Hi
I'm stuck in boot-loop, just before auto-restart the error message appears: "=>TOOL DL IMAGE FAIL!". My phone is Lenovo P780.
When I tried flashing with some ROW ROME I'm getting a
"brom error s_com_port_open_fail (1013)"
Unable to open Com7. I have win8 and not able to install the exact MTK driver please share the link for MTK driver also thanks.:crying::crying:
Please suggest me some thing..
Syed Moin said:
Hi
I'm stuck in boot-loop, just before auto-restart the error message appears: "=>TOOL DL IMAGE FAIL!". My phone is Lenovo P780.
When I tried flashing with some ROW ROME I'm getting a
"brom error s_com_port_open_fail (1013)"
Unable to open Com7. I have win8 and not able to install the exact MTK driver please share the link for MTK driver also thanks.:crying::crying:
Please suggest me some thing..
Click to expand...
Click to collapse
Uninstall the driver and reinstall again. Restart pc....This happens when you remove connection during flash process ...... Press n hold the red button while connecting usb to PC and release after you press download button on flash tool
Related
Hi All,
My auxus nuclea N1 got hung while browsing and it shutdown and now it is DEAD and not powering up. I tried to boot it up to recovery mode which did not work, My device does not even show the charging icon when i plug it to the charger.
I tried to flash different kinds of firmwares using SP Flash Tool, But i keep getting the error "4032" with or without the battery.
I have tried the various combinations such as pressing power only; volume up only, volume down, power+volume up , power+volume down. but still the same error; when I click download / firware upgrade, it shows the 100% in red line and after 35-42 secs gives the error.
I am currently using Win-7, but I have also tried with Win-Xp machine and also a different laptop and different cable with the same result.
I have also tried different version of the sp flash tool.
I have tried the 3 different versions of firmware that the company has provided till date but keep getting the same error.
AuxusNucleaN1_20130703
Auxus_Nuclea_N1_20130824
NucleaN1_20131211
I have attached the screenshots of the sp flash tool process I have followed and also the SP flash log files across multiple runs. Plz let me know how to fix this.
SpFlashTool_Screenshots.docx -- contains the screenshots
SP_FT_Logs.zip -- contains the logs of sp flash tool
The complete error is given below:
---------------------------
Smart Phone Flash Tool
---------------------------
Common Hint: For SP Flash Tool issues:
Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t(Tool Title Hint: Runtime Trace Mode);
3. [Menu]Help-[SubMenu]Open logs folder.
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
---------------------------
OK
I got the same problem to my phone also. What need to do?
we got same problem but im still fixing mine right now
based on my research here is someways to fix it
-Unbrick
https://www.youtube.com/watch?v=0J7gjY3nEuU
-Enable DRAM FAILED
http://forum.xda-developers.com/showthread.php?t=2663680
-unbrick
http://forum.xda-developers.com/showthread.php?t=1943442
-MTK Droid Root & Tools
http://forum.xda-developers.com/showthread.php?t=2160490
-enable_dram_fail
http://forum.xda-developers.com/showpost.php?p=47161578&nocache=1&z=6513086356953772
-LCOLO to GRND
http://forum.xda-developers.com/showthread.php?p=44208574#post44208574
I flashed 4.4.2 Kitkat ROM to my Lenovo S5000-H using SP Flash Tool but it got Invalid IMEI and NVRAM error. I tried reflashing the ROM but this time it gave me an error TOOL Download image Fail!!!! I cant boot to Recovery and fastboot as well.
whenever I connect my device to my Laptop running on Win7(now updating to Win10) it detects the device but it connects the disconnects several times before I could fix the problem with my Driver which is why I cant flash the ROM to my Lenovo S5000-H using SP Flash Tool.
Is there another way to fix this or if you guys know how I can fix the connect-disconnect problem please Reply. Thanks
HadesGacheru said:
I flashed 4.4.2 Kitkat ROM to my Lenovo S5000-H using SP Flash Tool but it got Invalid IMEI and NVRAM error. I tried reflashing the ROM but this time it gave me an error TOOL Download image Fail!!!! I cant boot to Recovery and fastboot as well.
whenever I connect my device to my Laptop running on Win7(now updating to Win10) it detects the device but it connects the disconnects several times before I could fix the problem with my Driver which is why I cant flash the ROM to my Lenovo S5000-H using SP Flash Tool.
Is there another way to fix this or if you guys know how I can fix the connect-disconnect problem please Reply. Thanks
Click to expand...
Click to collapse
Well I had the same problem, am not an pro, and man u gotta understand, I opened device manager (Right click my computer, properties, device manager) then i realized that there was a new unknown device, I updated it from All MTK USB Driver 2014 i had downloaded earlier, then back to SP Flash Tool. and it completed the installation of my cutome rom
Hello and merry Christmas!
I've done a terrible mistake and installed the firmware for Doogee y100k on an y100 Pro which leads to a bricked device. Even the recovery mode (Power + VolUp) is not accessible anymore.
By trying to flash the right software via SP Flash i got the error: "Error 2020 Message: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)". I've also tried the following solutions:
- tick "with battery" in options
- tick "w/o battery" in options
- hold VolUp key while connecting to USB
- used the phone with and without battery
- used other versions of the firmware image
- used the most actual SP Flash Tool
- used an older version of SP Flash Tool
I am also not able to format the device - same error message occurs.
By holding VolUp and Vold Down i got the error "Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail "
I have also deinstalled the mediatek drivers with USB Deview and installed only "Mediatek Preloader USB VCOM Port" from the most actual archive i have found.
Can i consider this device as permanent bricked or is there any chance to fix it?
Thanks in advance
Patrick
FYI
:good::laugh:
Hello to you Patrick
I was in the same situation as you
After a lot of research and time I finally managed to unlock my phone.
If this still interress you, go for a walk on the site of "Needrom" (Google is your friend), I put the solution and the files needed to repair online at + YannickIDF
The same problem i have did you find solution pls
---------- Post added at 10:26 AM ---------- Previous post was at 10:24 AM ----------
Same problem i have. Did you find solution pls
Hi Everyone,
my lenovo tab had problem with boot, only lenovo image that appear when booting
I use tutorial and ROM and SPflashtool (newer too) from this thread
https://forum.xda-developers.com/showthread.php?t=2368913&page=14
but it always appear error PMT on SPflashtool when I try to download option
and then I format it but always format 0% and error appear again with ERROR : S_FT_FORMAT_FAIL (0xFAA)
I try to google it but I found nothing
I've try with another ROM, SPflashtool but this problem still occur.....
Can anyone have solution for this? pls
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
etnica- said:
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
Click to expand...
Click to collapse
The process wasn't successful, sorry. From what I understand after a bit of Googling, that error message means the firmware you were trying to flash wasn't compatible with your device. Either that or there was something wrong in the settings.
I found this on https://forum.hovatek.com/thread-439.html:
Error OXFC0
Message: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using https://forum.hovatek.com/thread-440.html
Delete the sp flash tool folder then re-extract
Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
If that doesn't work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
Consider using the latest version of Sp Flash tool
Format the phone before trying to flash the file(s) again
Click to expand...
Click to collapse
I did exactly what you said. I tried 3 different firmware with no luck. What can I do?