Related
Hello!
Not work radio on Xiaomi Redmi 2 after "fastboot erase modemst".
I reflash via fastboot files:
PHP:
fastboot flash hyp hyp.mbn
fastboot flash tz tz.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash modem NON-HLOS.bin
but it did not help.
Phone does not detect SIM card and displays IMEI 0
What to do?
I tried to flash the radio through via QPST, but "service programming" could not open the phone :crying:
PLEASE, HELP!!!
Return Stock Firmware Moto G5s Plus, relock bootloader android 7.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
installs without errors(bad key).
In Brazil the xt1802 version is sold, I can not guarantee that it will work in another version.
I already tested it on my phone, and I block the boot again.
My thanks is to @shu006 through his topic:https://forum.xda-developers.com/moto-g5s-plus/development/relock-bootloader-moto-g5s-plus-t3681390, to be able to find a rom to relock the boot.
I left a block .bat already with the code and the rom.
Download ANDROIDFILEHOST
Download MEGA
The rom model used was: SANDERS_NPSS26.116-64-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.info
Questions, Suggestions, Errors and etc ... send it to me.
Attempt 1
Code:
fastboot oem lock
fastboot oem lock
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash boot boot.img
fastboot oem lock
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot erase userdata
pause
fastboot reboot
Attempt 2 Update(11/02/18) CODE:
Code:
fastboot oem fb_mode_set
fastboot oem lock
fastboot oem lock
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash boot boot.img
fastboot oem lock
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
pause
fastboot reboot
Attempt 3 Update(19/02/18) CODE:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash boot boot.img
fastboot oem lock
GOOD LUCK!
XDA:DevDB Information
[xt1802][Brazil]Return Stock Firmware Moto G5s Plus, relock bootloader [tested], ROM for the Moto G5S Plus
Contributors
droidfuture
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
Version Information
Status: Stable
Current Stable Version: NPSS26.116-64-2 7.1.1
Stable Release Date: 2018-01-01
Created 2018-02-10
Last Updated 2018-02-10
My warranty will be back? / Terei de volta minha garantia?
Thanks in advance
Aquati said:
My warranty will be back? / Terei de volta minha garantia?
Thanks in advance
Click to expand...
Click to collapse
No
When you asked for unlock code,you lost warranty.
Members who wish to post on XDA are reminded of this Forum Rule:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
How about XT1805 sir? I want to try but I am not sure....
I installed it on a XT1805 and don't have Network.
Edit: It Shows "0" under IMEI (Slot 1) and (Slot 2), so theres the Problem. Investigating further.
Edit 2: Apparently, that was more of a Problem from coming from an Oreo ROM back to a Stock ROM, after going through hell and back, Fixing the IMEI Problem thanks to https://forum.xda-developers.com/moto-g5s-plus/how-to/guide-workaround-network-imei-0-t3745474 this Guide i have now a working Stock ROM.
It is not locked ofc, since i had to Flash the EFS Backup, which is unfortunate. I am not sure what will happen if i reflash the whole Stock ROM again in means of the IMEI.
Thanks for everything =)
thank you very much, great job, everything worked ok
- Moto G5S PLUS XT1801
greenbaby said:
How about XT1805 sir? I want to try but I am not sure....
Click to expand...
Click to collapse
I have reteu xt1805 and worked
Do you success to make your bootloader relock again? Or your XT1805 not yet unlocked bootloader before? My devices status unlocked bootloader now and I am not sure if this is can relock again cause I didn't have original firmware,
greenbaby said:
Do you success to make your bootloader relock again? Or your XT1805 not yet unlocked bootloader before? My devices status unlocked bootloader now and I am not sure if this is can relock again cause I didn't have original firmware,
Click to expand...
Click to collapse
I relocked bootloader nps26.116-61 version,but this also should working for you
Seriosha said:
I installed it on a XT1805 and don't have Network.
Edit: It Shows "0" under IMEI (Slot 1) and (Slot 2), so theres the Problem. Investigating further.
