Related
need step by step procedure to install MIUI 6.5.4.2
on lenovo p780_row_8G_s226_140919 rooted.
degaonkarab said:
need step by step procedure to install MIUI 6.5.4.2
on lenovo p780_row_8G_s226_140919 rooted.
Click to expand...
Click to collapse
Here you are:
1. download MIUI for ROW firmware(be careful most are for CN based firmware)
2. copy on SD CARD not Internal Mermory
3. Install custom recovery TWRP if you dont have
4. reboot to TWRP
5. in TWRP go to wipe not advance wipe
6. swipe to wipe
7. go back to install
8. press install
9. find in to your sd card MIUI archive
10. select archive and swipe to install
11. do not wipe after install
12. reboot to system
13. wait for 5 to 10 minute untill MIUI starts. do not wory at the beggining the phone will start more slow.
14. Good Luck
thanks
it worked
Android "P" is the upcoming ninth major version of the Android operating system. It was first announced by Google on March 7, 2018, and the first developer preview was released on the same day. The second developer preview is expected to be released at the next Google I/O developer conference.
Requirements :
Qcom fully treblized device with 8.1 vendor
Global Bugs :
VoLTE
Device specific Bugs :
Mi5 = Reboot Loop into TWRP (Fixed by restore files)
ANDROID P DP3
installation :
- Flash [JDCTeam][TREBLE][v4][Gemini] The Full Treble support project HERE
- Unzip and Flash P-DP3-sGSI.img HERE
- Flash POST-sGSI_1_v0.9.zip HERE
- Flash POST-sGSI_2_v0.12.zip HERE
- Flash POST-sGSI_3.zip HERE
- Flash P-lag-fix.zip file below thread
- Flash incall2.zip HERE
- Reboot
When flashing POST-sGSI untill incall shown error in twrp, Go back to TWRP Home > Mount > check vendor and system
After bootup, you need to install Google Play services 12.8.72 (100400-202717283) HERE
If you are facing with bug Reboot Loop(always reboot into TWRP) you need to restore this backup file from me.
Unzip and put that folder at TWRP/Backups
Goto TWRP > Restore > Check system and vendor only > Reboot.
SECOND METHOD : Restore before 1st boot.
- Flash [JDCTeam][TREBLE][v4][Gemini] The Full Treble support project HERE
- Unzip and Flash P-DP3-sGSI.img HERE
- Flash POST-sGSI_1_v0.9.zip HERE
- Flash POST-sGSI_2_v0.12.zip HERE
- Flash POST-sGSI_3.zip HERE
- Restore this backup file
(Make sure choose System and Vendor only, Dont choose boot, system image, or vendor image and the size is 2101MB).
- Flash P-lag-fix.zip file below thread
- Flash incall2.zip HERE
- Reboot (If stuck at google logo about 3-5mins, try to force shutdown your phone, and turn it on again... it should be work.)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
ANDROID P DP4
CLEAN FLASH IS HIGHLY RECOMMEND
- Flash [JDCTeam][TREBLE][v4][Gemini] The Full Treble support project HERE
- Unzip and Flash P-DP4-sGSI-Aonly.zip HERE
- Flash POST-sGSI_1_v0.11.zip HERE
- Flash POST-sGSI_2_v0.14.zip HERE
- Flash POST-sGSI_3.zip HERE
- Restore this backup file
(Make sure choose System and Vendor only, Dont choose boot, system image, or vendor image and the size is 2180MB).
- Incall.zip already included. Dont need to flash it.
- Flash p-lag-fix DP4.zip file below thread
- Reboot
If your device become reboot loop into TWRP, like in DP3
- Restore this backup file
(Make sure choose System and Vendor only, Dont choose boot, system image, or vendor image and the size is 2180MB).
Click to expand...
