Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
costeph said:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
Click to expand...
Click to collapse
Hi,
here is my solution if can help.
I had on my vibe shot s208 rooted ROW. It stacked after SU update in boot loop.
1. I did wipe data without formatting from recovery mode (Vol+ and Vol- and Power button. When Logo is on release power button and hold Vol+ and Vol - until you are in recovery mode). STILL boot loop.
2. I did wipe data with formatting from the same menu. - STILL boot loop.
3. I did factory reset from recovery menu (Vol - and Power after logo is on release Power and hold Vol - until you get recovery mode) - STILL boot loop.
Then I did next:
1. I downloaded and installed QFIL (QPST_2.7.422) - I am not allowed to post links yet.
2. I have connected OTG adapter to phone. Phone was off.
3. then connected OTG to PC. It was some HDD activities but I did not hear any sound.
4. press Vol- for as long as something is going on - HDD activities. Then I think came up sound too - but not sure.
5. I had installed Qualcomm USB drivers from before I suppose.
6. Because I couldn't see my device as ...908 I disconnected and connected again usb cable... then I got my device as ...908 in device manager, but it was written "RECONNECTED" or similar in front of word "QUALCOM".
7. Then just follow instructions for QFIL. and ROM will be installed.
First I have installed INTERNATIONAL no root ROM. But because I needed phone to be rooted in order to use data recovery software I flashed again with s240 ROOTED. When I flashed second time I did not use OTG, just direct usb cable connection to PC, and my phone was again recognized after I reconnected usb cable and in device manger was "RECONNECTED" in front of word "QUALCOM".
Hello, thanks for replying. But I already tried all the roms with qfil, they were successfully installed as wtih miflash but I always got a initializing boot loop... Unfortunately I tried some other method, I successfully erase all partitions, I m now in 9006 mode with a long vibration on start and I cant do anything now No flashing works anymore... I ll try some stuff when I had a little time.
did you find a solution ?? , cause I have the same problem ... tried everything, adb or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .... this problem happened with my phone after wiping user data and trying to restore QCN, cause before this problem I had another one with network services, tried to solve it, and here I am, from bad to worse
Hello,
I had the same problem. I tried with QFile and MiFlash but unfortunately without success. will you a track ?
I reinstalled the drivers QDLoader HS- USB Driver. I maintained volume + for 3 seconds , however, nothing happens ! (Before it worked ) I also tried adb reboot eld the prolème is the USBport phone is not known !
I followed the procedure of DejXDA carefully until the end staying press the VOL- the phone starts to recharging battery ... have you others sollutions ? thanks in advance.
Hey there !
Same problem for me... The solution may be to rebuild the partition table, but we need a working phone, and a backup with QPST.
Would anyone post a *.qcn file from his phone, made with QPST Software Download ? or a *.hex ?
And the user partitions ? Or a factory image (*.mbn) ?
Any gurus here, what would you advise for that problem ? Would using QPST properly work ?
Cheers !
Z90-7 (Z90a40) unbricked (at last...)
Hello!
After days and days of fails, my Z90-7 is unbricked!
How?
Just follow the OTG cable method, but copy in the SD card, in the sdfuse folder, this image:
Z90a40_S209_150716_ROW.qsb
You can download it from russian forum*, freely.
*I'm not allowed to post links, but enter the exact reference (Z90a40_S209_150716_ROW.qsb) in Google search (don't accept the Google's proposition to correct it), the link is the first answer. Use Google trad as I did if you don't speak russian .
Hello ,
I have a Lenovo vibe shot Z90-7
I wanted to set an international Rom 5.1 and now since it gets stuck on initializing indefinitely.
I have access to the recovery mode so I spend not to turn off the phone.
I Agency will proceed as this I put out the létélphone I press the volume + and I connect it to the ordidateur to put in download mode, but there is nothing after it launches in initializing .
So I essyer with presses of flight - and connects to the PC and it remains on the Lenovo logo.
In prériphérique manager there wrote lenovo ADB android.
Can not have Qualcomm hs -usb in the Port . even after installing the driver.
you have an idea what I can do?
Thank you
z90-7 not working
Hi,
i tried to install 20150619_VIBEUI_V2.5_1525_5.404.1_ST_Z90-7-Root_Phoenix rom on my lenovo vibe shot using Qfil , After Qfil finished flashing the mobile shutdown and It does not turn on anymore
and computer does not recognize it anymore.
what can I do??
Hi, I have the BLU Energy X, and I had flashed some ZIP mods via TWRP. I decided that I didn't want them, and read somewhere that I had to flash my phone using the stock ROM. I used the ROM from NeedRom here: needrom[.com]/ download/ blu-energy-x-e010q which should be the correct one for my phone. It also shows the . I installed proper drivers and flashed using smartphone flash tool. It completed, and I unplugged my phone and pressed the power button. Nothing happened. No combination of power and volume buttons turn this phone on. I have tried flashing again, and I got the error "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)". My phone does show up in Device Manager when I plug it in, as USB Serial Device (COM6) under the Ports category. Sometimes it will go in a loop of SHowing up then 3-5 seconds disconnecting from PC, then connecting again. Before I flashed I used the format option because I was getting an error, and that was the fix for it. The flash completed successfully. I did not touch the device while it was flashing, or the USB cable. I'm in grade 8 and I get a really allowance, so I couldn't buy this phone for about 8-10 months again, and I really want to avoid that. I am/was rooted, if that helps. Thanks everyone here in advance, and I really hope you guys know how to fix this! Thanks alot
I'm currently having issue with my phone, Redmi Note 3 Pro Kenzo(snapdragon 650) charged my phone overnight after completely drained it and the next morning i realized that it's on boot loop.
