I am confused a bit about project treble...
I recently installed Resurrection remix Oreo 8.1 ROM from here - https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/rom-resurrection-remix-v6-0-0-t3748465 and got it running in my device.
Q1. Does flashing a treble ROM bring treble support to my device? Does it automatically create the "vendor partition on the device ?
Before this I was running Resurrection remix nougat 7.1.2
ROM from here - https://www.google.co.in/amp/s/forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/rom-resurrection-remix-5-8-5-t3772814/amp/ and I have its backup (made by using Redwolf - 26 - mido (non treble)) on my sdcard.
Now I have redwolf-26-mido(treble) in my device.
Q2. If I flash the non treble recovery and try to restore my Nougat 7.1.2 backup, will it be restored properly? I mean that wouldn't the " vendor " partition cause any problem. Please suggest me the steps to properly restore the backup of non-treble-rom...
Thnx in advance...
You have flashed a treble recovery i guess before flashing the rom,right?
Well i think if you wipe everything from the treble recovery and revert to the non-treble one,the one you had before i think you will be ok.
AviralSri said:
I am confused a bit about project treble...
I recently installed Resurrection remix Oreo 8.1 ROM from here - https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/rom-resurrection-remix-v6-0-0-t3748465 and got it running in my device.
Q1. Does flashing a treble ROM bring treble support to my device? Does it automatically create the "vendor partition on the device ?
Before this I was running Resurrection remix nougat 7.1.2
ROM from here - https://www.google.co.in/amp/s/forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/rom-resurrection-remix-5-8-5-t3772814/amp/ and I have its backup (made by using Redwolf - 26 - mido (non treble)) on my sdcard.
Now I have redwolf-26-mido(treble) in my device.
Q2. If I flash the non treble recovery and try to restore my Nougat 7.1.2 backup, will it be restored properly? I mean that wouldn't the " vendor " partition cause any problem. Please suggest me the steps to properly restore the backup of non-treble-rom...
Thnx in advance...
Click to expand...
Click to collapse
RapGodS said:
You have flashed a treble recovery i guess before flashing the rom,right?
Well i think if you wipe everything from the treble recovery and revert to the non-treble one,the one you had before i think you will be ok.
Click to expand...
Click to collapse
By everything do you mean "internal storage" too?
Not necessary if you want though wipe it.(i always wipe it)
Related
Hi everyone!
I want to know if I can use "encryption" or "device encryption" in Lineage OS (Android 7.1.1) with TWRP 3.0.2 with any problems
Actually, can TWRP 3.0.2 decrypt Lineage OS (Android 7.1.1)?
Device: Redmi Note 3 Pro (Qualcomm)
Thanks for any info and help!
Device Encryption is working fine with TWRP 3.1.0.
NOTE: If you have a KATE (Xiaomi Redmi Note 3 SE) installing TWRP 3.1.0 will make official Lineage OS updates (OTA) fail because Lineage OS only support Kenzo and not Kate. A workaround for this problem is flashing TWRP 3.0.2 when you want to update Lineage OS.
NOTE 2: If you rollback to TWRP 3.0.2 to update Lineage OS (Because you have a Kate device and don't want to change any update file) you will be unable to decrypt your system. So if you have a KATE and you are using KENZO ROMS for your device, do not use encryption if you want to update your system. *If you know how to change update files and trick TWRP 3.1.0 to flash a KENZO ROM on your KATE device, ignore this note.
How can i disable encryption ? I have twrp 3.1.0. And latest lineage os build.
Bimm3r said:
How can i disable encryption ? I have twrp 3.1.0. And latest lineage os build.
Click to expand...
Click to collapse
Factory Reset your devices and Instal Again your Rom
Bimm3r said:
How can i disable encryption ? I have twrp 3.1.0. And latest lineage os build.
Click to expand...
