I flashed resurrection remix oreo rom on my Redmi Note 3. Now when I restarted the phone, its showing below alert
a vendor image mismatch has been detected. Typically this means your vendor image is out of date. Please ensure your vendor image matches MMB29M
Though the phone is booting up, I am not sure what this mismatch means. Somebody can help on this ?
dex2601 said:
I flashed resurrection remix oreo rom on my Redmi Note 3. Now when I restarted the phone, its showing below alert
a vendor image mismatch has been detected. Typically this means your vendor image is out of date. Please ensure your vendor image matches MMB29M
Though the phone is booting up, I am not sure what this mismatch means. Somebody can help on this ?
Click to expand...
Click to collapse
You would need to flash the Vendor.img via Fastboot again to get rid of that Message.
Related
New to Nexus 9 and just wondered if the Vendor img has to match the ROM? Do you need to flat the corresponding bootloader image.
I ask because I recently flashed the latest vendor but got the vendor warning until I flashed the previous vendor.
I thought as long as I am on the latest vendor I could load any M rom.
Hi,
I've been out the custom rom game since Lollipop and feel very much like a N00b again.
I flashed the latest stable PIE miui through TWRP then flashed a few custom roms to test. Got hit with the whole encryption merry go round and managed to somehow stop this by flashing one of these disableencrypt zips I believe. I have no idea if this will happen again and I am scared my internal data will get encrypted again. how do I permanently disable this?
I also have the following error what have i done wrong, do i need to fix this and what effect does it have on my Poco:
ANDROID SYSTEM
Your vendor image does not match the system. Please flash the PKQ1.180729.001 vendor image for your device.
Any guidance would be much appreciated,=.
gmengass said:
Hi,
I've been out the custom rom game since Lollipop and feel very much like a N00b again.
I flashed the latest stable PIE miui through TWRP then flashed a few custom roms to test. Got hit with the whole encryption merry go round and managed to somehow stop this by flashing one of these disableencrypt zips I believe. I have no idea if this will happen again and I am scared my internal data will get encrypted again. how do I permanently disable this?
I also have the following error what have i done wrong, do i need to fix this and what effect does it have on my Poco:
ANDROID SYSTEM
Your vendor image does not match the system. Please flash the PKQ1.180729.001 vendor image for your device.
Any guidance would be much appreciated,=.
Click to expand...
Click to collapse
1- First of all encryption is by default in pie so you have to flash DfE every time you update or install a ROM and also in case of updating vendor or firmware . DfE has to installed after the ROM installation otherwise storage will get encrypted and only option would be left for decryption is format
2- For vendor mismatch flash vendor for here
https://downloads.akhilnarang.me/MIUI/beryllium/
prabh98 said:
1- First of all encryption is by default in pie so you have to flash DfE every time you update or install a ROM and also in case of updating vendor or firmware . DfE has to installed after the ROM installation otherwise storage will get encrypted and only option would be left for decryption is format
2- For vendor mismatch flash vendor for here
https://downloads.akhilnarang.me/MIUI/beryllium/
Click to expand...
Click to collapse
thanks for the information,
1. Do I still have to flash Dfe every time I do an OTA update on custom roms?
2. What affect does the vendor mismatch have? will this format my data?
gmengass said:
thanks for the information,
1. Do I still have to flash Dfe every time I do an OTA update on custom roms?
2. What affect does the vendor mismatch have? will this format my data?
Click to expand...
Click to collapse
1- yes
2- no
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
The goal of this ROM is to experience ColorOS 6.0 on any non-oppo and non-realme phone.
For a list of treble supported devices, consult and fill https://github.com/phhusson/treble_experimentations/wiki
How to flash:
1- Flash a treble pie rom (CAF vendor recommended.)
2- Extract 7z file and flash system.img
3- If base rom isn't permissive flash permissiver.
4- Reboot
Bugs:
- Fingerprint
- Since it's oem port maybe more on your device. But common bug is Fingerprint.
Download:
system.img for A-A/B ARM64 devices
Telegram Account: MacTavishAO In case of any problem please send me logs.
Thanks to: @erfanoabdi for everything..
Reserved. You can follow me on github.
Changelog:
1.0: Initial release.
Does it include stock sounds and ringtones? Thanks
ZoiraP said:
Does it include stock sounds and ringtones? Thanks
Click to expand...
Click to collapse
yes
Nice work.
Keep it up.
After reebot after flashing system, back to recovery. Any solution? Device Nubia Z17 (NX563J)
surfer30 said:
After reebot after flashing system, back to recovery. Any solution? Device Nubia Z17 (NX563J)
Click to expand...
Click to collapse
You need pie treble vendor, permissiver.
I flashed over Lineage 16GSI (android 9). But not flashed permissiver - you sugested tryed once more?
Kanka Lenovo Z5 direk crash diag bölümüne atıyor dediklerini harfiyen yaptığım halde.
Lenovo Z5(L78011) didnt work.
Stuck on boot logo. My Vendor is CAF and flashed permissiver V2
Couldn't flash in nokia 6.1 plus
Image file size larger than target device eror in twrp ..
Plz solve my problem..:crying:
Either bootloops or doesn't get past the boot image on Note9 N960F no matter what. (Different kernels, flash on different systems etc.)
rahul387 said:
Image file size larger than target device eror in twrp ..
Plz solve my problem..:crying:
Click to expand...
Click to collapse
That isnt how it works
Some random said:
That isnt how it works
Click to expand...
Click to collapse
When i flash color os in my nokia 6.1 plus .. its showing me that the image file is bigger than target device!!
