Related
I charge my phone overnight (I also use Sleep Like A Droid). When I wake up the screen is on saying "Battery full disconnect charger".
I assume then the screen turned on when the battery reached 100%. Like I have seen during the day. I'm sure it isn't great having the screen on half the night.
Any idea on how to stop it turning the screen on when the battery is full?
Cheers, Tim.
Sent from my GT-I9100 using XDA App
My screen timeout is set to 1 minute; I leave my phone charging overnight, and when I wake up, the screen is off . When I unlock the phone, the "fully charged" message is in the notification area.
Have you got your screen timeout set to never?
Looks like it might have been Sleep Like An Droid. I disabled notifications in the app and the screen was off thus morning.
Sent from my GT-I9100 using XDA App
Woke up before my alarm the last few days. My screen was on each time showing the lock screen.
Screen time out is set to one minute, but I think Sleep Like An Droid is keeping it awake :-S
Sent from my GT-I9100 using XDA App
Hey there, I'm thinking about getting the Galaxy S II but there's on thing that keeps me from doing so.
I read that there's a notification ringing up, when the phone is fully charged. The whole program including screen to turn on, and some ring-ring and vibration. I could live with the screen turning on (if it would turn off a minute after or whatever i set as timeout...) i would simply put the phone face down, but i'm absolutely sure, that sound and vibration would wake me up at night, when i'm charging the phone...
In the user manual it says: "Silentmode:Activate the silent mode to mute all sounds except media sounds and alarm ringtones." So probably silentmode won't prevent the notification to interrupt my sleep, or does it?
Would be nice to know. Don't want to buy a phone that wakes me up every night
Thanks =)
you guys should read the front page:
http://www.xda-developers.com/android/prevent-full-charge-notification-on-sgs2/
hit Thanks if this helped.
Well, i read that and theres no solution in it =/ but thanks for taking the time =)
DeadKid_Relive said:
Well, i read that and theres no solution in it =/ but thanks for taking the time =)
Click to expand...
Click to collapse
Eh? I posted modified files that remove the notification. That portal article links to my thread...
I read this thread too and there they say: "After charging both phones using the ke2 apk, i can confirm that it still vibrates. Installed the apk, then the tweak. Then rebooted as the app advised." Which tells me that it doesn't work. Or i just don't get it. Sorry, i'm pretty new to this =/
Mute Galaxy S2 Full Battery Notification
There is a way to do it with Tasker. Takes a couple mins to set up, but it worked for me. Found it on www.galaxys2tips.com in the Tips and Tricks section.
Only prob is that between 99% charge and 100% charge phone is muted, but if you don't wanna be woken anyway, I don't see that as a disadvantage.
As read on a forum elsewhere (forgot where though)
*Rooted only*
Use ES file explorer:
1. First mount the file File System so it can be edited (through menu -> settings)
2. Browse to the root folder -system-/-media-/-audio-/-ui-
3. Rename the file TW_Battery_Caution.ogg to e.g. TW_Battery_Caution_old.ogg
This results in the full notification not being played upon a full charge, without setting switching profiles.
4. Unmount the root folder in ES File Explorer settings
So far, this has not given me any side effects (besides a good night's sleep).
SDBoss said:
As read on a forum elsewhere (forgot where though)
*Rooted only*
Use ES file explorer:
1. First mount the file File System so it can be edited (through menu -> settings)
2. Browse to the root folder -system-/-media-/-audio-/-ui-
3. Rename the file TW_Battery_Caution.ogg to e.g. TW_Battery_Caution_old.ogg
This results in the full notification not being played upon a full charge, without setting switching profiles.
4. Unmount the root folder in ES File Explorer settings
So far, this has not given me any side effects (besides a good night's sleep).
Click to expand...
Click to collapse
Just did it with Root Explorer and it worked! I use the samsung battery pack and that notification was driving me nuts!
any draw backs to this.
just did it i guess i'll find out.
hope it works
This intends to be a one stop shop for everything E4GL, including but not limited to the latest tips and tricks from the forums, battery tips, the best Android apps, ROM Reviews, and more. Big thanks to my bud Biofall who much of the batter tips are sourced from.
If you've got anything that you think should be added, PM me with the subject "E4GL Thread Add" and I'll look at it as soon as I can.
◄●Best Android Apps●►
These are some of my favorite Android apps. More to come. Make a suggestion and I'll review it!
◄●Tips and Tricks●►
[HOW TO]Sanding Top Cover to Matte Black - DIY Instructions - Not to fond of the glossy cover on the back of your EVO? Make it matte!
Screenshots - To take a screenshot, Press Power Button [HOLD] + Press Home Button, then let go of both. Upon pressing the home button, the screen will flash white.
◄●FAQs●►
What is S-OFF?
Read this: S-OFF explained - by a Developer
◄●Troubleshooting●►
My device won't turn on - Check out these tips from Sprint.
◄●EVO 4G LTE Extras●►
EVO 4G LTE Reviews - by Legendary20
◄●EVO 4G LTE Battery Tips●►
◄●All Users●►
Turn off all radios when not in use (gps, Bluetooth, wifi, data, 4g). Use a widget (default or app like Switchpro) to quickly turn them on and off. The radios draw power even if not in use. Be sure to use WiFi over 3G when you can.
