Closed
dlproject said:
Need testers, i'll build CrDroid for Albus
Click to expand...
Click to collapse
I'm willing to test it out. I use the Sprint network so hopefully you can get data to work.
I'm In! let's play.
Cleanser2012 said:
I'm willing to test it out. I use the Sprint network so hopefully you can get data to work.
Click to expand...
Click to collapse
Test this and tell me bro.
https://drive.google.com/drive/folders/1_w-N7ZO8KYEgEDj_8tyjlo9go_1OcNSW
kewlzter said:
I'm In! let's play.
Click to expand...
Click to collapse
so let's go!
https://drive.google.com/drive/folders/1_w-N7ZO8KYEgEDj_8tyjlo9go_1OcNSW
dlproject said:
so let's go!
https://drive.google.com/drive/folders/1_w-N7ZO8KYEgEDj_8tyjlo9go_1OcNSW
Click to expand...
Click to collapse
alrighty, installing now. let's see what you working with!
new back after I run it through paces
kewlzter said:
alrighty, installing now. let's see what you working with!
new back after I run it through paces
Click to expand...
Click to collapse
Don't forget to use TWRP 64bit: https://drive.google.com/open?id=1xANJGKX1SHDIgkjRJknms4CjhT0FQCSH
and make Format Data after flash ((if you come from stock)) make a backup of your internal sd is advisable
if you encounter an error while doing so, restart recovery and try again the Format Data.
Gapps Arm64 8.1
:fingers-crossed:
Nice This is dang near ready for prime-time
Working:
All radios (NFC,BT,Data/Coms,WiFi,GPS) appear fully functional.
Flashlight (including chop gesture)
All gestures working.
Gamepad Moto Mod
TurboPower Moto Mod.
Fast Charging ( TurboPower unknown, no indication with TP30 connected)
Headphone plug
Fingerprint reader (with improved gestures)
BUSTED:
Camera isn't functional. it will start up very slowly, takes photos, but switching between back to front breaks it.
JBL SoundBoost² mod, has no volume control.
Fails SaftyNet.
USB Data, connects for charging only.
Screenshots.
I'll be happy to revisit this again once the broken list shrinks a little. It's beyond my tolerance threshold. Lol
Is this Nougat or Oreo?
pizza_pablo said:
Is this Nougat or Oreo?
Click to expand...
Click to collapse
8.1
All is well, but after installing imei 0, after the return to stock imei appears, everyone could not figure it out.
maks_R said:
All is well, but after installing imei 0, after the return to stock imei appears, everyone could not figure it out.
Click to expand...
Click to collapse
"Everyone".
No, a few people who really have no business touching anything other than the power buttons on their phones.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://t.me/joinchat/EE4zKhLJPy-RjeysxjFJsg
Here you'll get some pretty nice testers that will provide you with the necessary logs.
Screenshot working for me
Camera working but slow startup
varun.katoch said:
Screenshot working for me
Camera working but slow startup
Click to expand...
Click to collapse
You try switching cameras?
mine works until I switch cams more than once, and yes it's super slow.
For screenshots I'm getting a message about not enough space to save. 34gb free.
kewlzter said:
You try switching cameras?
mine works until I switch cams more than once, and yes it's super slow.
For screenshots I'm getting a message about not enough space to save. 34gb free.
Click to expand...
Click to collapse
I like Moto Camera so I am using it..switching is slow but working fine tried multiple times ...screenshots worked perfectly for me ...I think you should try clean install ..Apart from slow camera startup ...no issues with the ROM..
*Xposed working fine
* Substratum working fine
* Good thing - CRT animation working fine ...All animations are amazing
* Hey Google working instead of boring OK google
Will update more ..
---------- Post added at 02:19 PM ---------- Previous post was at 02:12 PM ----------
04-22 17:45:35.898 E/LightsService(2215): Light requested not available on this device. 2
04-22 17:44:50.758 E/BufferItemConsumer(17549): [unnamed-17549-59] Failed to release buffer: Unknown error -1 (1)
---------- Post added at 02:20 PM ---------- Previous post was at 02:19 PM ----------
Using it as a daily driver now !! Cheers !!!
screenshots
varun.katoch said:
I like Moto Camera so I am using it..switching is slow but working fine tried multiple times ...screenshots worked perfectly for me ...I think you should try clean install ..Apart from slow camera startup ...no issues with the ROM..
