Hi everybody from Quebec city
My Bip watch is is with firmware 0.1.0.86
How could I show the record tracking on my walking on Google earth or other ?
I'm on Mac and I have a android phone to "sync" with Mi-Fit and Notify & Fitness app install
(android 5.X)
You can export the .tcx file on Notify and Fitness app, then import it into whatever mapping software you want.
How?
Seem we have many version of Notify and Fitness. What is the version I need and where do I "extract" GPS tracking ?
Thanks in advance
pinkabou said:
Seem we have many version of Notify and Fitness. What is the version I need and where do I "extract" GPS tracking ?
Thanks in advance
Click to expand...
Click to collapse
Notify and Fitness fior Amazfit
Pro version is needed to see the content of the messages.
For exporting, just open the activity in the app.
On the top right, there is a 3 dot menu
Synchr with others apps
You have 4 choices : Google fit, Export tcx, Strava or RunKeeper
Big Thanks
Kéno40 said:
Notify and Fitness fior Amazfit
Pro version is needed to see the content of the messages.
For exporting, just open the activity in the app.
On the top right, there is a 3 dot menu
Synchr with others apps
You have 4 choices : Google fit, Export tcx, Strava or RunKeeper
Click to expand...
Click to collapse
I finally be able to sync and export to my iMac and see my run on google earth app
Seem precise for the recording
I'm happy
but how I can do it on iOS?
ciopik said:
but how I can do it on iOS?
Click to expand...
Click to collapse
You sadly can´t - so I sold my iPhone X and bought an Android phone
Now I can sync any TCX file with or without GPS to Endomondo etc. or directly to Strava from Notify & Fitness and from there automatically to most other platforms through the website Tapiriik.
FREE
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Hi,
for those using Notify & Fitness. I also use this app, but I have observed a problem in the 1st km statistics when running. Strava will show between 30-40 seconds less for first km compared to what the watch shows, or what you can see in Mi Fit or Notify.
When I export activity to tcx file, I see that first tracking points, aproximately first 200-300 meters, always has same time stamp, and that is causing problems in Strava. So far I dont know if this is a problem of how Notify & Fitness export data, or is the watch that is doing it wrong, any idea?
Thanks
iPhone/ iPad supported !
Joost39/2 said:
You sadly can´t - so I sold my iPhone X and bought an Android phone
Now I can sync any TCX file with or without GPS to Endomondo etc. or directly to Strava from Notify & Fitness and from there automatically to most other platforms through the website Tapiriik.
Click to expand...
Click to collapse
Found 'AmazTools' in the Apple App store recently, and it works well on latest BIP s/w version !! Including GPX/ Strava/ loads of WatchFaces, and extra button functions. Give it a try!
Vinicius_Gonzo said:
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Click to expand...
Click to collapse
Thanks, it's still working, but I had to set in Mi Fit my Amazfit Bip as visible BT device, then pairing with Gadgetbridge was ok.
Hello @Vinicius_Gonzo & @adrianfp
Vinicius_Gonzo said:
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Click to expand...
Click to collapse
I tried GB but i had somekind of offset in GPS trace, did you experienced the same..?
adrianfp said:
Hi,
for those using Notify & Fitness. I also use this app, but I have observed a problem in the 1st km statistics when running. Strava will show between 30-40 seconds less for first km compared to what the watch shows, or what you can see in Mi Fit or Notify.
When I export activity to tcx file, I see that first tracking points, aproximately first 200-300 meters, always has same time stamp, and that is causing problems in Strava. So far I dont know if this is a problem of how Notify & Fitness export data, or is the watch that is doing it wrong, any idea?
Thanks
Click to expand...
Click to collapse
Trying N&T i get a slight difference, here are stats :
- mi fit : 3.87kms / 14min43sec
- N&T : 3.88kms / 15min03sec
- Strava : 3.87kms / 14min17sec
Haven't much other tracks, i'll try, is it alike what you experienced..?
Further informations here : https://forum.xda-developers.com/showpost.php?p=78148443&postcount=78
Thanks in advance for insight
Regards
Hello @Vinicius_Gonzo
That kind of offset : see attachment
I didn't used gpx viewer but took directly gpx file from Android/data/ee.aegrel.gadgetbridge/files
Thx
Hi,
What's the easiest way to export GPS data to a PC? I have Android phone, not iOS.
Also, how long will be battery last with GPS recording? What's the record frequency (1 pt per second, etc)? And how much data can it hold (e.g. 10 hours)?
Thanks
Hi, have you found a solution? I will only use gadgetbridge and not mi-fit (data-collector)
Hi !! Have you try to use ZEPP App for connect AMAZFIT BIT to Strava ??
Thanks for the tip, it works just fine, I have a question though: the workouts in Gadgetbridge are all off by 1 hour, so my Strava runs aren't in sync with my friend' tracks, have you met this isuue?
Hello everyone
here, I have a problem of synchronization of my watchfaces.
my pace was version 1.2.50h, but I had no voice during the race so I returned in 1.2.48.
but since my watchfaces do not synchronize anymore with the application, I updated to 1.2.51, but still no synchronization with the amazfit application (2.3.0).
