Hello guys,
I'm new here.
I rooted the phone a few days ago, it was everything OK. However, when i rebooted the mobile phone, I can't get trough the logo screen. Hard Reset is not working either... eRecovery - wipe data - wipe cache - tried to install the original firmware but i'm not being able to do it.
Any help / sugestions?
Thanks!
miiguelfaria said:
Hello guys,
I'm new here.
I rooted the phone a few days ago, it was everything OK. However, when i rebooted the mobile phone, I can't get trough the logo screen. Hard Reset is not working either... eRecovery - wipe data - wipe cache - tried to install the original firmware but i'm not being able to do it.
Any help / sugestions?
Thanks!
Click to expand...
Click to collapse
Which process did you use to install official firmware?
Related
Hey guys,
Just installed CM 9.1 (stable version) last night and now my phone won't boot up at all.
This is what happened:
- Using omega rom at first, worked fine.
- Did a factory reset, wipe cache, wipe dalvick cache
- Installed CM 9.1
- Had problems with WiFi connection, could find my network and enter network password but it wouldn't connect
- Did a factory reset, etc.
- Re-installed CM 9.1
- Wifi issues still there, decided to fix them in the morning.
- Woke up this morning , phone was running fine for 3-4 hours.
- Went to grab my phone and its off
- Take out battery, try turn it back on. Nothing happens.
- Try charge it when I get home , thinking it might have run out of power. Still not booting up.
- Can't boot into recovery or download
Now I have no idea what to do, is my phone bricked as they say?
Much help would be greatly appreciated.
Regards,
Ben
unclesnoop said:
Hey guys,
Just installed CM 9.1 (stable version) last night and now my phone won't boot up at all.
This is what happened:
- Using omega rom at first, worked fine.
- Did a factory reset, wipe cache, wipe dalvick cache
- Installed CM 9.1
- Had problems with WiFi connection, could find my network and enter network password but it wouldn't connect
- Did a factory reset, etc.
- Re-installed CM 9.1
- Wifi issues still there, decided to fix them in the morning.
- Woke up this morning , phone was running fine for 3-4 hours.
- Went to grab my phone and its off
- Take out battery, try turn it back on. Nothing happens.
- Try charge it when I get home , thinking it might have run out of power. Still not booting up.
- Can't boot into recovery or download
Now I have no idea what to do, is my phone bricked as they say?
Much help would be greatly appreciated.
Regards,
Ben
Click to expand...
Click to collapse
You require a service centre but as you may have to pay for the repair i would buy a USB Recovery Jig first to see if you can boot to download mode .
jje
JJEgan said:
You require a service centre but as you may have to pay for the repair i would buy a USB Recovery Jig first to see if you can boot to download mode .
jje
Click to expand...
Click to collapse
Hey bro,
Thanks for the reply. Alright I will have to look into getting a jig.
How much does the service centre normally charge?
Ben
$350 or around that
Hi,
I noticed a problem with Viber.
A few days ago the phone is rebooted and could not be turned on. I took the battery waited back and turned on the phone.
Today I decide to reinstall Viber.
So i do, but after that appears Logo "Samsung Galaxy SIII and 9300" then goes out and certainly help get this logo and all again.
Remove the battery, turn on the phone remove Viber and everything works.
not Root telephone.
https://www.youtube.com/watch?v=JGVt_7TFJkk
Android version : 4.1.2
Karnel : 3.0.31-1314436 [email protected] #1
minor version: JZ054k.I9300XXEMG4
How to fix it?
What is the problem.
denius011 said:
Hi,
I noticed a problem with Viber.
A few days ago the phone is rebooted and could not be turned on. I took the battery waited back and turned on the phone.
Today I decide to reinstall Viber.
So i do, but after that appears Logo "Samsung Galaxy SIII and 9300" then goes out and certainly help get this logo and all again.
Remove the battery, turn on the phone remove Viber and everything works.
not Root telephone.
https://www.youtube.com/watch?v=JGVt_7TFJkk
Android version : 4.1.2
Karnel : 3.0.31-1314436 [email protected] #1
minor version: JZ054k.I9300XXEMG4
How to fix it?
What is the problem.
Click to expand...
Click to collapse
Try to Enter recovery, wipe data and factory reset
buddybin said:
Try to Enter recovery, wipe data and factory reset
Click to expand...
