Has anyone tried charging lg v30 with macbook pro charger (61W)?

Has anyone tried charging lg v30 with macbook pro charger (61W)? - LG V30 Questions & Answers

Mac book pro ships with a usb-c charger which has the following power details:
61 W
Input: 100-240V-1.5A
Output: 20.3V--3A (USB PD) or 9V--3A(USB PD) or 5.2V--2.4A
Can we use the mac book pro charger to charge lgv30?

srinathreddib said:
Mac book pro ships with a usb-c charger which has the following power details:
61 W
Input: 100-240V-1.5A
Output: 20.3V--3A (USB PD) or 9V--3A(USB PD) or 5.2V--2.4A
Can we use the mac book pro charger to charge lgv30?
Click to expand...
Click to collapse
As the MacBook pro charger you indicated is USB-PD compatible and Qualcomm QC is also USB-PD compatible you can use said charger just fine. It won't charge your decide any faster than the OEM charger, etc. as the internals regulate the charging and 'tell" the charger how many [email protected] it desires.

srinathreddib said:
Mac book pro ships with a usb-c charger which has the following power details:
61 W
Input: 100-240V-1.5A
Output: 20.3V--3A (USB PD) or 9V--3A(USB PD) or 5.2V--2.4A
Can we use the mac book pro charger to charge lgv30?
Click to expand...
Click to collapse
Yes I have done that....it works fine and has not damaged the battery.

Doelpher said:
Yes I have done that....it works fine and has not damaged the battery.
Click to expand...
Click to collapse
Great! Thanks for confirming.

It won't charge the phone any faster than a 2.4A. The phone has "protection"; it only takes what it expects. The MacBook Pro charger can put out a lot of power, but the USB-C only takes a (relatively) little in.

Related

USB C - HDMI Cable for mate 10 & PRO

Hello,
I have found this comment about the cable :
Note: I tested PC mode with a USB Type-C to HDMI cable I bought on Amazon. Because the Mate 10 and Mate 10 Pro support USB 3.1 it’s technically possible that you can screen share to a monitor and charge the device at the same time. I asked Anker if a powered USB hub with HDMI support like this would work, but they said it depends on wiring and whether a hub has been designed to communicate with the Mate 10 or not. I also asked Huawei for clarification, and they have vowed to get back to me on the specifics of what to look out for in a compatible hub. I’ll update the review as more information comes in. Thanks to Bram Peeters for raising this issue.
Source : https://www.androidauthority.com/huawei-mate-10-pro-review-807465/
Is there a HUAWEI reference for this cable ?
Does it need to be HDCP compatible, with Netflix eg ?
Best regards

Hi Pascal... I already tried the desktop mode. Technically any type-c to hdmi adapter should work. I'm using this: https://www.incipio.com/chargers/usb-c/usb-c-digital-av-multiport-adapter.html ... and I added an HDMI to VGA cable adapter because there's a VGA cabled monitor at home that's not in use.
My current setup:
** Mate 10
** Incipio 3-port AV adapter
++ Logitech 2 in 1 wireless combo (keyboard and mouse using 1 usb dongle) attached to the 3-port adapter
++ Charger attached to the type-c port
** HDMI to VGA adapter
** monitor
Works without any issues except that the charger cannot push enough power to actually charge the phone. It still drops so probably from 80% you have a good 2 hours average of desktop mode time to perform stuff. I am thinking of getting a DELL type-c to hdmi adapter (just a simple hdmi adapter no extra ports) for playing games.

I got myself a Macbook usb 3.1 dongle ( Lmao ) and i can't seem to push power fast enough to charge my phone, it helps though, having power in drains the battery slower than having no power in

404ErrorUsernameNotFound said:
I got myself a Macbook usb 3.1 dongle ( Lmao ) and i can't seem to push power fast enough to charge my phone, it helps though, having power in drains the battery slower than having no power in
Click to expand...
Click to collapse
In fact, few months ago, i was looking for a USB C HUB (With or not HDMI, Ethernet) with power delivery,
for an ACER SWITCH V10 (2017), to connect many external USB HDD and KEYS.
I have found many products on Amazon.
And these products (USB C HUB) like EgoIggo HUB USB C (GN30E) on Amazon, could be fully adapted
with a Mate 10 PRO. Some of them are too Mac OS X or/and Windows compatible, with or not drivers.
Look the description :
[Multi-operation] 3 USB 3.0 ports, 2 Card Readers for SD and micro SD, 1 HDMI Slot, 1 RJ45 Eternet Port and 1 USB Type-C Charging Port. Compatible with new devices equipped with a Type-C USB port.
[High transfer speed] With a data rate of up to 5 Gbps, the three USB 3.0 ports allow you to connect your keyboard, mouse, USB flash drive and external hard drive to the laptop. An SD player and a micro SD player support SD / SDHC / SDXC cards up to 2 TB. An HDMI slot that supports resolutions up to 4K. An RJ45 Ethernet port allows a super-fast internet network up to 1Gbits / s, but also backwards compatible with 10 / 100Mbps
[Unique Design] This Hub is very small and thin, but robust, whose connection cable is properly flexible, which makes the connection very stable. This elegant aluminum-shaped design perfectly matches the style and color of MackBook and MackBook Pro.
[Power Delivery] USB-C Power Delivery (PD) for Macbook Macmini and other USB-C devices, capable of simultaneously transferring data and charging devices.
[Ultra Portable] This hub is packed with a small box of cardboard and well protected by a nice cover that prevents it from scratching your mackbook. Incredibly compact size and very practical to carry everywhere.
Best regards

404ErrorUsernameNotFound said:
I got myself a Macbook usb 3.1 dongle ( Lmao ) and i can't seem to push power fast enough to charge my phone, it helps though, having power in drains the battery slower than having no power in
Click to expand...
Click to collapse
same concern with the incipio that I'm currently using.
From what I see, it will just drain the battery however we use it. Probably faster if we use the same adapter as Pascal's find. If I have the chance I will test Huawei's adapters (they have a different brand of adapter here in the Philippines) - I can try and borrow: see if it CAN push the power enough to charge the phone. But I'm already assuming that it won't.
Given the fact that the type-c port provides 100% of what it's supposed to run on desktop mode, powering the adapter.. powering whatever usb device is plugged in, that power requirement is the one that needs to be addressed.
But overall not bad for a phone especially when you can still use the phone while working on desktop mode. We can't do work on the phone of course but just enough to get a few things done with a screen and keyboard/mouse combo...