Click to collapse
Unfortunately, you can't revert encryption. But the easiest way is making a backup with TWRP, later "Wipe -> FORMAT DATA" and then restore your backup.
david_pjimenez said:
Unfortunately, you can't revert encryption. But the easiest way is making a backup with TWRP, later "Wipe -> FORMAT DATA" and then restore your backup.
Click to expand...
Click to collapse
I see "phone is encypted" under Settings -> Security&Privacy -> Cryptography and Credentials
Fingerprint stopped working this morning (yesterday I updated to build 20180904 and the sensor was working after the update)
I'm unable to install any custom roms.,my device running RR os with ZCX recovery installed.,usually i was able to install any custom roms before i install cardinal oreo rom and change my recovery to 3.1.x.x,.it is installed succesfully but it had random reboot so i restored my previous roms and recovery but sunce then I'm unable to install any custom roms.,its stuck at first installation..
joeyznoise said:
I'm unable to install any custom roms.,my device running RR os with ZCX recovery installed.,usually i was able to install any custom roms before i install cardinal oreo rom and change my recovery to 3.1.x.x,.it is installed succesfully but it had random reboot so i restored my previous roms and recovery but sunce then I'm unable to install any custom roms.,its stuck at first installation..
Click to expand...
Click to collapse
try Redwolf recovery, select correct variant, for 3GB or 2GB RAM.
copy interal estorage to pc and from RedWolf TWRP select wipe > format data (this delete /data /internal (you luse docs and pics if not backed up to external SD or PC) and remove encryption added by MIUI)
then flash your favourity rom, i recommend Nitrogen OS 8.1 + unifficial gapps 8.1, its stable for daily driver. i dont know if volte works, im not from india.
Hello. I have an unlocked G8342, and I'm trying installing phh's GSI. But after I flashed the system image, I cannot boot my phone. It just shows "SONY" and then rebooted automatically.
I tried flashing the SW_binaries_for_Xperia_Android_9.0_2.3.2_v5_yoshino.img or SW_binaries_for_Xperia_Android_8.1.6.4_r1_v16_yoshino.img.
Before I unlock my phone, I've upgraded to the official Pie release. But what I'm installing is Oreo. Does this matter? Or what should I do in order to make it work?
Balthild said:
Hello. I have an unlocked G8342, and I'm trying installing phh's GSI. But after I flashed the system image, I cannot boot my phone. It just shows "SONY" and then rebooted automatically.
Before I unlock my phone, I've upgraded to the official Pie release. But what I'm installing is Oreo. Does this matter? Or what should I do in order to make it work?
Click to expand...
Click to collapse
if u dont backup ur TA partition before unlocking your bootloader, camera will not work on oreo gsi roms. I recommend u can try pie gsi roms, but it has worse camera quality and stability issues..
arslancn said:
if u dont backup ur TA partition before unlocking your bootloader, camera will not work on oreo gsi roms. I recommend u can try pie gsi roms, but it has worse camera quality and stability issues..
Click to expand...
Click to collapse
I just cannot even boot the GSI ROM. The camera might have issues, but it's not important right now...
Balthild said:
I just cannot even boot the GSI ROM. The camera might have issues, but it's not important right now...
Click to expand...
Click to collapse
I am having the same issue as you, I can't boot every gsi, even the 9.0 ones
yuezhengbaizhi said:
I am having the same issue as you, I can't boot every gsi, even the 9.0 ones
Click to expand...
Click to collapse
what gsi rom are you trying to flash? Do you have TWRP installed? I have a SOV36 (Japan AU version) and it boots with most of all gsi's. Currently using omni rom.
Here is my steps for flashing.
1. boot into twrp
2. goto wipe and factory reset (don't wipe data, system or cache just factory reset)
3. flash img
3a. optional: goto wipe; repair and resize system (if you want gapps)
4. flash gapps
5. flash magisk if you want root
6. reboot
Hope this helps
sinkoo1979 said:
what gsi rom are you trying to flash? Do you have TWRP installed? I have a SOV36 (Japan AU version) and it boots with most of all gsi's. Currently using omni rom.