Click to collapse
ANDROID P DP5
CLEAN FLASH IS HIGHLY RECOMMEND
- Flash [JDCTeam][TREBLE][v4][Gemini] The Full Treble support project HERE
- Unzip and Flash P-DP5-sGSI-Aonly.zip HERE
- Flash POST-sGSI_1_v0.13.zip HERE
- Flash POST-sGSI_2_v0.16.zip HERE
- Flash POST-sGSI_3 v0.2.zip HERE
- Flash lag-fix-DP5 attached below.
- Mount Vendor on TWRP
- Go to TWRP Advanced->Terminal, type the following and press enter
echo persist.sys.disable_rescue=true >> /vendor/build.prop
- Reboot to System
IF YOU STILL REBOOT INTO RECOVERY AFTER 1ST BOOT.
after flash POST-sGSI_3 v0.2.zip
- Restore this backup file
(Make sure choose System and Vendor only, Dont choose boot, system image, or vendor image and the size is 2180MB).
- Incall.zip already included. Dont need to flash it.
- Flash lag-fix-DP5 attached below.
- Reboot
Click to expand...
Click to collapse
Android P Public Release 1 (PR1)
1. Flash JDCTeam Full Treble Support Project
2. UNZIP and flash Pie A-only as System Image.
3. Mount System and Vendor on TWRP
4. Flash POST-sGSI_1_v0.14.zip
5. Flash POST-sGSI_2_v0.17.zip
6. Flash POST-sGSI_3_v0.2.zip
7. Mount System and Vendor on TWRP
8. Flash p-lag-fix.zip (Attached Below)
9. Mount Vendor on TWRP
10. Go to TWRP Advanced - Terminal, type the following and press enter
echo persist.sys.disable_rescue=true >> /vendor/build.prop
11. Reboot to System
12. Install Google Play Services Apk, reboot and proceed normally.
Click to expand...
Click to collapse
REBOOT LOOP THIRD METHOD by mlira1 and Maixf
1. Flash JDCTeam Full Treble Support Project
2. Flashi DP3/DP4 System Image
3. Mount System and Vendor on TWRP
4. Flash POST-sGSI_1
5. Flash POST-sGSI_2
6. Flash POST-sGSI_3 (skip if going to flash custom kernel)
7. (only if going to flash custom kernel) Flash fix.zip (attached below)
8. (optional) Flash custom kernel
9. (optional) Flash Magisk
10. Mount System and Vendor on TWRP
11. (only if flashed custom kernel) Flash POST-sGSI_3
12. Flash p-lag-fix DP3/4/5.zip
13. Mount Vendor on TWRP
14. Go to TWRP Advanced->Terminal, type the following and press enter
echo persist.sys.disable_rescue=true >> /vendor/build.prop
15. Reboot to System
16. Install Google Play Services Apk, reboot and proceed normally
Click to expand...
Click to collapse
TIPS
Mi5 'Fingerprint Always On' On Android P (Unlock when screen off, and without press any button. Just touch it FP)
- Root your Mi5 with 16.4/16.6 Treble version
- Install Karnel Auditor
- Go to Tab, Select Custom Control
- Press "+", and import this .json file
- Press 3 dots at there, check 'on boot'
- Reboot
Click to expand...
Click to collapse
Mi5 Fingerprint as Home by rmrbpt
- Root your Mi5 with 16.4/16.6 Treble version
- Install Karnel Auditor
- Go to Tab, Select Custom Control
- Press "+", and import this .json file
- Press 3 dots at there, check 'on boot'
- Reboot
Click to expand...
Click to collapse
Mi5 Double Tap to Wakeup Android P
- Root your mi5 with 16.4/16.6 Treble version
- Open Karnel Auditor
- Go to Tab
- Find 'Wake'
- Turn it on, and apply on boot
- Reboot
Click to expand...
Click to collapse
Disable backlight button
Flash Disable Backlight.zip from Magisk !
Attached below.
Click to expand...
Click to collapse
Fix Battery Drain Issue
Still working on it
Alternative for it
- Dissable Dev Mode in Setting
or
- Try custom karnel
Click to expand...
