Related
If I flash TWRP using this method:
http://forum.xda-developers.com/red...-to-flash-twrp-recovery-unlock-t3473294/page1
Will I be able to normally flash CM/MIUI roms without unlocking bootloader. My bootloader was never unlocked btw.
I dont care about OTA update, I never dirty flash. Always clean
@malimukk
Hi,
Of course you can do that, just read the second post of OP.
Thanks.
karkand said:
@malimukk
Hi,
Of course you can do that, just read the second post of OP.
Thanks.
Click to expand...
Click to collapse
Also flash kernels etc.?
I have seen some discussions about which TWRP to install. Alka or Cofface.. what would you recommend?
Thanks
i replaced the default recovery.img with twrp 3.0.2 (renamed and replaced as recovery.img)for redmi note 3.the phone flashed sucessfully but i cant enter into recovery mode.when i press "power+volume up" its showing to connect charger.even tried from the updator app but no use.any help !
superstar007 said:
i replaced the default recovery.img with twrp 3.0.2 (renamed and replaced as recovery.img)for redmi note 3.the phone flashed sucessfully but i cant enter into recovery mode.when i press "power+volume up" its showing to connect charger.even tried from the updator app but no use.any help !
Click to expand...
Click to collapse
Do you have an unlocked bootloader? You need to check in fastboot mode, by typing in fastboot oem device-info
you may have to boot straight to recovery, or the recovery image may get overwritten
my bootloader is locked.i think above method is for locked bootloader.right.i pressed power+volume up right after flashing(after disconnecting cable),phone showed mi logo and then after 5-6 seconds its showing to connect cable again. also when i use miflash tool to unlock bootloader.its not showing advanced menu in miflash tool.any solutionfor that too.my desktop is windows 7 32 bit os.do i need a 64 bit os to get all options in miflash tool.pls any solution.
Can anyone confirm the successful installation on Kenzo along with the step by step guide. And please let me know which fastboot rom should be used for fastboot flashing. Because we have 3 type of ROMs on Kenzo I.e. Global Stable, Global Developer or Chinese Developer rom. Please provide the step wise installation guide so that I can carry on
manudhomra said:
Can anyone confirm the successful installation on Kenzo along with the step by step guide. And please let me know which fastboot rom should be used for fastboot flashing. Because we have 3 type of ROMs on Kenzo I.e. Global Stable, Global Developer or Chinese Developer rom. Please provide the step wise installation guide so that I can carry on
Click to expand...
Click to collapse
I can't write you a detailed step-by-step guide because my English is not so perfect, but: you need to install the Global/Chinese Developer rom. Must be Developer rom, but you can choose which of them (Chinese or Global).
I made it with Global Developer, so I can confirm that this method perfectly works.
Luck!
Mononitoto said:
I can't write you a detailed step-by-step guide because my English is not so perfect, but: you need to install the Global/Chinese Developer rom. Must be Developer rom, but you can choose which of them (Chinese or Global).
I made it with Global Developer, so I can confirm that this method perfectly works.
Luck!
Click to expand...
Click to collapse
pls help
1.can i use official twrp version from there site or need any modded version
2.pls confirm i only have to replace "recovery.img" and no other system files
superstar007 said:
pls help
1.can i use official twrp version from there site or need any modded version
2.pls confirm i only have to replace "recovery.img" and no other system files
Click to expand...
Click to collapse
You need the modded version and yes, only have to replace that .img and no other.
Check this thread, is which I followed
http://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
Mononitoto said:
You need the modded version and yes, only have to replace that .img and no other.
Check this thread, is which I followed
http://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
Click to expand...
Click to collapse
thank you so much it worked perfectly.and i hope installing xposed framework wont be a problem in the future.
My RN3 having officialy unlocked bootloader.When i update incremental OTA (MIUI 8 Global Beta 6.8.11 to 6.8.24) through TWRP, device stucked at Mi Logo (boot loop).Then i Flash Fastboot rom of MIUI 8 Global Beta 6.8.24 through MiFlash Tool.Finally Device is working but while flashing it removes root access and bootloader again LOCKED again.
While proceeding with MiUnlock it show's following errors
Your device isn't supported by Mi Unlock.
And while applying again on mi unlock page it shows following error
Sorry your application has been rejected
itzsarath said:
My RN3 having officialy unlocked bootloader.When i update incremental OTA (MIUI 8 Global Beta 6.8.11 to 6.8.24) through TWRP, device stucked at Mi Logo (boot loop).Then i Flash Fastboot rom of MIUI 8 Global Beta 6.8.24 through MiFlash Tool.Finally Device is working but while flashing it removes root access and bootloader again LOCKED again.
