Related
hello everyone
I have yodarom v10.0 installed on my Honor 7, the developper stopped the developpement, and I would like to updated to another custom rom, based on B371.
1- How do I do this update, should I have to come back to stock rom first?
2- Wich custom rom do you think I should install, I hesitate , "Pure Emui" or H7cRom ? and why?
Thanks
All these roms have the same base , you dont need to go back to stock.
i run MMplusKang by WBT,the support is very good and the K-Settings features awesome
fredfred41 said:
hello everyone
I have yodarom v10.0 installed on my Honor 7, the developper stopped the developpement, and I would like to updated to another custom rom, based on B371.
1- How do I do this update, should I have to come back to stock rom first?
2- Wich custom rom do you think I should install, I hesitate , "Pure Emui" or H7cRom ? and why?
Thanks
Click to expand...
Click to collapse
Just boot into TWRP recovery.
Wipe data/factory reset. RECOMMENDED
Install the ROM of your choice.
Enjoy!!!
Sent from my PLK-L01 using Tapatalk
ok thanks both for your answers
I just installed and restored my settings and apps, with my hisuite backup.
90% worked well..
Just stucked at boot logo when trying to install xposed v86 sdk 23 arm64...
Do you have a simple workaround
Thanks, if it s not working I will try MM+Kang
vvv.phonandroid.com/forum/mm-kang-by-wbteam-v2-1-t157092.html
I would rather not to have to reinstall everything, But If I m forced to.. And the team seems french, It would be easier for me.
Thanks again
fredfred41 said:
ok thanks both for your answers
I just installed and restored my settings and apps, with my hisuite backup.
90% worked well..
Just stucked at boot logo when trying to install xposed v86 sdk 23 arm64...
Do you have a simple workaround
Thanks, if it s not working I will try MM+Kang
vvv.phonandroid.com/forum/mm-kang-by-wbteam-v2-1-t157092.html
I would rather not to have to reinstall everything, But If I m forced to.. And the team seems french, It would be easier for me.
Thanks again
Click to expand...
Click to collapse
After flashing Xposed you have to wait for a pretty much long time, it stays on boot screen according to the number of apps installed.
Sent from my Honor 7 using Tapatalk
Hi,
+1 with DigiGoon the boot is very long ,about 20mn for me.
I confirm we'r french but our rom run DigiGoon's kernel (simply the best)
DigiGoon said:
After flashing Xposed you have to wait for a pretty much long time, it stays on boot screen according to the number of apps installed.
Sent from my Honor 7 using Tapatalk
Click to expand...
Click to collapse
I waited, and it worked, thanks.
samcro94 said:
Hi,
+1 with DigiGoon the boot is very long ,about 20mn for me.
I confirm we'r french but our rom run DigiGoon's kernel (simply the best)
Click to expand...
Click to collapse
On first boot, after installing xposed, or everytime the phone boot?
Maybe I will give a try, later..
On the first boot.
HOT FIX AVAILABLE !
JUST Flash it !!
https://www.dropbox.com/s/6h4n9g44b...tch_1612271635_129f41209f_-235921700.zip?dl=0
Network drop completely gone ! :angel:
TO get OTA, just connect with VPN and select Germany/ Canada ! you can mirror the links !
hope this helps !
Will it work with Hydrogen?
Sent from my ONE A2003 using Tapatalk
so, can we use this OTA from Oxygen v3.1.0 to 3.5.6 or we need to upgrade to v3.5.5 and then go to v3.5.6? Please clarify.
gr8techie said:
so, can we use this OTA from Oxygen v3.1.0 to 3.5.6 or we need to upgrade to v3.5.5 and then go to v3.5.6? Please clarify.
Click to expand...
Click to collapse
It's incremental after 3.5.5. It's only 17mb.
sudhakarstoopy said:
Will it work with Hydrogen?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
not sure, as H2OS framework is different and i havent extracted the zip file to test if it really contains only modem ! u can try though !
gr8techie said:
so, can we use this OTA from Oxygen v3.1.0 to 3.5.6 or we need to upgrade to v3.5.5 and then go to v3.5.6? Please clarify.
Click to expand...
Click to collapse
if u r on 3.1.0, i will suggest you to download 3.5.5
and then flash / download the 3.5.6 !
this way all will be good ! :good: all the best
I'm on CM-14 right, wanna update to OS 3.5.6 what exactly I have to do and backup anything to tackle IMEI problem
yousuf.shareef said:
I'm on CM-14 right, wanna update to OS 3.5.6 what exactly I have to do and backup anything to tackle IMEI problem
Click to expand...
Click to collapse
no need to do anything !!
download 3.5.5 , flash it thru TWRP !
after that flash this file and you are good to go !
hope this helps ! and dont press thanks button ! just kidding !!