Click to collapse
Get Blue accent / Pixel theme
Add this to your /vendor/build.prop, save and reboot:
Code:
ro.boot.vendor.overlay.theme=com.google.android.theme.pixel
Click to expand...
Click to collapse
MTP Not Detected
- Goto Setting
- System > Advanced > Dev Options > Choose File Transfer at USB Default Configuration
Click to expand...
Click to collapse
How to flash custom kernel on P GSI
FLASHING CUSTOM KARNEL CAUSING YOU CANNOT ENABLE MTP FORVER AND CHARGING FROM PC/LAPTOP
- Follow instruction from flashing JDC untill POST GSI 2, dont flash POST GSI 3.
- Flash Custom Karnel
- Reboot
- Clean Flash is the only way to fix it for now
Click to expand...
Click to collapse
Fix/Solution Arnova/BSG/other dev Gcam lag when changging between front and back camera on P
- Flash Camera Switch Lag Fix.zip, attached below.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Terribly sorry but at what point did you make that "backup file"? I couldn't fix bootloop without your backup. Just wondering, since it's so large and probably mi5-only maybe you could just give us instructions how to make a working system without using someone else's backup?
After restore, have been stuck in G logo for 25 minutes, just followed the instruction
mansonstein said:
After restore, have been stuck in G logo for 25 minutes, just followed the instruction
Click to expand...
Click to collapse
Try select system only. goodluck.
mansonstein said:
After restore, have been stuck in G logo for 25 minutes, just followed the instruction
Click to expand...
Click to collapse
dont choose system image and vendor image.
but system and vendor only
bukandenny said:
dont choose system image and vendor image.
but system and vendor only
Click to expand...
Click to collapse
Yes, exactly, and I tried just system and just vendor, all stucked in G logo. Someway else to try? What causes reboot loop? Thx
If anyone successed, please let me know how you did it.
mansonstein said:
If anyone successed, please let me know how you did it.
Click to expand...
Click to collapse
3 times i used that way, and always work.
asking someone to do that, its work.
mansonstein said:
If anyone successed, please let me know how you did it.
Click to expand...
Click to collapse
try second methode above.
https://drive.google.com/open?id=1VryExVHI-14NfgIcBPp2dFiN-rzhOeNO
I've tried both the methods , but I always end up at this error, please help.
It asks for password and then just reboots into recovery.
There's also a pop up stating "There's internal problem, please contact manufacturer for details"
The above link has the images of the issue.
It would be really helpful if someone can help me boot this rom up. Thank you.
Santosh Kolur said:
https://drive.google.com/open?id=1VryExVHI-14NfgIcBPp2dFiN-rzhOeNO
I've tried both the methods , but I always end up at this error, please help.
It asks for password and then just reboots into recovery.
There's also a pop up stating "There's internal problem, please contact manufacturer for details"
Click to expand...
Click to collapse
Start from beginning.
you need to FORMAT DATA (not wipe data)
then start from beginning dude.
Santosh Kolur said:
https://drive.google.com/open?id=1VryExVHI-14NfgIcBPp2dFiN-rzhOeNO
I've tried both the methods , but I always end up at this error, please help.
It asks for password and then just reboots into recovery.
There's also a pop up stating "There's internal problem, please contact manufacturer for details"
The above link has the images of the issue.
It would be really helpful if someone can help me boot this rom up. Thank you.
Click to expand...
Click to collapse
http://xiaomitips.com/media/2016/07/Format-Data-TWRP.png
bukandenny said:
http://xiaomitips.com/media/2016/07/Format-Data-TWRP.png
Click to expand...
Click to collapse
Thank you. I got it to boot using your solution.
Santosh Kolur said:
Thank you. I got it to boot using your solution.
Click to expand...
Click to collapse
Decrypting internal storage fixes reboots?
Yes it did for me.
First method did it for me, too. I had the bootloop after first reboot and it did the trick, everything is working fine, a bit laggy, but Android P is running smooth on my phone!! I think that's very importat that after first boot you install Play Services as stated in OP and let Google finish its whole Pixel Configuration and updates, then you can try and reboot the phone, if you're hit by the bug, just follow what's in OP.