Well according to some German website it's stated that the Mate 10 is Compatible with USB [email protected]*2A so we might need to get a USB PD compatible charger to hopefully gain more juice than using draining the battery slowly

404ErrorUsernameNotFound said:
Well according to some German website it's stated that the Mate 10 is Compatible with USB [email protected]*2A so we might need to get a USB PD compatible charger to hopefully gain more juice than using draining the battery slowly
Click to expand...
Click to collapse
probably if we use an adapter with a type-c slot going to the type-c port of the hdmi/type-c adapter....
I was looking at the Tronsmart multiport charger I think. It has a type-c port so you can use a type-c to type-c cable... BUT it only pushes out as fast charge on the mate 9... so of course that's also a fast charge on the mate 10... BUT again, that's if we plug the phone directly to the charger... would that be a different case if we plug it to the hdmi adapter? I'm actually planning to buy it.. just so I have a multiport adapter especially when out and about. This one says Power Delivery.. probably I'll grab this thing by end of the month and the type-c end to end cable...
http://www.tronsmart.com/products/tronsmart-u5p-60w-usb-pd-desktop-charger-with-voltiq
hopefully I can report back as soon as I get it.
current dilemma is we have a super charge adapter... and yet it's not pushing enough juice... hopefully the type-c type-c scenario works so we won't have draining issues...

***** UPDATE *****
CORRECTION ON THE BRAND...
I was referring to Anker and yes the idea for Power Delivery appears to work.
https://www.anker.com/products/variant/PowerPort%2B-5-Ports-USB-C-/A2053111
Still using my desktop mode original setup:
Mate 10 - Incipio 3-port adapter (type-c/hdmi/regular usb) - hdmi to vga adapter (vga cable LED monitor) - TYPE-C to TYPE-C cable going to the new Anker desktop charger (type-c port is Power Delivery capable) ....
Phone shows FAST CHARGING instead of just charging...
https://imgur.com/a/V7qII
Started around 68% now I'm at 74%. So I guess that should be the solution. Just grab a PD (power delivery) capable charger. The one from Tronsmart should work without issues as well.
Cheers guys!:good:

Baseus O HUB Type-C multi-function converter Adapter
Hi, I'm using a mate 10 and I've just bought a Baseus O HUB Type-C multi-function converter Adapter (HDMI + Type-c charging port + USB3.0). Can't seems to get it to work (PC mode or mirror) when connected to HDMI (tried on Panasonic LED TV & Toshiba projector).
Wireless mouse and keyboard working and phone is charging when I've plug in the charger to the hub. Is there any setting that I've missed?

Regarding Desktop mode: I bought an adapter and successfully connected my mate 10 to an HD TV, but the resolution is low, does it depend on the TV, the cable, the adapter or there is a way to set the desktop mode resolution? I haven't found it ...

drkprd said:
CORRECTION ON THE BRAND...
I was referring to Anker and yes the idea for Power Delivery appears to work.
https://www.anker.com/products/variant/PowerPort%2B-5-Ports-USB-C-/A2053111
Still using my desktop mode original setup:
Mate 10 - Incipio 3-port adapter (type-c/hdmi/regular usb) - hdmi to vga adapter (vga cable LED monitor) - TYPE-C to TYPE-C cable going to the new Anker desktop charger (type-c port is Power Delivery capable) ....
Phone shows FAST CHARGING instead of just charging...
https://imgur.com/a/V7qII
Started around 68% now I'm at 74%. So I guess that should be the solution. Just grab a PD (power delivery) capable charger. The one from Tronsmart should work without issues as well.
Cheers guys!:good:
Click to expand...
Click to collapse
so standard Mate 10 Pro charger (which says fast charging when plugged into phone) doesnt fast charge the phone when connected to the USB Hub. But youre saying if i buy this Anker charger my phone will fast charge when connected to a USB hub?
What is the exact spec of that Anker charger that makes it different to the Huawei charger in the box? Sorry for confusion, thanks in advance.

pixielott46 said:
so standard Mate 10 Pro charger (which says fast charging when plugged into phone) doesnt fast charge the phone when connected to the USB Hub. But youre saying if i buy this Anker charger my phone will fast charge when connected to a USB hub?
What is the exact spec of that Anker charger that makes it different to the Huawei charger in the box? Sorry for confusion, thanks in advance.
Click to expand...
Click to collapse
Anker desktop charger that I'm using: https://www.anker.com/products/variant/PowerPort%2B-5-Ports-USB-C-/A2053111
It has Power Delivery - which powers most usb-c devices nowadays especially Macs and other Google devices if I got that correct.
The description has this:
USB Type-C, Premium 5-Port 60W USB Wall Charger with Power Delivery for Apple MacBook, Nexus 5X / 6P and PowerIQ for iPhone, iPad, Samsung & More
The stock charger will definitely work without problems IF DIRECTLY attached to the phone but this time we have an external device - the multi-port hdmi/type-c/usb adapter. Yes it has a type-c port included and you can attach the stock charger but from my experience especially with the Incipio adapter, it requires more "push" because the stock charger just slows down the drain when using desktop mode. It does not increase the phone's battery juice while in use.
:angel:
** Also, Huawei stock supercharger adapter pushes 22.5W of power BUT ONLY if connected directly to phone. Power delivery pushes 29W of power REGARDLESS of which device it's connected to. The Huawei charger is also picky so it might not be using all 22.5W if connected to an in-between adapter.

drkprd said:
Anker desktop charger that I'm using: https://www.anker.com/products/variant/PowerPort%2B-5-Ports-USB-C-/A2053111
It has Power Delivery - which powers most usb-c devices nowadays especially Macs and other Google devices if I got that correct.
The description has this:
USB Type-C, Premium 5-Port 60W USB Wall Charger with Power Delivery for Apple MacBook, Nexus 5X / 6P and PowerIQ for iPhone, iPad, Samsung & More
The stock charger will definitely work without problems IF DIRECTLY attached to the phone but this time we have an external device - the multi-port hdmi/type-c/usb adapter. Yes it has a type-c port included and you can attach the stock charger but from my experience especially with the Incipio adapter, it requires more "push" because the stock charger just slows down the drain when using desktop mode. It does not increase the phone's battery juice while in use.
:angel:
** Also, Huawei stock supercharger adapter pushes 22.5W of power BUT ONLY if connected directly to phone. Power delivery pushes 29W of power REGARDLESS of which device it's connected to. The Huawei charger is also picky so it might not be using all 22.5W if connected to an in-between adapter.
Click to expand...
Click to collapse
hi, thanks for your detailed reply. the edit with the wattage is especially useful. one last question. Does the Anker charger "fast-charge" the huawei mate 10 pro when connected directly? or just standard usb charging?
If yes, i will replace my huawei official charger with this anker one. handy that it has some usb ports as well so i can charge my bicycle lights overnight etc as well
thanks in advance for the further information