*Xposed working fine
* Substratum working fine
* Good thing - CRT animation working fine ...All animations are amazing
* Hey Google working instead of boring OK google
Will update more ..
---------- Post added at 02:19 PM ---------- Previous post was at 02:12 PM ----------
04-22 17:45:35.898 E/LightsService(2215): Light requested not available on this device. 2
04-22 17:44:50.758 E/BufferItemConsumer(17549): [unnamed-17549-59] Failed to release buffer: Unknown error -1 (1)
---------- Post added at 02:20 PM ---------- Previous post was at 02:19 PM ----------
Using it as a daily driver now !! Cheers !!!
Click to expand...
Click to collapse
it's a good build super fast and smooth, I was going to use it as primary until I discovered the ScreenShots were broken for me.
do you have an SD card inserted?
is there an option to install anyway other than "clean"? it is 64bit. I'm under the impression you must format (not simply erase/wipe) to install.
kewlzter said:
it's a good build super fast and smooth, I was going to use it as primary until I discovered the ScreenShots were broken for me.
do you have an SD card inserted?
is there an option to install anyway other than "clean"? it is 64bit. I'm under the impression you must format (not simply erase/wipe) to install.
Click to expand...
Click to collapse
I have a 32gb mmc...I wiped all partition expect internal and external
varun.katoch said:
I have a 32gb mmc...I wiped all partition expect internal and external
Click to expand...
Click to collapse
it was sarcasm. you suggested I do a "clean install", I was only pointing out that there is no other way to install a 64bit OS. lol
but hold on! you didn't need to wipe/format data?
however, did you experience or know why some of my folders on my SD card show up as files and are unaccessible?
Related
What an exciting day its been!
You will need an unlocked bootloader for this
DO NOT FLASH THIS IF YOU DONT KNOW WHAT YOUR DOING
As the Sony Beta ROM thread is currently a jumbled mess, I thought it would be best to post it here.
The R800x users have always been left out of the crowd in terms of ROMs, so I thought this would be exciting.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HOW TO:
Download the Beta ROM from here, and install as it says in the post. (Will update with better instructions in time)
Whats Working:
CDMA Signal
Data (Thanks to paxChristos, see fix in EXTRAS section)
SMS
Whats Not Working:
3G Icon in Statusbar
Phone calls
Battery Drain (applies to all Xperia Play ICS builds.)
MMS
EXTRAS
ClockworkMod Recovery BootImage
SuperUser Fix
Google Apps
Browser Fix
DooMKernel ICS Beta
CDMA Signal Fix
CDMA Data Fix (Thanks to paxChristos)
THEMES
thomassafca's AOSP Theme
I will be constantly updating this thread with the status of ICS on the R800x.
Credits:
chevyowner: For pretty much everything here. Be sure to thank his posts.
paxChristos: Data Fix
Sony: For obvious reasons
Everyone at XDA: For everything as well.
how do i get an unlocked bootloader
phillip_viado said:
how do i get an unlocked bootloader
Click to expand...
Click to collapse
FPlusPS3 said:
Unlocking your R800x Bootloader has to be done via SETOOL 2 which is a paid service you pay for unlock packs or you can pay $24 to Alejandrissimo
(FREE ) Root = Root ... basically allows you to grant super permissions to the phone like removing bloatware like Skype and install Wifi USB tether apps and Overclocking and etc..
(PAID SERVICE ) Bootloader = allows custom roms / kernels to be installed / flashed ( Like CM9 aka ICS for us R800x people )
If you get both done YOU can basically control your entire phone by ruining cool new Operating systems / mods/ tweaks / cool apps
Click to expand...
Click to collapse
That's from my other post that someone else asked
Glad CDMA is getting a little more attention. Keep us updated I cannot wait for everything to start working!
I guess you'll need me to test the data fix before you have substantial evidence or has someone else tried it & failed?
CrimsonKnight13 said:
I guess you'll need me to test the data fix before you have substantial evidence or has someone else tried it & failed?
Click to expand...
Click to collapse
There currently is no data fix.