Stop using live wallpapers - I love them, but they are really only good for showing off due to their battery drain.
Set your screen timeout to something that fits you - This will prevent your phone from staying on when you don’t manually turn off the screen (which you should).
Everyone has that issue where the first ten percent go the fastest.
This is due to two things. One is that these types of batteries stop charging once they get to 100% to prevent damage, and begin charging again at 90%. This means that you could potentially unplug your seemingly fully charged phone at 90% actual charge. The second is below
Use the trick described in this thread, it works.
My idea behind how often you should do it is once a month, if you flash a new ROM, or if you stop noticing the benefits.
This is the calibration technique recommended by HTC themselves. Check it out!
Make sure your phone sleeps - I'm sure you have all heard around that your phone isn't "sleeping".
This is referring to the phone's "awake" time, hence the name. When you go to menu>settings>about phone>battery, you can compare the two numbers, "up time" vs. "awake time." Generally, up time refers to the amount of time since the last reboot. The "awake time" is how long the screen has been active. The problem is, a lot of the time, due to the endless possibilities of inconsistencies between apps/ROMs/kernels/phones, the phone will not go to "sleep", drawing power proportionate to the screen being in use when it reality the phone is sitting idle.
If you compare these numbers, and they are the same, or if you note the difference, turn off the screen for a minute, then re-check and they are the same, then your phone is not sleeping.
One solution is to reboot.
Usually, SystemPanel will show an app that has gone "rouge" and is keeping your phone awake.
Uninstall applications/reinstalling them slowly, checking after every install to see what is causing it is one tedious but surefire solution.
Lastly, follow these steps that I have discovered almost always work.
Reboot phone.
Instantly upon reboot, as soon as you gain control, open up some type of monitor/taskkiller
"kill all" tasks on startup; about 5 times in quick succession should do the trick.
Turn off the screen and leave it for about five minutes.
Check the up time v. awake time and see if they are the same.
If they are, repeat steps 1-5. If they are different, you are good.
Use Juice Defender - Basically it controls your data for you to maximize life. Learn more from my review of Juice Defender.
Task killers used to be the shiz, but no longer.
Here is the ultimate, in depth, graphically assisted, explanation by the famous Fresh ROM's chef, Flipz. In short, they aren't needed (and can do more harm than good).
A good alternative is the application SystemPanel Pro. It has a free version, but I highly reccomend purchasing the paid app. It basically monitors everything going on with your phone's usage both in real time an in terms of usage history. If your battery is draining fast, it tells you what app was doing it, how much it was doing it, and allows you to stop it.
◄●Rooted Users●►
Try out custom kernels - In the Android Development section of the forums, you can see all of the different kernels being developed. These allow for all kinds of modifications like underclocking the CPU and undervolting, both of which save battery. Here is a great guide to custom kernel's by mroneeyedboh.
Use SetCPU in compliance with whatever your custom kernel allows.
This site will explain the basics of SetCPU: http://www.pokedev.com/setcpu/
-Profiles from SetCPU should usually involve these for battery life optimization:
-Screen off at the minimum clock speed for both, with the max raised on level if sluggishness is apparent
-A temperature greater than “X”
-General power related profiles that lower cpu speed at lower battery levels
◄●Notes●►
Some apps or processes begin to run at startup and keep the phone awake. These apps are not detected by things like spare parts or system panel, unless sometimes represented in the "system" process, in which case its usage will be unusually high.
This shouldn't take more than three repeats, and if it does, you need to factory reset, and slowly add apps back to see what's causing the problem.
When it comes to actually "calibrating" one's battery, there are a couple of methods floating around. The method I first learned is to charge the phone all the way, boot into recovery immediately, and "wipe battery stats". Then reboot quickly, and run your phone all the way to death without charging it, then charge it all the way without interrupting it, and you should be good to go. Do this when changing ROMs/kernels for best results.
Big thanks to Biofall for the battery tips that you see her. Thanks dude.
I'll keep this updated as often as possible. Open to all suggestions, just send me a PM.
Click to expand...
Click to collapse
the enable/disable data always isn't really an option on ICS roms, if it is, it's def not in the same place
ticklemepinks said:
the enable/disable data always isn't really an option on ICS roms, if it is, it's def not in the same place
Click to expand...
Click to collapse
Right you are. I'll update that, thanks.
I'd suggest adding v6 supercharger but that isn't as easy as somethings...
Mostly due to it changing ram settings for apps n making.it kill them in x time or at x amount
Sent from my PG86100 using xda premium
1. Battery calibration for first runtime should just be using it until the phone shuts off, then go to bootloader until it shuts off. Then do a full charge to 4.2v.
I would HIGHLY suggest putting a button combination map.
With out the removable battery you know a ton of people are gonna flip out
without knowing them
Speaking of button combinations, there's an interesting tidbit here http://insidesprintnow.wordpress.com/2012/05/10/htc-evo-4g-lte-power-on-troubleshooting-steps/
Gordon Ramsay said:
Speaking of button combinations, there's an interesting tidbit here http://insidesprintnow.wordpress.com/2012/05/10/htc-evo-4g-lte-power-on-troubleshooting-steps/
Click to expand...
Click to collapse
I guess they allow 20 seconds for user error. Thts great though we dont have to worry about all tht. Smart move on their side
Hunt3r.j2 said:
1. Battery calibration for first runtime should just be using it until the phone shuts off, then go to bootloader until it shuts off. Then do a full charge to 4.2v.