While proceeding with MiUnlock it show's following errors
Your device isn't supported by Mi Unlock.
And while applying again on mi unlock page it shows following error
Sorry your application has been rejected
Click to expand...
Click to collapse
Try unlocking boot loader unofficially
[email protected] said:
Try unlocking boot loader unofficially
Click to expand...
Click to collapse
How?
Procedure Please
itzsarath said:
How?
Procedure Please
Click to expand...
Click to collapse
log out from existing mi account and create a new one. you can unlock via new one.
dont delete existing account
itzsarath said:
How?
Procedure Please
Click to expand...
Click to collapse
This could be helpful
Give a thumbs up if you found it useful
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
----------------------------------------------------------------------------
Now if you want to install any other ROM like cm13
Procedure for ROM installation
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
Official method is worst. Its not like Motorola who gives unlock code within a min.
Try unofficial above method
Do we still need to flash modified Boot.img for first time flashing TWRP ?
http://forum.xda-developers.com/red...official-twrp-3-0-2-0-recovery-redmi-t3352966
Thanks
[email protected] said:
This could be helpful
Give a thumbs up if you found it useful
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
----------------------------------------------------------------------------
Now if you want to install any other ROM like cm13
Procedure for ROM installation
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
Official method is worst. Its not like Motorola who gives unlock code within a min.
Try unofficial above method
Click to expand...
Click to collapse
tthanks a lot for the steps. btw which twrp does this zip includes ? safe or alka or any other ?
can i flash miui europe with this unlock method? do i have to take an additional step?
smustafasms said:
tthanks a lot for the steps. btw which twrp does this zip includes ? safe or alka or any other ?
Click to expand...
Click to collapse
Try safe twrp
[email protected] said:
Try safe twrp
Click to expand...
Click to collapse
if i do this proceedure and doesnt flash rom afterwards will my existing miui8 stable boot normally ? or its important to flash custom rom ?
thanks for ur help
smustafasms said:
if i do this proceedure and doesnt flash rom afterwards will my existing miui8 stable boot normally ? or its important to flash custom rom ?
thanks for ur help
Click to expand...
Click to collapse
Yes you need to flash a ROM. Whether it is official miui 8 or beta miui 8 or any custom ROM. Cm13 and RR v5.8.0 7.1-N is better.
Now if you need your ROM back with twrp and root access. Just install miui 8 official ROM through twrp and don't try to change the recovery its the safe twrp I provided with. And its important for unofficially unlocked bootloaders like you.
Since it is official miui 8 so it will block your bootloader but to prevent this just install universal boot image patcher after installing this ROM.
You can find it on net and after that reboot and install. Now to get root access download and install SuperSU zip from net via twrp and reboot.
[email protected] said:
Yes you need to flash a ROM. Whether it is official miui 8 or beta miui 8 or any custom ROM. Cm13 and RR v5.8.0 7.1-N is better.
Now if you need your ROM back with twrp and root access. Just install miui 8 official ROM through twrp and don't try to change the recovery its the safe twrp I provided with. And its important for unofficially unlocked bootloaders like you.
Since it is official miui 8 so it will block your bootloader but to prevent this just install universal boot image patcher after installing this ROM.
You can find it on net and after that reboot and install. Now to get root access download and install SuperSU zip from net via twrp and reboot.
Click to expand...
Click to collapse
in edl mode when i try to run flash flash twrp.bat file its get stuck on waiting for device
smustafasms said:
in edl mode when i try to run flash flash twrp.bat file its get stuck on waiting for device
Click to expand...
Click to collapse
Oh no. This problem still continues.
I think you have to flash global kenzo 7.0 ROM through mi flash program on PC and then proceed to edl and flashing twrp.
I will be posting the instructions. Today only.
But I have unlocked it without this method
+1 , I get waiting for device also - because cannot see adb devices Drivers are installed
and when i try flashing a developer rom through miphone tool , im always getting errors
MODS: Please move this question to the HELP section - incorrectly posted. Thanks.
Hello,
I am trying to root the Global MIUI _V10.2.1.0.PECMIXM ROM using Magisk. I want my phone to remain encrypted, and having spent all day today trying to achieve this, I am turning here for help.
I have tried flashing via Fastboot and TWRP, have tried flashing Disable DMVerity (without disabling the force encryption) before, and after flashing Magisk. I hava managed to get Magisk 18 flashed and able to boot to the ROM, but when I open Magisk Manager (Installed by the flash) it updates itself and says it needs to install Magisk, proposing to download it - or patch boot img.
