Hi everybody from Quebec city
My Bip watch is is with firmware 0.1.0.86
How could I show the record tracking on my walking on Google earth or other ?
I'm on Mac and I have a android phone to "sync" with Mi-Fit and Notify & Fitness app install
(android 5.X)
You can export the .tcx file on Notify and Fitness app, then import it into whatever mapping software you want.
How?
Seem we have many version of Notify and Fitness. What is the version I need and where do I "extract" GPS tracking ?
Thanks in advance
pinkabou said:
Seem we have many version of Notify and Fitness. What is the version I need and where do I "extract" GPS tracking ?
Thanks in advance
Click to expand...
Click to collapse
Notify and Fitness fior Amazfit
Pro version is needed to see the content of the messages.
For exporting, just open the activity in the app.
On the top right, there is a 3 dot menu
Synchr with others apps
You have 4 choices : Google fit, Export tcx, Strava or RunKeeper
Big Thanks
Kéno40 said:
Notify and Fitness fior Amazfit
Pro version is needed to see the content of the messages.
For exporting, just open the activity in the app.
On the top right, there is a 3 dot menu
Synchr with others apps
You have 4 choices : Google fit, Export tcx, Strava or RunKeeper
Click to expand...
Click to collapse
I finally be able to sync and export to my iMac and see my run on google earth app
Seem precise for the recording
I'm happy
but how I can do it on iOS?
ciopik said:
but how I can do it on iOS?
Click to expand...
Click to collapse
You sadly can´t - so I sold my iPhone X and bought an Android phone
Now I can sync any TCX file with or without GPS to Endomondo etc. or directly to Strava from Notify & Fitness and from there automatically to most other platforms through the website Tapiriik.
FREE
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Hi,
for those using Notify & Fitness. I also use this app, but I have observed a problem in the 1st km statistics when running. Strava will show between 30-40 seconds less for first km compared to what the watch shows, or what you can see in Mi Fit or Notify.
When I export activity to tcx file, I see that first tracking points, aproximately first 200-300 meters, always has same time stamp, and that is causing problems in Strava. So far I dont know if this is a problem of how Notify & Fitness export data, or is the watch that is doing it wrong, any idea?
Thanks
iPhone/ iPad supported !
Joost39/2 said:
You sadly can´t - so I sold my iPhone X and bought an Android phone
Now I can sync any TCX file with or without GPS to Endomondo etc. or directly to Strava from Notify & Fitness and from there automatically to most other platforms through the website Tapiriik.
Click to expand...
Click to collapse
Found 'AmazTools' in the Apple App store recently, and it works well on latest BIP s/w version !! Including GPX/ Strava/ loads of WatchFaces, and extra button functions. Give it a try!
Vinicius_Gonzo said:
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Click to expand...
Click to collapse
Thanks, it's still working, but I had to set in Mi Fit my Amazfit Bip as visible BT device, then pairing with Gadgetbridge was ok.
Hello @Vinicius_Gonzo & @adrianfp
Vinicius_Gonzo said:
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Click to expand...
Click to collapse
I tried GB but i had somekind of offset in GPS trace, did you experienced the same..?
adrianfp said:
Hi,
for those using Notify & Fitness. I also use this app, but I have observed a problem in the 1st km statistics when running. Strava will show between 30-40 seconds less for first km compared to what the watch shows, or what you can see in Mi Fit or Notify.
When I export activity to tcx file, I see that first tracking points, aproximately first 200-300 meters, always has same time stamp, and that is causing problems in Strava. So far I dont know if this is a problem of how Notify & Fitness export data, or is the watch that is doing it wrong, any idea?
Thanks
Click to expand...
Click to collapse
Trying N&T i get a slight difference, here are stats :
- mi fit : 3.87kms / 14min43sec
- N&T : 3.88kms / 15min03sec
- Strava : 3.87kms / 14min17sec
Haven't much other tracks, i'll try, is it alike what you experienced..?
Further informations here : https://forum.xda-developers.com/showpost.php?p=78148443&postcount=78
Thanks in advance for insight
Regards
Hello @Vinicius_Gonzo
That kind of offset : see attachment
I didn't used gpx viewer but took directly gpx file from Android/data/ee.aegrel.gadgetbridge/files
Thx
Hi,
What's the easiest way to export GPS data to a PC? I have Android phone, not iOS.
Also, how long will be battery last with GPS recording? What's the record frequency (1 pt per second, etc)? And how much data can it hold (e.g. 10 hours)?
Thanks
Hi, have you found a solution? I will only use gadgetbridge and not mi-fit (data-collector)
Hi !! Have you try to use ZEPP App for connect AMAZFIT BIT to Strava ??
Thanks for the tip, it works just fine, I have a question though: the workouts in Gadgetbridge are all off by 1 hour, so my Strava runs aren't in sync with my friend' tracks, have you met this isuue?
Hello,
is it possible to edit the GPS trail directly in Amazfit app? Yesterday, when I was running, GPS made a quick jump and added me nearly 1 km to my trail...
I can do it in Runkeeper, but I would like to have the correct values in Amazfit as well...
The same thing happened to me a couple of days ago. My Pace GPS jumped me a few km away and then got the correct position a few minutes later. In all, it added 5 km to my route.
Currently it's not possible. You can however export the activity as GPX (or use AmazeBackup to export data to GPX or TCX), edit the file and then import it manually to a third party service like Strava or Endomondo. You can check the exported file using this web app: mygpsfiles.com.
lfom said:
Currently it's not possible. You can however export the activity as GPX (or use AmazeBackup to export data to GPX or TCX), edit the file and then import it manually to a third party service like Strava or Endomondo. You can check the exported file using this web app: mygpsfiles.com.
Click to expand...
Click to collapse
Thanks, I know all this, what I miss is the possibility to import it back to Stratos...
You could edit the SQLite Database.
Look at the export thread in this forum how to get it
Hi Everybody, I was looking many threads to find solution and I have noticed many people looking for the same, but I have not found final solution, can anybody help me. Is it possible to do it, as it is with garmin or wahoo fitness where I can import heart activities without any problem.
Kind Regards
Use AmazeBackup to extract the data as TCX, when import them in the service you use. You can "semi-automate" this using AmazeBackup + DropBox + FitnessSyncer.
Hi,
I am using a Stratos 3 for 2 weeks now, and i am not completely satisfied with GPS / Strava datas.
FYI, i practice outdoor cycling (Commute, MTB, Road)
I am also using a Garmin Edge 1000 to compare datas.
I set the Stratos to Auto Sync with Strava....but i have to open the phone application to execute the sync...(Semi-auto sync finally)
And it is really strange, the auto sync datas are not what are in the watch or the application ! And of course, if i compare auto-sync datas and manual sync in Strava, i have the same issue !
Distance, Average and Max Speed, climbing, time, are not the same except HR !
In Strava i also see that the device is named Huami Amazfit Pace with auto-sync but the name is Amazfit Sports Watch.
Finally, comparing manual sync and my Garmin edge 1000 datas are a little bit different for average speed and distance but maybe it is because i have a speed sensor on the wheel connected to the Garmin. I should try without it to compare.
I am running the lastest official Rom update.
Do you think that using Paceficator firmware should resolve the problems ?
Thanks.
Hello,
Is there a Website where I can read my stratos 3 data ?
Thank you
You can sync your watch with Strava, and on Strava's website you can read the activities.
AFAIK Amazfit has no own webportal or api, only the app. STRAVA will work only for recorded activities - not for other daily metcris like steps.