Someone tried APN Settings, but it did not help.
I have tried and failed :/
jcsnider said:
I have tried and failed :/
Click to expand...
Click to collapse
Can you provide more info?
I am the one who has tried APN settings that you mentioned. I am no expert by any means but here is my post (you have replied).
http://forum.xda-developers.com/showpost.php?p=24209771&postcount=138
Let me know if you need anything and I will do my best to help. I know how to flash and such. My past experience with roms/kernels is simply CM7 & CM9 from FreeXperia which I have been using for quite awhile now.
Is there a gapps I need to flash?
jgregoryj1 said:
Is there a gapps I need to flash?
Click to expand...
Click to collapse
Gapps will need to be flashed.
Leraeniesh said:
Gapps will need to be flashed.
Click to expand...
Click to collapse
Thank you.. just flashed gapps and booting it now...
---------- Post added at 03:50 AM ---------- Previous post was at 03:45 AM ----------
hmmm... no face unlock? It
says locked out by administrator... any way to over ride this and set up face unlock
---------- Post added at 04:01 AM ---------- Previous post was at 03:50 AM ----------
Also I flashed the root in recovery and it says I do not have root... am I the only one? Or is this confirmed on others?
jgregoryj1 said:
Thank you.. just flashed gapps and booting it now...
---------- Post added at 03:50 AM ---------- Previous post was at 03:45 AM ----------
hmmm... no face unlock? It
says locked out by administrator... any way to over ride this and set up face unlock
---------- Post added at 04:01 AM ---------- Previous post was at 03:50 AM ----------
Also I flashed the root in recovery and it says I do not have root... am I the only one? Or is this confirmed on others?
Click to expand...
Click to collapse
Is superuser showing in app drawer?
Sent from R800x
Leraeniesh said:
Is superuser showing in app drawer?
Sent from R800x
Click to expand...
Click to collapse
Yes SU is in the app drawer, but using root explorer and going into system folder and attempting to R/O does nothing.. it remains on R/W.....
Side note.... this is super fast... and snazzy looking too.. Any thoughts on the FaceUnlock thing? Love to get that going....
ShadowGun will not start a game... loads main menu just fine but beyond that, loading a new game or starting a previouis one bumps it to the home screen and resets the wallpaper
---------- Post added at 04:32 AM ---------- Previous post was at 04:08 AM ----------
SahdowGun: Loads but closes when attempting to load a game.
Dead Space: Loads, video stutter on opening video. plays as awesome as ever.
Will try the following games and report:
MC3
Asphalt 6 - Loads, then lags and controls stop working... major graphical glitches
XDA----to me its a game...
Under the settings there is nice option for Developers and one of the things listed is GPU Rendering...
I think I'll wait until data & sms are working.
Just curious... does this Beta ICS rom have the latest Adreno drivers flashed? Should I attempt to flash the updated drivers? Thinking about giviing it a shot.
Flashed the adreno drivers update.zip and......... wait for it......wait for it....... still some issues ith Asphalt 6 but overall much better.... still some hiccups but vastly lessend..
lemme look into it tomorrow...
So im confused how is the calling working?
If that guy says that calls fail etc..?
Is it me ?
EVERYTIME
com.android.phone
pops up and doesn't show call. it just calls with no screen or anything?
wth did i do wrong?
FPlusPS3 said:
Is it me ?
EVERYTIME
com.android.phone
pops up and doesn't show call. it just calls with no screen or anything?
wth did i do wrong?
Click to expand...
Click to collapse
I can't even figure out how to get it installed to begin with. I'm guessing it's because I don't have the right FW to begin with, but how are other people with the R800x doing it then?
OK, thanks to FPlusPS3, I figured out what I was doing wrong and got it loaded. I also get the com.android.phone thing over and over. I activated by using *22899, and I was able to make a call, but it did this weird echo feedback thing and then was unresponsive to calling after that until I rebooted.
Let's just say, not quite ready to be a daily driver! BUT It's early days! I know this is going to be awesome given time.
Thanks for posting it up, guys!