Click to expand...
Click to collapse
Occasional recalibration is good just so you have accurate percentages.
coffeehandle said:
I would HIGHLY suggest putting a button combination map.
With out the removable battery you know a ton of people are gonna flip out
without knowing them
Click to expand...
Click to collapse
Good idea. Anybody got a list of them?
Gordon Ramsay said:
Speaking of button combinations, there's an interesting tidbit here http://insidesprintnow.wordpress.com/2012/05/10/htc-evo-4g-lte-power-on-troubleshooting-steps/
Click to expand...
Click to collapse
Oh nice. I'll include that. Thanks man.
Added in Legendary20's reviews thread.
Now that most of us have gotten our phones, be sure to post up your tips and tricks to add to the OP.
Screen shots can be taken with power+vol down
Check Me Out On The Google Play Store!!!
Sent From My Half Dead HTC Evo 3D, On The Now Network From Virgin Mobile?
It says Bluetooth 4 which if that's the case wouldn't make a difference if its on or off. Also there isn't a practical way to turn off 4g and doesn't make much of a difference. Incase you wanted to add notes to the battery part.
Sent from my EVO using xda premium
Screen photos can also be taken while holding down the power button and taping the home key. The screen will blink then you get a popup screen telling you image has been saved to your image file.
Sent from my mighty EVO 4G LTE
WUESTSIDER X!
I hear 3g and voice works simultaneously cuz of the chipset... awesome
Sent from my Galaxy Nexus
Yes, you can talk and internet browse (3G) at the sametime. I confirmed it with my EVOLTE.
Sent from my mighty EVO 4G LTE
WUESTSIDER X!
Added link to regaw_leinad's post about S-OFF
1) on the Gmail app when trying to copy text you used to be able to just click on the highlighted text to copy it to clipboard, now you have to go down to the bottom left and click on the icon to do it. This is only on the Gmail app.
2) The menu button will be sorely missed. Now the menu for each app appears, depending on the app, on a different part of the screen, as opposed to having it always on the same spot.
The "Recent Apps" button is UTTERLY USELESS! With the original Evo, you used to be able to press and hold the home button and see the most recent 8 apps without having to scroll at all!! WHAT WERE THEY THINKING?? (WERE THEY THINKING?!?!)
3) The text app, and for that matter Handcent and GoSMS DO NOT show the count for the unread messages, neither on the icon, nor on the notification bar, UNLESS you actually scroll down the notifications, then you can see how many unread messages you have.
4) Gmail app used to be awesome with the original Evo. Not only did it show the total unread messages you had but also, if you marked a message as unread (even a very old message), whether you did it from the phone or even from the computer, you would get a notification as if you just got a new message! Where's that?!?!
5) Sync seems to be having its own issues as well. On the regular email app, if I set it up to sync email every 5 minutes, it takes rather about 10-15 mins for the emails to come in. Original Evo was prompt at that...
6) on the regular email app in order to be able to go to the next or previous email, one has to first click on menu and only then do you have the "next" or "previous" option, unlike on the original Evo.
7) When already on max volume and want to make sure you still are with the volume rocker, you would hear a sound with the old Evo, now you got nothing are have to actually LOOK at the screen to make sure you got it to the max.
8 ) No option to play YouTube videos out of the YouTube app when clicking on a YouTube video on the browser.
That was a given with the original Evo. Annoying as hell on the LTE.
9) You MUST use both hands when holding the phone vertically if you want to have access to the whole screen (if you're laying down or sitting back on a sofa, for example), otherwise you will be unwillingly hitting the volume rocker or needing a chiropractor for your thumb. An issue which could be avoided with a gel cover, but could have been foreseen by HTC when producing such a smooth non-grippy back to the phone.
10) Gmail and Tasks are incompatible?! I mean, what's the point??
11) The regular email app can only be accessed a limited amount of times per 15 minutes? I already got quite a few of those error messages...
12) You used to be able to choose the input method and switch keyboards by long-pressing on any field. Now you have to exit whatever application you're on and go to settings, keyboard etc. to do it.
This isn't a cellphone war between the 4G and the LTE, obviously the LTE has lots of stuff over the original Evo. I'm not here to bash the LTE, on the contrary I would love to find solutions to all (or most) of those issues.
For the time being if I have to sum it up:
I love the speed and I LOVE the battery life but, in terms of practicality, I would stick with the original Evo.
P.S. I would rather not root my phone, and would like those problems to go away, help!
Gimme your thoughts!
txtmax4 said:
1) on the Gmail app when trying to copy text you used to be able to just click on the highlighted text to copy it to clipboard, now you have to go down to the bottom left and click on the icon to do it. This is only on the Gmail app.
2) The menu button will be sorely missed. Now the menu for each app appears, depending on the app, on a different part of the screen, as opposed to having it always on the same spot.
The "Recent Apps" button is UTTERLY USELESS! With the original Evo, you used to be able to press and hold the home button and see the most recent 8 apps without having to scroll at all!! WHAT WERE THEY THINKING?? (WERE THEY THINKING?!?!)
3) The text app, and for that matter Handcent and GoSMS DO NOT show the count for the unread messages, neither on the icon, nor on the notification bar, UNLESS you actually scroll down the notifications, then you can see how many unread messages you have.
