xp (no digital signature). Same errors occur in both pcs. I really don't know what is going on with this phone. Nothing seems to work.
PS: Have been running the program as administrator all along also.
Sent to a phone repair shop and its at worst state than before now. Unable to power on. Connecting phone to computer and tried using sp flashtool now gives 4032 error (Enable Dram failed).
Any hope with reviving this phone now?
leno p780 in bootloop
please help
I tried to flash viberom from needrom but failed miserably & now the phone is in infinite bootloop.
screens just lights up slightly & then phn vibrates & then screen lights out & the loop continues even the boot logo doesn't show up
no keys working for CWM mode or anything
AshishKhalkho2013 said:
please help
I tried to flash viberom from needrom but failed miserably & now the phone is in infinite bootloop.
screens just lights up slightly & then phn vibrates & then screen lights out & the loop continues even the boot logo doesn't show up
no keys working for CWM mode or anything
Click to expand...
Click to collapse
Hi, first, do you have SP Flash Tool installed on your PC and have the drivers installed? If yes, download the stock ROM of your choice from here and flash it with via SP Flash Tool, and your phone should be revived.
Flashing methods are clearly stated in case if you don't know how to do it.
lenovo p780 not booting
Help please by mistake i tried to convert a system app to user the name of app is classical i tried to convert by system/app application suddenly my phone gets off automatically and now not booting up stucked at boot logo tried pressing the reset button nothing happend plzz help
somu12345 said:
Help please by mistake i tried to convert a system app to user the name of app is classical i tried to convert by system/app application suddenly my phone gets off automatically and now not booting up stucked at boot logo tried pressing the reset button nothing happend plzz help
Click to expand...
Click to collapse
http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-brick-t2782696/post53395430
WHAT CAN I DO___???
hardware
Axis76 said:
anyone can help......?
Click to expand...
Click to collapse
check on hardware, there must be trouble with your flash chip ic, try to rehot it first.
if doesn't work that mean your flash chip ic completely dead
Hi All,
My auxus nuclea N1 got hung while browsing and it shutdown and now it is DEAD and not powering up. I tried to boot it up to recovery mode which did not work, My device does not even show the charging icon when i plug it to the charger.
I tried to flash different kinds of firmwares using SP Flash Tool, But i keep getting the error "4032" with or without the battery.
I have tried the various combinations such as pressing power only; volume up only, volume down, power+volume up , power+volume down. but still the same error; when I click download / firware upgrade, it shows the 100% in red line and after 35-42 secs gives the error.
I am currently using Win-7, but I have also tried with Win-Xp machine and also a different laptop and different cable with the same result.
I have also tried different version of the sp flash tool.
I have tried the 3 different versions of firmware that the company has provided till date but keep getting the same error.
AuxusNucleaN1_20130703
Auxus_Nuclea_N1_20130824
NucleaN1_20131211
I have attached the screenshots of the sp flash tool process I have followed and also the SP flash log files across multiple runs. Plz let me know how to fix this.
SpFlashTool_Screenshots.docx -- contains the screenshots
SP_FT_Logs.zip -- contains the logs of sp flash tool
The complete error is given below:
---------------------------
Smart Phone Flash Tool
---------------------------
Common Hint: For SP Flash Tool issues:
Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t(Tool Title Hint: Runtime Trace Mode);
3. [Menu]Help-[SubMenu]Open logs folder.
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
---------------------------
OK
I got the same problem to my phone also. What need to do?
we got same problem but im still fixing mine right now
based on my research here is someways to fix it
-Unbrick
https://www.youtube.com/watch?v=0J7gjY3nEuU
-Enable DRAM FAILED
http://forum.xda-developers.com/showthread.php?t=2663680
-unbrick
http://forum.xda-developers.com/showthread.php?t=1943442
-MTK Droid Root & Tools
http://forum.xda-developers.com/showthread.php?t=2160490
-enable_dram_fail
http://forum.xda-developers.com/showpost.php?p=47161578&nocache=1&z=6513086356953772
-LCOLO to GRND
http://forum.xda-developers.com/showthread.php?p=44208574#post44208574
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Try to hard reset. Hold down the power button for at least 30 seconds. On devices that support it, the screen will turn off and the device should begin to cold reboot. A cold boot is where a device starts up from a power-off state. If that doesn't work you might have to test just how "nonremovable" their battery is and disassemble your device. If there aren't wires coming from the battery that are soldered to the phone's circuit board then it should be removable.
Hello to everyone,
I have the same GO phone. Do not try to open it (with purpose to take off the battery). To connect that phone in preloader mode just press volume up and then connect it in your pc. If you have the correct usb drivers, SP flash will find your phone.
