Related
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
Hi guys im proud to present you my newest work for Galaxy S6 and S6Edge
THE KALI NETHUNTER
Nethunter is The Kali Linux Android Rom addon that allows you to perform various attacks
HOW TO INSTALL NETHUNTER ?
Just flash the zip over your existing Stock Rom installation it will add all the Nethunter stuff to it
DOWNLOADS
ROM PATCH
CREDITS
ME (J0SH1X)
Noxxxious (for his kernel which i used as base)
Kali dev team
BUGSYou tell me
Can you explaine what is this ?
Sent from my SM-G920F using Tapatalk
tazaga said:
Can you explaine what is this ?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
you know kali linux ?
that linux to hack stuff and so network attacks thats me mobile variant of it
Thanks for this! I've been waiting for a while for a Nethunter release for my S6 ill give it a try and post the bugs i encounter!
Do we need particular rom to run it? Or this zip can be flashed on every rom?
erghetto said:
Do we need particular rom to run it? Or this zip can be flashed on every rom?
Click to expand...
Click to collapse
your rom will work i guess because your using the kernel i used as base
J0SH1X said:
your rom will work i guess because your using the kernel i used as base
Click to expand...
Click to collapse
My signature is much outdated xD now i am on tn rom with tn kernel (N5 port, so i suppose it won't work).
Thanks anyway ^^
Finally someone made it. Thank you VERY MUCH!
can u tell us plz what it gives ? what options ? ty
im coming from griffin rom with nog kernel
morad23 said:
can u tell us plz what it gives ? what options ? ty
im coming from griffin rom with nog kernel
Click to expand...
Click to collapse
This isn't a rom, it just gives you access to kali nethunter tools, these tools are used to test network security if that is what you wish to do, it can also allow you to attack networks, you'll probably need to learn how to use this,, Google kali nethunter to learn more
Hi, I installed the kali and the installation worked well. However, I can´t open the terminal and some of the features that use the terminal also dont work. e.g: Wifite.
PS: I tested it in two different roms: Nano rom and Stock rom and the device is a SM-G920F
@erghetto: what version of tn rom are u using. Just asking, because I'm downloading it and wondering what version is better. 5,7-5,9 or 5,1-5,2?
Will it work on TouchWiz based roms?
JeOZ said:
Will it work on TouchWiz based roms?
Click to expand...
Click to collapse
Yes it will work on stock roms
Is there a way for it to make phone bootloop if installed on a "wrong" kernel?
I want to test it on the XstreSto Lite ROM with the N0G33K kernel but I'm kind of worried about failing it because of the kernel
_Nexus8_ said:
Is there a way for it to make phone bootloop if installed on a "wrong" kernel?
I want to test it on the XstreSto Lite ROM with the N0G33K kernel but I'm kind of worried about failing it because of the kernel
Click to expand...
Click to collapse
Speaking from experience, you can brick your device in many different ways toying around with Nethunter installations. I can't speak for the OP's post but I just finished porting Nethunter to the SM-T580 (Tab A) and I made use of the back-ups I had on hand a few times. I wouldn't advise messing around with this unless you are able to back up your boot (kernel), recovery, system, and data and store them safely off your device. and are confident in troubleshooting bootloops. As long as you are oem unlocked and have a factory ota to restore from, its pretty hard to hard brick these days.
REtails said:
Speaking from experience, you can brick your device in many different ways toying around with Nethunter installations. I can't speak for the OP's post but I just finished porting Nethunter to the SM-T580 (Tab A) and I made use of the back-ups I had on hand a few times. I wouldn't advise messing around with this unless you are able to back up your boot (kernel), recovery, system, and data and store them safely off your device. and are confident in troubleshooting bootloops. As long as you are oem unlocked and have a factory ota to restore from, its pretty hard to hard brick these days.
Click to expand...
Click to collapse
Okay, I'm going to backup all my data then try to flash the ZIP and if it bricks I'll flash a factory ROM
I keep you updated
Does this works on any grace ux rom?
I got this installed but terminal stop working when I try any command :/
Edit : nevermind, I got this working after a reboot
Is there a s6 edge plus version?