Few things if you install the GSI and have these issues:
- for Magisk, install version 16.4, just install that after you have set up the phone and stuff, you reboot to twrp and flash it, that's the way it works for me;
- if you have missing network on SIM, just go and configure your apn manually, it'll do the trick;
- for MTP, it's not working for me out of the box, the trick is to enable developers options, go to "Default USB Configuration" or something similar (I have it on italian, so I think that's how it's in English) and select the first one option;
Edit: also there's fingerprint that cannot wake the device, I've read in Telegram groups that some fixes are around for fingerprint, I'll check it out later and report if I find something interesting.
I've suceeded but my FP isn't working, already sent the logcat to the main xda page of GSI
g33k0 b3lk0w said:
I've suceeded but my FP isn't working, already sent the logcat to the main xda page of GSI
Click to expand...
Click to collapse
Cool! So I think there's no solution to this issue at the moment?
aittamattia said:
Cool! So I think there's no solution to this issue at the moment?
Click to expand...
Click to collapse
wait ill upload, u can see my chat on group
Hi, are you new to installing custom ROMs? you don't know where to start? I didn't either
WELCOME TO MY GUIDE TO INSTALL CUSTOM ROMs (NOOB SPECIAL)Things you need to install a custom ROM:
1. A Grand Prime
2. A PC
3. A Data Transfer Wire
4. Some Time and Patience
5. And A working Brain
First things firstUpgrade to Android 5.0.2 stock from samsung
If you are already on 5.0.2 you can skip this step
If you can't update from the device from the phone use this method
1. Download Odin
https://odindownload.com/download/#.W9Bm1GgzbIU
2. Download the stock firmware from this site for your device
https://samsung-firmware.org/ (note search for your baseband version upto SMG53XXXX (Replace XXXX with your baseband version)
3. Shot down your device
4. Press these Keys at once
VOLUME DOWN+HOME+POWER
5. It will show you a warning sign but get past it by pressing VOLUME UP
6. Plug your device into the computer
7. Start Odin
8. Select PDA and select the extracted Firmware file for your device
9. Select start
10. Wait for the device to reboot
Congratulations on completing the first step :good:
Moving on to installing TWRP
1. Find your device code name from this table
SM-G530T/T1/W - gprimelte
SM-G530P - gprimeltespr
SM-S920L - gprimeltetfnvzw
SM-G530MU - gprimeltezt
SM-G530FZ - gprimeltexx
SM-G530M - fortunalteub
SM-G530H (XX) - fortuna3g
SM-G530H (XC) - fortunave3g
2. Head over to this site and download the right .tar file for your device
3. Shut down your device
4. Press VOLUME DOWN+HOME+POWER button
5. Press VOLUME UP
6. Open Odin (Connect your device)
7. Select TWRP .tar file for your device
8. Make sure to uncheck Force Reboot option (to unlock boot loader of your device)
9. Hit Start
10. After completing hit VOLUME UP+HOME+POWER button from the download mode
11. You Have successfully installed TWRP
Next Step
DOWNLOAD A ROM1. Head over to the grand prime development Forum at XDA
2. Select any Thread
3. Download the ROM for your device
4. Download GApps (ARM + ANDROID VERSION OF THE ROM + PICO, MICRO, STOCK)
5. Move them to Internal storage or SD card.
6. Shut down your device.
7. Press VOLUME UP+HOME+POWER
8. In TWRP, select Backup if you want
9. Select Wipe
10. Click on Advanced Wipe
11. Select Delvic/ART Cache , System, Cache, and Data
12. Swipe to wipe
13. Head over to Install
14. Locate the ROM and GApps
15. Select ROM.zip and then click on Add more Zips
16. Select GApps
17. Swipe to install.
18. Wait for it to finish
19. Click reboot device
20. Wait for it to reboot.
21. Setup the ROM.
22. Enjoy
IF YOU BRICKED YOUR DEVICE
Easy fix here
Just flash the Stock ROM via Odin
That's it
HOPE YOU GUYS LIKED IT AND IF I HELPED YOU PRESS THAT :good: THANKS BUTTON
Rom g530mu
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
lahsej said:
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
Click to expand...