Edit 2: Apparently, that was more of a Problem from coming from an Oreo ROM back to a Stock ROM, after going through hell and back, Fixing the IMEI Problem thanks to https://forum.xda-developers.com/moto-g5s-plus/how-to/guide-workaround-network-imei-0-t3745474 this Guide i have now a working Stock ROM.
It is not locked ofc, since i had to Flash the EFS Backup, which is unfortunate. I am not sure what will happen if i reflash the whole Stock ROM again in means of the IMEI.
Thanks for everything =)
Click to expand...
Click to collapse
U can still relock bootloader just avoid erase modemst1 and 2:
onde tem o tutorial?
tanks....
I could not relock my bootloader .. . Now ,I can update firmware by OTA mode?
que buen aporte podrías explicar si hay alguna forma de recuperar el imei del moto G5s plus te lo agradecería
camilocasd said:
que buen aporte podrías explicar si hay alguna forma de recuperar el imei del moto G5s plus te lo agradecería
Click to expand...
Click to collapse
Please use english only on the forum as expected. On the guide section there are tons of threads with how to get the imei back
droidfuture said:
Return Stock Firmware Moto G5s Plus, relock bootloader android 7.1.1
installs without errors(bad key).
Click to expand...
Click to collapse
Same error as all the other "working relock" threads:
Code:
R:\>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (16384 KB)...
OKAY [ 0.377s]
writing 'boot'...
(bootloader) Image signed with key bad key
bornheim2 said:
Same error as all the other "working relock" threads:
Click to expand...
Click to collapse
It's normal err with unlocked bootloader
Unlocked Bootloader can't verfify signed key in firmware
Adi5 said:
It's normal err with unlocked bootloader
Unlocked Bootloader can't verfify signed key in firmware
Click to expand...
Click to collapse
That would mean that no bootloader could be re-locked ever. Apparently at least the LG G5 can be re-locked.
bornheim2 said:
That would mean that no bootloader could be re-locked ever. Apparently at least the LG G5 can be re-locked.
Click to expand...
Click to collapse
Can be relocked
I relocked IT(had bad key)
I bring you the firmware stock with the February 2018 security patch. Enjoy it.
Link:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip[/url]
Link is broken Access Denied
Edit: Okay, use another VPN. Now it's work!
Link only works on PC's
hello, can you upload it to mega or drive or another download platform.
thank you
ok
thanks, your link could be started downloading by windscribe vpn brazil config
Please upload the stock ROM to drive or mega so that we can download it is hard to download with a vpn
---------- Post added at 10:06 PM ---------- Previous post was at 10:04 PM ----------
Whether it can be flashed on Indian variant xt1795
Works like a charm!
magnet
magnet-URL
rssxda said:
I bring you the firmware stock with the February 2018 security patch. Enjoy it.
Link:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip[/url]
Click to expand...
Click to collapse
Thank you but your link doesn't work for me too.
MONTANA_NPPS26.102-49-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
lohanbarth said:
MONTANA_NPPS26.102-49-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
How could it be this build number NPPS26.102-49-4? I'm also running the February patch but my build number is NPPS26.102-63-1
Can I install this rom?
michael50310 said:
How could it be this build number NPPS26.102-49-4? I'm also running the February patch but my build number is NPPS26.102-63-1
Can I install this rom?
Click to expand...
Click to collapse
hello, what variant do you have?
lohanbarth said:
hello, what variant do you have?
Click to expand...
Click to collapse
I have xt1797, purchased in Taiwan
Hello. How to install it? I have already unlocked Bootloader and what's next?
Danke!