I have an OTA to 3.5.6. Its 1,2 gb. Not 17mb. Still on 3.1.0. What have to do now?
peluillo said:
I have an OTA to 3.5.6. Its 1,2 gb. Not 17mb. Still on 3.1.0. What have to do now?
Click to expand...
Click to collapse
Download the 1.2 GB file and install.
What about random reboots on cm based roms? Are they gone with this update aswell.?
msoniz said:
What about random reboots on cm based roms? Are they gone with this update aswell.?
Click to expand...
Click to collapse
No random reboot. Enjoy the update. Worry free
neelgangrade said:
No random reboot. Enjoy the update. Worry free
Click to expand...
Click to collapse
So after flashing this update, volte works on custom nougat roms without reboots?
flashing from twrp giving giving error 7
not enough space in /system to apply patches
but in settings i have used 46gb of 54gb
dark.knight.0000 said:
So after flashing this update, volte works on custom nougat roms without reboots?
Click to expand...
Click to collapse
This update has nothing to do with custom roms.
Bazilli said:
This update has nothing to do with custom roms.
Click to expand...
Click to collapse
of course, the modem does.....
My phone has forgot to sleep. Anybody for confirmation?
Any idea how to root?
Im always getting bootloop when I flash SuperSU-v2.79-Systemless
Aashish-kkhckr said:
flashing from twrp giving giving error 7
not enough space in /system to apply patches
but in settings i have used 46gb of 54gb
Click to expand...
Click to collapse
Flash full ROM. Better clean flash to avoid problems
Enviado desde mi ONE A2003 mediante Tapatalk
Hi, I am currently on Hydrogen OS 2.5.1. I want to go to either CM 14.1 or RR sooner or later. If I clean flash Oxygen OS 3.5.6 and then CM or RR, will I be able to use the phone normally? I mean, it won't break the IMEI of the phone and I'll still be able to use Volte without any network drop or reboot!
Hello,
I'm using from six months or so the Lineage OS rom for my device. Since I changed rom from MIUI to this my phone reboots by itself like 3 times per day. I want to know if there is a solution for this problem except changing rom.
I also have flashed the franco kernel and magisk, if this can give you more necessary informations
Thanks in advance
Flash another rom
don't know why you're using an outdated kernel..use default kernel for best experience
pumpkins12 said:
don't know why you're using an outdated kernel..use default kernel for best experience
Click to expand...
Click to collapse
There is a way to to that without installing miui or formatting the system?
xAlexFusion said:
There is a way to to that without installing miui or formatting the system?
Click to expand...
Click to collapse
download latest firmware+rom+gapps
wipe cache+dalvik+system+data
flash firmware+rom+gapps
I had the same problem on Lineage and OmniRom, so I wiped everything and installed ViperOS, all good
Hi,
On some pie ROM, my sim is not detected at boot, need to do Soft reboot, or sometimes, nothing work, need change ROM .
I already try to change my sim card and same issue ...
Anyone have same issue ?
Find solution?
Need u, please help me ! ?
Thanks
Oreo is perfect .
for some little issues pie is not suit for daily use
https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/rom-syberia-project-t3846212
This pie I had used,SIM feature is OK
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks
billouetaudrey said:
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks[/QUOTE
I had faced the same issue while flashing unofficial lineage OS 16 and also while flashing AEX Pie but that was because of corruption in my firmware so I changed my firmware by flashing the firmware first then my ROM and this solve my problem hope it helps you
Click to expand...
Click to collapse
Bhanu_p_mishra said:
billouetaudrey said:
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks[/QUOTE
I had faced the same issue while flashing unofficial lineage OS 16 and also while flashing AEX Pie but that was because of corruption in my firmware so I changed my firmware by flashing the firmware first then my ROM and this solve my problem hope it helps you
Click to expand...
Click to collapse
Hey, I already try to change FW a lot of time ? (stable and beta)
Which FW do u flash ?
Click to expand...
Click to collapse
billouetaudrey said:
Bhanu_p_mishra said:
Hey, I already try to change FW a lot of time ? (stable and beta)
Which FW do u flash ?
Click to expand...
Click to collapse
This one, order of flashing matters in my case
Wiped all partition(except internal storage, USB otg) - >flash firmware - >rom
https://mega.nz/#!jEkRHJJa!XrlsHz3P8_px5f7WAgo_MdEttRA0O8OJZ0w1jgM0Cyw
Click to expand...
Click to collapse
Bhanu_p_mishra said:
billouetaudrey said:
This one, order of flashing matters in my case
Wiped all partition(except internal storage, USB otg) - >flash firmware - >rom
https://mega.nz/#!jEkRHJJa!XrlsHz3P8_px5f7WAgo_MdEttRA0O8OJZ0w1jgM0Cyw
Click to expand...