Click to collapse
I'm sorry my friend
:crying:
lahsej said:
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
Click to expand...
Click to collapse
try a rom for fortunalteub...if you soft brick your device you can easily go back reflashing a stock rom
THIS THREAD IS DISCONTINUED - AM GETTING TOO OLD TO CONTINUE WETAmod FOR T295
I see people still trying to patch files to get root.
If you flash the TWRP posted by @Talich52, with reboot unchecked you can install Magisk from TWRP.
Tested on T295XXU3BUC3 ROM (Android 10)
PREREQUISITES:
Bootloader unlocked - search forums.xda-developers for instructions how to do this.
OEM unlock on. In Settings/developer options, OEM Unlock slider should be to the right.
INSTRUCTIONS:
1. If prerequisites met: install Android 9 bootloader through ODIN (See attachement: Unzip BL*.zip FIRST)
If on Android 9, go to step 3.
2. Reboot to system
3. Go into download mode.
4. Open ODIN and in the AP slot put TWRP (see attachment below) (Unzip FIRST)
5. Uncheck auto reboot
6. Flash TWRP
7. Press vol dn + pwr keys.
8: When screen goes blank, press vol up + pwr keys.
9. Keep holding down both keys after reboot.
10. Tablet will reboot again.
11. When Samsung logo appears stop pressing pwr key.
12. When bootloader msg appears, release vol up key, quickly press & release pwr key, and quickly press & hold vol up key until in TWRP.
13. Install Fix_vendor_9.0.zip or Fix_vendor_10.0.zip. (Based on installed OS)
See attached files.
14. Clear dalvik/cache if prompted
15. You will then format (NOT WIPE) data. Answer yes to the format prompt
16. Clear dalvik and cache.
17. Reboot back into recovery.
18. Install magisk - see attached
19. Reboot into system. System may reboot again - that's okay
20. Enjoy!!
WETAmod: (For Android 10 ONLY)
I have attached a zip file which will add 3Minit Battery, alternate battery options, 3Minit Clock & Network Meter options to the status bar. There are other options inn the WETAmod package. I have tested all the options and they should all work.. Also includes reboot, download, recovery, shutdown tiles for the taskbar dropdown menu (check buttons). On the audio options page, there are instructions for installing Viper4Android - Please READ CAREFULLY.
The original WETAmod package was developed by @Mentalmuso. He kindly allowed me to post my modified version for the SM-T295 on this forum.
IMPORTANT:
The WETAmod*.zip file HAS TO BE INSTALLED in Magisk Manager.
1. At the bottom of Magisk Manager, you will what looks like a puzzle piece on the right side. Press it. (attachment MM-1.png)
2. At the top of the Modules page, press 'Install from Storage'
3. Find & select the WETAmod_T295_1.zip on your tablet's storage.
4. Installation info will be displayed during install.
5. Reboot
6. In the Apps Drawer, launch the WETAmod app. You can browse the options from the menu
NOTE:
If the 3MinitBatterySettings is not downloading the battery styles, reinstall the 3MinitBatterySettings.apk. You can extract it from the WETAmod zip file.
WETAmod_T295_BUC3.zip
WETAmod_T295_BUC8.zip
WETAmod_T295_BUD3.zip
WETAmod: (For Android 11 ONLY)
I have attached a zip file which will add 3Minit Battery, alternate battery options, 3Minit Clock & Network Meter options to the status bar. There are other options inn the WETAmod package. I have tested all the options and they should all work.. Also includes reboot, download, recovery, shutdown tiles for the taskbar drop down menu (check buttons). On the audio options page, there are instructions for installing Viper4Android - Please READ CAREFULLY.