Here is my steps for flashing.
1. boot into twrp
2. goto wipe and factory reset (don't wipe data, system or cache just factory reset)
3. flash img
3a. optional: goto wipe; repair and resize system (if you want gapps)
4. flash gapps
5. flash magisk if you want root
6. reboot
Hope this helps
Click to expand...
Click to collapse
I have tried the Phh's latest 9.0 GSI and RR's GSI and ERFAN's Q GSI and the official q GSI from Google.
None of them work, all stuck on the Sony boot logo
yuezhengbaizhi said:
I have tried the Phh's latest 9.0 GSI and RR's GSI and ERFAN's Q GSI and the official q GSI from Google.
None of them work, all stuck on the Sony boot logo
Click to expand...
Click to collapse
latest RR gsi did not work for me either but roms like omni, bootleggers, lineage 16 all booted on my SOV 36
Flash the lastest pie ftf, then follow sinkoo1979, instructions, also be sure you only flash ARM64-A versions.. I know Omni, Bliss and bootleggers work with imo bootleggers was the nicest but the unofficial one here has ceased development.. Use open camera for your pics...
The Roms are a hit or miss...make and keep a twrp backup handy...
Hi i have a problem with my poco f1
Status : UBL , NO OS , Orangefox recovery
Tried : flashing many roms and changed from twrp to orangefox but the problem persists. While trying to install the roms i wiped everything before.
Problem : Whenever i try installing a custom rom i get an error 7 message that says : xiaomi.verify_vendor() failed to read current vendor UTC build date: -2
I am not able to flash any custom rom and when i try i get this error.
The problem occurred when i tried to boot on my installed rom from multirom recovery. I had backed up everything but when i restore the backup (except the multiRom recovery) the phone is stuck on the pocophone logo.
If you need any more info i can provide please ask for it.
try clean flashing global stable fastboot rom using mi flash tool then flash twrp and flash any rom you want
https://mirror.akhilnarang.me/MIUI/beryllium/
take the latest vendor image 9.3.28 (dated 29-03-2019 17:11)
flash this via twrp and then flash rom
it should work
YasuHamed said:
https://mirror.akhilnarang.me/MIUI/beryllium/
take the latest vendor image 9.3.28 (dated 29-03-2019 17:11)
flash this via twrp and then flash rom
it should work
Click to expand...
Click to collapse
I will try this method first due to the smaller download size. I hope it works so i do not have to flash the stock rom again and go though the whole process.
It worked. I am now flashing a custom rom. My question is why did this happen ?
jackaros said:
It worked. I am now flashing a custom rom. My question is why did this happen ?
Click to expand...
Click to collapse
BRO WHENEVER you are trying to flash new rom be on latest vendor , firmware and vendor can be found on leanage os xda page 1 , updated rom requires latest vendor
jackaros said:
It worked. I am now flashing a custom rom. My question is why did this happen ?
Click to expand...
Click to collapse
I think you came from MIUI10.2.x
since, miui10 on android9, Xiaomi has started using MODIFIED version of VENDOR image*
so when you flash custom rom which works on standard vendor image, it gives your either error7 or hangs on splash screen
*android has following partitions /boot /recovery /system, /data, /internalstorage /persist /OEM
oem or VENDOR partition translates android
using modified oem (vendor) image in android 9, its xiaomi's attempt for speedy android updates (CGI) (treble)
YasuHamed said:
I think you came from MIUI10.2.x
since, miui10 on android9, Xiaomi has started using MODIFIED version of VENDOR image*
so when you flash custom rom which works on standard vendor image, it gives your either error7 or hangs on splash screen
*android has following partitions /boot /recovery /system, /data, /internalstorage /persist /OEM
oem or VENDOR partition translates android
using modified oem (vendor) image in android 9, its xiaomi's attempt for speedy android updates (CGI) (treble)
Click to expand...