pixielott46 said:
hi, thanks for your detailed reply. the edit with the wattage is especially useful. one last question. Does the Anker charger "fast-charge" the huawei mate 10 pro when connected directly? or just standard usb charging?
If yes, i will replace my huawei official charger with this anker one. handy that it has some usb ports as well so i can charge my bicycle lights overnight etc as well
thanks in advance for the further information
Click to expand...
Click to collapse
that's one of the things I actually was surprised with and didn't really expect...really good news for us because it does!! The phone registers FAST CHARGING even if I have "everything" connected for desktop mode.
* phone + incipio type-c hdmi usb combo
* incipio + hdmi-vga converter
* vga converter + vga led monitor
* Anker multi-port with type-c power delivery + anker type-c to type-c cord ..... connected to the incipio
** and a recent addition: since the incipio only has 1 regular USB port, I bought a 4-port usb hub... connected it to the incipio so that basically splits 1 into 4 usb ports... I attached my wireless keyboard/mouse combo and my Western Digital 1 Terabyte external HDD...... NO PROBLEMS WHATSOEVER.... haha!.. phone still chargers UP with fast charging indication...
Now I guess I have a full working desktop system with the mate 10
(I'm using the regular mate 10 but I guess that shouldn't affect the charge input/output)

drkprd said:
that's one of the things I actually was surprised with and didn't really expect...really good news for us because it does!! The phone registers FAST CHARGING even if I have "everything" connected for desktop mode.
* phone + incipio type-c hdmi usb combo
* incipio + hdmi-vga converter
* vga converter + vga led monitor
* Anker multi-port with type-c power delivery + anker type-c to type-c cord ..... connected to the incipio
** and a recent addition: since the incipio only has 1 regular USB port, I bought a 4-port usb hub... connected it to the incipio so that basically splits 1 into 4 usb ports... I attached my wireless keyboard/mouse combo and my Western Digital 1 Terabyte external HDD...... NO PROBLEMS WHATSOEVER.... haha!.. phone still chargers UP with fast charging indication...
Now I guess I have a full working desktop system with the mate 10
(I'm using the regular mate 10 but I guess that shouldn't affect the charge input/output)
Click to expand...
Click to collapse
Just an FYI to others, the Huawei Mate 10 Pro has 3 different charging modes. One is USB Charging, very very slow. One is Fast charging, like regular charging i guess. SuperCharging is really really fast. This Anker charger only fast charges my device.
I cant get SuperCharge unless I use the Huawei official charger or the Huawei AP09S PowerBank.
How can I SuperCharge with 3rd party accessories?!

pixielott46 said:
Just an FYI to others, the Huawei Mate 10 Pro has 3 different charging modes. One is USB Charging, very very slow. One is Fast charging, like regular charging i guess. SuperCharging is really really fast. This Anker charger only fast charges my device.
I cant get SuperCharge unless I use the Huawei official charger or the Huawei AP09S PowerBank.
How can I SuperCharge with 3rd party accessories?!
Click to expand...
Click to collapse
To understand the chargin technologies one must understand how Watts Volts and Ampere work. Volt x Ampere = Watt. Explaining Volt and Ampere is kinda long story but to keep it short: Imagine a garden hose: The pressure of the water is Volt, the speed of the water is Ampere. Watt is the amount of water thats pouring out.
There are various technologies for charging, in the end it matter how many Watts there are. But different combinations of Volts and Ampere are possible to achieve the same amount of Watts.
There is a new universal standard called Power Delivery which was introduced with USB 3.1 Type C. So this is a standard that comes with usb 3.1 type c and that is why all the new usb3.1 type c laptops support it. (PD supports multiple protocols (combinations of V and A to reach up to 100W) and the more powerful ones mostly support the lower ones too. that means a 100W PD charging brick could charge a 5Vx3A=15W Phone, a 14Vx2A=28W iPad Pro, a 60W Macbook, an 80W Ultrabook etc.)
Previous Charging standards are something around 5V and 1A,2A, computer usb 2.0 ports only give 0.5A and usb3.0 ports give 1A, which is why some laptops have a dedicated phone charging port that delivers 2A (most phones used 5V/2A before fast charging technologies hit the market, it is also the protocol phones fall back to if the charging brick does not support the fast charging technology of the phones manufacturer)
Phone manufacturers have their own technoligies or license them from other companies. Qualcom has QuickCharge which many smartphones use (Samsung uses QuickCharge 2.0 with 9V and 1,67A (Delivers roughly 15W))
Huawei has its own SuperCharge which is based on 5V/4A and 4,5V/5A (delivers around 22W). So in order to use supercharge you have to get a charging brick that explicitely supports 4,5V/5A protocol and a cable that supports 5A (since standard USB 3.1 Type C Power Delivery protocols are based on a maximum of 3A most usb-c cables dont support 5A).
So as i mentioned before: more powerful charging bricks usually support less powerful protocols. so in order to charge devices that do not support the specific fast chargind protocol, all chargers also support 5V2A. Thats what happens if a Samsung is charged with huawei brick or my mate 10 pro is charged with the samsung brick (the difference being that Huawei seems to label the usb 3.0 pc port 5V/1A as "charging", the normal 5V/2A as fast charging and the Huawei SuperCharge at 4,5V/5A obviously is called SuperCharge). USB Power Delivery aims to end that by providing a standard that is available for all that use a 3.1 type c port. (that means if i have a 60W apple chargin brick for my macbook i can also use the same brick to charge my 29W ipad pro or another 60W usb type c ultrabook with windows with the same brick and cable without thinking twice. before usb type c and PD all laptops had to have dedicated chargers)

enricomemo said:
Regarding Desktop mode: I bought an adapter and successfully connected my mate 10 to an HD TV, but the resolution is low, does it depend on the TV, the cable, the adapter or there is a way to set the desktop mode resolution? I haven't found it ...
Click to expand...
Click to collapse
Hi enrico. I have exactly the same issue and it seems like its related to the 4K TV only. FHD TV work fine with my mate 10 pro but when I connect it to 4K TV it sticks to 640*480 resolution, which is useless obviously. Have you found a solution or anyone else ?