I have installed Nitrogen OS 7.1.2 and i have flashed Franco Kernel from recovery, the problem is that when i open the FKUpdated app it say Uh oh! Your device is not supported by franco.Kernel.
How can i fix that and what is causing that?
After the flash via TWRP i lost root access
Thanks
Only Lineage OS is supported. Flash it manually. Also Franco kernel settings won't be applied on Nitrogen as Nitrogen f***s up with everything. You need to unroot and flash SuperSU for root.
bhatt095 said:
Only Lineage OS is supported. Flash it manually. Also Franco kernel settings won't be applied on Nitrogen as Nitrogen f***s up with everything. You need to unroot and flash SuperSU for root.
Click to expand...
Click to collapse
Where i can find The SuperSU for 7.1.2? the SuperSU-v2.79-201612051815 is ok?
LawlietPhoenix said:
Where i can find The SuperSU for 7.1.2? the SuperSU-v2.79-201612051815 is ok?
Click to expand...
Click to collapse
No..
You need latest v2.79sr3
Thank you for clarifications guys.
bhatt095 said:
Only Lineage OS is supported. Flash it manually. Also Franco kernel settings won't be applied on Nitrogen as Nitrogen f***s up with everything. You need to unroot and flash SuperSU for root.
Click to expand...
Click to collapse
How can one confirm if a custom rom override an another different custom kernel??
dubstepturtle said:
How can one confirm if a custom rom override an another different custom kernel??
Click to expand...
Click to collapse
Nitrogen os loads the default Nitrogen kernel governors like impulse. No other ROMs which I know don't have this problem. Nitrogen dev keeps changing things.
Denis:) said:
No..
You need latest v2.79sr3
Click to expand...
Click to collapse
ok, Thanks
bhatt095 said:
Nitrogen os loads the default Nitrogen kernel governors like impulse. No other ROMs which I know don't have this problem. Nitrogen dev keeps changing things.
Click to expand...
Click to collapse
is there any good option for battery other than Nitrogen OS? i've tried LOS and it's great but some substratum themes do not work there.
Also can i flash the new ROM without wipind data to not lose all apps data?
LawlietPhoenix said:
ok, Thanks
is there any good option for battery other than Nitrogen OS? i've tried LOS and it's great but some substratum themes do not work there.
Also can i flash the new ROM without wipind data to not lose all apps data?
Click to expand...
Click to collapse
Have you tried Umangs LineageOS? https://forum.xda-developers.com/redmi-note-3/how-to/unofficial-lineageos-substratum-radon-t3592853 Its very smooth, good battery life (for me at least) and have had no issues with substratum. I recently switched from Nos myself, and glad I did. Also if your upgrading from the same rom you don't need to wipe data unless told to
Hemphiz said:
Have you tried Umangs LineageOS? https://forum.xda-developers.com/redmi-note-3/how-to/unofficial-lineageos-substratum-radon-t3592853 Its very smooth, good battery life (for me at least) and have had no issues with substratum. I recently switched from Nos myself, and glad I did. Also if your upgrading from the same rom you don't need to wipe data unless told to
Click to expand...
Click to collapse
if i upgrade i know i don't have too but if i change from NOS to this one can i not wipe data? i hate reistalling all the apps everytime
LawlietPhoenix said:
if i upgrade i know i don't have too but if i change from NOS to this one can i not wipe data? i hate reistalling all the apps everytime
Click to expand...
Click to collapse
If it's a different rom then yes. You will need a clean install. But remember you don't have to wipe internal storage. The more you flash roms the quicker your restoring will get. But I do feel you. It's quite tedious
yeah it's kinda something i hate to do: thanks :highfive:
Take backup of the app's with titanium backup. Don't erase the internal memory, as it doesn't matter.
Ohh poor u guys, just because the cpu gov of some custom kernels doesn't implemented on rom, you blaming nos that much. I feel sorry for your stupidity, and recklessness.
Anyway, all you guys need to learn how scripts or something works on rom. Since nos rom use init.qcom.post_boot.sh as script commands, so basically there is a command that will force the cpu configuration back to stock at booting if the governor selected was interactive, also there are others configuration to that will be necessary at booting. In short, I just edited that script so nos will support custom kernel, tested using every custom kernel. Just make sure that u replace the file everytime you update rom.