The fastest/stable AOKP Jelly Bean v2.1
For donations, PayPal couldn't receive donations to India, use "Send payment" service from PayPal
AOKP 4.1.2 is the Fastest, Stable and Smooth ROM for Nexus One with all the AOKP features working as per the AOKP Milestone1 build
Use MX player to play videos and select software decoder in options.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hboot : 250 MB system (Try 220 MB System it should work)
Existing issues/problems:
Since it is Evervol base expect issues as in Evervolv.
Note: Please do not make mirrors of download link.
Download link
Version 2.1:
Download here
Gapps
Download here
Tethering to work
Download here
Flash GApps as soon you flash ROM
Install any market updates before anything else.
Run A2SD script using Terminal Emulator (Y|N|Y).
Thanks to:
AOKP.co team (https://github.com/aokp)
Evervolv team for base rom (https://github.com/Evervolv)
Changelog:
Version 2.1
Build AOKP with AOKP Milestone 1
Build Evervolv latest Nightly
Runs smooth and stable...
.
Reserved...............
im going to check.im report about it,nice work man!!!!!!!!
---------- Post added at 04:20 PM ---------- Previous post was at 03:36 PM ----------
elartista3390 said:
im going to check.im report about it,nice work man!!!!!!!!
Click to expand...
Click to collapse
rom flash ok,this rom booting up,nice works im testing and reporting!!!!!
---------- Post added at 04:48 PM ---------- Previous post was at 04:20 PM ----------
elartista3390 said:
im going to check.im report about it,nice work man!!!!!!!!
---------- Post added at 04:20 PM ---------- Previous post was at 03:36 PM ----------
rom flash ok,this rom booting up,nice works im testing and reporting!!!!!
Click to expand...
Click to collapse
rom faster i test with 250/10/178 but this rom should work 220/8/208
thank you so much!
lcd density
If i set density to 160 (preset is 240) after reboot i get black screen, seams to turn one as device but the screen is black/off. I had to reflash rom and never touch density settings again. With out lower density i can't enable dual panel (witch seams to work ok) because everything is so BIG..
kallianas said:
If i set density to 160 (preset is 240) after reboot i get black screen, seams to turn one as device but the screen is black/off. I had to reflash rom and never touch density settings again. With out lower density i can't enable dual panel (witch seams to work ok) because everything is so BIG..
Click to expand...
Click to collapse
Those for tabs, if you want such settings you should try PA.
Provide me logcat for issues.
Sent from my HTC Desire using xda premium
Sorry for my english
a2sd not work -
"/sd-ext not mounted properly, it might have errors
Found block device: /dev/block/mmcblk0p2 ......"
Sd-ext formated
Multik900 said:
Sorry for my english
a2sd not work -
"/sd-ext not mounted properly, it might have errors
Found block device: /dev/block/mmcblk0p2 ......"
Sd-ext formated
Click to expand...
Click to collapse
on mine seams to work fine.
with ext4 1GB and dalvik and data/data moved on
i install it just after 1st boot and restore 30+ apps from Titanium which 15 of them successfully updated from market
---------- Post added at 06:19 PM ---------- Previous post was at 06:11 PM ----------
vijendrahs said:
Those for tabs, if you want such settings you should try PA.
Provide me logcat for issues.
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
can you make it work on phones too??
i really like aokp features and PA missing a lot of them, plus PA for N1 is stuck at v. 1.992
i will provide logcat later, first i need to backup..
oh, and an other thing i notice, overclock changes not saved after reboot (with set on boot enabled)
ever consider porting MIUI JB to nexus one? I had MIUI ICS on my previous phone and i miss it dearly
edit: nvm i see it lol
-DarkKnight- said:
ever consider porting MIUI JB to nexus one? I had MIUI ICS on my previous phone and i miss it dearly
Click to expand...
Click to collapse
Have you checked out www.miui.us
They do have miui jb.
Sent from my Nexus One using xda premium
meechto said:
Have you checked out www.miui.us
They do have miui jb.
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
Thanks! I didnt know miui.us has a JB build for N1!
I can tell the CPU in N1 trying very hard when it runs multiple modern apps at once (eg, Google Map + Nav) , response are always slow, but just have to wait and it will eventually load. I switched back to my N1 because my Gnex is in factory repairing after 4 months of use. I was quite impress N1 is still kind of capable to run JB! Too sad I dont think any modern phone has the quality in N1 anymore, which served me for almost 3 years with constant rom update!