I tried dozens of method since the past 72 hours, none of them works. My phone run on stock miui 8 rom, didn't turn on the dev mode/debugging so basically just a pure stock out of the box phone with 0 tweaks.
It loops without the android logo below it. Just the MI logo in the middle of the screen and it reboot every 10-15 seconds or so.
I am able to run on fastboot mode (volume down+power on button) then i hook it up to my computer, used a patch to boot it on EDL mode and flash the stock fastboot rom using MiFlash and it states that i have successfully flash the rom on the phone. But when i turn it on, it loops on the MI logo again..
Tried dozens of method, flashed the emmc file and etc but none of them works.
Even mod on xiaomi forum gave up on me and ended up saying that i've roasted my logic board lol
But I read a thread on someone who had the same problem with mine but he have unlock his bootloader and get his phone back to life by flashing the twrp recovery.
When i try to hook up my phone with command prompt, running on fastboot mode it detects my phone when use the "fastboot devices" but when i use the "adb" command it stated that my computer didn't detect my device.
any thoughts?
rlly need some help here guys :/
HI All,
My device redmi Note 4 got struck in MI logo,It is not Turning on, it is giving vibrations everytime but phone is not booting up.
1)Problem is phone bootloader is locked, i can't unlock the phone now because mi account is not added in the settings.
2) i Tried flashing the various miui fastboot stable roms with mi flash software in PC, via testing points edl mode,flashing is successful but still the phone in not turning on.
3) even i can't enter into recovery mode by Volume UP+Power key ..meaning no recovery is present in the phone. one good thing is fastboot mode is working.
from the last 3-4 days i searched every where in the internet, Also i suspect the phone mother board hard ware problem.
if any experts or if anyone came across the same problem , please give me the solution for this.Any rom is okay, i just want to turn on the phone. please help me.
Thanks in advance,
Prashanth
hello everyone,
my redmi note 3 pro special (kate) with locked bootloader and always original roms (never modified) has been stopped for about 2 years due to inactivity, but before it had always worked great!
wednesday I tried to turn on my kate.
the device went into continuous bootloop. whereupon I tried to enter fastboot, activate edl and flash with miflash a whole series of roms, from the last, to 9.6, 9.5, 6.7 and all those that can still be found, but always with the same disappointing result: the device makes the first start (sometimes forcing it with a restart because it remained enchanted for hours in the initial animation after the "mi" logo), but immediately during the initial configuration of the so returns to restart without allowing use.
whereupon, I decide to open the back of the redmi and disconnect the battery overnight, in the hope that this could solve any problems.
but unfortunately nothing...
after yet another flash and I start, I can't even start this morning: when I press the power button the fixed initial logo "mi" starts, goes off and starts again ... I'm practically in infinite bootloop ...
I only need the kate as a forklift, but I would be sorry to have to throw it away completely.
does anyone have a suggestion to get out of this troubles?
kletius said:
hello everyone,
my redmi note 3 pro special (kate) with locked bootloader and always original roms (never modified) has been stopped for about 2 years due to inactivity, but before it had always worked great!
wednesday I tried to turn on my kate.
the device went into continuous bootloop. whereupon I tried to enter fastboot, activate edl and flash with miflash a whole series of roms, from the last, to 9.6, 9.5, 6.7 and all those that can still be found, but always with the same disappointing result: the device makes the first start (sometimes forcing it with a restart because it remained enchanted for hours in the initial animation after the "mi" logo), but immediately during the initial configuration of the so returns to restart without allowing use.
whereupon, I decide to open the back of the redmi and disconnect the battery overnight, in the hope that this could solve any problems.
but unfortunately nothing...
after yet another flash and I start, I can't even start this morning: when I press the power button the fixed initial logo "mi" starts, goes off and starts again ... I'm practically in infinite bootloop ...
I only need the kate as a forklift, but I would be sorry to have to throw it away completely.
does anyone have a suggestion to get out of this troubles?
Click to expand...
Click to collapse
Factory reset
Black_Stark said:
Factory reset
Click to expand...
Click to collapse
I've tried several times... but... nothing
kletius said:
I've tried several times... but... nothing
Click to expand...
Click to collapse
Did u replace any component at repair shop?
Black_Stark said:
Did u replace any component at repair shop?
Click to expand...
Click to collapse
I've tried factory reset, flashing several roms, unmount the battery... now the phone Is witouth battery, i want to try keep witouth Energy a few days ...