The original WETAmod package was developed by @mentalmuso. He kindly allowed me to post my modified version for the SM-T295 on this forum.
IMPORTANT:
The WETAmod*.zip file HAS TO BE INSTALLED in Magisk Manager.
1. At the bottom of Magisk Manager, you will what looks like a puzzle piece on the right side. Press it. (attachment MM-1.png)
2. At the top of the Modules page, press 'Install from Storage'
3. Find & select the WETAmod_*.zip on your tablet's storage.
4. Installation info will be displayed during install.
5. Reboot
6. In the Apps Drawer, launch the WETAmod app. You can browse the options from the menu
NOTE:
If the 3MinitBatterySettings is not downloading the battery styles, reinstall the 3MinitBatterySettings.apk. You can extract it from the WETAmod zip file.
WETAmod_CUF7_T295.zip (Chinese ROM)
WETAmod_CUF8_T295.zip (Russian ROM)
WETAmod_CUG2_T295.zip (German ROM)
WETAmod_CUG4_T295.zip (Vietnam ROM)
WETAmod_CUK4_T295.zip (Vietnam ROM)
WETAmod_CUK5_T295.zip (Chinese ROM)
just got a 295, I'm downloading stock T295XXU3BUC3 now. It came with T295XXU3BTI4. I'm not taking any chances, LOL.Thanks for the share gcrutchr.
I got it all working!!! Nice work brother
kb5rir said:
I got it all working!!! Nice work brother
Click to expand...
Click to collapse
Thank you!
Updated the WETAmod zip file to include other battery options, 3Minit Clock, and installing Viper4Android.
Added ***NEW*** WETAmod for BUC8 ROM.
Added ***NEW*** WETAmod for BUD3 ROM.
Hi! Great work! Got root and twrp on buc3.
I'm really interested with custom roms, since I got twrp I tried lineageos 17.1 gsi but it goes into bootloop. I tried following various instructions from everywhere in the internet but to no avail.
Recently, I saw ur conversation with secretwolf and that he claimed he was able to flash gsi roms. Since there is not much difference between 290 and 295, I think it's not too far fetched to have a custom rom flashed on the 295.
Do you have any ideas on how to go about it? Thanks!
lwrncslcd said:
Hi! Great work! Got root and twrp on buc3.
I'm really interested with custom roms, since I got twrp I tried lineageos 17.1 gsi but it goes into bootloop. I tried following various instructions from everywhere in the internet but to no avail.
Recently, I saw ur conversation with secretwolf and that he claimed he was able to flash gsi roms. Since there is not much difference between 290 and 295, I think it's not too far fetched to have a custom rom flashed on the 295.
Do you have any ideas on how to go about it? Thanks!
Click to expand...
Click to collapse
I have been staying with Samsung roms for now. I may try LineageOS in the future. But, to answer your question, maybe try and clear the data partition
This looks amazing I have a tablet on order and wish to do this.
May I please ask, once magisk is installed is that rooted done, or do I need to activate/configure magisk to root or install a module into it please (only used supersu before so unsure of magisk).
Thank you
Alex
Just to make sure - this will ONLY work for SM-T295, correct? SM-T290 is SOL?
detroitredwings said:
Just to make sure - this will ONLY work for SM-T295, correct? SM-T290 is SOL?
Click to expand...
Click to collapse
When you say 'this', what do you mean?
Rooting works for T290. Maybe WETA mod works. WETAmod uses the SystemUI.apk file only.
gcrutchr said:
When you say 'this', what do you mean?
Rooting works for T290. Maybe WETA mod works. WETAmod uses the SystemUI.apk file only.
Click to expand...
Click to collapse
By "this" I mean the thread headline "TWRP - ROOT - WETAmod for SM-T295 (Tab A 8.0 2019)[Updated Apr 20 2021]" and files/instructions. Just wanted to confirm it's not meant for model SM-T290.
detroitredwings said:
By "this" I mean the thread headline "TWRP - ROOT - WETAmod for SM-T295 (Tab A 8.0 2019)[Updated Apr 20 2021]" and files/instructions. Just wanted to confirm it's not meant for model SM-T290.