Karl212 said:
Hi enrico. I have exactly the same issue and it seems like its related to the 4K TV only. FHD TV work fine with my mate 10 pro but when I connect it to 4K TV it sticks to 640*480 resolution, which is useless obviously. Have you found a solution or anyone else ?
Click to expand...
Click to collapse
My TV isn't 4k and I too get the 640*480 resolution

Connorsdad said:
My TV isn't 4k and I too get the 640*480 resolution
Click to expand...
Click to collapse
What is the model of your TV ? Maybe its a model-related issue (not the native resolution), I tried with a hdmi 2.0 cable and the problem is still here. I own a samsung 55MU7000.

drkprd said:
CORRECTION ON THE BRAND...
I was referring to Anker and yes the idea for Power Delivery appears to work.
https://www.anker.com/products/variant/PowerPort+-5-Ports-USB-C-/A2053111
Still using my desktop mode original setup:
Mate 10 - Incipio 3-port adapter (type-c/hdmi/regular usb) - hdmi to vga adapter (vga cable LED monitor) - TYPE-C to TYPE-C cable going to the new Anker desktop charger (type-c port is Power Delivery capable) ....
Phone shows FAST CHARGING instead of just charging...
https://imgur.com/a/V7qII
Started around 68% now I'm at 74%. So I guess that should be the solution. Just grab a PD (power delivery) capable charger. The one from Tronsmart should work without issues as well.
Cheers guys!:good:
Click to expand...
Click to collapse
You getting much heat on the device I've used Samsung dex before and the S8 got warm but not very, I'm using the Mate 10 and the Dex hub which charges fast but phones gets quite hot using easy projection

Fast charging USB C PD power banks?

I bought this power bank: https://www.amazon.com/gp/product/B01LRQDAEI/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Unfortunately, it doesn't fast charge my Mate 10 Pro. I have a USB C PD car charger and wall charger, both of which work fine and fast charge properly. (Tried multiple cables too). I'm wondering if there's some negotiation issue because this power bank has a bidirectional USB C port (i.e. you also charge the power bank via USB C).
I'm gonna try this one next: https://www.amazon.com/gp/product/B075NXR2T4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Anyone know of a USB C PD power bank that works?

https://www.ebay.com/itm/HUAWEI-Two...e=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649
https://www.amazon.de/gp/product/B077TB39W5/ref=ox_sc_act_title_1?smid=A3JWKAKR8XB7XF&psc=1
They may not deliver to your location

Hmm those would indeed probably work. I'm really looking for something that supports USB PD so it will work with all my other devices though...

The Mate 10 pro is not USB PD compliant.
You can kind of "quick charge" it by using a non standard charging protocol, like 9V 1,5A, but truly "supercharger" at 5V 5A, only with a Huawei supercharger device / cable.
So probably the other chargers you have support other proprietary 10 and 15w solutions that your power bank doesn't.

Luinwethion said:
The Mate 10 pro is not USB PD compliant.
You can kind of "quick charge" it by using a non standard charging protocol, like 9V 1,5A, but truly "supercharger" at 5V 5A, only with a Huawei supercharger device / cable.
So probably the other chargers you have support other proprietary 10 and 15w solutions that your power bank doesn't.
Click to expand...
Click to collapse
So I ended up buying a USB C power meter. Despite the phone not supporting USB PD, as you claim, it negotiates 16W (9Vx1.8A) from all four charging devices I've tried. But for some reason the power banks don't activate fast charging, while the chargers do... I'm not sure where all the current is going, if not the battery.
FWIW, ugreen seems to think USB PD is supported: https://www.ugreen.com/news/186-en.html

kaysond said:
So I ended up buying a USB C power meter. Despite the phone not supporting USB PD, as you claim, it negotiates 16W (9Vx1.8A) from all four charging devices I've tried. But for some reason the power banks don't activate fast charging, while the chargers do... I'm not sure where all the current is going, if not the battery.
FWIW, ugreen seems to think USB PD is supported: https://www.ugreen.com/news/186-en.html
Click to expand...
Click to collapse
Luinwethion said:
You can kind of "quick charge" it by using a non standard charging protocol, like 9V 1,5A, but truly "supercharger" at 5V 5A, only with a Huawei supercharger device / cable.
Click to expand...
Click to collapse
I never said that the Mate wouldn't charge a faster rates, I said it isn't PD compliant, if it was USB-PD compliant, you'd get 22W.
Most chargers / power bank have compatibility for the until now used "broken" quick charging protocols, just because most devices don't support PD as of right now.
I wished the Mate would have support for PD, this would also mean fast charging and data stream at the same time (by using a dock), but try and plugging a dock that's USB-PD compliant (like the many found for the MacBooks) and plug a USB device or a HDMI cable and charging speeds drops significantly.

Luinwethion said:
I never said that the Mate wouldn't charge a faster rates, I said it isn't PD compliant, if it was USB-PD compliant, you'd get 22W.
Most chargers / power bank have compatibility for the until now used "broken" quick charging protocols, just because most devices don't support PD as of right now.
I wished the Mate would have support for PD, this would also mean fast charging and data stream at the same time (by using a dock), but try and plugging a dock that's USB-PD compliant (like the many found for the MacBooks) and plug a USB device or a HDMI cable and charging speeds drops significantly.
Click to expand...
Click to collapse
What makes you think it doesn't support PD? It's obviously negotiating power somehow, and the cable I used doesn't have the D+/D- pins, so it would have to be using some other protocol over USB C...
Also none of this really explains why it's drawing 1.8A off 9V from the power banks, but not fast charging.

kaysond said:
What makes you think it doesn't support PD? It's obviously negotiating power somehow, and the cable I used doesn't have the D+/D- pins, so it would have to be using some other protocol over USB C...
Also none of this really explains why it's drawing 1.8A off 9V from the power banks, but not fast charging.
Click to expand...
Click to collapse
To make terminology clear, we are talking about USB-PD rev. 2, the one found in th Pixel, MacBook, and others right? Not rev 1 or the USB battery charging protocol, those are basically outdated.
Because I see you're using a modified cable and PD rev2 needs a USB-C to C compliant cable, the specifications calls for 4 power & ground pairs and a separated communication bus.
That's why USB-PD rev2 cannot be served via USB-A plug.
Well, why do I say the Mate 10 is not PD compliant, well, take a PD compliant charger, cable and dock, connect it all to the Mate 10 and watch it either charge a 0,5mAh rate or the phone go crazy it will recognize a charger, then say it's disconnected, then say it's connected again, and so on in a continuous loop.
A USB-PD compliant device is able to handle fast charging, data and video output all at one.
I've tested this with various combination of docks, cables and chargers, and none worked... Intimation online is though to find, Huawei's official statement is "our phone supports the best, fastest, safest....." Bla bla bla....
Since most PD rev2 chargers are backwards compatible, you can use them to charge your phone just not at the "optimum rate"... 9v 2A (ish) is the last generation (Huawei P9) Huawei fast charge, and it's mostly the same profile as the Samsung fast charging, QC 2.0 and some other variants, the Mate 10 supports it too at this theoretical of 18W (although I suppose that the speed will be much slower).
The optimum "supercharger speed" is 4.5V 5A, and it's not a standard at all, that's why only Huawei chargers will be able to provide it, I also suppose that there is a lock preventing users from use the dash charger power brick for example.
But back on track, when you said that your phone is not Fast charging, I supposed that you meant that the phone was charging at a really low rate, but is it? I mean what's the difference that you are seeing between your power bank and the other chargers?
Have you tried using a USB-C to C cable from your power bank?