OK done. I used this on my Mac
./fastboot getvar max-sparse-size
./fastboot oem fb_mode_set
./fastboot flash partition gpt.bin
./fastboot flash bootloader bootloader.img
./fastboot flash modem NON-HLOS.bin
./fastboot flash fsg fsg.mbn
./fastboot erase modemst1
./fastboot erase modemst2
./fastboot flash dsp adspso.bin
./fastboot flash logo logo.bin
./fastboot flash boot boot.img
./fastboot flash recovery recovery.img
./fastboot flash system system.img_sparsechunk.0
./fastboot flash system system.img_sparsechunk.1
./fastboot flash system system.img_sparsechunk.2
./fastboot flash system system.img_sparsechunk.3
./fastboot flash system system.img_sparsechunk.4
./fastboot flash system system.img_sparsechunk.5
./fastboot flash oem oem.img
./fastboot erase cache
./fastboot erase userdata
./fastboot erase DDR
./fastboot oem fb_mode_clear
./fastboot reboot
Which retail region is it?
can anyone upload some dump file from H930DS oreo device
modem
modemst1
modemst2
carrier
operatorlogging
xbl
xbl2
Please
I've seen alooot of issues lately of people "bricking" their Nord N200's without a method of unbricking (at the time of writing, only T-Mobile variant has MSMTool)
I've noticed a reoccurring theme. i myself am guilty of doing it and not realizing what went wrong.
It's one of two things:
1. If the device fails to boot "7" times in a row or encounters a hard panic, it will wipe the metadata partition (the decryption key for data/user storage) and may also switch to the alternate slot automatically.
If your device switches slots on it's own, your userdata is gone.. without a decryption key, there is no getting it back (without a very powerful computer and probably years to brute force decrypt)
You will not be able to boot again until you are on the correct slot (dictated by your super partition and other A/B partitions needing to be up to date)
When back on the proper slot, while in fastboot run:
fastboot -w
This will wipe userdata and metadata partitions to allow metadata to be regenerated upon first boot.
Either "fastboot reboot recovery" or use the keys to select reboot recovery. And "wipe everything"
After this you should be bootable. If not...
2. When attempting to prepare the system for flashing GSI, we humans are messing up surprise surpise.
The issue most specifically stems from the dynamic partition located at /dev/block/by-name/super
this partition actually contains 5 resizable partitions : (i've seen up to 7 on this device including -cow (copy-on-write)
system // system_a/system_b //
system_ext // system_ext_a/system_ext_b //
product // product_a/product_b //
vendor // vendor_a/vendor_b //
odm // odm_a/odm_b //
if on you are running stock and your stock is running on slot b for example, your dynamic partition layout is as follows:
system_b
system_ext_b
product_b
vendor_b
odm_b
the issue lies when we go to flash a GSI and start using the commands:
fastboot delete-logical-parition
fastboot create-logical-parition
i myself have done:
fastboot create-logical-partition system 0
this is wrong. it needs a target slot specified, you will have no issues creating the partition or flashing, but it will most likely fail to boot.
correct usage would be:
fastboot create-logical-partition system_b 0 // or use the size values provided by fastboot getvar all as shown in my example of how to switch slots/unbrick below
Prerequisites:
1. stock firmware package or complete dump of all of these FROM THE SAME SOFTWARE VERSION
I have a T-Mobile variant, but for this proof of concept i used the unbranded NA Software provided here https://www.oneplus.com/support/softwareupgrade/details?code=PM1630638351161
Required Partition Images:
system.img
system_ext.img
product.img
vendor.img
odm.img
boot.img
vendor_boot.img
dtbo.img
uefisecapp.img
imagefv.img
abl.img
core_nhlos.img
qupfw.img
keymaster.img
hyp.img
dsp.img
devcfg.img
bluetooth.img
logo.img
tz.img
xbl.img
xbl_config.img
featenabler.img
modem.img
rpm.img
oplusstanvbk.img
vbmeta.img
vbmeta_system.img
If you're on T-Mobile just use the MSMTool unless you prefer the unbranded software.
2. Fastboot Enhanced from this thread https://forum.xda-developers.com/t/...enhance-payload-dumper-image-flasher.4310553/
( Or if on Linux, find yourself some knowledge on how to use a payload dumper to extract these images from the stock firmware package )
ALL of the partitions listed above that are NOT the 5 in the dynamic partition have BOTH slots A and B on your phone, you can flash all of these packages to both slots and pick either slot A or slot B when you repartition your super partition.
