Does anyone have a same problem with me? I don't know why? I can't hang up or Ignore a phone call, when i pressed both, my phone still rang! I have just reset factory my Bip and re-install Mifit but it still doesn't work! My Bip Firmware version is: V0.1.1.36 and Mifit App version is at 3.4.0! Can anyone tell me what the problem?
What OS on phone? Many people complained about the same issue for other watches on Android 8.0+ (not sure if 8.1 only, or from 8.0 and up). Check other threads. No solution so far unless you want to downgrade phone.
I had the same problem with 7.0 (samsung) I have changed my phone and runs on 8.0 ( huawei) I still have the problem, It worked fine on my samsung 7.0, suddenly it stopped working one day, changed my phone but still the same problem,so I guess its the watch.
take another phone dialer.z.B. google.
same issue for my bip on android 8.1
Amazfit pace.
same issue with Oneplus 3 running android 9 HAVOC OS
Related
I have a G Watch R, Stock MM firmware. No matter what i do i cannot get notifications on the new PE1 update. I've re-installed, re-paired, wiped the watch, uninstalled/re-installed Android Wear. nothing. Everything else works fine on the watch, just no notifications. If i go into the AW settings and test the notifications, i get nothing either. Only thing i haven't tried yet is wiping the watch from recovery. And yes, notification access is allowed and i've tried cycling it. Anyone having similar issues?
This isn't a problem I want to see. I have a Moto 360, still on NK2, but thinking about going to gpe1 with (systemless) root/xposed if possible, but I'm worried about bluetooth connectivity with Android Wear and Garmin devices. Hope you get it figured out.
No problems at all with Android Wear, current version. My phone is on 6.0.1 and my ZenWatch 2 have been compatible with all of the apps that I used to date. No issues with BL or WiFi. Could just be an issue with your watch and not one with Asus.
Moto 360 v1 and S5 on 6.0.1 GPE1
Ok, I finally got around to doing the update and other than having to remove the phone/watch pairing, and wait for it to re-pair and re-load all of the apps, it seems to work as expected.
If only dismissing a text message notification on the watch could mark it as "read" in the Samsung messaging app.
Hello,
Guys i have a problem with the notifications on my Amazfit Pace (international version).
This happens very but very often. Whenever i receive a notification my amazfit app disconnects and reconnects immediately therefore the notification is not pushed to the watch. I tried all of the following:
1. I have tried every single version of Amazfit App and nothing seems to work.
2. I have unlocked the bootloader and installed Pacefied v2.6.4.1 (stable) and the problem still occurs.
3. I have Huawei Mate 10 Lite with EMUI 8.0 . I have tried EVERYTHING (ignore battery optimisation and manual launch of background processes etc..). Nothing seems to work.
This problem doesnt allow Amazmod to work fine on my watch and i am restricted. The problem also occurs with WatchDroid.
HOWEVER, i tried the AMF Notification system for my Pace and works perfectly. I get all notifications on my watch, no disconnections at all, however , i just dont like the interface of it!
Any ideas?
It is an issue with firmware/Amazfit app. You have to wait for new versions, or only use "standard notifications" (either in AmazMod or use Amazfit for notifications).
lfom said:
It is an issue with firmware/Amazfit app. You have to wait for new versions, or only use "standard notifications" (either in AmazMod or use Amazfit for notifications).
Click to expand...
Click to collapse
Thank you so much for your reply! Do you know any other members of experiencing the same problem?
I have tried to use only Amazfit without amazmod or any other service and the problem occurs. I have also tried to use amazmod only with the amazfit application to be off and again I experience the same issue. This happens for over a year now since I bought the watch
Try stock firmware with latest Amazfit from PlayStore, or stock CN firmware with latest Amazfit from Mi.com: I have Pace running AmazeROM (which is basically stock CN) connected to a phone with EMUI 8.0 too, and it much better since a few versions of Amazfit ago...
lfom said:
Try stock firmware with latest Amazfit from PlayStore, or stock CN firmware with latest Amazfit from Mi.com: I have Pace running AmazeROM (which is basically stock CN) connected to a phone with EMUI 8.0 too, and it much better since a few versions of Amazfit ago...
Click to expand...
Click to collapse
Do you have any problems with it? I had pacefied and and now I am using AmazIT which I still have the same problem... Do you have the same problem that I have as well? Disconnecting for no reason?
Guys any news?
No problems here using EMUI 8.0 and latest CN Amazfit and firmware (2.6.5.0). You must use only one kind of notifications: either standard (no replies) or custom (with replies). Do not try to use AmazMod when Amazfit app is syncing with phone or it may make the service freeze.
AmazMod only is supported in stock firmware, if you use a custom ROM then you are on your own trying to fix any problems...
I have this exact issue and it's driving me nuts.
I have a Pace A1602, ROM verison 2.6.5.0v1.1, unlocked, running PACEficator Project | WOS 2.6.5.0 ROM.
I don't use AmazMod or the other mod. I use the standard Amazfit app for sending notifications.
Very often, my watch disconnects, then instantly connects again. When I check my phone, it has a new message that should have been pushed to the phone.
How do I go about fixing this?
chaozz said:
I have this exact issue and it's driving me nuts.
I have a Pace A1602, ROM verison 2.6.5.0v1.1, unlocked, running PACEficator Project | WOS 2.6.5.0 ROM.
I don't use AmazMod or the other mod. I use the standard Amazfit app for sending notifications.
Very often, my watch disconnects, then instantly connects again. When I check my phone, it has a new message that should have been pushed to the phone.
How do I go about fixing this?
Click to expand...