Thanks for the hard work of all the developer!:good:
Testing this Rom.
Until now, single detected bug is delay to unlock screen.
Good Job!
74C said:
Testing this Rom.
Until now, single detected bug is delay to unlock screen.
Good Job!
Click to expand...
Click to collapse
Did you figure it out how to fix the delay? The CM10 Rom does not have this issue.
Thanks!
After installing a2sd I am having a lot of "sleeps of death". I have set up it with app and app data in sd-ext and dalvik in internal, as always. Is that correct?
I have a probleeeem!! It is an old one I guess, but it is really severe in my case.
During a phone call people an the other line can NOT hear me. I hear them fine but they don`t. And it is like this for a day now.
Do you have a solution? Please heeeeelp, I need my phone to work. It is important.
I really hope someone has a solution for this!
Same thing on CM10.
Whaaat is gooing ooon?
Really need help with this!
Please use this thread instead of the developer's thread for questions.
Anybody who has downloaded the latest build?
Can this be used as a daily driver? How's the performance
(I have bandwith restrictions, I am presently using the first build of cm 12.1)
Hi Anyone using 12.1
Just a few Qstions
1: Does the dialer lag gone
2:Memory Leak
3:does both sims works now
4: can i use this as a dialy driver
5:What about Performance
the 5.1 gapps link is down, can we still use the older one with no problems???
Phantom410 said:
the 5.1 gapps link is down, can we still use the older one with no problems???
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3066349
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can try it here
•Hit a thanks if I helped or bringed you a smile somehow!
Which Build i Should install Ace312 or Scritch007 and Percy_g2?
sagnik9 said:
Anybody who has downloaded the latest build?
Can this be used as a daily driver? How's the performance
(I have bandwith restrictions, I am presently using the first build of cm 12.1)
Click to expand...
Click to collapse
there are some bugs like contacts FC and if you put the sim in sim one slot it also FC so it is not stable to use daily atleast till it doesnt come in BETA :good:
---------- Post added at 07:20 AM ---------- Previous post was at 07:16 AM ----------
vinay001 said:
Hi Anyone using 12.1
Just a few Qstions
1: Does the dialer lag gone
2:Memory Leak
3:does both sims works now
4: can i use this as a dialy driver
5:What about Performance
Click to expand...
Click to collapse
the dialer lag is gone for me atleast
no memory leak
both sims dont work in indian version xt 1022
according to your usage you can try using it see if it is okay because the performance is smooth and is fast
it is worth giving a try cuz the ROM is great and except some bugs it runs fast
---------- Post added at 07:24 AM ---------- Previous post was at 07:20 AM ----------
Phantom410 said:
the 5.1 gapps link is down, can we still use the older one with no problems???
Click to expand...
Click to collapse
i am using gapps-lp-20150222-signed.zip and they working great
---------- Post added at 07:33 AM ---------- Previous post was at 07:24 AM ----------
please try and fix contacts and mobile network because then it can be used daily.
thanx for making this ROM because where people cant get 5.0.2 you already on 5.1
great work :good::good:
Has anyone tried gesture typing (AOSP keyboard)on CM12.1. On my device not working. I'll provide logcat soon
---------------------------
logcat attached
-------------------------------
solved the issue here
http://forum.xda-developers.com/showpost.php?p=59774616&postcount=83
Flashed 30th build
1: After Flashing First time it was not booting(Boot Loop) after restart worked
2: Setup Wizard FC
3: Some times Message has stopped working error and one times Music also FC
4: Ram Usage is little bit high than previous version(CM 12)
Will report other bugs soon , performance wise it's good Thanks @scritch007 and @percy_g2
Okay, I still cant attach logcats but the package installer isnt crashing anymore for me (30th build) but the default messaging app crashes whenever I get a message, solved by installing another messaging app like google's one (If someone can test this and send logcat would be great!)
mepsilon2 said:
Has anyone tried gesture typing (AOSP keyboard)on CM12.1. On my device not working. I'll provide logcat soon
---------------------------
logcat attached
-------------------------------
solved the issue here
http://forum.xda-developers.com/showpost.php?p=59774616&postcount=83
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=59774233
Edit-Sorry didn't looked upon last of your words,sorry for spam done.
