Hello,
i get big problem maybe anyone can help.I have Iphone 6s clone and i was flashing with SP Tool and after flash i get OK i disconnect phone and i try to turn on but nothing happen, nothing working no reaction, when i connect again to computer i get only sound (connected after 2sec disconnected) and it's non stop, but still nothing working.Maybe its bricked all ? maybe can get help for this
Related
Hi everyone, I was installing a ROM miui on my alcatel ot 995, and was connected by USB and suddenly he hung up and never called. Gives no image, sometimes when connected to PC the lights begin to flash and gives a sound on the computer as it had been "connected". The phone has two months, but I can not go and root for garantia.Eu already tried the recovery by cmd does not work. :crying: .Someone solves me to overcome this problem and allow me to operate the mobile phone?
Help please, i want my Alcatel OT 995 back ((((((
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
pepeg said:
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
Click to expand...
Click to collapse
Hi, you solved your problem? I have the same issue, help me
Hello, i have tablet Acer A1-811 and now its bricked, it seems to be dead but it can be connected to the pc but its only reconnecting (each few seconds it connect usb and than disconnects it). I found some threads here about ressurecting this devices via spflashtool, but it has some error with scatter file in every acer rom. But i even know if it will work due to reconnecting problem. Have pls somebody some experience with this devices? I have flashed some devices in past, everything worked fine, even if there was problem, there was always way to repair it but i never seen to stock rom destroy device this way, i have similar problem in past with samsung galaxy mini when pc update bricked it too bud it was easy to repair it. thank you for your help. merry xmas
Hi all,
I have a yu yunique mobile which I got from my friend. He said the mobile is not working. I wanted to re-use that mobile. The Mobile is not switching on. If USB is connected, observed red led on near the front speaker. I searched the internet and got to know that If red led is on near the speaker, then most likely it is a hard brick. If I connect my mobile to PC, PC is not able to detect the mobile. I install all qualcomm drivers. Can any one help me to revive this phone? Is it really hard bricked? If it is hard bricked is there any way to revive this device? Thank you.
now i can able to detect my mobile in my pc. I removed the battery and connected the usb. since battery was not removable, I unplugged the flex connector which connects battery to the main board. with this I can able to flash the device using qfil. but after flashing is success I connected the back the battery. NowI am not able to see any activity on phone. Now that red led is not on. but nothing is happening.
Now i am able to boot up the device guys. When device was not working , I saw a video to revive this device. He suggested to short BOOT and 1P8 pin in the mother board. I did that, then after flashing the didn't removed that short. So after removing the short It worked fine....
bro please help me im on the same situation my yunique yu4711 hard bricked and its detects as qualcomm 9008.. how did u make it...please write details and gimme the qfil and flashing tools details please bro....
i want to ask for your help on how can i fix this problem when i tried to connect the phone using usb to pc it is only trying to connect and reconnect the phone i tried many things i found in the web to fix the problem but no luck it is still dead only the hope i have now is that sound of connecting and reconnecting the phone to pc using usb cable the phone is totally dead please help my phone thanks a lot in advance!
I try with sp flash tool... nothing but DRAM errors (4032-0xFC0)
please i need a help .