I have done it and it worked for me. I have rooted my GO N1-y and I have used SP flash to unbrick my phone (I faced a problem with SP flash v.5.1352.01 and as a result I bricked my phone) using the official ROM. I did it with SP flash v.3.1320.0.174.
So, please give any feedback in case you find a custom rom for N1-Y.
Be good!!
thanasisvas said:
Hello to everyone,
I have the same GO phone. Do not try to open it (with purpose to take off the battery). To connect that phone in preloader mode just press volume up and then connect it in your pc. If you have the correct usb drivers, SP flash will find your phone.
I have done it and it worked for me. I have rooted my GO N1-y and I have used SP flash to unbrick my phone (I faced a problem with SP flash v.5.1352.01 and as a result I bricked my phone) using the official ROM. I did it with SP flash v.3.1320.0.174.
So, please give any feedback in case you find a custom rom for N1-Y.
Be good!!
Click to expand...
Click to collapse
I'm on my phone but I have another thread where I've discussed my many rom uses on the N1-Y
I've just found what I think is the best rom.
It's actually made for the Xolo Q1000s (the q1000s plus is pretty much a rebranded go n1y)
http://www.xolo.in/xolocare/software-update?page=3
If your try to Flash it via cwm it'll give an error.
I used 7 zip to view the archive and I edited it so that it never checked build.prop.
Flashed fine and is working great.
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Im not sure about your device, but i believe if your battery is not removeable, there will be a way to turn off your phone.
try pressing volume up and power until it vibrates 3 times, if its sony then this will work, try other button combination too
Try this : press volume up + volume down + Power
it work
MrMaddTraxx said:
Try this : press volume up + volume down + Power
Click to expand...
Click to collapse
I have mtk a device with a non-removable battery and I tried SEVERAL thing nothing works the dvice wase break dead then i tray these
prese up volume + down volum + power buttons and hold down and
i clique download in spflash tool
HaniAnis said:
I have mtk a device with a non-removable battery and I tried SEVERAL thing nothing works the dvice wase break dead then i tray these
prese up volume + down volum + power buttons and hold down and
i clique download in spflash tool
Click to expand...
Click to collapse
Well if you read the previous reply you should've noticed it was that combination to turn the device off.
I don't know what kind of problem you have so I have no idea how I could help you unless you say so
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Listen
your phone is rebooting but not showing on the screen
so what you need to do is
just try various combination like
vol up and vol down
vol up and power
vol down and power
and try this combination and keep pressing the button
and connect device to pc
and you will get the error that device power up too early
and the reason for the error is
reboot of device but no display on screen
so just try and try until your pc detect device and flashing starts
and believe me this the correct method
because i have repaired my phone with same method and i am sure because it worked for me three times
so keep trying the combination and at a moment your flashing tool
will start the flashing?
:fingers-crossed::fingers-crossed:
Give a LIKE :good::good:
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Hope my solution will help
i have an old phone hesens HE-F4 i insert sim card (GSM) and it displays no UIM card currently all the relevant apps of messaging internet and calls cannot be accessed how do i make it work
Hello!
My phone, Acer Liquid Z630s, recently had a problem and ended up shutting off as soon as it boots up. I turn it on, the Acer powered by Android white screen shows up then immediately shuts off. What was the problem here?
I couldn't access recovery mode either because it would also show up the same thing above then shut off immediately before it can even reach the recovery mode menu. But I could plug it in directly into download mode through SP Flash Tools because the phone vibrates when I hold down the volume up + power buttons (aka the recovery mode combination which was I think also the download mode combination). I downloaded the correct stock ROM off the Acer website (MT6753) and flashed it. The ROM was successfully flashed. But when I turned it on the screen lit up but it was just a blank black screen. It was lit up, but it was just dark black. I tried to wipe the system and flash the ROM again and at the end of the process, an error message appeared and I looked up the error code and this was exactly it:
"Error 6104
Message: BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR CODE : 0X00
Meaning: Wrong flash settings or firmware
Solution:
Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
Go to Options > Option > Connection > USB Speed > Full Speed
Go to Options > Option > Download > Untick DA DL All with Checksum"
I did what the solution told me, and as I tried to flash the ROM again, but I couldn't turn on my phone anymore. The volume up + power button combination no longer produces a vibration, and when I plug it into my computer it gets detected as a MediaTek USB Port (COM6) but SP Flash Tools no longer detects my phone and gives off this error:
"Error 0x13BE
Message: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash"
I don't know what to do at this point. Is it beyond salvation? But my phone still gets detected by my computer and it still produces the sound when you connect a device through the USB ports. Help me please.