Any solution for me ..?
I have 2 questions :
1) Can I flash this ROM on Mi Max 2 with Orange Fox 10 recovery?
2) Can this be used for daily life usage?
Thank you
No boot
System partition smaller than image
rahul387 said:
When i flash color os in my nokia 6.1 plus .. its showing me that the image file is bigger than target device!!
Any solution for me ..?
Click to expand...
Click to collapse
I read that we have to resize the system partition when that error occurs. It's too advanced for me so I left it.
Kicked into fastboot
I've tried installing it exactly as described here and also how it's described for other pie GSIs for oneplus5t but I only get kicked into the fastboot mode. I really like to try out this rom on an amoled display. Any specific methods I should follow? (I used mokee phh treble vendor as that was recommended in most forums, am also decrypted..maybe i have to try by flashing noverity too) all gsi tutorials and pages for oneplus 5t are about a year old so i'm not sure I can follow that and succeed. Any help would be appreciated. Thanks.
I cant install in redmi 6a
Galaxy A3 2017? (a3y17lte)
I have discovered a thread of the project treble port, how to fix stuck on boot screen?
I've been messing with root on my G965F and, after a few ROM changes a decided to return to One UI, but my camera simply doesn't work. I'de flashed the CSB3 vendor image in order to install pixel experience ROM.
At the time I did my One UI backup, but I didn't save the original vendor Image, and now I can't completely restore it. Therfor my camera refuses to function.
I've tried restoring my device using odin, but becouse I've TWRP installed it gave me an error (a very scary one), "an error has occurred while updating the device software s9+...". It prompet me to use Smart switch emergency recovery which failed to recognise my device. My solution was to flash TWRP again (Fortunately it worked, and I was back to TWRP).
I restored my one UI backup without the vendor image, and the camera still doesn't work.
If I understood this corectly, if I restore my vendor image the camera will fuction back again. But I'am open to sugestions.
Thanks
RichNoob said:
I've been messing with root on my G965F and, after a few ROM changes a decided to return to One UI, but my camera simply doesn't work. I'de flashed the CSB3 vendor image in order to install pixel experience ROM.
At the time I did my One UI backup, but I didn't save the original vendor Image, and now I can't completely restore it. Therfor my camera refuses to function.
I've tried restoring my device using odin, but becouse I've TWRP installed it gave me an error (a very scary one), "an error has occurred while updating the device software s9+...". It prompet me to use Smart switch emergency recovery which failed to recognise my device. My solution was to flash TWRP again (Fortunately it worked, and I was back to TWRP).
I restored my one UI backup without the vendor image, and the camera still doesn't work.
If I understood this corectly, if I restore my vendor image the camera will fuction back again. But I'am open to sugestions.
Thanks
Click to expand...
Click to collapse
Simply, copy your data and download the official pie from samfirm or where you want and flash it with the latest odin.. have a thread about latest pie for s9 plus you can chek it..
forkatar12 said:
Simply, copy your data and download the official pie from samfirm or where you want and flash it with the latest odin.. have a thread about latest pie for s9 plus you can chek it..
Click to expand...
Click to collapse
I already tried that. But when I attempt to flash it using odin it gives me an error on my phone "SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4 BINARY: 3".
I might be wrong, but to my understanding from your last post you tried to install an original firmware image with bootloader v3 while your phone already has a bootloader v4. If I understand everything correctly you need to use a firmware version (for your region) containing a bootloader v4 for it to install correctly - otherwise it won't install since bootloaders aren't backwards compatible.
I installed the pixel experience rom a while back but never flashed vendor and firmware or whatever it is called. Now i wanna switch to Lineage because this non OTA is annoying. Do i have to flash vendor first or can i just install Lineage? I've read a couple of times that it is bad to make a new install without vendor but never an explanation why. I've also read that i shouldn't install the wrong version of vendor but i couldn't find which one is the one i need, so i just didn't update for a while and left everything like it is.
Thanks for help
PE filesize is 1.3gb, most probably it seems like PE has vendor image embeded! and LOS also comes with vendor image!
if pe was working fine with you! you can clean flash LOS without flashing vendor image!
however always take backup!
vendor image can be found at https://mirror.akhilnarang.me/MIUI/beryllium/ 9.6.27-9 is recomended!
If you want to go the LineageOS route, go to the LineageOS thread and read through it for the minimum version of the firmware file you'll need. Vendor is now embedded in the ROM so no need to install. However, you can still install the vendor/firmware file before flashing LineageOS as the vendor part will be overwritten. Don't forget to do a full backup before you start, better safe than sorry.
YasuHamed said:
PE filesize is 1.3gb, most probably it seems like PE has vendor image embeded! and LOS also comes with vendor image!
if pe was working fine with you! you can clean flash LOS without flashing vendor image!
however always take backup!
vendor image can be found at https://mirror.akhilnarang.me/MIUI/beryllium/ 9.6.27-9 is recomended!
Click to expand...
Click to collapse
thanks, only one thing, i have an old installation of PE without vendor embedded, is that still no risk?
guhvanoh said:
If you want to go the LineageOS route, go to the LineageOS thread and read through it for the minimum version of the firmware file you'll need. Vendor is now embedded in the ROM so no need to install. However, you can still install the vendor/firmware file before flashing LineageOS as the vendor part will be overwritten. Don't forget to do a full backup before you start, better safe than sorry.
Click to expand...
Click to collapse
Ok, i'll probably flash vendor before then. Thanks for the info!
please give me vindor image for Realme 5 Pro i have lost my vendor image...