Hi everyone! How Amazfit PACE detect that I'm sleeping?
I have passed 3 nights and the gadget did not tracked my sleep. The message: " No sleep detect".
English firmware v 1.3.3a
Anybody may help me?
Thank you in advance.
Can confirm this. It's not detecting 'afternoon nap', or when I sleep for 6 hours at night, it detects 4 hours or something. Very, very lousy sleep detection.
I've had Alcatel Watch Go before this, it detected sleep to a minute.
Sent from my LG-D858HK using Tapatalk
babaroga73 said:
Can confirm this. It's not detecting 'afternoon nap', or when I sleep for 6 hours at night, it detects 4 hours or something. Very, very lousy sleep detection.
I've had Alcatel Watch Go before this, it detected sleep to a minute.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
it's like mi band , it only "detect" sleep during a period of night
so if you go to sleep at , for example , 6 , probably it will not measure it as sleep , but i had never problem with the second problem (even with mi band / 2)
It's not helping but detects my sleep perfectly.
Sent from my XT1635-02 using Tapatalk
kodorevi8ulis said:
it's like mi band , it only "detect" sleep during a period of night
Click to expand...
Click to collapse
What is this period? So I could adjust myself, if cannot do that to a watch.
Sent from my LG-D858HK using Tapatalk
I detected a big issue in Amazfit PACE (English v 1.3.3a). It can not detect sleeping at all 24 hours off the day.
I explain: I work at night and I go to bed at 07:00AM, sleeping until 03:00PM. I did a test: I changed AM to PM in the connected smartphone and ..."voila".. Amazfit PACE mesured my sleeping.
I concluded that there are a no mesured time window.
Anybody can report this issue to XDA for correct it in the PACEfied ROM?
I consider change the English ROM version (1.3.3a) to PACEfied ROM.
Ronaldo L. Genaro
Agree about night shifts should be supported, but it is known that Huami doesnt support "sleep over a day".
babaroga73 said:
What is this period? So I could adjust myself, if cannot do that to a watch.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
don't know and of course you can't change it i guess if you try to sleep after 6-7am it doesn't measure the sleep
Fibra Man said:
I detected a big issue in Amazfit PACE (English v 1.3.3a). It can not detect sleeping at all 24 hours off the day.
I explain: I work at night and I go to bed at 07:00AM, sleeping until 03:00PM. I did a test: I changed AM to PM in the connected smartphone and ..."voila".. Amazfit PACE mesured my sleeping.
I concluded that there are a no mesured time window.
Anybody can report this issue to XDA for correct it in the PACEfied ROM?
I consider change the English ROM version (1.3.3a) to PACEfied ROM.
Ronaldo L. Genaro
Click to expand...
Click to collapse
1)So you said that the watch actually detect sleep (after the change) so what is the "It can not detect sleeping at all 24 hours off the day."?
2)The problem here is the 7am , it's morning , this is why it didn't measure anything , so how did you actually "concluded that there are a no mesured time window. " ??
Let's hope that the dev of notify &fitness adds support for pace (it has for arc and bip, and he said that he is trying to add pace).
Thanks. Guess I'll have to live healthier[emoji6]
I turned on Heart Rate measurement to always on, I'll see if it has any impact.
But... This is just sad, very sad.
Sent from my LG-D858HK using Tapatalk
babaroga73 said:
Thanks. Guess I'll have to live healthier[emoji6]
I turned on Heart Rate measurement to always on, I'll see if it has any impact.
But... This is just sad, very sad.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
i don't think that it matters
i guess it's just software "error" (not an error actually)
it has the data but the software says "do not translate them as sleep"
with mi fit app you had the option to edit the sleep zone , the problem is that the amazfit app is too "basic"
we must wait at least for an integration (amazfit watch - mi fit)
I've had three functions on my Alcatel Watch Go, that I'm sorely missing now:
1.Vibrating when bluetooth disconects as "Don't forget your phone" (it saved me from loosing phone twice)
2. Ability to remote control media player on phone (since I don't have bt earbuds still)
3.Stonger vibration for alarm and precise sleep measurement.
But the pros outweight the cons on Amazfit, still.
Sent from my LG-G3 using Tapatalk
PLease, focus: "Amazfit PACE - not tracking my sleep ( " No sleep detect")"
Thank you in advance.
kodorevi8ulis said:
don't know and of course you can't change it i guess if you try to sleep after 6-7am it doesn't measure the sleep
1)So you said that the watch actually detect sleep (after the change) so what is the "It can not detect sleeping at all 24 hours off the day."?
2)The problem here is the 7am , it's morning , this is why it didn't measure anything , so how did you actually "concluded that there are a no mesured time window. " ??
Let's hope that the dev of notify &fitness adds support for pace (it has for arc and bip, and he said that he is trying to add pace).
Click to expand...
Click to collapse
1 & 2 ) I think there must exist a time slot of sleep measurement,
What would this interval be? Would it be possible to include a function that allows the user to choose this interval?
Thanks. Regards.
kodorevi8ulis said:
don't know and of course you can't change it i guess if you try to sleep after 6-7am it doesn't measure the sleep
1)So you said that the watch actually detect sleep (after the change) so what is the "It can not detect sleeping at all 24 hours off the day."?
2)The problem here is the 7am , it's morning , this is why it didn't measure anything , so how did you actually "concluded that there are a no mesured time window. " ??