IT IS THE SUPER PARTITION THAT DECIDES WHICH SLOT GETS TO BOOT
(it is in bold because this is the cause of most "bricks" and vbmeta but more on that in a minute)
How to recreate a usable/bootable super partition:
1: identify which of your slots is capable of booting into stock recovery/fastbootd
If you can't boot stock recovery or fastbootd
flash these stock partitions:
dtbo
boot
vendor_boot
to both slots (_a and _b) on all 3
and these
fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_b vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system_a vbmeta_system.img
fastboot --disable-verity --disable-verification flash vbmeta_system_b vbmeta_system.img
Then try again to see which slot is bootable, if neither you lost too much in your super partition that is needed to run recovery, grab a backup of a super.img from someone on here and fastboot flash super super.img, depending on which slot that super.img is meant for, that will be the slot you will need to be on to proceed with the rest of the fixing
2. Boot into Fastbootd ( fastboot reboot fastboot )
Delete EVERYTHING from the super parition.
even if you don't remember making it, dont skip any of these lines just ignore the errors it spits out
fastboot delete-logical-partition system_a
fastboot delete-logical-partition system_b
fastboot delete-logical-partition system
fastboot delete-logical-partition system_ext_a
fastboot delete-logical-partition system_ext_b
fastboot delete-logical-partition system_ext
fastboot delete-logical-partition product_a
fastboot delete-logical-partition product_b
fastboot delete-logical-partition product
fastboot delete-logical-partition vendor_a
fastboot delete-logical-partition vendor_b
fastboot delete-logical-partition vendor
fastboot delete-logical-partition odm_a
fastboot delete-logical-partition odm_b
fastboot delete-logical-partition odm
Now let's recreated something useable. For Stock version 11.0.5.0 N/A my super image used these sizes (obtained by fastboot getvar all )
For my slot B to Slot A proof of concept i used this for slot A:
fastboot create-logical-partition system_a 0x5AFDC000
fastboot create-logical-partition system_ext_a 0x4B7B3000
fastboot create-logical-partition product_a 0x7338A000
fastboot create-logical-partition vendor_a 0x3EC8D000
fastboot create-logical-partition odm_a 0x37E9000
And for a "bricked" user wanting to stay with slot B they used:
fastboot create-logical-partition system_b 0x5AFDC000
fastboot create-logical-partition system_ext_b 0x4B7B3000
fastboot create-logical-partition product_b 0x7338A000
fastboot create-logical-partition vendor_b 0x3EC8D000
fastboot create-logical-partition odm_b 0x37E9000
Depending on which you choose to create, you can now set your desired slot with
fastboot set_active a
or
fastboot set_active b
then use Fastboot Enhanced to flash either the entire payload bin, or flash each to each _a or _b partition from the long list above one by one.
DO NOT LEAVE FASTBOOTD UNTIL YOU'VE FLASHED ALL OF THESE PARTITIONS (NOT JUST THE 5!) OR YOU MAY BE UNABLE TO GET BACK TO FASTBOOTD!!!
Flashing a payload.bin (.zip) in fastboot enhanced will flash to whatever slot is currently active and it monitors which slot is active.
Last is for vbmeta
If you flash any sort of modified boot image (magisk rooted), gsi, or any sort of image that is not stock, you need to flash the stock vbmeta and vbmeta_system with --disable-verity and --disable-verification or you won't be able to do much if anything at all.
in either fastboot or fastbootd:
fastboot —disable-verity —disable-verification flash vbmeta_a vbmeta.img
fastboot —disable-verity —disable-verification flash vbmeta_b vbmeta.img
fastboot —disable-verity —disable-verification flash vbmeta_system_a vbmeta_system.img
fastboot —disable-verity —disable-verification flash vbmeta_system_b vbmeta_system.img
these are very important if you flash files that are not originally from that specific build version/variant
Happy flashing to you all Hopefully this helps some people.