Click to expand...
Click to collapse
It is meant for what it says: SM-T295
gcrutchr said:
I see people still trying to patch files to get root.
If you flash the TWRP posted by @Talich52, with reboot unchecked you can install Magisk from TWRP.
Tested on T295XXU3BUC3 ROM (Android 10)
PREREQUISITES:
Bootloader unlocked - search forums.xda-developers for instructions how to do this.
OEM unlock on. In Settings/developer options, OEM Unlock slider should be to the right.
INSTRUCTIONS:
1. If prerequisites met: install Android 9 bootloader through ODIN (See attachement: Unzip BL*.zip FIRST)
If on Android 9, go to step 3.
2. Reboot to system
3. Go into download mode.
4. Open ODIN and in the AP slot put TWRP (see attachment below) (Unzip FIRST)
5. Uncheck auto reboot
6. Flash TWRP
7. Press vol dn + pwr keys.
8: When screen goes blank, press vol up + pwr keys.
9. Keep holding down both keys after reboot.
10. Tablet will reboot again.
11. When Samsung logo appears stop pressing pwr key.
12. When bootloader msg appears, release vol up key, quickly press & release pwr key, and quickly press & hold vol up key until in TWRP.
13. Install Fix_vendor_9.0.zip or Fix_vendor_10.0.zip. (Based on installed OS)
See attached files.
14. Clear dalvik/cache if prompted
15. You will then format (NOT WIPE) data. Answer yes to the format prompt
16. Clear dalvik and cache.
17. Reboot back into recovery.
18. Install magisk - see attached
19. Reboot into system. System may reboot again - that's okay
20. Enjoy!!
WETAmod: (For Android 10 ONLY)
I have attached a zip file which will add 3Minit Battery, alternate battery options, 3Minit Clock & Network Meter options to the status bar. There are other options inn the WETAmod package. I have tested all the options and they should all work.. Also includes reboot, download, recovery, shutdown tiles for the taskbar dropdown menu (check buttons). On the audio options page, there are instructions for installing Viper4Android - Please READ CAREFULLY.
The original WETAmod package was developed by @Mentalmuso. He kindly allowed me to post my modified version for the SM-T295 on this forum.
IMPORTANT:
The WETAmod*.zip file HAS TO BE INSTALLED in Magisk Manager.
1. At the bottom of Magisk Manager, you will what looks like a puzzle piece on the right side. Press it. (attachment MM-1.png)
2. At the top of the Modules page, press 'Install from Storage'
3. Find & select the WETAmod_T295_1.zip on your tablet's storage.
4. Installation info will be displayed during install.
5. Reboot
6. In the Apps Drawer, launch the WETAmod app. You can browse the options from the menu
NOTE:
If the 3MinitBatterySettings is not downloading the battery styles, reinstall the 3MinitBatterySettings.apk. You can extract it from the WETAmod zip file.
WETAmod_T295_BUC3.zip
WETAmod_T295_BUC8.zip
WETAmod_T295_BUD3.zip
Click to expand...
Click to collapse
My T295 currently in T295XXU4BUD3 please help me out for root i cant install TWRP
Rafeeknm said:
My T295 currently in T295XXU4BUD3 please help me out for root i cant install TWRP
Click to expand...
Click to collapse
This method not worked for me please update root and custom recovery solution for T295XXU4BUD3
@Talich52 @gcrutchr sir we need root method of U4 bootloader....we just updated out T295....help us plz
@
Plz help us, we updated via OTA,now we cant get root
Plz
@gcrutchr
It surfaced at EFTSU page a file for T295XXU4BUD5, "SM-T295_T295XXU4BUD5_10_567dd.9EFT", but i'm burned off so many reinstalls so I'm just putting this information here.
crudebuster said:
It surfaced at EFTSU page a file for T295XXU4BUD5, "SM-T295_T295XXU4BUD5_10_567dd.9EFT", but i'm burned off so many reinstalls so I'm just putting this information here.