Click to collapse
Seem to be OK ! Let me try lot of other rom , And I will conclude this !!!
Thanks very much
Click to expand...
Click to collapse
Finally don't help me
I flash Havoc, seem to be ok
I flash LOS, OK
I flash Havoc and restore data partition, not ok... Need to hot reboot for have simd detection
Had the same problem. Found a fix, just rename the simcard that does not get detected (name doesent matter). As soon as you click on ok, you are asked to type in your simcard pin and then it works fine.
I have this issue on ArrowOS for mido. Its an easy fix (at least for me).
Original: Link
Hi guys,
it's not my work, i'm just sharing.
https://drive.google.com/open?id=1TSGqgarTA8yDfH0KUYSgZkGyRA_qm_vF
this is the fixed version of the TWRP from 4PDA Russian forum.
It's a very good job. Work with last EU.DEV 9.7.25 and also Stable ROM.
If you rom is encrypted : it will ask the password
if your rom is not encrypted : it will not ask any password.
It's a different one from the RED SS one or the chinese one (that we all tried because it was the 1st one available)
For noob user, there is a autoinstallation script to launch from the PC, you just have to put your phone into fastboot mode, and double click on the bat.file.
There is also the vbmeta.img.
Have a nice day!
SOURCE : https://4pda.ru/forum/index.php?showtopic=955101
nesquix said:
Hi guys,
it's not my work, i'm just sharing.
https://drive.google.com/open?id=1TSGqgarTA8yDfH0KUYSgZkGyRA_qm_vF
this is the fixed version of the TWRP from 4PDA Russian forum.
It's a very good job. Work with last EU.DEV 9.7.25 and also Stable ROM.
If you rom is encrypted : it will ask the password
if your rom is not encrypted : it will not ask any password.
It's a different one from the RED SS one or the chinese one (that we all tried because it was the 1st one available)
For noob user, there is a autoinstallation script to launch from the PC, you just have to put your phone into fastboot mode, and double click on the bat.file.
There is also the vbmeta.img.
Have a nice day!
Click to expand...
Click to collapse
Can this be used on indian global rom K20?
manan001 said:
Can this be used on indian global rom K20?
Click to expand...
Click to collapse
normaly yes
btw this recovery dont **** anything, if it just dont work, flash back your previous twrp.
Thanks a lot! it works! Knew if i waited long enough there would be a fix without me having to format everything
Yeah thanks Russian people and my girlfriend who is Russian and can read all to register a account hahaha
Works perfectly. No need to wipe data :good:
works perfectly on EU 9.7.25, OTG is Ok, great graphic, not tested the backup but thanks to the developers
regards
What the vbmeta do ? Is it necessary to flash too ?
was just trying to figure out what happened to my twrp after installing latest dev rom. all versions failed.
this one works great just as twrp should work without too many unnecessary full wipes.
thanks for pointing us to the right direction.
tlf55 said:
What the vbmeta do ? Is it necessary to flash too ?
Click to expand...
Click to collapse
Disable the verified boot.
Not needed, you can flash only the twrp.img.
@nesquix could you link the source please?
Guys,
Do we first have to install de original chinese twrp and after this russian one? Or, we may install only de russian twrp?
I asked that because i though strange that the russian twrp has the half size (30mb) of the chinese one (67mb)!!
yes and also peoples who dont use windows as OS, please make universal instalation for windows, linux and os ox.
What should I Format loading twrp and xiami eu Ron or any other custom when they'll be available ?
This work nice perfect.
Sent from my MI 6 using Tapatalk
jacobobbo said:
What should I Format loading twrp and xiami eu Ron or any other custom when they'll be available ?
Click to expand...
Click to collapse
Data, dalvik and cache = Factory reset
Guys,
Sorry, but i Still did not understand. I need First to flash the chinese (or greek) twrp and after flash this one...or, i can Just flash this twrp?
mauriciocardoso said:
Guys,
Sorry, but i Still did not understand. I need First to flash the chinese (or greek) twrp and after flash this one...or, i can Just flash this twrp?
Click to expand...
Click to collapse
Not needed, just flash this one.
Ok, thank you, my friend!
---------- Post added at 10:34 PM ---------- Previous post was at 10:26 PM ----------
Guys,
May I flash this twrp, to after that pass from my actual miui global 10.3.10 in a europe device to a Mi-globe 10.3.12?
Or, I risk to Brick something?
Anybody knows?
mauriciocardoso said:
Guys,
May I flash this twrp, to after that pass from my actual miui global 10.3.10 in a europe device to a Mi-globe 10.3.12?
Or, I risk to Brick something?
Anybody knows?
Click to expand...
Click to collapse
There should be no problem, I'd do a back up and a clean install.