Related
Hi, anyone can upload stock rom of leeco le max 2 x822?
Thanks
AlexRuhl said:
Hi, anyone can upload stock rom of leeco le max 2 x822?
Thanks
Click to expand...
Click to collapse
Check this https://www.frequencycheck.com/models/O07Nd/leeco-x820-le-max-2-dual-sim-td-lte-32gb-x821-x822
It's the same Phone of x820 or x821 you can put all the stock rom on it
I know this but i need x822 rom to resend at seller for fingerprint issue
AlexRuhl said:
Hi, anyone can upload stock rom of leeco le max 2 x822?
Thanks
Click to expand...
Click to collapse
Friend, try this rom before you send back your device :
http://forum.xda-developers.com/le-max-2/development/revolution-21s-eui-5-9-beta-developers-t3493604
I have x822 and fingerprint works very well
Good luck
Don t work for me
anyone could help me?
AlexRuhl said:
anyone could help me?
Click to expand...
Click to collapse
Did you tried stock rom?
I'm using this old release based in mokee rom, and FP work for me (x822)
http://forum.xda-developers.com/le-max-2/development/mokee-lemax2-umbrellateam-spainteam-t3466117
Fabio Bertelli said:
Did you tried stock rom?
I'm using this old release based in mokee rom, and FP work for me (x822)
http://forum.xda-developers.com/le-max-2/development/mokee-lemax2-umbrellateam-spainteam-t3466117
Click to expand...
Click to collapse
i tried 14s, 15s, 15s, 17s, 18s, 21s indian 16s, miui, cm 13 and others.. almmost al roms..
AlexRuhl said:
i tried 14s, 15s, 15s, 17s, 18s, 21s indian 16s, miui, cm 13 and others.. almmost al roms..
Click to expand...
Click to collapse
In some models the fingerprint problem can be partially fixed by a software update. But in some devices like yours it is a hardware problem and can only be repaired back in the factory.
@AlexRuhl, after all, if the fingerprint don't work in any rom, so I believe it's a hardware problem
http://www.needrom.com/download/leeco-x822-le-max2/
in this link you can download the rom and there are the commands to fastboot
The one AlexRuhl posted is the one you need. I tested it flashing without clean and wifi didnt worked. Then did a factory reset and reflashed it again and everything works fine. The splash is cute not like the official chinesse rom. Im saving this but prolly gonna move to 20s. 18s gave me 132000 antutu while 20s enters some high performance mode that does 143500 antutu. Big difference.
In your case id try to do a wipe/factory reset and flash 20s official rom using recovery jus to test if fp is working correctly cos some previous conf. could be interfering with fingerprint. I.e., my problem with wifi, it didnt even turn on ithought it was fried but actually it is ok.
I moddified scripts.bat like this:
Code:
..\tools\fastboot.exe flash ddr ddr.mbn
..\tools\fastboot.exe flash dsp adspso.bin
..\tools\fastboot.exe flash boot boot.img
..\tools\fastboot.exe flash bluetooth BTFM.bin
..\tools\fastboot.exe flash cmnlib cmnlib.mbn
..\tools\fastboot.exe flash cmnlibbak cmnlib.mbn
..\tools\fastboot.exe flash cmnlib64 cmnlib64.mbn
..\tools\fastboot.exe flash cmnlib64bak cmnlib64.mbn
..\tools\fastboot.exe flash devcfg devcfg.mbn
..\tools\fastboot.exe flash devinfo devinfo.bin
..\tools\fastboot.exe flash aboot emmc_appsboot.mbn
..\tools\fastboot.exe flash abootbak emmc_appsboot.mbn
..\tools\fastboot.exe flash hyp hyp.mbn
..\tools\fastboot.exe flash hypbak hyp.mbn
..\tools\fastboot.exe flash keymaster keymaster.mbn
..\tools\fastboot.exe flash keymasterbak keymaster.mbn
..\tools\fastboot.exe flash modem NON-HLOS.bin
..\tools\fastboot.exe flash pmic pmic.elf
..\tools\fastboot.exe flash pmicbak pmic.elf
..\tools\fastboot.exe flash rpm rpm.mbn
..\tools\fastboot.exe flash rpmbak rpm.mbn
..\tools\fastboot.exe flash splash splash.img
..\tools\fastboot.exe flash -S 16M system system.img
..\tools\fastboot.exe flash tz tz.mbn
..\tools\fastboot.exe flash tzbak tz.mbn
..\tools\fastboot.exe flash xbl xbl.elf
..\tools\fastboot.exe flash xblbak xbl.elf
..\tools\fastboot.exe -w
and moved it inside images folder and run from there.
How to flash the non-hlos.bin file via TWRP?
You can not, use fastboot: -
Code:
fastboot flash modem NON-HLOS.bin
I bring you the firmware stock with the February 2018 security patch. Enjoy it.
