I have a problem with my xt615,
it started out with the bootloop problem.
after that i managed to get into flash mode (redscreen) installed the pc drivers
and tried to flash 2-3 different stock roms, and a recovery via RSD LITE version 6.
at the beginning the phone was recognized as a zeus flash device, but i changed that driver to a motorola usb device.
somehow i manage to get the phone connected in the FLASH MSM7227 but still no program can recognize it so i can flash...
since i tried to flash the recovery i cannot enter the Flash mode (red screen) and earlier, when i was trying to turn on the devices from 50power attempts 2 times it was the moto bootloop logo...
now i cannot do that...
any suggestions how to get this device flashed!?or get it into flash mode?!
all the time its blackscreen and as i enter the usb it connects to the pc depends on which mode...when i hold the powerbutton and connect it it will connect as flash device msm7227 but still...i cannot do anything via RSD LITE , also tried via adb to get it recognized. but no luck...
Help desperatly needed
Hi all,
Yes, i know there might be another topic on this, but trust me, ive looked, ive been looking for a solution for a full week now, and i know someone here can help me..
SO PLEASE HELP!!
I was running AOKP build6 on my SGS3 GT-I9300 International version, which performed excellent for more than a year, suddenly it became unstable, my phone would freeze completely and i had to reboot 10 times a day, it got worse, it just started rebooting out of nowhere
SO, i thought it a good idea to look for another ROM, and to be safe i tried flashing the stock ROM from the CMW recovery mode..
That did not work for some reason, it said Fail - so i went to try the PDA file option in Odin (newest version)
In Odin, i use the PDA button to load a md5/tar file, (Odin says 0COM/ connected, it can see my phone is connected) but when i start, it says Fail
-Phone will not start in recovery mode, it DOES go into Download mode, but any other way of trying to start in Download mode, it gives the following message:
"firmware upgrade encountered an issue please select recovery mode in kies"
I have updated (reinstalled) the latest version of Kies, but Kies cannot connect to my phone (while Odin does)
It just keeps "Connecting" but does not connect, i tried all options in Kies "connection problems" (mine is in dutch) but it just will not connect
I am almost sure i unticked the box for USB Debugging, / so USB Debugging mode is OFF (im pretty sure)
Can this be the reason why Kies does not connect?
Am i completely scr*wed now?
I tried the firmware on another topic here, but in Odin it just says FAIL
I think you would call this HARD BRICKED??
i can still boot into Download mode, but is that enough? cause USB Debugging is OFF and Kies does not find my phone
Is it neccesary to replace my mainboard perhaps? I feel i have no luck trying to push firmware whatsoever...\
This hurts (since my backup phone is a slow unrooted S1
PLEASE PLEASE some help ?? ?
Sounds like either partial sds (product name blank in download mode) or a hard brick.
Lots of other identical threads, if you've read them then you already know there is no easy solution.
Use "firmware update and initialization" option in kies, under tools.
Hello,
During the past days I've been trying to flash my C7 with no success. When pressing power button, it turns on and displays the Alcatel logo but stays there, it does not load the OS.
I have tried to use SPtools to flash it, I have the mtk drivers installed in my PC. When I plug the switched-off phone to the computer it turns on and couple seconds after my PC detects it (I can see the preloader mtk loaded on the device manager); however, one second right after it is detected, it is disconnected as it keeps booting to show the logo and stay there. Obviously, if the phone is not detected I cannot use SPtools to flash it.
Any suggestion will be highly appreciated.
PS: I have also tried to connect to it with adb, and dump a ROM using sideload with no sucess, the PC recognizes it from the recovery but after copying the image nothing new happens on reboot.
My tablet totally unable to turn on.
Tried power + volume down + home, no response at all.
However, when plug into the PC, the download mode appear and flickering very fast and stated "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
When connect to kies, firmware upgrade and initialisation, halfway downloading and stated "failed to upgrade firmware due to unexpected error. Do you want to run firmware emergency recovery now?"
I cannot find the recovery code in tools and unable to proceed further.
Had tried ODIN, download 3 different firmware from my country and my model in Sammobile and failed too.
Had tired changing 4 USB cables, 3 PC and all same result.....
Thanks all!
My vivo Y55L was stuck in a boot loop and did not go ahead of the vivo screen.
I tried flashing the stock ROM through QFIL but it gave me a EDL Firehouse error and the flash was unsuccessful. I disconnected the phone to reconnect but to my misery the phone does not connect to QFIL anymore. When i press the power up and down button and connect the USB the computer gave me an error USB device not recognised and may have malfunctioned. if I power up the phone now it doesn't start and goes back into the bootloop for 2-3 times before switching off. I have tried reconnecting the USB and reinstalling ADB drivers and Qualcomm drivers. But still the same error, Device receptor not recognized and USB device not recognized may have malfunctioned. Any solutions will be appreciated