I can change my watchfaces from the watch, but not in the app.
only watchfaces embedded with the rom are displayed in the application.
would someone have a solution?
thank you in advance
Was toying with purchasing one of the above smartwatches, until I discovered that there is no support for the Endomondo app...
is there anyway to side-load the Endomondo app or a way to export the data from the Amazfit and then import into my Endomondo workout web page??
cheers for any insights... :good::good:
Davyg57 said:
Was toying with purchasing one of the above smartwatches, until I discovered that there is no support for the Endomondo app...
is there anyway to side-load the Endomondo app or a way to export the data from the Amazfit and then import into my Endomondo workout web page??
cheers for any insights... :good::good:
Click to expand...
Click to collapse
Yes, there is, from Stratos you can upload your sessions to STRAVA and than you can for example on fitnesssyncer.com synchronize strava with Endomondo and get your data to Endomondo. At lease running and cycling data could by also exported from Stratos to GPX file directly in watches and these files could be imported to Endomondo.
cheers bud..much appreciated ... :good::good::good:
Tentei said:
Yes, there is, from Stratos you can upload your sessions to STRAVA and than you can for example on fitnesssyncer.com synchronize strava with Endomondo and get your data to Endomondo. At lease running and cycling data could by also exported from Stratos to GPX file directly in watches and these files could be imported to Endomondo.
Click to expand...
Click to collapse
just been doing more reading up on what you said...... it appears that only activity that requires GPS can be saved/exported to/from the Amazfit Stratos or Pace , hopefully this will be corrected in a future firmware update....Possibly...:good:
Davyg57 said:
just been doing more reading up on what you said...... it appears that only activity that requires GPS can be saved/exported to/from the Amazfit Stratos or Pace , hopefully this will be corrected in a future firmware update....Possibly...:good:
Click to expand...
Click to collapse
Yes, this should be possible as basic functionality on this device. Also Amazfit 1 do not have this option.
But on this forum there was a script that could export data directly from sport_data.db on watch ( when rooted ). Man that was doing this is fzelle. Unfortunately this script is no longer works on Stratos. I hope he will find some thime and update it for Stratos purpose
Stratos - Strava - Endomondo
Davyg57 said:
Was toying with purchasing one of the above smartwatches, until I discovered that there is no support for the Endomondo app...
is there anyway to side-load the Endomondo app or a way to export the data from the Amazfit and then import into my Endomondo workout web page??
cheers for any insights... :good::good:
Click to expand...
Click to collapse
Hi, try tapiriik.com service - first year for free, next years by 5 USD per year. It can automatically synchronise activities between many sport apps. So when your activity will be sent to Strava, in some minutes it can be automatically in Endomondo. I use it for synchronise Strava - Runkeeper - Smashrun.
You can also try FitnessSyncer.com (free AFAIK) or export the activities manually using AmazeBackup and import to any service that accepts GPX/TCX.
I usually use my Pace with Endomondo, when i finish a run i save the session then from "Activities" screen i export in a .gpx file and connect my Amazfit to my pc. From Endomondo page ( pc ) i select "import from file" and i simply select and import the created .gpx file. Sorry for my bad english, i hope you can understand.
I purchased a Bip first, and subsequently upgraded and acquired a Stratos. I just didn't have the heart to sell off the Bip. In retrospect, I think that was a wise decision.
I have an Android handset. I find that both the Mi Fit as well as Amazfit Watch app for Android leaves a lot to be desired. Both are horribly slow to sync with the watch. At times, I feel like something has gone wrong. In comparison, Notify & Fitness for Amazfit is heads and shoulders better. Also, the data remains locally in the phone, and not get transmitted to some server in mainland China. But for the app to work with my Stratos, I have to compulsorily install the Amazfit Watch app for the QR code to be scanned and paired by the phone. Seems a bummer, as I have to install two different apps for the same job.
Is there any way of altogether bypassing the Mi Fit or Amazfit Watch app for Stratos to work similarly?
Hi,
I am using a Stratos 3 for 2 weeks now, and i am not completely satisfied with GPS / Strava datas.
FYI, i practice outdoor cycling (Commute, MTB, Road)
I am also using a Garmin Edge 1000 to compare datas.
I set the Stratos to Auto Sync with Strava....but i have to open the phone application to execute the sync...(Semi-auto sync finally)
And it is really strange, the auto sync datas are not what are in the watch or the application ! And of course, if i compare auto-sync datas and manual sync in Strava, i have the same issue !
Distance, Average and Max Speed, climbing, time, are not the same except HR !
In Strava i also see that the device is named Huami Amazfit Pace with auto-sync but the name is Amazfit Sports Watch.
Finally, comparing manual sync and my Garmin edge 1000 datas are a little bit different for average speed and distance but maybe it is because i have a speed sensor on the wheel connected to the Garmin. I should try without it to compare.
I am running the lastest official Rom update.
Do you think that using Paceficator firmware should resolve the problems ?
Thanks.