It surprises me there are no success stories commented.
There was a user in the telegram chat that was waiting (for a few days) to be able to send their device back to OnePlus. I let others try to come up with solution for a few days before i took the time to dive into the issue myself.
Immediately upon following this tutorial, they had restored functionality of slot B on their device and avoided sending the device to OnePlus to fix.
As a proof of concept I updated slot A and recreated the super.img for slot A and could easily go back to slot B by flashing my backup super.img(which was for slot B) and switching active slot back to slot B. So made this guide for them to restore proper setup of the super partition.
I hope this guide can help others as well.
This got me back up and running on slot A,thanks again for the guide!
transgirlphoebe said:
Says the guy that gave the advice of wiping the super partition which is guaranteed to make sure you cannot get into recovery or fastbootD. Why don't you go ahead and get on somewhere before a moderator comes along and just removes you from the site entirely
Click to expand...
Click to collapse
I'll be back either way
transgirlphoebe said:
Says the guy that gave the advice of wiping the super partition which is guaranteed to make sure you cannot get into recovery or fastbootD. Why don't you go ahead and get on somewhere before a moderator comes along and just removes you from the site entirely
Click to expand...
Click to collapse
Know your facts
n ask the guy I helped....
he is the one who corrupted his super partition with @Travisholt92 BS twrp. (As stated by the guy I help himself)
B4 I even touched his sh*t.
I Spent 8+hrs remote desktoping with him last night. He seemed happy when I left the chat
I need to remove the ability to wipe the super partition. Don't blame my software for a user error just because you can't use it while running Android 12 GSI. It doesn't work on any device. On Android 11, my twrp works as intended.
Moderator Information
Hello,
I have to remove some off topic posts from this thread. Please post your comment following XDA rules. No finger pointing without proofs, neither calling names. Just be civil in the discussion.
Thanks.
Jerry
Travisholt92 said:
I need to remove the ability to wipe the super partition. Don't blame my software for a user error just because you can't use it while running Android 12 GSI. It doesn't work on any device. On Android 11, my twrp works as intended.
Click to expand...
Click to collapse
Honestly I think it would be best to make it to where you can only wipe user data, since apparently we have to baby the end users
┤Thread Cleaned (again)├┤We really need to stop throwing moderators towards this place and we need your help to make that happen. Please be nice to one another. There's plenty of misery going on out there as it is. This forum is about our shared passion for tech dammit, let's show some love. Or at least get us involved so we can spread some love before things get heated. Thank you for listening, keep an open mind and have a great weekend.├┤Timmy├┤Forum Moderator├
Timmmmaaahh! said:
┤Thread Cleaned (again)├┤We really need to stop throwing moderators towards this place and we need your help to make that happen. Please be nice to one another. There's plenty of misery going on out there as it is. This forum is about our shared passion for tech dammit, let's show some love. Or at least get us involved so we can spread some love before things get heated. Thank you for listening, keep an open mind and have a great weekend.├┤Timmy├┤Forum Moderator├
Click to expand...