•Hit a thanks if I helped or bringed you a smile somehow!
sagnik9 said:
Anybody who has downloaded the latest build?
Can this be used as a daily driver? How's the performance
(I have bandwith restrictions, I am presently using the first build of cm 12.1)
Click to expand...
Click to collapse
vinay001 said:
Hi Anyone using 12.1
Just a few Qstions
1: Does the dialer lag gone
2:Memory Leak
3:does both sims works now
4: can i use this as a dialy driver
5:What about Performance
Click to expand...
Click to collapse
The only bug I faced with 30-03 build was random contacts FC, but I can open now Non-Email contacts, no lag in dialer, good performance, and good multitasking so, yes its usable for daily driver
SMS Working...?
Am facing problem with sending and receiving SMS any guys facing this issue..???
Not working properly default messaging shows error" Messaging has stopped working" and i can't receive msgs too so i switched default messaging app to hangouts working...
Google messenger can receive msgs but can't send when we type something and sent nothing shows ...
I was wondering, when you expand the volume menu you get your other volume sliders with a ringer icon on the far right, what is this for and what is supposed to happen when you touch it?
Didn't work at all. Stuck in a neverending boot logo.
Tried with and whitout gapps a couple of time, but nothing.
Help?
is the mobile network issue solved cuz i need that for internet??? thank you!!
---------- Post added at 07:37 PM ---------- Previous post was at 07:34 PM ----------
twilightorange said:
Didn't work at all. Stuck in a neverending boot logo.
Tried with and whitout gapps a couple of time, but nothing.
Help?
Click to expand...
Click to collapse
just put your sim into sim two and try and flash it after wiping everything.
it takes 10-15 min for first boot so gotta have patient.
sagnik9 said:
Yes, it can be.
use the Q&A maybe?
Click to expand...
Click to collapse
Thanks for pointing out the QA thread.. well, I asked this question because many users are posting that they've got stuck in a bootloop using TWRP 2.8.5.0. Just check the last 2 pages. Are you sure?
Ish4 said:
just put your sim into sim two and try and flash it after wiping everything.
it takes 10-15 min for first boot so gotta have patient.
Click to expand...
Click to collapse
I'm using single sim. Is putting the sim in sim2 slot necessary to avoid bootloop?
currently what are the bugs in this rom?
stockuser said:
Thanks for pointing out the QA thread.. well, I asked this question because many users are posting that they've got stuck in a bootloop using TWRP 2.8.5.0. Just check the last 2 pages. Are you sure?
I'm using single sim. Is putting the sim in sim2 slot necessary to avoid bootloop?
Click to expand...
Click to collapse
no, that has been fixed, you can use the first sim slot itself
Hit Thanks if that was helpful
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CM 13 SuperEvil Rom 1.0
Features:-
1.All Stock CM Apps Replaced .
2. New Kernel.
3.Added Xperia Framework And Apps.
(Full Xperia Apps Support From Play Store)
4.Various Others Mod
*Find Out Yourself*
5.Jio Working.
6.Google Assistant MOD
(Without Xposed And Build.prop Editing)
{ Just Don't update the Google App }
BUGS : Haven't Found Any You tell me
Install Installation
Always Make A BACKUP
Reboot recovery
Full wipe (data,system,cache dalvik)
Install Rom
Done reboot
Complete The First Boot Setup
After Succesful Setup,Reboot Back to Recovery
And Flash The Patch
THIS STEP IS MOST IMPORTANT
OtherWise
YOU WILL FACE REBOOT WHILE CALLING.
Then Don't Blame ME ..!
AFTER COMPLETE SETUP GO TO SETTINGS>APPS>CLICK ON THE SETTINGS ICON >
IN PHONE SELECT DIALER AS DEFAULT
Credits :
SuperEvil
Cheskin
Ninad Patil
Links In Third Post
Press The Thanks Button If You Liked The ROM
RESERVED
LINKS
Links:-
1. SuperEvil ROM 1.0
2. Flash The Patch
Hi! I am from Austria. 3at only works 2g. I flash universal 3g 4g zip. It is recognized but not a mobile connection. Thanks for your effort!