Click to expand...
Click to collapse
what were u doing?
Hi all,
please find attached the Havoc OS 3.8 custom ROM, Olivelite version, and Magisk 20.4 which you will need for installation also.
I am neither the creator of this ROM or anyhow involved with the team, nor do I take any responsibility for everything which might go wrong during installation.
How I got it to work:
1. Unlock your boot loader (you will find appropriate instructions here in the forum and elsewhere on the web, also on YouTube).
2. Ensure that you have the XiaoMi Flash tool and the latest stock rom available, to be able to recover you phone when you encounter issues.
Both can be found on the Xiaomi website.
3. Get the "minimal ADB and Fastboot" tools. You will find in the web.
4. Get TWRP (you will find out what this is and why you need it here in the forum). Take care that it is a version for your phone model, else worst case it will not work.
5. Put the attached files to an external SD card in your phone.
6. install TWRP. Boot into "Fastboot" mode and install TWRP with command "fastboot flash recovery twrp.img".
7. Boot into recovery mode - if yoiu did everything right, should be TWRP now
7a. Wipe - Format data - confirm with "Yes", then go back to main menu
7b. Wipe - advanced wipe - select all except the last 2 (expecially NOT "external SD" if you put your files on there),
go back to main menu
7c. Install - select location where you've put the "havoc 3.8 update.zip" and select the file, afterwards wipe Cache / Dalvik (TWRP will give you this option after install), DO NOT REBOOT
7d. Install - select location where you've put the "magisk v20.4.zip" and select the file, afterwards wipe Cache / Dalvik and then reboot to system.
Now, hopefully, congratulations and enjoy
If something happens and it will not work at all, search the web first for solutions and, if still does not work and you do not get along with it, do not worry. You can always go back to the Xiaomi original ROM with the XiaoMi Flash Tool. Phone must be in "Fastboot" mode for this. In the flash tool, select your ROM location (ideally in the root of your drive as this tool cannot interpret spaces in paths), then confirm and ensure that you have ticked "Clean all" in the bottom, NOT "clean all and lock" - else you will have to do the unlock procedure again.
Sometimes, you need the "permissiver v5.zip" which you will find on the web. In case the above does not work, you can try to install the Permissiver. I never needed it, and I'm using 2 Redmi Olivelite.
I just tried this and had a success message from TWRP about the Havoc 3.8 flash but the Majisk file had an error from within TWRP first time & then it installed after reboot. But I still go straight into TWRP after rebooting.
Right now I have TWRP on the device & a micro SD card to get files onto the device but no OS on it & no backup as one way or another I want a ROOTed OS & it was the Chinese version when I got the phone so useless to me anyway.
What's the best approach from here to get this thing running again?
Thanks!!! Thanks!!! Thanks!!! after trying to get a GSI rom run on my daugthers olivelite i finally got a new rom working. I don't know why last guides didn'twork for me actually a recently requested a boot.img patch but i managed to patch it myself after dealing with python. Now will try to update it to 3.12 i suppouse it iwll have many improvements. But this worked right out of the box for me. Just followed each step and good to go.
For anyone interested. its de 2Gb/32Gb Global Version. with 12.0.3 latest MIUI updated applied trough fastboot. I used OFOX to test it and it worked fine by now.
If you have guide to update HAVOC please point me in the right direction.
Thanks again
I got off .Havoc precisely because it did not have voLTE support & BT HS 's didn't work. Has anyone had any luck on these 2
I absolutely thank you for this rom, I can now miraculously play Asphalt 9 on high settings at 30ish fps while on miui it struggled on lowest settings, the UI is flawless but I only have one problem I can't send nor receive SMS and the phone sometimes reboots randomly but that cannot make me go back to miui since it's too heavy for my phone.
IS THERE any fix for not being able to receive or send SMS
I have a black screen [FIxed by installing OrangeFox recovery]