Click to collapse
We resolved this disagreement outside of XDA to avoid this from happening in the future and to prevent the other party from getting themselves banned as they are a productive member of the community. I personally didn't want to see that happen over me. Issue resolved sorry for wasting your time
So ... I followed the steps in the OP and now the phone won't boot. Here's what I did:
1. Unpacked T-Mobile OTA payload.bin
2. Rebooted into fastbootd
3. Executed the following commands:
fastboot=/usr/local/bin/fastboot
$fastboot -w
$fastboot flash boot_a boot.img
$fastboot flash boot_b boot.img
$fastboot flash dtbo_a dtbo.img
$fastboot flash dtbo_b dtbo.img
$fastboot flash modem_a modem.img
$fastboot flash modem_b modem.img
$fastboot flash oplusstanvbk_a oplusstanvbk.img
$fastboot flash oplusstanvbk_b oplusstanvbk.img
$fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta.img
$fastboot --disable-verity --disable-verification flash vbmeta_b vbmeta.img
$fastboot --disable-verity --disable-verification flash vbmeta_system_a vbmeta_system.img
$fastboot --disable-verity --disable-verification flash vbmeta_system_b vbmeta_system.img
$fastboot flash abl_a abl.img
$fastboot flash abl_b abl.img
$fastboot flash bluetooth_a bluetooth.img
$fastboot flash bluetooth_b bluetooth.img
$fastboot flash devcfg_a devcfg.img
$fastboot flash devcfg_b devcfg.img
$fastboot flash dsp_a dsp.img
$fastboot flash dsp_b dsp.img
$fastboot flash featenabler_a featenabler.img
$fastboot flash featenabler_b featenabler.img
$fastboot flash hyp_a hyp.img
$fastboot flash hyp_b hyp.img
$fastboot flash imagefv_a imagefv.img
$fastboot flash imagefv_b imagefv.img
$fastboot flash keymaster_a keymaster.img
$fastboot flash keymaster_b keymaster.img
$fastboot flash logo_a logo.img
$fastboot flash logo_b logo.img
$fastboot flash odm odm.img
$fastboot flash qupfw_a qupfw.img
$fastboot flash qupfw_b qupfw.img
$fastboot flash tz_a tz.img
$fastboot flash tz_b tz.img
$fastboot flash uefisecapp_a uefisecapp.img
$fastboot flash uefisecapp_b uefisecapp.img
$fastboot flash xbl_a xbl.img
$fastboot flash xbl_b xbl.img
$fastboot flash xbl_config_a xbl_config.img
$fastboot flash xbl_config_b xbl_config.img
$fastboot flash system system.img
$fastboot flash vendor vendor.img
$fastboot flash product product.img
$fastboot flash core_nhlos_a core_nhlos.img
$fastboot flash core_nhlos_b core_nhlos.img
$fastboot flash rpm_a rpm.img
$fastboot flash rpm_b rpm.img
$fastboot flash system_ext system_ext.img
$fastboot flash vendor_boot_a vendor_boot.img
$fastboot flash vendor_boot_b vendor_boot.img
Then rebooted into recovery the phone stayed dead. Any idea what went wrong and what to do next?
88bbraj said:
So ... I followed the steps in the OP and now the phone won't boot. Here's what I did:
1. Unpacked T-Mobile OTA payload.bin
2. Rebooted into fastbootd
3. Executed the following commands:
Then rebooted into recovery the phone stayed dead. Any idea what went wrong and what to do next?
Click to expand...
Click to collapse
Unbricked it using the MSMDownloadTools. The phone rebooted into OxygenOS and installed the newest update automatically. I intend to unlock the bootloader again and root the device, so if you can spot where I made a mistake in that list of commands you'll save me some trouble the next time I need to update.
It's very clear that you skipped the step of identifying current dynamic partitions using fastboot enhanced/payload dumper (which would have told you which slot was bootable, which slot to recreate, and would have helped you in identifying partition layout mistakes). Next time I advise taking a screenshot on a computer of the partition layout. but the MSM tool is the easiest unbrick method for Metro/T-Mobile devices
Also sorry for the delayed response, the server went down for maintenance about 20 minutes after you posted
But I'm glad you got it sorted out
88bbraj said:
Unbricked it using the MSMDownloadTools. The phone rebooted into OxygenOS and installed the newest update automatically. I intend to unlock the bootloader again and root the device, so if you can spot where I made a mistake in that list of commands you'll save me some trouble the next time I need to update.
Click to expand...
Click to collapse
Travisholt92 said:
It's very clear that you skipped the step of identifying current dynamic partitions using fastboot enhanced/payload dumper (which would have told you which slot was bootable, which slot to recreate, and would have helped you in identifying partition layout mistakes).
Click to expand...
Click to collapse
Your OP reads like that's only necessary for people with soft-bricked phones. Mine wasn't. I was trying to flash the newest OTA update onto a working, rooted TMO-branded phone. I checked which slot was active fastboot getvar active-slot and did not flash both _a and _b slots for the dynamic partitions.