Replace it in /system/etc and set permission to rwrr/0644. Oh, and remove .txt ext, I'm to lazy to make flashable zip.
arifreggit said:
Ohh poor u guys, just because the cpu gov of some custom kernels doesn't implemented on rom, you blaming nos that much. I feel sorry for your stupidity, and recklessness.
Anyway, all you guys need to learn how scripts or something works on rom. Since nos rom use init.qcom.post_boot.sh as script commands, so basically there is a command that will force the cpu configuration back to stock at booting if the governor selected was interactive, also there are others configuration to that will be necessary at booting. In short, I just edited that script so nos will support custom kernel, tested using every custom kernel. Just make sure that u replace the file everytime you update rom.
Replace it in /system/etc and set permission to rwrr/0644. Oh, and remove .txt ext, I'm to lazy to make flashable zip.
Click to expand...
Click to collapse
Thanks but no thanks. I'm glad Nos went full ass backwards as now I'm on much better rom
Hemphiz said:
Thanks but no thanks. I'm glad Nos went full ass backwards as now I'm on much better rom
Click to expand...
Click to collapse
Don't worry even if u replace it, It doesn't change anything on stock setting. Every thing will be normal.
arifreggit said:
Ohh poor u guys, just because the cpu gov of some custom kernels doesn't implemented on rom, you blaming nos that much. I feel sorry for your stupidity, and recklessness.
Anyway, all you guys need to learn how scripts or something works on rom. Since nos rom use init.qcom.post_boot.sh as script commands, so basically there is a command that will force the cpu configuration back to stock at booting if the governor selected was interactive, also there are others configuration to that will be necessary at booting. In short, I just edited that script so nos will support custom kernel, tested using every custom kernel. Just make sure that u replace the file everytime you update rom.
Replace it in /system/etc and set permission to rwrr/0644. Oh, and remove .txt ext, I'm to lazy to make flashable zip.
Click to expand...
Click to collapse
Im on nitrogen os oreo with radon kernel and wondering why i get only 6-6.5 sot where i would get easily 8-10 hrs sot.
I just implementesd what you said copied the file without the txt extension with permissions as 0644.
You think it'll help increasing the battery backup as i would get easily more on other roms with this kernel, thanks in advanced anyway
Edit the max frequency for the big cluster is being limited to 1382mhz and not going to 1843 as on my kezo ill check the file
arifreggit said:
Ohh poor u guys, just because the cpu gov of some custom kernels doesn't implemented on rom, you blaming nos that much. I feel sorry for your stupidity, and recklessness.
Anyway, all you guys need to learn how scripts or something works on rom. Since nos rom use init.qcom.post_boot.sh as script commands, so basically there is a command that will force the cpu configuration back to stock at booting if the governor selected was interactive, also there are others configuration to that will be necessary at booting. In short, I just edited that script so nos will support custom kernel, tested using every custom kernel. Just make sure that u replace the file everytime you update rom.
Replace it in /system/etc and set permission to rwrr/0644. Oh, and remove .txt ext, I'm to lazy to make flashable zip.
Click to expand...
Click to collapse
Where i want to put it can you send ss for it
Is there any way to install second ROM? I want to have miui as based ROM and lineage as a second one. Please help.
Hope you guys find a solution.
Dual boot patcher doesn't work for me, it crashes when I click "ROMs"
bencio3 said:
Is there any way to install second ROM? I want to have miui as based ROM and lineage as a second one. Please help.
Hope you guys find a solution.
Dual boot patcher doesn't work for me, it crashes when I click "ROMs"
Click to expand...
Click to collapse
Think deep , make up a decision.
Choose one of those ROM to use as daily driver.
If you felt wanting to change.
Just restore the backup of your previous ROM or ..
... just probably use another ROM
(i just want to say that, if DUAL BOOT PATCHER doesnt work then you might need to choose a single ROM to use)
Lineage OS 16 For Xperia X [Treble]Based on Sony Open DevicesI am not responsible for bricked devices, dead SD cards,.Suitable for F5121 and F5122Reboot after your first boot please!