4) Gmail app used to be awesome with the original Evo. Not only did it show the total unread messages you had but also, if you marked a message as unread (even a very old message), whether you did it from the phone or even from the computer, you would get a notification as if you just got a new message! Where's that?!?!
5) Sync seems to be having its own issues as well. On the regular email app, if I set it up to sync email every 5 minutes, it takes rather about 10-15 mins for the emails to come in. Original Evo was prompt at that...
6) on the regular email app in order to be able to go to the next or previous email, one has to first click on menu and only then do you have the "next" or "previous" option, unlike on the original Evo.
7) When already on max volume and want to make sure you still are with the volume rocker, you would hear a sound with the old Evo, now you got nothing are have to actually LOOK at the screen to make sure you got it to the max.
8 ) No option to play YouTube videos out of the YouTube app when clicking on a YouTube video on the browser.
That was a given with the original Evo. Annoying as hell on the LTE.
9) You MUST use both hands when holding the phone vertically if you want to have access to the whole screen (if you're laying down or sitting back on a sofa, for example), otherwise you will be unwillingly hitting the volume rocker or needing a chiropractor for your thumb. An issue which could be avoided with a gel cover, but could have been foreseen by HTC when producing such a smooth non-grippy back to the phone.
10) Gmail and Tasks are incompatible?! I mean, what's the point??
11) The regular email app can only be accessed a limited amount of times per 15 minutes? I already got quite a few of those error messages...
12) You used to be able to choose the input method and switch keyboards by long-pressing on any field. Now you have to exit whatever application you're on and go to settings, keyboard etc. to do it.
This isn't a cellphone war between the 4G and the LTE, obviously the LTE has lots of stuff over the original Evo. I'm not here to bash the LTE, on the contrary I would love to find solutions to all (or most) of those issues.
For the time being if I have to sum it up:
I love the speed and I LOVE the battery life but, in terms of practicality, I would stick with the original Evo.
P.S. I would rather not root my phone, and would like those problems to go away, help!
Gimme your thoughts!
Click to expand...
Click to collapse
Some on the stuff like not being able to open links in the YouTube app is an apple problem, choosing diferent keyboards was something the google did on ICS(annoyed as hell too), some issues is cause of ICS and some other is sense but I could live with them
Sent from my htc_jewel using Tapatalk 2
1 note about that long rant, with the keyboard a small icon appears in your taskbar that you can pull down to change input method without having to exit the app and go to settings
Sent from my EVO using XDA
As many of you may know, for newer version of TS (at least for 4th List, May version devices), it's NOT possible to flick your wrist to show watch face since the Accelerator is DISABLED whenever screen is OFF!!!
What an oversight! A smart watch needs you to push a button to see time? What if when you are driving or have both hand full and cannot spare even a finger!?
(My Pebble, on the contrast, works great here!)
I tried to force the screen always on with watch face, it's great, except it kills my battery in around 6 hrs (airplane mode!) Not acceptable!
Thus, Here comes "Tasface". With this, you could achieve:
1. Let TS shows you time WHENEVER you LOOK at the watch! (well, actually when the watch is face up) or when you flick your wrist (You can modify this!)
2. Reduce using your button (if you have an Shortcut supported launcher like Smart Launcher 2)
DISCLAIMER: I will not be responsible if Tasface broke/brick your TS in anyway! Since Tasface is only a set of Tasker profiles/Tasks you can read everything before decide go or not! Tasface DO mess around with system files!
Pre-requests:
===============
1. Your TS must be ROOTED!
2. You need to know Tasker basics! (It's not THAT difficult to use Tasker...)
3. Tasker (Obviously)
4. Watchface by Kurt Huwig (I didn't test other watchface app. May not work with stock lock watchface) https://play.google.com/store/apps/details?id=de.huwig.watchfaces
5. Secure Settings (Required) https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin
6. Smart Launcher 2 (Optional, any Launchers supports Shortcut will work. With this you can activate Watch face without using button!) https://play.google.com/store/apps/details?id=ginlemon.flowerfree
Set-up
========
1. Have Tasker (required), Watchface (required), Secure Setting (don't forget to install system helper) and Smart Launcher 2 (Optional) installed. DO NOT IMPORT "Tasface" yet!
2. Disable your stock lock watchface: Go to Setting/Personal & Account/Security/Screen lock/None (<-- This IS IMPORTANT)
3. Launch Watchface by Kurt Huwig, than double tap on any watchface to enter setup
a. check "Keep screen on"
b. Select desired watchface from "Lockscreen face"
c. Recommended to disable all other options
4. Check if the Watchface work or not by turn off than turn on your TS by press the upper physical button. You should see the Watchface you selected shows up when screen on. Swipe to return to your launcher and launch Tasker.
5. Unrar and import Tasface into Tasker
6. Close Tasker
7. Turn off --> Turn on your TS with the upper button
8. Profit!
Notes
=======
1. When watchface is displayed:
a. Touch screen is DISABLED to avoid accidental touch.
b. Screen will be OFF after 8 seconds (you can setup your prefer time)
c. Touch screen lock is achieved by putting a transparent Tasker Scene element on top of the Watchface. A small "X" on bottom right screen is used to reactivate the touch screen. You can also push the lower right button (back) to reactive your touch screen.