I now have a working, TMO-branded phone with the newest OTA update installed, but I've read that rooted and bootloader-unlocked phones do not get OTA updates automatically. Is a subset of your OP's steps not the proper way to flash the new OTA payload in the future?
Thanks for clarifying.
Im honestly not sure. My mind doesn't care about stock on the N200 until Android 12 to be honest lol. Awaiting to build a Ryzen based PC to start compiling custom ROMs again. I know the n200 trees are nearly stable enough for daily driver usage. But I don't have a system worthy of compiling in less than 12 hours at the moment.
Better software will come soon enough, you won't have to deal with stock for much longer.
88bbraj said:
Your OP reads like that's only necessary for people with soft-bricked phones. Mine wasn't. I was trying to flash the newest OTA update onto a working, rooted TMO-branded phone. I checked which slot was active fastboot getvar active-slot and did not flash both _a and _b slots for the dynamic partitions.
I now have a working, TMO-branded phone with the newest OTA update installed, but I've read that rooted and bootloader-unlocked phones do not get OTA updates automatically. Is a subset of your OP's steps not the proper way to flash the new OTA payload in the future?
Thanks for clarifying.
Click to expand...
Click to collapse
Travisholt92 said:
Im honestly not sure. My mind doesn't care about stock on the N200 until Android 12 to be honest lol. Awaiting to build a Ryzen based PC to start compiling custom ROMs again. I know the n200 trees are nearly stable enough for daily driver usage. But I don't have a system worthy of compiling in less than 12 hours at the moment.
Better software will come soon enough, you won't have to deal with stock for much longer.
Click to expand...
Click to collapse
I didn't like the stock global N200. TMO fixes a few niggling issues (global doesn't recognize the CPU version, as an example), but global certainly makes the updating process simpler.
Anyway, I gleaned a lot of information from various posts of yours on this website which were useful, so thanks.
This guide worked for me to get back to stock from a GSI, THANK YOU! Your work is appreciated.
@Travisholt92 I get an error from fastboot when I try to delete/create the partitions.
fastboot create-logical-partition system_a 0
Creating 'system_a' FAILED (remote: 'unknown command')
fastboot: error: Command failed
I'm using fastboot version 28.0.2-debian. Any ideas why I can't recreate some of these partitions?
no_el said:
@Travisholt92 I get an error from fastboot when I try to delete/create the partitions.
fastboot create-logical-partition system_a 0
Creating 'system_a' FAILED (remote: 'unknown command')
fastboot: error: Command failed
I'm using fastboot version 28.0.2-debian. Any ideas why I can't recreate some of these partitions?
Click to expand...
Click to collapse
You're using an outdated version of fastboot that doesn't support the required commands. Update to the latest version of Fastboot from the Google sdk
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
This is when they added the command.
33.0.1 is the latest and the download link is at the top of the page linked in this comment.
Hey guys,
I am trying to update my N200 to the newest OxygenOS, because it keeps nagging me to if I don't.
The first thing I tried was to re-flash the stock boot.img from the extracted OTA (which replaced Magisk with the stock recovery, too) - but still kept getting an installation error.
So I followed the steps above, and flashed *that* payload.bin with the Fastboot Enhanced tool - but it keeps boot-looping me back to fastboot mode. I think the partitions have changed sizes or something, and there's a message saying there were unknown partitions in the payload.bin too.
So for now, I'm flashing back to "OnePlusN200Oxygen_10.O.11_OTA_011_all_2203021426_2dd4f42a2d0545a3" and restoring my TWRP backup (which includes a "super" partition, but of that build), but if anybody can advise how I can update it to the DE2117_11_C.15 build, that would be great.
Hopefully there is a way to do it without erasing data. Usually for other phones I just unroot, install OTA, then re-root. But it seems trickier with the partition size nonsense going on here.
Edit: OnePlus download site hasn't updated the links yet, but there was a full OTA posted on XDA a few days ago, link here.