Click to collapse
Just a follow up question..
So what will happen to my phone.. if its on miui 10.2.3.0 then i flashed the latest vendor img?? Will it cause bootloop?? Will it have a better performance?? Will it make games much smoother???
santiagoruel13 said:
Just a follow up question..
So what will happen to my phone.. if its on miui 10.2.3.0 then i flashed the latest vendor img?? Will it cause bootloop?? Will it have a better performance?? Will it make games much smoother???
Click to expand...
Click to collapse
miui10.2.x has its own modified vendor image,
to comeback on standard image, you must flash the image (which you did)
Hello, I'm trying to install a GSI ROM on my Exynos S21 SM-G991N, since there weren't any custom ROMs for it. Is it possible to install a GSI ROM to S21? and how can I install one?
Hi, yes I was able to installs various GSIs successfully by installing TWRP and flashing the GSI with this guide from this thread:
How to make GSI Flasher for Samsung Galaxy A51 Super Partition Image
How to convert a gsi image so that it can be installed on a dynamic partition or super image partition. It may be work for other Android devices. This tool will help you to install gsi image on Dynamic Partition or Super Image Partition...
forum.xda-developers.com
Thanks!
Vailskier said:
Hi, yes I was able to installs various GSIs successfully by installing TWRP and flashing the GSI with this guide from this thread:
How to make GSI Flasher for Samsung Galaxy A51 Super Partition Image
How to convert a gsi image so that it can be installed on a dynamic partition or super image partition. It may be work for other Android devices. This tool will help you to install gsi image on Dynamic Partition or Super Image Partition...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried it and I successfully installed a ROM, but I'm stuck in a bootloop. Can I know which GSI did you use?
hayang1027 said:
I tried it and I successfully installed a ROM, but I'm stuck in a bootloop. Can I know which GSI did you use?
Click to expand...
Click to collapse
I used the official Havoc GSI (the unofficial somehow didn't work), but I was also able to install the Linage GSI and PHH GSI. I think you have to pick the A/B variant and for me only the NON-vndklite version worked. I also usually restore a stock backup first (without recovery to keep TWRP), then I format data and after that install the GSI (without magisk).
I hope this helps
Vailskier said:
I used the official Havoc GSI (the unofficial somehow didn't work), but I was also able to install the Linage GSI and PHH GSI. I think you have to pick the A/B variant and for me only the NON-vndklite version worked. I also usually restore a stock backup first (without recovery to keep TWRP), then I format data and after that install the GSI (without magisk).
I hope this helps
Click to expand...
Click to collapse
I used the Official Havoc-OS 4.1 A/B, but I couldn't boot with it. Maybe it is different depending on the model?
I have experienced this sometimes as well, key for me was to restore the super partition to stock, format data and then flash the gsi with the zip mentioned in the comment above. I have the exynos variant.
Vailskier said:
I have experienced this sometimes as well, key for me was to restore the super partition to stock, format data and then flash the gsi with the zip mentioned in the comment above. I have the exynos variant.
Click to expand...
Click to collapse
I finally installed it! Thanks for helping!
(deleted)
Vailskier said:
I have experienced this sometimes as well, key for me was to restore the super partition to stock, format data and then flash the gsi with the zip mentioned in the comment above. I have the exynos variant.
Click to expand...
Click to collapse
I cannot enroll fingerprint because on-screen fingerprint sensor is not working. Also, I can't use 5G or LTE (only H+)
Is there a way to make any of them work?
Fingerprint sadly does not work for me either. I was able to switch to LTE in the mobile data settings. I hope the GSIs will soon support fingerprint for S21
Vailskier said:
Fingerprint sadly does not work for me either. I was able to switch to LTE in the mobile data settings. I hope the GSIs will soon support fingerprint for S21
Click to expand...
Click to collapse
The LTE unavailable thingie was a problem of all Korean carriers on a VoLTE unsupported ROM. I just ended up customizing One UI