2. To show watchface (after automatic screen off as Step 1)
a. Just face the watchface up. The watchface should appear for another 8 seconds
b. There maybe a 1~2 second delay. This is due to Tasker not detecting the Watchface up event. I cannot do anything about this....
c. You could change the watchface up to anything else, like "Sensor shake/Backware-Forward"
3. If you have "Smart Launcher 2" or any other launcher supports Shortcut, you can set a icon to task "Lock". With this TS will activate watchface WITHOUT touch physical button. (I heard horrible stories about broken button so want to avoid use them as much as possible!) It's normal the screen will off for 2 second than back on with watchface for 8 seconds!
4. You must wait for automatic screen off or use the "Lock" shortcut to turn off the screen! Tasface will NOT work if you turn off TS by pressing the upper right physical button. This DISABLE the accelerator as mentioned above. To reactive Tasface, just turn on TS by pressing the upper right physical button to show the watchface than wait for automatic screen off.
I wrote this primarily for myself so a there are a lot of bugs. You are free to modify it and make it better. Just let me know if you have any questions and need help or improvement here!
Thanks button is just a click away if I helped you!
Update the attached file to resolve some bugs and improve responseness
Technical stuff -- What is done here?
=================================
It's a bit technical here .... No need to read if you don't care how it works!
Since TS turns off the accelerator whenever screen off, so it's not possible to activate the screen once it's off by external conditions. (You can still set a timer to wake the screen, but it's meaningless)
Thus we need to disable the power hungry backlight while keep the screen on!
I found out that it's possible to control the backlight by doing
Code:
echo 0 > /sys/class/leds/lcd-backlight/brightness
Thus, I set up a Task profile which fires whenever Watchface is activated and TS is face up, to activate the backlight then turn off the backlight again after 8 seconds, but KEEP the TS screen wake! (Only backlight is turned off to save battery!)
Code:
echo 1 > /sys/class/leds/lcd-backlight/brightness
You can change "1" to anything from 1~255. I just found 1 bright enough for me
Since screen/system is always wake, to avoid accidental touch, a transparent Tasker Scene on top of the screen is add to disable the touch screen. A small "X" is on the bottom right to disable this transparent scene if anything goes wrong. (And it does, Tasker is laggy sometimes and too slow to remove this scene automatically!)
I also lower down the CPU cycle to the lowest possible to further saving battery. CPU returns to normal frequency when leaving watch face (into launcher, etc...)
That's all! Folks!
Reserved
Shake
I was able to use application Shake from ADL Dev (com.adl.appshaker) to switch screen on with shake/twist of wrist. You just have to enable "activate when screen off" option - and it is little battery hungry.
Of course I have version 20140513.
I also strongly suspect, that you can force sensors to work when face is off, by switching into "Sports mode" (Run Settings->SMART MODE->Sports Mode)
Piw said:
I was able to use application Shake from ADL Dev (com.adl.appshaker) to switch screen on with shake/twist of wrist. You just have to enable "activate when screen off" option - and it is little battery hungry.
Of course I have version 20140513.
I also strongly suspect, that you can force sensors to work when face is off, by switching into "Sports mode" (Run Settings->SMART MODE->Sports Mode)
Click to expand...
Click to collapse
Thanks for the advice.... I just think since I already have Tasker on my TS, I want to find a way to not to use additional SW which always runs in background to monitor things... Since its battery hungry, maybe Shake also use the same trick as me......
As for Smart mode settings, I tried bdefore but none of them work for flick wrist to wake up... Maybe I missed something?
Sent from my HTC_One_max using XDA Premium HD app
might give this a shot since shake was waking up watch at wrong times and was destroying battery life, and i already have tasker on the watch and running so hopefully that will avoid the battery loss that shake had.
lssong99 said:
As for Smart mode settings, I tried bdefore but none of them work for flick wrist to wake up... Maybe I missed something?
Click to expand...
Click to collapse
I was just guessing, because it suppose to leave GPS and accelerometer working with screen off, to enable sport trackers and pedometers.
If it works? - I haven't tested yet...
Piw said:
I was just guessing, because it suppose to leave GPS and accelerometer working with screen off, to enable sport trackers and pedometers.
If it works? - I haven't tested yet...
Click to expand...
Click to collapse
Wow! It seems you are right! The watch DOES allow sensor to work on Sport mode after screen off, but the response from Tasker become very sluggish when screen-off!
I made a simple profile to detect shake action (if shake than beep), and when screen on, the watch beep in less than one second after shake began, but when screen-off (sport mode), It took Takers 5~6 seconds of continuous shaking to detect the shake event. Not very practical for a watch solution...
With my Backlight solution, although sometimes still hiccup happens, but my feeling is about 90% of time the watchface wakeup correctly...
tasker problems
lssong99 said:
Wow! It seems you are right! The watch DOES allow sensor to work on Sport mode after screen off, but the response from Tasker become very sluggish when screen-off!
I made a simple profile to detect shake action (if shake than beep), and when screen on, the watch beep in less than one second after shake began, but when screen-off (sport mode), It took Takers 5~6 seconds of continuous shaking to detect the shake event. Not very practical for a watch solution...
With my Backlight solution, although sometimes still hiccup happens, but my feeling is about 90% of time the watchface wakeup correctly...
Click to expand...