Every time I try to flash the downloaded zip, or try fastboot flashing the modified boot.img, the phone won't boot - it just ends up in TWRP recovery.
I have wiped data 100s of times to try to fix this, to no avail.
I have tried to boot into TWRP without flashing it, but this just hands on the TWRP flash screen every time.
Any help / tips would be appreciated.
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
msg7086 said:
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
Click to expand...
Click to collapse
Thanks for replying. Yes, following tutorials, have unlocked my bootloader and can flash ROMs, just cannot get the latest MIUI 10 Global Stable rooted, without decrypting the phone. I have managed it on the Xiaomi.eu global stable, but not with the original Stock ROM.
Has anyone succeeded?
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
t4manh198E said:
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
Click to expand...
Click to collapse
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
My post help u to install twrp or flash twrp
I do not know your mean what is flash twrp !?
Reboot to recov cook by press volumn +/- and power button
Use magisk 17.1 stanle, u can find it in my gg driver or download in miui eu 's page
---------- Post added at 05:03 AM ---------- Previous post was at 05:02 AM ----------
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
1 in 2 ways is certainly successful
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
nfadrizp said:
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
Click to expand...
Click to collapse
I rooted firsr u
nd now i am using mi mix 3 ???
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：new
TWRP-3.4.2BREDMI9.rar - 蓝奏云
文件大小：31.8 M|
wwa.lanzous.com
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Is your device boot successfully without any problem
I think it is not safe to flash this recovery in global version ROM...
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Thanks for sharing. This may be better than the other one from unofficialtwrp. Forks by wzsx150 are usually good from my past experience. Anyone successfully installed?
Shas45558 said:
Is your device boot successfully without any problem
I think it is not safe to flash this recovery in global version ROM...
Click to expand...
Click to collapse
My device has been tested without problems
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
lkj00 said:
My device has been tested without problems
Click to expand...
Click to collapse
Great.....you should try gsi on your device....
Sounds good and regards to the developer, But I recommend that to wait until the TWRP be tested well and release the first update vesion .
for me I will keep waiting for the official TWRP, no need to rush there is no any custom rom
Well it works for me. I use the redmi 9 nfc 3/32 lancelot.
Thread Title Edited to: Redmi 9 unofficial TWRP (Sep,2020)
Funk Wizard said:
Thread Title Edited to: Redmi 9 unofficial TWRP (Sep,2020)
Click to expand...
Click to collapse
Thanks for quick respond.
I just want to know can this be used to flash full magisk? I am in indian rom. Will there be brick issue or something?
Colossus96 said:
I just want to know can this be used to flash full magisk? I am in indian rom. Will there be brick issue or something?
Click to expand...
Click to collapse
I guess you can test it yourself. Quite easy to fix things if it doesn't boot the TWRP. You'll simply flash the original recovery.img from the current MIUI full ROM installed on your phone to erase the TWRP without even erasing userdata. My bootloader is currently locked so can't test it now. About bricks, as you know this is an MTK so you have to be extremely careful.
The advantage with TWRP is you can mod the system so long as you enable write access to that partition. Flashing Magisk modules also works better via the recovery.
Last thing, I think the only way you can get root on MIUI is through the patched boot method. Flashing the Magisk installer zip in TWRP just doesn't do.
Abdullah.Csit said:
Sounds good and regards to the developer, But I recommend that to wait until the TWRP be tested well and release the first update vesion .
for me I will keep waiting for the official TWRP, no need to rush there is no any custom rom
Click to expand...
Click to collapse
I also wait for offical..i root my device and use mod...
I do not want to take risk because of mtk prossessor...
I did
nielsync said:
Thanks for sharing. This may be better than the other one from unofficialtwrp. Forks by wzsx150 are usually good from my past experience. Anyone successfully installed?
Click to expand...
Click to collapse
I did installed it into my Redmi 9 4/64 Indonesia version... So far no problem at all
---------- Post added at 12:57 AM ---------- Previous post was at 12:50 AM ----------
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Hi sir, i have tested this twrp, and its stable enough.. but i wanna ask u for helping us make a stable/official one based on PBRP (Pitch Black Recovery Project). Can u help us with this??
My telegram : @afdy_y
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
What is redmi 9 one key flashing tool? How can i find it?
Shas45558 said:
What is redmi 9 one key flashing tool? How can i find it?
Click to expand...