Luinwethion said:
To make terminology clear, we are talking about USB-PD rev. 2, the one found in th Pixel, MacBook, and others right? Not rev 1 or the USB battery charging protocol, those are basically outdated.
Because I see you're using a modified cable and PD rev2 needs a USB-C to C compliant cable, the specifications calls for 4 power & ground pairs and a separated communication bus.
That's why USB-PD rev2 cannot be served via USB-A plug.
Well, why do I say the Mate 10 is not PD compliant, well, take a PD compliant charger, cable and dock, connect it all to the Mate 10 and watch it either charge a 0,5mAh rate or the phone go crazy it will recognize a charger, then say it's disconnected, then say it's connected again, and so on in a continuous loop.
A USB-PD compliant device is able to handle fast charging, data and video output all at one.
I've tested this with various combination of docks, cables and chargers, and none worked... Intimation online is though to find, Huawei's official statement is "our phone supports the best, fastest, safest....." Bla bla bla....
Since most PD rev2 chargers are backwards compatible, you can use them to charge your phone just not at the "optimum rate"... 9v 2A (ish) is the last generation (Huawei P9) Huawei fast charge, and it's mostly the same profile as the Samsung fast charging, QC 2.0 and some other variants, the Mate 10 supports it too at this theoretical of 18W (although I suppose that the speed will be much slower).
The optimum "supercharger speed" is 4.5V 5A, and it's not a standard at all, that's why only Huawei chargers will be able to provide it, I also suppose that there is a lock preventing users from use the dash charger power brick for example.
But back on track, when you said that your phone is not Fast charging, I supposed that you meant that the phone was charging at a really low rate, but is it? I mean what's the difference that you are seeing between your power bank and the other chargers?
Have you tried using a USB-C to C cable from your power bank?
Click to expand...
Click to collapse
Correct. I'm talking about USB PD 2.0. That's interesting, because I don't see the same behavior you're talking about. I wonder if you have a different model? Mine is BLA-A09
All of my charging devices are proper USB C, and support PD 2.0, and I used a marked 100W certified USB C cable. I later used a cable without D+/D- pins to test if its negotiating power using something other than USB PD. Behavior was the same.
This is what I sent to Huawei, and they basically told me the phone is optimized for their own charger. The problem is that despite negotiating, and drawing the same power from all chargers, with the power banks, it does not go into fast charge mode, which you can see from the different charging icon and the longer time to charge.
Device: Nekteck Wall Charger
Link: https://www.amazon.com/gp/product/B0721KG2Q7/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
Maximum Output Power: 65W
Power Delivered to Mate 10 Pro: 9.07V * 1.82A = 16.51W (https://i.imgur.com/ryDJuS0.jpg)
Charging State: Fast Charging (https://i.imgur.com/OYyQ5qK.jpg)
Device: RAVPower 26800mAH Power Bank
Link: https://www.amazon.com/gp/product/B01LRQDAEI/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Maximum Output Power: 30W
Power Delivered to Mate 10 Pro: 9.09V * 1.82A = 16.54W (https://i.imgur.com/8N42dyd.jpg)
Charging State: Regular Charging (https://i.imgur.com/mz9XHz1.jpg)
Device: iMuto 20100mAH Power Bank
Link: https://www.amazon.com/gp/product/B075NXR2T4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Maximum Output Power: 45W
Power Delivered to Mate 10 Pro: 8.98V * 1.82A = 16.34W (https://i.imgur.com/hbUTmYD.jpg)
Charging State: Regular Charging (https://i.imgur.com/364ADEe.jpg)
Device: Nekteck Car Charger
Link: https://www.amazon.com/gp/product/B075WQQG7C/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Maximum Output Power: 45W
Power Delivered to Mate 10 Pro: ~16.5W
Charging State: Fast Charging
(Saitech Power Meter: https://www.amazon.com/gp/product/B01MT8MC3N/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1)

kaysond said:
Correct. I'm talking about USB PD 2.0. That's interesting, because I don't see the same behavior you're talking about. I wonder if you have a different model? Mine is BLA-A09
All of my charging devices are proper USB C, and support PD 2.0, and I used a marked 100W certified USB C cable. I later used a cable without D+/D- pins to test if its negotiating power using something other than USB PD. Behavior was the same.
This is what I sent to Huawei, and they basically told me the phone is optimized for their own charger. The problem is that despite negotiating, and drawing the same power from all chargers, with the power banks, it does not go into fast charge mode, which you can see from the different charging icon and the longer time to charge.
Device: Nekteck Wall Charger
Link: https://www.amazon.com/gp/product/B0721KG2Q7/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
Maximum Output Power: 65W
Power Delivered to Mate 10 Pro: 9.07V * 1.82A = 16.51W (https://i.imgur.com/ryDJuS0.jpg)
Charging State: Fast Charging (https://i.imgur.com/OYyQ5qK.jpg)
Device: RAVPower 26800mAH Power Bank
Link: https://www.amazon.com/gp/product/B01LRQDAEI/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Maximum Output Power: 30W
Power Delivered to Mate 10 Pro: 9.09V * 1.82A = 16.54W (https://i.imgur.com/8N42dyd.jpg)
Charging State: Regular Charging (https://i.imgur.com/mz9XHz1.jpg)
Device: iMuto 20100mAH Power Bank
Link: https://www.amazon.com/gp/product/B075NXR2T4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Maximum Output Power: 45W
Power Delivered to Mate 10 Pro: 8.98V * 1.82A = 16.34W (https://i.imgur.com/hbUTmYD.jpg)
Charging State: Regular Charging (https://i.imgur.com/364ADEe.jpg)
Device: Nekteck Car Charger
Link: https://www.amazon.com/gp/product/B075WQQG7C/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Maximum Output Power: 45W
Power Delivered to Mate 10 Pro: ~16.5W
Charging State: Fast Charging
(Saitech Power Meter: https://www.amazon.com/gp/product/B01MT8MC3N/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1)
Click to expand...
Click to collapse
Ah clear, the iconography is a bit different on my device, must be just a firmware difference.
Your phone is drawing the same amount of power mostly, the charging rate should be very similar.
What about something like ampere or accu battery to check the estimated charging rate?
There are specialized devices for checking the negotiation between both devices, I suppose that it's just a question of a different chipset not triggering the fast charging status in de kernel.
Ps: my phone charges normally, I just that when connected to a dock, sadly it can't charge at more than 2,5W (at most 4w), because it isn't compatible with the newest standard that allows for double role data and power.