Let's hope that the dev of notify &fitness adds support for pace (it has for arc and bip, and he said that he is trying to add pace).
Click to expand...
Click to collapse
1 & 2 ) I think there must exist a time slot of sleep measurement. What would this interval be?
In PACEfield ROM:
1) Would it be possible to include a function that allows the user to choose the sleep interval that works for him?
2) Or allow the measurement to occur full time?
Thanks. Regards.
Same problem for me. I sleepafter 6am, so no sleepdta. How to report to huami? We buy it by money, not as gift. They must orrect it or should have told before buy
tanna_ccna said:
Same problem for me. I sleepafter 6am, so no sleepdta. How to report to huami? We buy it by money, not as gift. They must orrect it or should have told before buy
Click to expand...
Click to collapse
I will appreciate any help, because nobody could help us. I think it's because most of them sleep during standard hours.
Best regards.
AMAZFIT watch no 24 hours sleep monitoring it only monitor sleep timing from 12-7AM
Hi, is there a solution or patch about this issue? so that sleep mode be monitored 24 hours not just for a specific period of time from 12AM to 7AM.
Same for me .... 1.3.6d not getting when I sleep out of the expected hour .... I hope that it's correcting in the next version ... even if we configure the manual time when we fell to sleep in a different time.
Yes, I hope also, If It´s not possible to detect a nap or the correct sleep time at least make it configurable.
What settings does it require to operate? Does it need the continuous heart rate ?
Using an Amazfit Stratos smartwatch paired with this phone running Amazfit app and Notify & Fitness. I found out that the phone hasn't really be going into deep sleep due to the constant wakelocks and I suspect it may be most definitely due to the smartwatch connection.
In GSam under kernel wakelocks these two would be the highest and their wakelocks times would be similar:
898000.qcom, qup_uart
hal_bluetooth_lock
As there's little information posted about this and I'd ike to find out more before assuming anything more , I'd like to ask is it normal when connected to a smartwatch?
Roneep said:
Using an Amazfit Stratos smartwatch paired with this phone running Amazfit app and Notify & Fitness. I found out that the phone hasn't really be going into deep sleep due to the constant wakelocks and I suspect it may be most definitely due to the smartwatch connection.
In GSam under kernel wakelocks these two would be the highest and their wakelocks times would be similar:
898000.qcom, qup_uart
hal_bluetooth_lock
As there's little information posted about this and I'd ike to find out more before assuming anything more , I'd like to ask is it normal when connected to a smartwatch?
Click to expand...
Click to collapse
It is easy to find out if the culprits are the ones you suspect. Disable the app and check in GSam.
To maintain connectivity with the watch, the app will hold a wakelock for BT. However, the implementation of the app decides how long it is held. In a badly coded app, it can create an issue.
Hey OP, have you found out any resolution for your problem? I just purchased a Bluetooth earphone and have been seeing the same wakelocks ?????
I've been having the same issue with PE Rom. Android 10. 12/12/2019
Hello all,
Until this new fancy app there was a button that allows us to edit sleep.
Few days ago 6.5hours of sleep extra, I woke up at 10:11 and it shows that I've slept until 16:44.
Today, I slept until 10:00 and it shows sleep until 8:30 even if the heart rate shows VERY CLEARLY that i've slept until 10:00.
Is there any way to manually edit these?
Thanks!
Andrei.
you can't edit the sleep data. The watch / app / Amazfit Team think we all sleep in night only. Some people work in night is not possible or unusual.
iyengar said:
you can't edit the sleep data. The watch / app / Amazfit Team think we all sleep in night only. Some people work in night is not possible or unusual.
Click to expand...
Click to collapse
Dont worry, my problem is that it's not working even with night sleep. It registers correctly the time when I fell asleep, but wake up is totally messy.
Someone should bring these thiefs in court because they are mocking users. You cannot make such an update to kill everything and maybe force you to buy newer things.
The Zepp app is very poor at tracking deep sleep. Anyone with the same problem?
Notify & Fitness for GTS is tracking fine.
Two months ago,it tracked sleep normally, but now it doesn't.
Any help? I also reinstalled
See attached images
Yes, I also have the same problem with deep sleep tracking! I made a complete reset of the GTS but it doesn't work. The problem is still the same! I also noticed that since the Zepp update the heart rate is not so accurate as normal and also PAI isn't working. Very disappointing, the GTS was great but now I am thinking to switch to another brand.
Last week I got an amazfit band 5. I already had a stratos 3. Today I ran 20km wearing both the band and the watch, recording the activity only on the stratos. The band 5 was the active device. Then when done I did a manual data sync from the stratos without activating it. I was hoping to get PAI AND all the firstbeat metrics. The data sync worked or it least it said it did but the activity didn't show up in zepp or strava so after maybe 5 minutes I activated the stratos and synced from zepp. Then the activity displayed in zepp. Finally I activated the band 5 again, because it's more comfortable and might be better for sleep etc.. This last step reset my 18k steps in zepp back to zero which was disappointing. I did get 79 pai though.
Should I have waited longer before giving up and activating the stratos or can't this be done?
EDIT* Answering my own question. Yes I should have waited. Today I tried again except this time with an indoor rowing activity on the stratos and a manual data sync from the watch and the activity displayed in zepp and synced to strava without me having to activate the stratos in zepp. I might go back to wearing the bip s.
Sleep detection on the band is pretty strange. Says I was in rem sleep while reading in bed.