For Mobile Connection Set correct apn in Settings.
And for me Its woring without 3G/4G patch Just Select Right Network Mode
Thanks mate! I found it. I configured APN correctly. The configuration was wrong. Now mobile data works flawlessly. Great work! :good:
To date, your CM13 is the best. Congratulations! Many thanks.
varadinum said:
Thanks mate! I found it. I configured APN correctly. The configuration was wrong. Now mobile data works flawlessly. Great work! :good:
To date, your CM13 is the best. Congratulations! Many thanks.
Click to expand...
Click to collapse
Thank You .
For Your Honest Review
Really it meant a lot for me
Hello, this ROM is also compatible with the model K3 Note K50-T3s or International K50-A40?
Thank you very much!
Internal storage problem
how to solve this problem? internal storage not found..
ALL your efforts fantastic but its a main bug please clarify it
pickandrew said:
Hello, this ROM is also compatible with the model K3 Note K50-T3s or International K50-A40?
Thank you very much!
Click to expand...
Click to collapse
Compatible with both models. All ROMs are cross compatible with both devices since they're both the same hardware with different names...
---------- Post added at 05:00 AM ---------- Previous post was at 04:55 AM ----------
Thanks for the effort.
The link for the ROM is broken... The patch link works fine though.
Lord AJ said:
Compatible with both models. All ROMs are cross compatible with both devices since they're both the same hardware with different names...
---------- Post added at 05:00 AM ---------- Previous post was at 04:55 AM ----------
Thanks for the effort.
The link for the ROM is broken... The patch link works fine though.
Click to expand...
Click to collapse
Thanks For reporting
Now link is fixed
Is switching off simcard feature present on this rom?
Please enable dual sim settings like switching off one sim in this rom and include supersu app. The rom is very smooth and better than those stock roms.
Has this ROM Internal Storage Bug? I've tried a lot of roms that are installing patching existing system image and all of them have this bug. This bug causes camera malfunction.
Is signal strength acceptable? In my actual ROM (based on CM13) this in one of the problems. Signal is very poor.
Thank you
any way to enable volte too bro ?
Lord AJ said:
Compatible with both models. All ROMs are cross compatible with both devices since they're both the same hardware with different names...
---------- Post added at 05:00 AM ---------- Previous post was at 04:55 AM ----------
Thanks for the effort.
The link for the ROM is broken... The patch link works fine though.
Click to expand...
Click to collapse
works for lenovo k50-t5??????????????????????????????????????
paipranav said:
works for lenovo k50-t5??????????????????????????????????????
Click to expand...
Click to collapse
Yes it does. Works for both K50-T5 and K50a40.
Hi! First of all @SuperEvil like to thank you for this rom!
Freshly clean installed the rom&patch as described and later flashed GSandeep's Ultimate kernel for CM. Everythings fine since install, later i'll tell more about it when tested.
My question is is that normal that when i longpress the menu key nothing's happen? In MM when you press menu key that brings up the recents and the long press brings the menu window, but for me not.
Could you help me please?
Other thing:
For those who faced internal storage not found bug. I read somewhere that if came from Lollipop first install the official or for example Cuoco92's Marshmallow rom and then install a CM13 rom.
I came from marshmallow and internal storage is OK.
Edit: Installed 1.0 but now found 2.0 on needrom. I'll be back.
3g Not showing.Internal storage problem
3g Not showing.Internal storage problem.Any solution please??
It reboots even after Flashing the patch
Otherwise this ROM is better than stock update
Everything is smooth and fine
Someone please help for this problem ???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
[COLOR="DarkOrange"][SIZE="3"]* This ROM is made for Only S6 and S6 Edge!
* Flash it at your own Risk!