Click to collapse
It means the flashing program in the zip. You can just flash the img file via fastboot command. I tried, it works.
Copy the .img file to your fastboot folder & flash .
Almost brick my device.....
Today I installed this in my redmi 9....
I was surprised when I see that my device is is boot into this recovery....
I am very happy but my happiness gone after a few minutes.....
When I boot into system I cannot boot into recovery.....
So I format all user data and chach....
But same thing happen To me....
I flash this recovery again with fastboot mode.. then I can boot into recovery...
I think it could be happen because my phone is encrypted... So I force dencrypted my device....
When I want to boot into system. I fail to boot no system and no recovery...
I think it is over but luckily I able to boot into fastboot mood ..then I flash boot and recovery....
I realise that there is no need to flash this recovery... Because you can root your phone without recovery....
If you try to flash GSI ROM... It will not happen because it does not support GSI ROM
There is no option to erase system and vendor separately.....
So who want to flash GSI via this recovery, I suggest you do not flash it because we do not need it this time....
I am not sure it may be happen only with me. Feel free to share your experience...
Shas45558 said:
Today I installed this in my redmi 9....
I was surprised when I see that my device is is boot into this recovery....
I am very happy but my happiness gone after a few minutes.....
When I boot into system I cannot boot into recovery.....
So I format all user data and chach....
But same thing happen To me....
I flash this recovery again with fastboot mode.. then I can boot into recovery...
I think it could be happen because my phone is encrypted... So I force dencrypted my device....
When I want to boot into system. I fail to boot no system and no recovery...
I think it is over but luckily I able to boot into fastboot mood ..then I flash boot and recovery....
I realise that there is no need to flash this recovery... Because you can root your phone without recovery....
If you try to flash GSI ROM... It will not happen because it does not support GSI ROM
There is no option to erase system and vendor separately.....
So who want to flash GSI via this recovery, I suggest you do not flash it because we do not need it this time....
I am not sure it may be happen only with me. Feel free to share your experience...
Click to expand...
Click to collapse
This recovry is only to flash magisk for now. Flashing ROMs not supported yet. Don't try to flash rom with this.
That's mean this recovery is not helpful.....
Because we root our devices without any recovery....
Colossus96 said:
This recovry is only to flash magisk for now. Flashing ROMs not supported yet. Don't try to flash rom with this.
Click to expand...
Click to collapse
So it's just for the developers ( As first step to deal with this awful Mediatek ). We will look forward and hopping to get lucky as redmi note 8,8pro.
Abdullah.Csit said:
So it's just for the developers ( As first step to deal with this awful Mediatek ). We will look forward and hopping to get lucky as redmi note 8,8pro.
Click to expand...
Click to collapse
In order to get that lucky we will need source code. Without source code nothing can be done properly.
there is no forums for redmi 10
San2005 said:
there is no forums for redmi 10
Click to expand...
Click to collapse
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
joke19 said:
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
Click to expand...
Click to collapse
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
San2005 said:
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
Click to expand...
Click to collapse
How did you get miui 13 mine is stuck on 12.5 and i have some bugs that might get solved with a update.
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot [name of the file twrp].img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
install magisk.zip if you want
Reboot system
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english :/
alan7283 said:
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot twrp13.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
Reboot system
If you prefer orange fox recovery, go in the twrp, flash boot-orangefox.img in the recovery and reboot !
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english
Click to expand...
Click to collapse
You got MIUI 13 ?
Yes
alan7283 said:
Yes
Click to expand...
Click to collapse
Howw ??? OTA ?
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
alan7283 said:
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
Click to expand...
Click to collapse
I would love too but won't I lose warranty?
dda7lite said:
I would love too but won't I lose warranty?
Click to expand...
Click to collapse
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
alan7283 said:
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
Click to expand...
Click to collapse
Your sure? because I can't lose my 3 year warranty
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
alan7283 said:
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
Click to expand...
Click to collapse
Yeah and I will probably not flash it today I might sent it to warranty first because it's giving me a really weird problem
What problem?
alan7283 said:
What problem?
Click to expand...
Click to collapse
When I plug in charger phone immediately becomes unresponsive, touch stops and won't turn on (only with fingerprint)
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
alan7283 said:
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
Click to expand...
Click to collapse
You can write the tutorial if you want and I'll save it
dda7lite said:
You can write the tutorial if you want and I'll save it
Click to expand...
Click to collapse
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
alan7283 said:
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
Click to expand...
Click to collapse
I have 2 questions does it work on Redmi 10 2022 and don't it get Bricked if I lock bootloader with other region ?