Hi All,
My auxus nuclea N1 got hung while browsing and it shutdown and now it is DEAD and not powering up. I tried to boot it up to recovery mode which did not work, My device does not even show the charging icon when i plug it to the charger.
I tried to flash different kinds of firmwares using SP Flash Tool, But i keep getting the error "4032" with or without the battery.
I have tried the various combinations such as pressing power only; volume up only, volume down, power+volume up , power+volume down. but still the same error; when I click download / firware upgrade, it shows the 100% in red line and after 35-42 secs gives the error.
I am currently using Win-7, but I have also tried with Win-Xp machine and also a different laptop and different cable with the same result.
I have also tried different version of the sp flash tool.
I have tried the 3 different versions of firmware that the company has provided till date but keep getting the same error.
AuxusNucleaN1_20130703
Auxus_Nuclea_N1_20130824
NucleaN1_20131211
I have attached the screenshots of the sp flash tool process I have followed and also the SP flash log files across multiple runs. Plz let me know how to fix this.
SpFlashTool_Screenshots.docx -- contains the screenshots
SP_FT_Logs.zip -- contains the logs of sp flash tool
The complete error is given below:
---------------------------
Smart Phone Flash Tool
---------------------------
Common Hint: For SP Flash Tool issues:
Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t(Tool Title Hint: Runtime Trace Mode);
3. [Menu]Help-[SubMenu]Open logs folder.
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
---------------------------
OK
I got the same problem to my phone also. What need to do?
we got same problem but im still fixing mine right now
based on my research here is someways to fix it
-Unbrick
https://www.youtube.com/watch?v=0J7gjY3nEuU
-Enable DRAM FAILED
http://forum.xda-developers.com/showthread.php?t=2663680
-unbrick
http://forum.xda-developers.com/showthread.php?t=1943442
-MTK Droid Root & Tools
http://forum.xda-developers.com/showthread.php?t=2160490
-enable_dram_fail
http://forum.xda-developers.com/showpost.php?p=47161578&nocache=1&z=6513086356953772
-LCOLO to GRND
http://forum.xda-developers.com/showthread.php?p=44208574#post44208574
Related
Hi
I'm stuck in boot-loop, just before auto-restart the error message appears: "=>TOOL DL IMAGE FAIL!". My phone is Lenovo P780.
When I tried flashing with some ROW ROME I'm getting a
"brom error s_com_port_open_fail (1013)"
Unable to open Com7. I have win8 and not able to install the exact MTK driver please share the link for MTK driver also thanks.:crying::crying:
Please suggest me some thing..
Syed Moin said:
Hi
I'm stuck in boot-loop, just before auto-restart the error message appears: "=>TOOL DL IMAGE FAIL!". My phone is Lenovo P780.
When I tried flashing with some ROW ROME I'm getting a
"brom error s_com_port_open_fail (1013)"
Unable to open Com7. I have win8 and not able to install the exact MTK driver please share the link for MTK driver also thanks.:crying::crying:
Please suggest me some thing..
Click to expand...
Click to collapse
Uninstall the driver and reinstall again. Restart pc....This happens when you remove connection during flash process ...... Press n hold the red button while connecting usb to PC and release after you press download button on flash tool
Device is Huawei Ascend y600-u20
It's completely dead, it will only vibrate when holding the power button.
I'm trying to fix it with SPflash tools. but i'm encountering this one error
I can flash Preloader alone without any problem. but when i try flashing everything else or anything else it gives "BROM ERROR: ?? (8)"
Also I Can Format "whole flash", but when i try "whole flash except bootloader" i get this error: "BROM ERROR : S_DL_READ_PT_FAIL (5073)"
I have correct drivers installed, Correct Rom and have tried different versions of spflash tool. Also tried flashing without battery. same thing happened every time
any ideas what i'm doing wrong?
Device is Huawei Ascend y600-u20
It's completely dead, it will only vibrate when holding the power button.
I'm trying to fix it with SPflash tools. but i'm encountering this one error
I can flash Preloader alone without any problem. but when i try flashing everything else or anything else it gives "BROM ERROR: ?? (8)"
Also I Can Format "whole flash", but when i try "whole flash except bootloader" i get this error: "BROM ERROR : S_DL_READ_PT_FAIL (5073)"
I have correct drivers installed, Correct Rom and have tried different versions of spflash tool. Also tried flashing without battery. same thing happened every time
any ideas what i'm doing wrong?