Luinwethion said:
Ah clear, the iconography is a bit different on my device, must be just a firmware difference.
Your phone is drawing the same amount of power mostly, the charging rate should be very similar.
What about something like ampere or accu battery to check the estimated charging rate?
There are specialized devices for checking the negotiation between both devices, I suppose that it's just a question of a different chipset not triggering the fast charging status in de kernel.
Ps: my phone charges normally, I just that when connected to a dock, sadly it can't charge at more than 2,5W (at most 4w), because it isn't compatible with the newest standard that allows for double role data and power.
Click to expand...
Click to collapse
Good suggestion. I used accu battery and compared charging between battery and wall charger for 5min at around the same battery %. They're charging at exactly the same rate. So it's just some kind of UI bug that's showing the wrong icon and charge time... Now how do I get them to fix it?
That is a bummer that dual power+data is not supported!

There was a Chinese website which published some USB PD charging tests with the Huawei Mate 10. 28 different chargers were tested. I can't recall the URL offhand.
IIRC, general conclusion from their tests was that the Mate 10 could draw 9V 2A from most USB PD chargers. And that the Mate 10 only accepts 9V input voltage for USB PD fast charging.
---------- Post added at 03:44 AM ---------- Previous post was at 03:31 AM ----------
Here's the link (remove spaces below). Use Google Chrome to translate to English.
www . chongdiantou . com / wp / archives / 19467.html

Does the M5 have Quick Charge or not?

When I say Quick Charge, I mean proper QC technology, not some "quick" or "fast" charging method unique to Huawei only.
The stock charger says [email protected] or [email protected] QC2 and 3 can do [email protected] However when I put the M5 onto my QC3 charger, it only draws [email protected] as tested with a cable with V/A reading.
Charger and cable had been tested to work at proper QC power with my ZTE Axon 7, drawing 18W and also a Moto G4 Turbo Charging.
The strange thing is, if there is some "special" Huawei only technology on the stock charger, it still charges my Axon 7 and G4 with "standard" QC3. Anyone has been successful charging their M5 on a standard QC2/3 charger?

Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.

Michaelflat1 said:
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Click to expand...
Click to collapse
Tried it with screen on or off, and even with the M5 off, still 10W on a non stock QC3 charger.
Cable definitely works for quick charge because I used the same cable on the stock charger and it reads 18W, so it is not blocking anything.

I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M

Obveron said:
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Click to expand...
Click to collapse
Yes, 2 lighting symbol means QCing. However it does not show on my non stock QC charger. My other QC-able devices does on both that charger and the Huawei stock one, strange.

Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.

Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
This is what I use: http://amzn.eu/cLL0gg9
Cable shouldn't matter for QC and proven not to matter as I used the same random cable (and also the cable with the V/A meter) on this charger and the stock charger. It QC my M5 and Axon 7 on the stock charger but only QC my phone on the Aukey charger.
I have a USB C charger ordered, will see if that works better with the M5.

Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
I had since discovered that Huawei does not use QC standards but their own FCP for fast charge. Some QC chargers have that ability built in, but not all. Time to invest in more chargers I think.

Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.

alvinlwh said:
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
Click to expand...
Click to collapse
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...

almaalma74 said:
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
Click to expand...
Click to collapse
There are many chargers that can QC and FCP at the same time, BUT very few that have 2 or more ports that can do them all at once (or at least FCP+QC on one and QC on the other), just one port and the other one at normal speed. There is a Tronsmart one with 5 ports but it is quite costly.

What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.

StephenMSmith said:
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
Click to expand...
Click to collapse
Not sure what the nexus comes with. However I had tried it with QC3 charger and a USB C PD charger and both just slow charges. Only Huawei original charger or SOME chargers with VoltIQ can fast charge the M5.

plugging in my USB tester proves that actually it takes a 9v 2a charge from original power adapter and cable. Whilst screen is on also.

I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a

Ivanbarker said:
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Click to expand...
Click to collapse
I can confirm that you do not need the original cable for FCP charge. I used a USB 3.0 (blue plug) cable that works with QC3 for FCP and this is confirmed by a USB V/A meter.

I think Huawei has their own standard. Some of my QC 2 chargers work, some don't using the same cable.

Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?

StephenMSmith said:
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
Click to expand...
Click to collapse
Huawei FCP is [email protected]=18W or [email protected]=22.5W. Not sure which one our tablet uses, at work cannot check the actual charger. However when plugged into a QC2/3 charger, it charges at [email protected]=10W. Meaning it will be between 80% to 125% more time with a non FCP charger.

Having just picked up my M5 8.4, confirm my PD charger is (apparently) quick charging the device. It says fast charge on the lock screen and I've got the double lightning bolt in the status bar. Score!

Super Fast Car Charger

Has anyone found or used and can confirm a working super fast charger for your car. I've looked around on Amazon, but they don't support PPS. And the ones that do, people connected a meter and saw it was only charging at 15W instead of the 25W as advertised.
Even searched a bit in the Note 10+ section and nobody was able to find one that worked. Others suggested to just get a DC to AC adapter for the car and buy Samsung's 45W wall charger. Samsung also is going to launch a 45W car charger but it just says coming soon and I'm assuming it's going to be priced really high.
https://www.samsung.com/us/mobile/m...es/45w-dual-car-charger-black-ep-l5300xbegus/

it works

anyone have any further info??
I'd like to get stuff ordered for when i get my phone.