Click to collapse
Please tell me how to do this ? Where to find tutorial to Enter recovery > wipe and factory reset?
if you can not use Kies?
I find this tutorial
https://www.youtube.com/watch?v=UvD6ZCENlJA
denius011 said:
Please tell me how to do this ? Where to find tutorial to Enter recovery > wipe and factory reset?
if you can not use Kies?
I find this tutorial
https://www.youtube.com/watch?v=UvD6ZCENlJA
Click to expand...
Click to collapse
Like this (Y)
ฺCaution ! Backup Data before factory reset
buddybin said:
Like this (Y)
ฺCaution ! Backup Data before facetory reset
Click to expand...
Click to collapse
TNX a lot ! I fix it install again Viber and works fine
Bay!
fix for me too.
Hi!
I got some major problems with my G3. I was on stock Android 6 (rooted). Worked fine for some months. Then I decided to encrypt the phone and activated this option in the normal android settings. After some time the phone restarted and I got the "Encryption unsucccessful" page and cannot do anything anymore.
After reading through the help forums I tried the following steps to solve it:
- factory reset
- wipe eveything in twrp and flashed system, boot, modem manually to Android 6 again
- repaired all filesystem partitions in twrp
- many many more factory resets
All didn't help. The only thing that changed is that when coming to the "Encryption unsucccessful" page now the phone hangs up after the next option I choose (shut down or restart or factory reset) so I have to take out the battery to restart or shut down.
Any suggestions how to solve it and maybe also any suggestions what might have gone wrong? Don't want to kill the next phone the same way by just enabling encryption!?
hello guys
i hv a weird problem i was using my phone and suddenly the phone crashes and keeps rebooting so i desided to wipe data and after wiping it still boot looping and much worse a reset phone screen pops up after every wipe data and keeps showing me this error
Encryption Unsuccessful Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you need to preform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.
note ( it's non rooted phone ) / hope you guys help me
That's a big problem. Download the MIUI ROM from their website, flash it via Mi Flash Tool. There are many tutorials there that can help you.
I'm having a strange issue after flashing latest firmware on my Tab S7 (SM-T870)...
When I try to flash an update with odin I'm using "HOME_CSC" as I want to keep the data on the device. However it results in a boot loop to recovery where I have 3 options
1. Restart the phone
2. Factory reset
3. Check logs
Restarting the phone just restarts it and boots to the same menu.
I've checked the logs and saw an error saying:
Unable to set property "ro.boottime.init.mount.cache"
I've tried wiping cache in recovery as well, but that didn't help.
Anyone here who can help me out?
Thanks!
Lif3mau5 said:
I'm having a strange issue after flashing latest firmware on my Tab S7 (SM-T870)...
When I try to flash an update with odin I'm using "HOME_CSC" as I want to keep the data on the device. However it results in a boot loop to recovery where I have 3 options
1. Restart the phone
2. Factory reset
3. Check logs
Restarting the phone just restarts it and boots to the same menu.
I've checked the logs and saw an error saying:
Unable to set property "ro.boottime.init.mount.cache"
I've tried wiping cache in recovery as well, but that didn't help.
Anyone here who can help me out?
Thanks!
Click to expand...
Click to collapse
Maybe try to reflash previous firmware version.
There is no need to run after the lastest update.
Vntnox said:
Maybe try to reflash previous firmware version.
There is no need to run after the lastest update.
Click to expand...
Click to collapse
No I tried it but only factory reset does help -.-
This is why I hate Samsung for Security reasons after a f***ing Update ...
I have the same problem, but i didn't update from Odin.
Just OTA september update, and the phone randomly goes in bootloop like once in a week.
Same here. Does anyone have any news?
same here. im in a bootloop and not even factory reset helps. i can access recovery and download mode and have flashed newest firmware three times via Odin with "pass," wiped cache, name it i've done it. I'm despondent. Does
Samsung not have the equivalent of Oneplus's MSM tool? four days have i worked furiously to save my phone.
sorry to revive, but I'm having this issue as well on my z fold 4.
Factory reset helped for about a week, and back to bootloops every 3 min or so.
PASS received in Odin, had to use micro usb cable with C-adapter as c->c did not allow Odin to complete flash (stuck at ~95% on "Super").
Not sure which error in the logs apply, but the "unable to set property "ro.boottime.init.mount.cache" to "0": error code: 0xb, try count 1-3" seem to be cause for alarm.
Has anyone fixed this?