Click to collapse
It's not a problem with the watch, but with the phone: some phones have interferences between WiFi and BT, notably some Huawei and Samsung phones. Or you didn't configure it correctly and Amazfit is being killed while in the background, this usually happens with Android 8.0+, MIUI and EMUI.
It's a Huawei phone. What is the best way to go about this? Disabling WiFi is not really an option, for obvious data cost reasons.
Also, I used this same phone without any issues with a Pebble 2 SE. Never any disconnects.
chaozz said:
It's a Huawei phone. What is the best way to go about this? Disabling WiFi is not really an option, for obvious data cost reasons.
Click to expand...
Click to collapse
First, disable WiFi for a while to test if it's the problem. If you confirm it is, try connecting to a 5GHz WiFi network. If it doesn't happen, your only choice it to write to Huawei and Huami about the issue, Huami is aware of the problem (it is plaguing a lot of Samsung users, it is not their fault but they may be able to add a workaround in Amazfit app).
Guys in my opinion its not a wifi issue since i have an amazfit bip and it works perfectly with the mifit app and Notify. It happens only with amazfit app and pace. I believe (without being a programmer) it has to do with the notification system of the watch. Maybe its because we own mid range phones. If you use AMF notification system on pace it works perfectly. I have tried WatchDroid as well and it has the same problems with the amazfit app as well.
I have a Chinese radio specifically the 7023b model and with android 9 in google pixel 2, everything worked perfect. I connected android car through a usb cable, and enjoyed google maps and spotify. When I have updated to Android 10, everything works until the moment of connecting, it asks me for authorization usd debug, but it remains black screen and although I hear the voice, I can not see the image. It has a solution?
I'm experiencing the exact same problem with a Galaxy S9 and 7023B unit. Worked great with Android 9, no longer with 10. Even received a security update a few days ago, but didn't solve the problem. I contacted the radio vendor and said they are working on a patch for the radio and will send the new firmware when done, but I'm not hopeful. Think it is new security protocols for Android. Hope someone finds a fix!
Im a new user of this forum and have just bought a new
AMAZFIT GTR 2Im using this watch with my android mobile, firmware 5.1.0.4 font 7
i noticed that after my phone has been on flight mode and then removed from flightmode, then my watch keeps ringning about 20 times with the last caller from the day before
i tried to restart my watch + my phone but same problem, does anyone else heard about this, any solution for this ?
I have the exact same issue on my GTS2 Indian variant. Happens everyone I either put my phone on flight mode, switch off bluetooth and turn it back on.
It's either last call notification, or the last message notification. It keeps on ringing and vibrating for 20 minutes. Have not found any solution to this yet.
Nice to know that im not alone with this issue
Lets hope someone else had this problem and found an solution for this !
Hello,
Did you try a version update. I have a GTR 2 version 5.2.11.1 in english.
Not sure if this can solve your problem though, but I don't have this issue.
Check for System Update from Zepp
Thanks for the answer - help - great to see that people are willing to try to help....
I have my English GTR 2 also at version 5.2.11.1 and have updated the Zepp app also but with no luck to my problem....
I had a visit from a friend and he has the same watch, firmware and he also have the same problem....
So i dont know if its a app problem or hardware/smartphone releated or ???
Hi, guys!
I have a Amazfit Stratos A1619, ROM 2.3.13.0 (last ROM). Since the last updade of the firmware, i am facing some problems with the GPS signal. Now the smartwatch can't connect anymore. I tryed to install/uninstall the app, did the factory reset, try on different phone, and nothing helped.
I was wondering if you guys can give a solution for this case.
Thank you in advance!
I had the same problem with my GTS2 , after an update the gps stop working . I've done everything but it won´t work. Since this sh1t has no wired (usb) connection, there is nothing we can do about it.
Same problem with stratos 3 working on ROM 4.2.5. GPS is not available.
It also looks like agps does dot update with Zepp.
I did several factory reset, uninstall/reinstall Zepp.
I'm bored of this Amazfit watch.
Maybe an issue with the Huami server ?
maxime_vdd said:
Same problem with stratos 3 working on ROM 4.2.5. GPS is not available.
It also looks like agps does dot update with Zepp.
I did several factory reset, uninstall/reinstall Zepp.
I'm bored of this Amazfit watch.
Maybe an issue with the Huami server ?
Click to expand...
Click to collapse
I think I found a good solution : I bought a second hand Garmin Fenix 5 !
me too, I have tried many times for Amazfit Stratos A1619, ROM 2.3.13.0 but all failed to catch GPS
Has anyone resolved that issue?
Same problem with my Amazfit Stratos A1619, ROM 2.3.13.0, no solution for the moment.
I have verified with ADB tool that agps files are up to date when swatch is synchronized with ZEPP APP, so this is not the root cause. Some times, GPS is detected very quickly, some times, never, at the same place outside, very stange. Can we downgrade ROM ?
I have same problem here. I used amazfit since 2017, and this happend. So dissapointed. I have try contact amazfit support, they gave me older version of zepp app, but still have agps expired and cannot be updated. Maybe it's time to move on to gamin
anybody solve problem?
gps fix 10 minutes
JoaoBittencourt said:
Hi, guys!
I have a Amazfit Stratos A1619, ROM 2.3.13.0 (last ROM). Since the last updade of the firmware, i am facing some problems with the GPS signal. Now the smartwatch can't connect anymore. I tryed to install/uninstall the app, did the factory reset, try on different phone, and nothing helped.
I was wondering if you guys can give a solution for this case.
Thank you in advance!
Click to expand...
Click to collapse
I also have an Amazfit Stratos A1619, ROM 2.3.13.0 (latest ROM).
I have the same problem.
Has anyone managed to solve this problem with the GPS?