Looking too, qc 3.0 works for fast but no super fast.
Got phone yesterday, 45w charger for chrome book charges as fast, 25w charger is faster

Yeah I really don't want to get a power inverter in my car, it's gonna get messy just to plug into an outlet. I tried the car charger I already had that supports QC 3.0, doesn't do super fast charging. Really hoping someone can chime in if they've found one that works

I have been using this with the 45w usb C from samsung and it works
https://www.amazon.com/gp/product/B082ZY5GXX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

rxkelly75 said:
I have been using this with the 45w usb C from samsung and it works
https://www.amazon.com/gp/product/B082ZY5GXX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Ok I just ordered one, thanks. Have you tried using any third party USB c to USB c cables with it?

aroy97 said:
Ok I just ordered one, thanks. Have you tried using any third party USB c to USB c cables with it?
Click to expand...
Click to collapse
I have tried these on the 45w Samsung charger
USB-IF Certified USB C Cable, USB Type C to C Cord, Charging Compatible with MacBook Pro 2018 MacBook Air iPad Pro, Galaxy S9 Note 9, Nintendo Switch, Pixel 3, Power Delivery 100W 4M/12ft - 2 Pack https://www.amazon.com/dp/B078GLZRLY/ref=cm_sw_r_other_apa_i_XhhyEb2DT1Z37

rxkelly75 said:
I have been using this with the 45w usb C from samsung and it works
https://www.amazon.com/gp/product/B082ZY5GXX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Would this enable super quick charging for the standard s20 device?

Super quick charge 2.0 will work with any 100w e-marked cable.

because they use PD 2.0. Samsung use PPS, they are different. you only need a 18w pd charger. you see pps 3.3~11/16=2.25a so that charger can support samsung suppor charger 1.0/2.0

Question Super fast charging 2.0 on Baseus charger

This is the 100W Baseus deskop charger and I have two issues with it:
1. When two USB C ports are used, the power division is C1=65W and C2=30W. So C1 should still be more than capable enough to handle SFC 2.0 45W charging. But as you can see in the video, SFC 2.0 is not working when two USB C ports are used.
2. When I charge at SFC 2.0 and SFC 1.0 with the same charger, they both cap at 33W. I thought SFC 1.0 is just 25W? When I use the official 25W Samsung SFC 1.0 charger, it just caps off at 24W as expected.
Baseus support sucks big time so I'm having a problem reporting this to them.

kevindd992002 said:
This is the 100W Baseus deskop charger and I have two issues with it:
1. When two USB C ports are used, the power division is C1=65W and C2=30W. So C1 should still be more than capable enough to handle SFC 2.0 45W charging. But as you can see in the video, SFC 2.0 is not working when two USB C ports are used.
2. When I charge at SFC 2.0 and SFC 1.0 with the same charger, they both cap at 33W. I thought SFC 1.0 is just 25W? When I use the official 25W Samsung SFC 1.0 charger, it just caps off at 24W as expected.
Baseus support sucks big time so I'm having a problem reporting this to them.
Click to expand...
Click to collapse
Baseus GaN5 Pro 65 watt can charge at 50watt peak.
after 60 percent,watt same as samsung 25 watt charger.

But your measurement is input power to the charger and not output power to the phone. There's a bit of a difference because of power adapter efficiency. I don't know what is the difference between the Gan5 Pro 65W and this 100W adapter really.

BUMP! Anyone please?

This is normal for such a charger. I have a PZOZ version - 65W GaN 2xUSB C + 1xUSB A. SFC 2.0 works only with 1 device plugged in, if you plug another (it might be a 5W one) - this breaks the SFC. I can assume that this is coming from the controller and the device is actually not capable to support such scenario, even though the power is declared as 100W.

Hmmm, that's interesting. I thought the issue was isolated to BaseUS. Their support is really non-existent. They reply but it's like you're talking to a stupid person that does not understand the issue.
Aside from this issue, do you have any other issues when using both ports? As for me, when I charge my phone while my laptop is plugged in, it sometimes drops the wattage on the laptop device to just 19w. If the laptop is plugged in by itself, it goes up to 59w. Not sure what's going on here.
Are there any usb c car chargers that support sfc 2.0?

kevindd992002 said:
Hmmm, that's interesting. I thought the issue was isolated to BaseUS. Their support is really non-existent. They reply but it's like you're talking to a stupid person that does not understand the issue.
Aside from this issue, do you have any other issues when using both ports? As for me, when I charge my phone while my laptop is plugged in, it sometimes drops the wattage on the laptop device to just 19w. If the laptop is plugged in by itself, it goes up to 59w. Not sure what's going on here.
Are there any usb c car chargers that support sfc 2.0?
Click to expand...
Click to collapse

Satechi - USB / USB C car charger with 72W:
Simultaneous Charging: Has both a universal USB A port and a Type-C port
Quick Charge: Devices can be charged quickly on the go
Powerful and compact design: Type-C power 60W (max), Type-A power 12W (max), total 72W
Equipped with an LED indicator to check the charging status
With Power Delivery for particularly fast charging
Compatible with almost all USB devices and most USB Type-C devices
The Satechi USB C and USB A Car Charger is the perfect solution for charging your devices on the go. Never worry about how to charge your smartphone, tablet, computer or other device while on the go. Simply connect the charger to your car's cigarette lighter and connect the other end of the USB cable to the USB port of the desired device. You can already charge your device on the go. Satechi's Dual Car Charger allows you to simultaneously charge a 13" MacBook Pro (2016) via the USB-C port and an iPhone/tablet via the USB-A port. The output power for the USB-C port is 60 W (max) and 12 W for the USB-A port.
ATTENTION: The delivery does not include a USB cable!
Color: white/silver
Brand: Satechi
Model: ST-TCPDCCS
Weight: about 34g
Technical specifications:
Input: DC12V - 24V
USB-C output: 60W (max)
USB A output: 12W (max)
Total Power: 72W
Baseus aluminum 45W USB / USB C car charger:
Charges up to 4 times faster than conventional USB/USB C adapters
Extremely small and light (ideal for travelling)
With support for Power Delivery 3.0 / Quick Charge 4.0
45W output current power
With LED display on the charger
Charge your USB / USB C compatible devices such as smartphones, tablets or MP3 players, etc. in the car now. With the Baseus USB / USB C car charger, your devices are always fully charged while driving. The Baseus Car Charger Auto USB / USB C is ideal for people with active lifestyles who travel a lot. It simply plugs into your vehicle's power outlet (cigarette lighter) and charges while driving.
The power supply also supports the latest Power Delivery 3.0 and Quick Charge 4.0 technologies, with which you can charge your iPhone X up to 50% in just 30 minutes. The car charger always guarantees the maximum charging capacity to charge your electronic devices, with a current output line of up to 6 amps.
ATTENTION: USB/USB C cable not included (can be ordered in store).
The black color
Manufacturer: Baseus
Material: aluminum/plastic
Technical specifications:
Performance/power: 45 watts
Input: 12-24V
USB Output: 4.5V/5A; 5V/4.5A; 9V/3A; 12V/3A; 20V/2.25A
USB-C Output: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/2.25A
Output USB + USB C Total: 5V/6A max