Opinional files:
Disable ForceEncrypt:Link
Required files:
[Tested]
V20190323:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v6_loire.zip
[OEM-Files]
Download Link
How to flash
Read README.txt in zip file please.
Optional step If you want to use a GSI
Flash a GSI compatible System image and boot!
Code:
fastboot flash system < Path of GSI-System.img >
Because of Anti-Rollback, If you want to Use GSI, You need to choose the same or newer one as the treble build date.
Update and known BUG:
V20190323:
Bugs:
1. Quick Charge is broken, you can use computer USB port charge.
2. Camera doesn't work on first boot, you need to reboot.
Source Codes
Sjll Script
Contributors
Sjll @infixremix
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Testing
Created 2019-03-31
Last Updated 2019-03-31
I've used your Treble Pie for a while and it's awesome. Gotta try this as well. Thanks a lot for all the work!
P/s: Can you make a custom overclocked kernel for your Pie ROMs? I've been using Extreme Kernels (for stock Oreo) and they are amazing. I wonder if Pie can also get a similar kernel.
Yeah bro thanks for this work..can you optimize kernel to make sodp rom usable
LOLisLIFE said:
I've used your Treble Pie for a while and it's awesome. Gotta try this as well. Thanks a lot for all the work!
P/s: Can you make a custom overclocked kernel for your Pie ROMs? I've been using Extreme Kernels (for stock Oreo) and they are amazing. I wonder if Pie can also get a similar kernel.
Click to expand...
Click to collapse
lookmanns14 said:
Yeah bro thanks for this work..can you optimize kernel to make sodp rom usable
Click to expand...
Click to collapse
I will try to build a optimize kernel in free time.
Hi,
Can you please help me with the download from the GSI? Where can I get the right file from?
after install, bluetooth and settings tell me that it stops all the time and sim cant be detected. Also there is some encryption so i can't access data or system anymore with twrp... even magisk can't be installed. great...
After running into a ton of errors, I think I've done something wrong. I have a few questions:
1. Where does Disable ForcedEncryption (DFE) go to in the installation process? If I flash the zip before Lineage (or not flasing at all), the phone encrypts itself right on boot. If I flash DFE zip after Lineage, the camera (and all the sensors) die permanently.
2. Regardless of the phone's encryption status, sometimes the phone just fails to recognize all the sensors (except Wifi, battery and GPS). That means no accelerometer, no screen rotation, no compass or light sensor. Rebooting fixes this on Lineage (for a while), but on RR once it occurs all sensors die permanently. Also GPS reception is terrible, as I haven't got a single fix.
Hope anyone who has been using Treble roms could give me an answer. Thanks in advance.
iH8Ecchi said:
After running into a ton of errors, I think I've done something wrong. I have a few questions:
1. Where does Disable ForcedEncryption (DFE) go to in the installation process? If I flash the zip before Lineage (or not flasing at all), the phone encrypts itself right on boot. If I flash DFE zip after Lineage, the camera (and all the sensors) die permanently.
2. Regardless of the phone's encryption status, sometimes the phone just fails to recognize all the sensors (except Wifi, battery and GPS). That means no accelerometer, no screen rotation, no compass or light sensor. Rebooting fixes this on Lineage (for a while), but on RR once it occurs all sensors die permanently. Also GPS reception is terrible, as I haven't got a single fix.
Hope anyone who has been using Treble roms could give me an answer. Thanks in advance.
Click to expand...
Click to collapse
Trust me....its weird (this is what i do with every pie Rom I DONT GUARANTEE SUCCESS ON TREBLE ROMS BECAUSE I WASNT ABLE TO TEST THEM YET)
Flash OEM image which is advertised here
Flash the Rom without anything
Reboot
Go back to recovery by Holding
Power + vol up
Screen turns black= quickly switch to
Power + vol down
Flash disable force encrypt
Reboot
Done!