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
etnica- said:
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
Click to expand...
Click to collapse
The process wasn't successful, sorry. From what I understand after a bit of Googling, that error message means the firmware you were trying to flash wasn't compatible with your device. Either that or there was something wrong in the settings.
I found this on https://forum.hovatek.com/thread-439.html:
Error OXFC0
Message: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using https://forum.hovatek.com/thread-440.html
Delete the sp flash tool folder then re-extract
Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
If that doesn't work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
Consider using the latest version of Sp Flash tool
Format the phone before trying to flash the file(s) again
Click to expand...
Click to collapse
I did exactly what you said. I tried 3 different firmware with no luck. What can I do?
Hello all good souls over here.
Could you please help me out with flashing back the original stock ROM to Mediatek MT6737M phone?
UMAX VisionBook P50 LTE, Mediatek MT6737M, 2GB RAM, 16GB internal memory.
What happened:
Before I was trying Oukitel P5 Pro ROM as well as Lineage OS and flashing with SP Flash Tool was working just perfectly.
But then I tried to flash Oukitel P5 Pro Andorid 7 stock ROM. (Oukitel P5 Pro and UMAX VisionBook P50 LTE are completely the same phones. Just different branding)
(And from now on I am not sure if I remember correctly)
When I loaded in scatter file, SP Flash Tool said something about something .... and recommended to do "Format all + Download" and I have done so.
Clicked on the Download button, flashing started instntly when I connected the phone while holding Volume - button.
Flashing stopped in maybe one second with the error which I do not remember as I closed the error window way too quickly. :-(
Later on I noticed that the preloader file is different in this Android 7 ROM then Android 6 ROM.
What is the current behavior:
When the phone is connected (with the battery inside) to the computer phone keeps connecting and disconnecting (appearing in Device manager as Mediatek USB Port) if I click Download button it starts doing "something" instantly which stops at Download DA 100% and after the while ERROR: S_FT_ENABLE_DRAM_FAIL (4032) pop up windows shows up.
The same error happens if I try to Format it and all other combinations in Download tab (Firmware upgrade, Format All + Download)
If I plug in the phone to the computer while pressing Volume - button phone will show up in the Device manager after about 20 seconds.
(Just to note - When the phone was working OK, I started flashing instantly when I plug the phone into the computer while pressing the Volume - button
So that kind of leads me that if nothing will show up in Device manager when I plug the phone to the computer while pressing Volume - button, then there might be the issue with the phone not switching into META mode? Not sure, just what I have read. But I cannot move any forward at this point.)
What I have tried:
- Correct stock ROM and Oukitel stock ROM (both Android 6 and both I was able to flash correctly and was able to boot them, until I tried Android 7 ROM)
- various SP Flash Tools 5.xxxx (and 3.xxxx too, but version 3 does not accept scatter file at all)
- USBDeview and removing all related USB devices from Windows and re-install them back again.
- Various VCOM drivers I have found on the Internet
- Flashing with SP Flash Tools on Linux (ends up with the exact same result - 4032)
- I tried shorting test point to ground on the phone main board. (The result was the same like when I plug the phone in while holding the Volume - button - Phone would not show up in Device manager for about 20 seconds)
- Tried flashing with the battery inside and outside the phone. (When the battery is outside flashing would not start, but the error about incorrect chip type will show up)
- Read many articles about this error all over the Internet
Do any of you think there is a change to bring the phone back to live? Or do you know what actually might happen to the phone? It does not seems to be completele bricked, but I cannot say in what state the phone is.
Thank you very much for your help and have a nice day.
Hi. I need this rom for this phone. I have umax p50 lte too . Please give me link if you can. Thx
@oukitel654
Look inside here:
Common SP Flash Tools error and Solutions - ROM-Provider
Common SP Flash Tools error and Solutions: Hello guys if you are facing a SP Flash tools error code issue then this page is for you where we share solutions for for almost all SP Flash tools error. Common SP Flash Tools error Code: Error 5054, 4032, 8038, 5069, 4001, 4008, 3149, 3168, 2004, 1013, …
romprovider.com