Thank you in advance.
Hi , flash this firmware and in Sp Flash Tool set to Download only !!! When you Do Format + Download you lose your imei !
https://drive.google.com/uc?id=12CdmQaP8wi52RZO4jvjSikTWi2l4I1ZN&export=download
Teddy Lo said:
Hi , flash this firmware and in Sp Flash Tool set to Download only !!! When you Do Format + Download you lose your imei !
https://drive.google.com/uc?id=12CdmQaP8wi52RZO4jvjSikTWi2l4I1ZN&export=download
Click to expand...
Click to collapse
Hi there Teddy. Maybe you could help me. I was actually trying to make use of the same thing. SPFT. i flashed the stock rom. i tried rebooting it. seems that it has been bricked. I am using Starmobile Up Prime.
lexpizarro said:
Hi there Teddy. Maybe you could help me. I was actually trying to make use of the same thing. SPFT. i flashed the stock rom. i tried rebooting it. seems that it has been bricked. I am using Starmobile Up Prime.
Click to expand...
Click to collapse
Hi, If you flashed right stock firmware for your device correctly, your device it should not be bricked so I thing your flash file are not good.
Explain me what did you tried and which file you flashed?
Hello all good souls over here.
Could you please help me out with flashing back the original stock ROM to Mediatek MT6737M phone?
UMAX VisionBook P50 LTE, Mediatek MT6737M, 2GB RAM, 16GB internal memory.
What happened:
Before I was trying Oukitel P5 Pro ROM as well as Lineage OS and flashing with SP Flash Tool was working just perfectly.
But then I tried to flash Oukitel P5 Pro Andorid 7 stock ROM. (Oukitel P5 Pro and UMAX VisionBook P50 LTE are completely the same phones. Just different branding)
(And from now on I am not sure if I remember correctly)
When I loaded in scatter file, SP Flash Tool said something about something .... and recommended to do "Format all + Download" and I have done so.
Clicked on the Download button, flashing started instntly when I connected the phone while holding Volume - button.
Flashing stopped in maybe one second with the error which I do not remember as I closed the error window way too quickly. :-(
Later on I noticed that the preloader file is different in this Android 7 ROM then Android 6 ROM.
What is the current behavior:
When the phone is connected (with the battery inside) to the computer phone keeps connecting and disconnecting (appearing in Device manager as Mediatek USB Port) if I click Download button it starts doing "something" instantly which stops at Download DA 100% and after the while ERROR: S_FT_ENABLE_DRAM_FAIL (4032) pop up windows shows up.
The same error happens if I try to Format it and all other combinations in Download tab (Firmware upgrade, Format All + Download)
If I plug in the phone to the computer while pressing Volume - button phone will show up in the Device manager after about 20 seconds.
(Just to note - When the phone was working OK, I started flashing instantly when I plug the phone into the computer while pressing the Volume - button
So that kind of leads me that if nothing will show up in Device manager when I plug the phone to the computer while pressing Volume - button, then there might be the issue with the phone not switching into META mode? Not sure, just what I have read. But I cannot move any forward at this point.)
What I have tried:
- Correct stock ROM and Oukitel stock ROM (both Android 6 and both I was able to flash correctly and was able to boot them, until I tried Android 7 ROM)
- various SP Flash Tools 5.xxxx (and 3.xxxx too, but version 3 does not accept scatter file at all)
- USBDeview and removing all related USB devices from Windows and re-install them back again.
- Various VCOM drivers I have found on the Internet
- Flashing with SP Flash Tools on Linux (ends up with the exact same result - 4032)
- I tried shorting test point to ground on the phone main board. (The result was the same like when I plug the phone in while holding the Volume - button - Phone would not show up in Device manager for about 20 seconds)
- Tried flashing with the battery inside and outside the phone. (When the battery is outside flashing would not start, but the error about incorrect chip type will show up)
- Read many articles about this error all over the Internet
Do any of you think there is a change to bring the phone back to live? Or do you know what actually might happen to the phone? It does not seems to be completele bricked, but I cannot say in what state the phone is.
Thank you very much for your help and have a nice day.
Hi. I need this rom for this phone. I have umax p50 lte too . Please give me link if you can. Thx
@oukitel654
Look inside here:
Common SP Flash Tools error and Solutions - ROM-Provider
Common SP Flash Tools error and Solutions: Hello guys if you are facing a SP Flash tools error code issue then this page is for you where we share solutions for for almost all SP Flash tools error. Common SP Flash Tools error Code: Error 5054, 4032, 8038, 5069, 4001, 4008, 3149, 3168, 2004, 1013, …
romprovider.com