Nmc_alves® said:

S23 Ultra requires 10v 4.5 amp to achieve 45 w charging . Charger and Cable both should be capable of 5 amp current capacity and Charger should support PD 3.0 with PPS at 5 amp that is the basic requirement, Cable should have a e-marker chip to identify it as having 5 amp capacity to the charger. usually such cables have 5 amp written on the USB C port and are visibly thicker than the normal 3 amp cables .

ask77 said:
S23 Ultra requires 10v 4.5 amp to achieve 45 w charging . Charger and Cable both should be capable of 5 amp current capacity and Charger should support PD 3.0 with PPS at 5 amp that is the basic requirement, Cable should have a e-marker chip to identify it as having 5 amp capacity to the charger. usually such cables have 5 amp written on the USB C port and are visibly thicker than the normal 3 amp cables .
Click to expand...
Click to collapse
Do you have any reference for that 10V 4.5A information? Some say it's 9V 5A but I never saw any official claims from Samsung regarding that too. I have no issues with cables. I'm using 100W BaseUS cables with e-marker chips on them. They don't have the 5A writing on them but they are obviously thicker than the included Samsung cable (which is only for 25W charging). Here are the specs of the 100W BaseUS desktop charger that I have:
As you can see, it does support PD3.0. Although PPS is not written there, it does support it as well as confirmed by BaseUS support and the video that I showed. I don't see 10V anywhere though so I'm not sure how it works with PPS or something. Does PPS adjust the voltage with fine adjustments or something? Also, that doesn't explain the issue I'm having where SFC 2.0 won't work when two USB ports are used. It only works when the phone is charged alone and this defeats the purpose of buying a multi-port charger in the first place.

Go to settings, about phone , and then status information the last entry there is Rated 10 V 4.5 Amp . Yes pps adjusts voltage with fine adjustment of 20mv . It can provide between 3.3 V to 21 V at upto 5 Amp . Your problem seems to be related to the charger itself which is unable to deliver the required power when two usb ports are used . BTW you can use an app called accubattery which should give you the exact charging data for your phone.

ask77 said:
Go to settings, about phone , and then status information the last entry there is Rated 10 V 4.5 Amp . Yes pps adjusts voltage with fine adjustment of 20mv . It can provide between 3.3 V to 21 V at upto 5 Amp . Your problem seems to be related to the charger itself which is unable to deliver the required power when two usb ports are used . BTW you can use an app called accubattery which should give you the exact charging data for your phone.
Click to expand...
Click to collapse
Ok, I see that now. Well, @Stenlius replied to this thread and says that this is normal. Any comments on that?
What's more weird though is that when it's charging at sfc 2.0, the cable only shows 33w. When I plug in another device in the charger, it renegotiates to sfc 1.0 but still at 33w!
When I use the official 25w samsung charger with the same cable, it goes down to 24w as expected.

SFC 2.0 - So far I have only seen with the Samsung official chargers. I've spent so much money on Belkin, Baseus, UGreen, Anker accessories and never been able to get peak speeds.

JazonX said:
SFC 2.0 - So far I have only seen with the Samsung official chargers. I've spent so much money on Belkin, Baseus, UGreen, Anker accessories and never been able to get peak speeds.
Click to expand...
Click to collapse
Oh wow, that's good to know. Were you getting around the same wattage as I do at 33W? I still have time to return these and is why I'm asking for help here to verify if I don't have an isolated issue or something.

kevindd992002 said:
Oh wow, that's good to know. Were you getting around the same wattage as I do at 33W? I still have time to return these and is why I'm asking for help here to verify if I don't have an isolated issue or something.
Click to expand...
Click to collapse
Never had the tools to measure the wattage output.
I just plug and wait for SFC 2.0 to show up, and if it doesn't - I just get rid of it.
I've tried 120W Xiaomi chargers as well.
Max anything other than samsung genuine chargers can go up to is "Fast Charging" or super charging 1.0.

JazonX said:
Never had the tools to measure the wattage output.
I just plug and wait for SFC 2.0 to show up, and if it doesn't - I just get rid of it.
I've tried 120W Xiaomi chargers as well.
Max anything other than samsung genuine chargers can go up to is "Fast Charging" or super charging 1.0.
Click to expand...
Click to collapse
Well theh that's not the same case as mine. If you read my OP and watched the video, you'll see that I can do sfc 2.0 with this baseus charger but only maxes at 33 watts. I thought you had the same issue as mine.

kevindd992002 said:
Well theh that's not the same case as mine. If you read my OP and watched the video, you'll see that I can do sfc 2.0 with this baseus charger but only maxes at 33 watts. I thought you had the same issue as mine.
Click to expand...
Click to collapse
peak charging only below 20 percent.
after that 3x watt.
after 60 percent 2x watt,same as 25 watt samsung original charger and cable from the box.(3A cable).
basesus gan 2 lite 65 watt and basesus gan 5 pro 65 watt support SFC 2.0.
tested with S23 Ultra.
this image is s23 ultra at 15 percent battery.
charging with samsung original 45 watt charger.

domperidane said:
peak charging only below 20 percent.
after that 3x watt.
after 60 percent 2x watt,same as 25 watt samsung original charger and cable from the box.(3A cable).
basesus gan 2 lite 65 watt and basesus gan 5 pro 65 watt support SFC 2.0.
tested with S23 Ultra.
this image is s23 ultra at 15 percent battery.
charging with samsung original 45 watt charger.
Click to expand...
Click to collapse
Ok, that makes sense. I'll try charging at 15% and see if it makes it to 48W.
Also, have you tried charging yout s23 ultra with more than one usb port plugged in your charger? That does not work as you see in my video.

kevindd992002 said:
Ok, that makes sense. I'll try charging at 15% and see if it makes it to 48W.
Also, have you tried charging yout s23 ultra with more than one usb port plugged in your charger? That does not work as you see in my video.
Click to expand...
Click to collapse
may be there is a problem with your charger.
you can claim warranty.

domperidane said:
may be there is a problem with your charger.
you can claim warranty.
Click to expand...
Click to collapse
No there is none. I posted on reddit before buying this and one guy posted the same issue. Can you test with yours?

Better Mobile App

welcome