Link:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip[/url]
Link is broken Access Denied
Edit: Okay, use another VPN. Now it's work!
Link only works on PC's
hello, can you upload it to mega or drive or another download platform.
thank you
ok
thanks, your link could be started downloading by windscribe vpn brazil config
Please upload the stock ROM to drive or mega so that we can download it is hard to download with a vpn
---------- Post added at 10:06 PM ---------- Previous post was at 10:04 PM ----------
Whether it can be flashed on Indian variant xt1795
Works like a charm!
magnet
magnet-URL
rssxda said:
I bring you the firmware stock with the February 2018 security patch. Enjoy it.
Link:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip[/url]
Click to expand...
Click to collapse
Thank you but your link doesn't work for me too.
MONTANA_NPPS26.102-49-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
lohanbarth said:
MONTANA_NPPS26.102-49-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
How could it be this build number NPPS26.102-49-4? I'm also running the February patch but my build number is NPPS26.102-63-1
Can I install this rom?
michael50310 said:
How could it be this build number NPPS26.102-49-4? I'm also running the February patch but my build number is NPPS26.102-63-1
Can I install this rom?
Click to expand...
Click to collapse
hello, what variant do you have?
lohanbarth said:
hello, what variant do you have?
Click to expand...
Click to collapse
I have xt1797, purchased in Taiwan
Hello. How to install it? I have already unlocked Bootloader and what's next?
Danke!
OK done. I used this on my Mac
./fastboot getvar max-sparse-size
./fastboot oem fb_mode_set
./fastboot flash partition gpt.bin
./fastboot flash bootloader bootloader.img
./fastboot flash modem NON-HLOS.bin
./fastboot flash fsg fsg.mbn
./fastboot erase modemst1
./fastboot erase modemst2
./fastboot flash dsp adspso.bin
./fastboot flash logo logo.bin
./fastboot flash boot boot.img
./fastboot flash recovery recovery.img
./fastboot flash system system.img_sparsechunk.0
./fastboot flash system system.img_sparsechunk.1
./fastboot flash system system.img_sparsechunk.2
./fastboot flash system system.img_sparsechunk.3
./fastboot flash system system.img_sparsechunk.4
./fastboot flash system system.img_sparsechunk.5
./fastboot flash oem oem.img
./fastboot erase cache
./fastboot erase userdata
./fastboot erase DDR
./fastboot oem fb_mode_clear
./fastboot reboot
Which retail region is it?
Hello
released boot loader
I rooted with magisk
I put some roms miui, havoc, aosp...........
But when I went back to stock rom, I had no signal and imei 0 on my xt1941-3 deen BR
I downloaded all versions of the RETBR deen, not the version of android 8.1 solved.
link download Roms
https://mirrors.lolinet.com/firmware/moto/deen/official/
I used the commands standards:
Code:
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
I changed the imei using root and substratum with the IMEI CHANGER free.apk, I was able to successfully change the imei, but still no signal.
I have no backup of the EFI folder and when I install the stock rom it does not create this folder.
I downloaded Partitions Backup.apk
I have the partitions:
MODEM1
MODEM2
MODEMST1
MODEMST2
*I downloaded them but I couldn't find the files
.nv_data.bak
.nv_data.bak.md5
and neither the others that are created at each boot nv_data.bin, nv_data.bin.md5 and
.nv_state
I saw some tutorials using WriteDualIMEI (W + G_eMMC) .exe or Qualcomm_Smartphone_Write_IMEI_Tool_v1.01.exe applications but my phone doesn't recognize in the device manager as (qualcomm port com8) appears as (android device, motorola adb interface)
Any tips? Please I need help! lost my cellphone
In this forum of moto g4 explains well, how to proceed, but I do not have the files, if someone can help me, I give a donation.
dhob.bin.bak
https://forum.xda-developers.com/mo...859068&usg=ALkJrhgE4aZYFO7uWHYr-X-2l6ucpltAXg
Does anyone have the lgv60ea version to decompress the modemst1, modemst2, ftm, fsc, fsg partitions in Qualcomm 9008 mode
Which firmware you are interested in ? Please be specific.
kaitian1978 said:
Does anyone have the lgv60ea version to decompress the modemst1, modemst2, ftm, fsc, fsg partitions in Qualcomm 9008 mode
Click to expand...
Click to collapse
I'm sorry, decompress what? https://drive.google.com/drive/folders/1tcSwlTnTWuogLOqaJZsEg4xnymqovqrI?usp=sharing
Leronex_1 said:
I'm sorry, decompress what? https://drive.google.com/drive/folders/1tcSwlTnTWuogLOqaJZsEg4xnymqovqrI?usp=sharing
Click to expand...
Click to collapse
He needs those partitions extracted from the firmware is what he's asking for?What for who knows?lol...