Click to collapse
i can not import to tasker tasker do not see it
pashka79 said:
i can not import to tasker tasker do not see it
Click to expand...
Click to collapse
Do you mean the Tasker cannot see the prj file?
For how to import project, you could check http://tasker.dinglisch.net/userguide/en/faqs/faq-how.html#q
and you need to put the unrared file (.xml) in /sdcard/tasker/projects for Tasker to see it...
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
death_entry said:
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
Click to expand...
Click to collapse
Don't know for tasker but I'm using shake app from market and I even I thought it'll drain my battery very fast - it didn't...
It's almost like I don't have it...
My battery can't hold on more then 24hours but I really use my watch and it's constantly connected to wifi and BT.
Sent from my C6903 using Tapatalk
funky0308 said:
Don't know for tasker but I'm using shake app from market and I even I thought it'll drain my battery very fast - it didn't...
It's almost like I don't have it...
My battery can't hold on more then 24hours but I really use my watch and it's constantly connected to wifi and BT.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Ah that's prolly why you don't notice it running down... what do you use your watch for? Tbh i haven't used it for more than a watch lol/...
death_entry said:
Ah that's prolly why you don't notice it running down... what do you use your watch for? Tbh i haven't used it for more than a watch lol/...
Click to expand...
Click to collapse
Well as I have Z1, which is quite big, I'm using TS mainly to receive notifications (using swapplink).
I'm receiving many emails (I'm using Z1 as my business phone) so it's great that I can see on my TS subject of email and decide what will I do.
I have sim card in TS and I use it all the time, when I'm alone in a car (and that's 6 hours per day )
I found TS quite practical for companion
BTW...from today, I'm using this app to help me save my battery power on TS and Z1
http://forum.xda-developers.com/showthread.php?p=53078670
Sent from my C6903 using Tapatalk
lssong99 said:
Do you mean the Tasker cannot see the prj file?
For how to import project, you could check http://tasker.dinglisch.net/userguide/en/faqs/faq-how.html#q
and you need to put the unrared file (.xml) in /sdcard/tasker/projects for Tasker to see it...
Click to expand...
Click to collapse
I tried this and Tasker can't see the xml on my TS
Here's a workaround for those having issues seeing the xml file in Tasker
Using a file manager, navigate to the location of the xml file
"Open with.." and choose Tasker
You will then see a toast notificaiton saying "...can be opened in Tasker" (or something like that)
Open Tasker -> Preferences -> UI -> Untick "Beginner Mode"
Back to main Tasker screen
In the HOME icon (bottom left) -> Long press, and choose "Import", then look for the XML file, wherever you put it
Boom
Note: Make sure you have the correct app from the Play Store, and not from the Ostore (same app, different names)
death_entry said:
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
Click to expand...
Click to collapse
I am afraid that this will have an impact your battery. Basically to make TS responsive (light up as soon as you raise your hand), the screen/CPU is kept wake. Only LED backlight is disabled.
Although in my implement I put the CPU is slowest frequency and sleep Governor, but battery is around one day usage without radio on....
We need kernel tweak of this to achieve good battery life... Tasker is only... Tasker...
jeremy.chan said:
Here's a workaround for those having issues seeing the xml file in Tasker
Using a file manager, navigate to the location of the xml file
"Open with.." and choose Tasker
You will then see a toast notificaiton saying "...can be opened in Tasker" (or something like that)
Open Tasker -> Preferences -> UI -> Untick "Beginner Mode"
Back to main Tasker screen
In the HOME icon (bottom left) -> Long press, and choose "Import", then look for the XML file, wherever you put it
Boom
Note: Make sure you have the correct app from the Play Store, and not from the Ostore (same app, different names)
Click to expand...
Click to collapse
Thanks I see it now.
put the unzip file at that location and still Tasker cannot see it?
Hi do read the solution I provided
Tapa-ed from the Sony Z Ultra
With my Note 4, it would wake up from Android Doze, or simply not enter that state if there was movement of the phone. I felt stupid needing to pick up my phone every 10 min to give it a small shake, but at least it seemed to work. I keep my phone in my pocket when I'm working outside and that always kept the Note 4 from falling into Doze mode. Not so with the S9+. It drops into Doze even in my pocket. Anyway to stop that from happening? Like others here, I feel frustrated needing to activate my screen to find out if there are notifications.
Brokk said:
With my Note 4, it would wake up from Android Doze, or simply not enter that state if there was movement of the phone. I felt stupid needing to pick up my phone every 10 min to give it a small shake, but at least it seemed to work. I keep my phone in my pocket when I'm working outside and that always kept the Note 4 from falling into Doze mode. Not so with the S9+. It drops into Doze even in my pocket. Anyway to stop that from happening? Like others here, I feel frustrated needing to activate my screen to find out if there are notifications.
Click to expand...
Click to collapse
That's not Doze mode. Doze is when Android puts apps to sleep that are in memory not being used. This is done to save battery (and processing time?).
So what is happening here, if I understand, is that your phone display is going blank when you pull it from your pocket?
Scott said:
That's not Doze mode. Doze is when Android puts apps to sleep that are in memory not being used. This is done to save battery (and processing time?).
Click to expand...
Click to collapse
Doze was originally described as putting your phone into a power saving sleep mode after 20 min of "inactivity". The issue that caused me problems back then was not about the apps, but that notifications pushed to the device were queued up by the system until your phone "woke up", then the notifications would come rolling through. This happened at the system level regardless of app.