(Remember to flash anything else that you want)
Some random said:
Trust me....its weird (this is what i do with every pie Rom I DONT GUARANTEE SUCCESS ON TREBLE ROMS BECAUSE I WASNT ABLE TO TEST THEM YET)
Flash OEM image which is advertised here
Flash the Rom without anything
Reboot
Go back to recovery by Holding
Power + vol up
Screen turns black= quickly switch to
Power + vol down
Flash disable force encrypt
Reboot
Done!
(Remember to flash anything else that you want)
Click to expand...
Click to collapse
I only run into these problems on Treble roms. No problem with sensors or encryption with native ones, such as AOSP or Paranoid.
iH8Ecchi said:
I only run into these problems on Treble roms. No problem with sensors or encryption with native ones, such as AOSP or Paranoid.
Click to expand...
Click to collapse
Hmmmmm
Well like that it worked with all pie ROMs that I used
I've been trying to flash this ROM but couldn't flash the Lineage OS Zip file. It says "Zip treble compatibility error!"
"Invalid zip file format!"
can someone please help me out?
Fardin Rehman said:
I've been trying to flash this ROM but couldn't flash the Lineage OS Zip file. It says "Zip treble compatibility error!"
"Invalid zip file format!"
can someone please help me out?
Click to expand...
Click to collapse
Use Twrp-Q (Ask Simeone for Link)
Some random said:
Use Twrp-Q (Ask Simeone for Link)
Click to expand...
Click to collapse
Yeah I have TWRP-Q just need to flash recovery and then try again. Thank you very much for helping
Can anyone please tell me which Gcam can i use on this ROM?
New version of LOS 16 + Treble
This version of LOS is outdated and does not work on latest Treble.
An updated LOS build (with Expanded volume and latest security patch) can be downloaded on this thread and installed over latest Treble.
Since this phone requires arm64 A-only GSIs to boot, the compatible version should be lineage-16.0-2019xxxx-UNOFFICIAL-treble_arm64_avN.img.xz.
Installation tutorial: Click here. Keep in mind that system.img refers to the LOS build above.
Getting Magisk to work: Click here.
iH8Ecchi said:
This version of LOS is outdated and does not work on latest Treble.
An updated LOS build (with Expanded volume and latest security patch) can be downloaded on this thread and installed over latest Treble.
Since this phone requires arm64 A-only GSIs to boot, the compatible version should be lineage-16.0-2019xxxx-UNOFFICIAL-treble_arm64_avN.img.xz.
Installation tutorial: Click here. Keep in mind that system.img refers to the LOS build above.
Getting Magisk to work: Click here.
Click to expand...
Click to collapse
Thanks man the ROM is great! But is it possible to make the camera work like it did on the original Xperia X stock ROM. I mean the camera is pretty dark on all custom ROMs is there any fix for that?
Fardin Rehman said:
Thanks man the ROM is great! But is it possible to make the camera work like it did on the original Xperia X stock ROM. I mean the camera is pretty dark on all custom ROMs is there any fix for that?
Click to expand...
Click to collapse
You can use Chippa_a's Unofficial LOS16 instead. That one has some heating issues and gaming performance might not be optimal (due to CPU throttling), but camera and battery life is almost identical to stock. In fact, I only use Treble LOS as daily driver because I play games on my phone quite a lot.
If you still insist on using Treble however, you can check out Google Camera ports (scroll down a little bit on Treble page). With HDR+ or Night Mode the picture quality is stellar, but taking pictures might be a bit slow. As far as I know it only runs on Treble and Omni.
iH8Ecchi said:
You can use Chippa_a's Unofficial LOS16 instead. That one has some heating issues and gaming performance might not be optimal (due to CPU throttling), but camera and battery life is almost identical to stock. In fact, I only use Treble LOS as daily driver because I play games on my phone quite a lot.
If you still insist on using Treble however, you can check out Google Camera ports (scroll down a little bit on Treble page). With HDR+ or Night Mode the picture quality is stellar, but taking pictures might be a bit slow. As far as I know it only runs on Treble and Omni.
Click to expand...
Click to collapse
Yeah I am using the gcam port and I get pretty good pictures with it but not very good video quality so I guess I'm gonna give it a try to Chippa_a's Unofficial LOS16.