* Your warranty is VOID Knox flags 0x1
* I'm not responsible for damage to Any dead equipment or loss of warranty![/SIZE][/COLOR]
Description
Based on official Samsung Galaxy Note FE Nougat Firmware with January Security Patch
Deodexed,Zipaligned
Busybox by @osm0sis
Sqlite Script
İnsane Smoothness
Great Gaming Performance
Good Battery Life
Highly debloated
Mobile Data İn Power Menu
5 Way Reboot Menu
Outdoor Mode In Settings
Fingerprint After Reboot
Face Unlock
Spam Proctection For Calls (Smart Call Provider)
Applock
Floating Messages
Dual Messenger
Fast bootanimation
Performance mode enabled
Screen recorder enabled in notification panel
Aroma İnstaller Support
Supersu And Magisk İn Aroma
Debloat Options İn Aroma
1120+ Font And Light Font Package Selections
More Than 5 Emoji Option Available İn Aroma
Bugs
WiFi-Direct
Soft Reboot At First Boot
How To İnstall ?
1. Flash Rom
2.Reboot Your Device And Enjoy Rom
Download LinksUltimate Nougat Note FE Port RC1.0
User Support
Ultimate Nougat Telegram Group
Credits
@AntonioMartitos for helping me always
@bunty_parona for his helps
@enesuzun2002 me for rom
This rom looks good ! Can you post screenshots ?
Nice work bro
looks cool, I'm gonna try!
Link is not working
Sent from my SM-G950F using XDA-Developers Legacy app
Downloading bro... screen shots please
psiva2016 said:
Downloading bro... screen shots please
Click to expand...
Click to collapse
If you are downloading it, you will install it soon so yoi dont need screenshots
adroid process acore keeps stopping
Can I flash over prior Ultimate Nougat ROM without wiping phone?
---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------
xdaer2014 said:
Link is not working
Sent from my SM-G950F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I had to click on the logo of the google drive folder and then the file downloaded
Going well so far...
The gallery issue I mentioned before was my fault.
I did a dirty flash and also restored my apps with previous system data from the old rom I had installed before...DOH:///
I backed up apps and app data only with Titanium Backup Pro and reflashed the rom as a soft clean flash.
Restored the apps and now all is good.
I am very happy with the rom so far...
Well done to dev Enes...
midgo12 said:
Going well so far...
Only issue I have is not being able to use the Gallery app.
Nothing is showing...
Not even any pictures I take even though camera says they are there after taken...
I have to use another app to be able to see my photo's and video's.
I have forced stop the app and cleared data and cache but still no go...
Click to expand...
Click to collapse
Did you check whether Gallery app has permissions to access your Storage?
Just asking. I have not tried this ROM yet because I am using GearVR and unsure whether this ROM will support.
usju said:
Did you check whether Gallery app has permissions to access your Storage?
Just asking. I have not tried this ROM yet because I am using GearVR and unsure whether this ROM will support.
Click to expand...
Click to collapse
I edited my previous post with the story so far.
Thanks for your reply.
All is good now...
Secret mode on internet doesnt work
Good job ?
Anyone having problems with phones?
I dirty flashed and have no audio volume
Badger51 said:
Anyone having problems with phones?
I dirty flashed and have no audio volume
Click to expand...
Click to collapse
Do a clean flash. What did you flash on top of?
Really love this ROM! Battery not the best, maybe just a tad worse than any of the stock ROMs, but better than most port and custom ROMs that I've tried. For the most part, it's super stable. Only annoyance is the stupid Verizon popup that happens every once in a while, which I just dismiss and worry about it.
Rom good, but I have one thing to be LTE and not 4G.
djscopesofm said:
Really love this ROM! Battery not the best, maybe just a tad worse than any of the stock ROMs, but better than most port and custom ROMs that I've tried. For the most part, it's super stable. Only annoyance is the stupid Verizon popup that happens every once in a while, which I just dismiss and worry about it.
Click to expand...
Click to collapse
Battery not the best? How so?
I'm getting around 15h of it and 4h sot more or less.
jcolongo said:
Do a clean flash. What did you flash on top of?
Click to expand...
Click to collapse
I had dirty flashed from Ultimate ROM 7.0.
I did a clean flash last night and reinstalled my apps, however, I still don't have sound when I make a call.
Any ideas?
Sent from my SM-N935F using Tapatalk
---------- Post added at 10:06 AM ---------- Previous post was at 10:03 AM ----------
I am having trouble with Smart Switch completing a back up of my phone after installing this ROM.
I believe it's a newer version of the app.
It connects with my device but won't complete a backup.
Any one else having trouble?
Sent from my SM-N935F using Tapatalk