Perhaps in the latest version of Android they have changed the definition of Doze, but another poster was having a lot of issues with notifications (mostly email) and the culprit was deemed to be Doze.
Scott said:
So what is happening here, if I understand, is that your phone display is going blank when you pull it from your pocket?
Click to expand...
Click to collapse
No. My display is blank (as it should be) when I put it into my pocket, as well as when I pull it out. I always shut the screen off before putting my phone down, or in my pocket.
If I put my phone in my pocket, and 5-10 min later I get a notification, it comes through loud and clear and I pull my phone out and check it. If 20+ min has gone by without me having a reason to turn the screen on, then I stop getting notifications. When I pull it out to check the time or send a message, suddenly the notifications come rolling through.
Again, I was used to this if the Note 4 was put down, but this behavior is new to me if the phone is moving about.
Brokk said:
Doze was originally described as putting your phone into a power saving sleep mode after 20 min of "inactivity". The issue that caused me problems back then was not about the apps, but that notifications pushed to the device were queued up by the system until your phone "woke up", then the notifications would come rolling through. This happened at the system level regardless of app.
Perhaps in the latest version of Android they have changed the definition of Doze, but another poster was having a lot of issues with notifications (mostly email) and the culprit was deemed to be Doze.
No. My display is blank (as it should be) when I put it into my pocket, as well as when I pull it out. I always shut the screen off before putting my phone down, or in my pocket.
If I put my phone in my pocket, and 5-10 min later I get a notification, it comes through loud and clear and I pull my phone out and check it. If 20+ min has gone by without me having a reason to turn the screen on, then I stop getting notifications. When I pull it out to check the time or send a message, suddenly the notifications come rolling through.
Again, I was used to this if the Note 4 was put down, but this behavior is new to me if the phone is moving about.
Click to expand...
Click to collapse
I concur. Same happens to me.
I don't have this issue at all. I have my phone in my pocket most of the day and don't need to "wake" the phone up for notifications. I can leave my phone unattended for hour or 3 and it still receives the notifications without issues. I don't know if I have turned on a setting that mine works different, but I must say that my battery life isn't that great....as if the phone never sleeps/doze at all
termdj said:
I don't have this issue at all. I have my phone in my pocket most of the day and don't need to "wake" the phone up for notifications. I can leave my phone unattended for hour or 3 and it still receives the notifications without issues. I don't know if I have turned on a setting that mine works different, but I must say that my battery life isn't that great....as if the phone never sleeps/doze at all
Click to expand...
Click to collapse
I'm curious. Do you have any of the power saving modes turned on? Do you use "always on display"?
I never use the power save modes. Aod is on from 5 in the morning till 8 at night
termdj said:
I never use the power save modes. Aod is on from 5 in the morning till 8 at night
Click to expand...
Click to collapse
AoD could be keeping your phone awake, preventing Doze. The power saving features talks about putting apps to sleep, so unless you use them, that could also be disabling Doze. I could try changing the power saving settings, though it seems like a shame. I have zero interesting in AoD for multiple reasons, so it's not worth it for me to use that to solve my problems.
Thanks for the information!
Doze changed in Nougat, I believe, so that motion no longer prevented Doze from working. Since most men, at least, carry their phone in their pocket Doze hardly ever kicked in, greatly limiting its power saving capability.
You can exempt specific apps from Doze if you want to get notifications from them even when dozing.
Settings / Apps / 3 dot menu / special access / Optimize battery usage. Select All Apps from the drop down. Turn off the toggle for any apps you don't want to Doze.
Brokk said:
Doze was originally described as putting your phone into a power saving sleep mode after 20 min of "inactivity". The issue that caused me problems back then was not about the apps, but that notifications pushed to the device were queued up by the system until your phone "woke up", then the notifications would come rolling through. This happened at the system level regardless of app.
Perhaps in the latest version of Android they have changed the definition of Doze, but another poster was having a lot of issues with notifications (mostly email) and the culprit was deemed to be Doze.
No. My display is blank (as it should be) when I put it into my pocket, as well as when I pull it out. I always shut the screen off before putting my phone down, or in my pocket.
If I put my phone in my pocket, and 5-10 min later I get a notification, it comes through loud and clear and I pull my phone out and check it. If 20+ min has gone by without me having a reason to turn the screen on, then I stop getting notifications. When I pull it out to check the time or send a message, suddenly the notifications come rolling through.
Again, I was used to this if the Note 4 was put down, but this behavior is new to me if the phone is moving about.
Click to expand...
Click to collapse
Yes, I am confusing Doze with the Samsung power saving options. Blah!
I know the battery life will decrease with aod, but I have noticed that even without aod on my battery drop 2% per hour, so I leave it on...There are days that I can go 1 day and 8 hours before charging, but then my sot is only 2 hours....In general I'm happy with the battery life
meyerweb said:
You can exempt specific apps from Doze if you want to get notifications from them even when dozing.
Settings / Apps / 3 dot menu / special access / Optimize battery usage. Select All Apps from the drop down. Turn off the toggle for any apps you don't want to Doze.
Click to expand...
Click to collapse
Thanks!
It seems oddly redundant needing to do essentially the same thing in two places. One well advertised under the battery settings, and the other one hidden under settings/apps/special access.
Hopefully this will fix my problems. Glad to know there is a work around.
Brokk said:
Thanks!
It seems oddly redundant needing to do essentially the same thing in two places. One well advertised under the battery settings, and the other one hidden under settings/apps/special access.
Hopefully this will fix my problems. Glad to know there is a work around.
Click to expand...
Click to collapse
The two settings really are doing different things. Samsung's (in the battery settings), puts apps to sleep after 3 to 7 days (depending on your settings). The won't wake up again until you use them. Doze (the pretty much hidden option in Apps), lets the apps wake up on their own, when you start using the phone, even if you don't access those particular apps.
I'm not sure why the Doze setup is buried so deep in settings, though. I guess Google (or Samsung?) really doesn't want you interfering with it.
meyerweb said:
The two settings really are doing different things. Samsung's (in the battery settings), puts apps to sleep after 3 to 7 days (depending on your settings). The won't wake up again until you use them.
Click to expand...
Click to collapse
I made a mistake of putting an app to sleep that I use to keep my screen awake. It uses a widget to toggle it on/off, but will shut off along with the screen if you intentionally shut your screen off. After putting that app to sleep, the widget stopped working. I had to go find the actual app, start it, then quickly flip back to my home screen and click on the widget. I couldn't undo my "sleep" action on that app. I changed it to "unmonitored", so that the S9+ would never put it to sleep. I rebooted. I shut off the power saving options. Nothing worked. Everytime I would go to the widget (unless I just started the actual app), it wouldn't react to clicking on the widget.
I finally gave up and uninstalled the app from my phone. Rebooted. Reinstalled it and now it works fine. So I'm not sure I agree with "puts the app to sleep in 3 to 7 days". Maybe 3-7 minutes...
Well, 3 to 7 days is what Samsung says, and the optional range you can set in the app. Don't know what specifically happened with that widget, though.
meyerweb said:
Well, 3 to 7 days is what Samsung says, and the optional range you can set in the app. Don't know what specifically happened with that widget, though.
Click to expand...
Click to collapse
Where is the setting(s) for optimal range? I don't remember specifying that. I thought it was more of an on/off thing. White listed (unmonitored resource consumption) or black listed (never let it run in the background). Then apps in neither list it reports to you and you can force them to sleep or not.
Brokk said:
Where is the setting(s) for optimal range? I don't remember specifying that. I thought it was more of an on/off thing. White listed (unmonitored resource consumption) or black listed (never let it run in the background). Then apps in neither list it reports to you and you can force them to sleep or not.
Click to expand...
Click to collapse
Samsung does bury things....
Settings / Device maintenance, click Battery at the bottom.
Then click the 3 dot menu at the top, and Advanced Settings.
Tap App power monitor (the text, not the toggle).
Tap Put unused apps to sleep (again, the text).
You can set the slider anywhere between 3 days and 7.
I spent several days just wandering through every settings option I could find after I setup the phone. Discovered all kinds of hidden things. Sometimes I can even remember where I saw them.
I'm close to having the phone perfect but these two still persist. There is a myriad of old options for Xposed and I was wondering if anyone has had success with any of them? I use the phone for a GPS unit on a cycle with a dynamo hub, so the waking up is annoying.
I've sorted the sound already, so there are two wake up conditions:-
1. power is enabled
2. battery reaches 100%.
Cheers, Andrew
snoopy20 said:
I use the phone for a GPS unit on a cycle with a dynamo hub, so the waking up is annoying.
Click to expand...
Click to collapse
Hi Andrew,
I can't help with Xposed, but I have a suggestion and a side question.
My suggestion : try IpBike (with IpBikeKey to unlock it).
The author of IpBike reads and answers e-mails. He is opened to new features if the idea is good.
If IpBike can't force the screen off (I never tested, as I don't charge my device as I cycle !), he may add the feature.
My question : is the PVG100 ANT+ capable ?
I use a Sony-Ericsson Xperia Active as a cycle computer (powered by IpBike), with ANT+ Speed, Cadence and Heart-rate sensors.
I would like to replace it with a PVG100E/EU, but the ANT directory does not list any Palm device.
Have a nice day !
Cobus.
Probably not, ANT is an extra cost for a manufacturer.
I found an open-source app which works. It's a bit old but still it does the job.
Basically it registers itself as an admin app so it can control the screen, then when a wakeup comes in it turns the screen back off. It's quick enough that the screen doesn't get a chance to come on. No root required.
snoopy20 said:
I'm close to having the phone perfect but these two still persist. There is a myriad of old options for Xposed and I was wondering if anyone has had success with any of them? I use the phone for a GPS unit on a cycle with a dynamo hub, so the waking up is annoying.
I've sorted the sound already, so there are two wake up conditions:-
1. power is enabled
2. battery reaches 100%.
Cheers, Andrew
Click to expand...
Click to collapse
Have you tried enabling "zen mode?" Zen mode keeps everything on the phone from waking I believe. I have tried it, but got annoyed when the wifi would cut out once I turned my screen off, because it would stop what I was listening to. Not sure exactly what you're looking for, but zen mode might be something to play around with.
To activate zen mode, the easiest way is probably through the app "setedit." Under "system" options, scroll to the bottom and change zen mode from 0 to 1.