there isn't any guide in the forum for flashing stock rom in mido. what are these factory images and ota-fulls. please someone make a complete guide for flashing the stock rom in redmi note 4 mido
http://en.miui.com/thread-565784-1-1.html
k3lcior said:
http://en.miui.com/thread-565784-1-1.html
Click to expand...
Click to collapse
Do you know how to perform ota updates with magisk installed (this guide: https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203). The complete fault-proof method.
I don't know I dislike MIUI so my knowledge is limited about it.
k3lcior said:
I don't know I dislike MIUI so my knowledge is limited about it.
Click to expand...
Click to collapse
ok fine.
Related
I need modified boot image for rooting miui 8 global beta 6.7.5. I also need twrp..
Just use the cofface twrp to flash a SuperSU zip and you'll be fine
agambhandari said:
Just use the cofface twrp to flash a SuperSU zip and you'll be fine
Click to expand...
Click to collapse
Bro can u provide the link
arunsreekumar said:
Bro can u provide the link
Click to expand...
Click to collapse
A bit of reading of the forum, would help you allot!
For TWRP versions see : -
http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
Also there is a good wiki on the reddit xiaomi
corkiejp said:
A bit of reading of the forum, would help you allot!
For TWRP versions see : -
http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
Also there is a good wiki on the reddit xiaomi
Click to expand...
Click to collapse
Can u prove flashing tutorials. Akso if i bricked what should i do. Just flash fimaware with mi flash only?
arunsreekumar said:
Can u prove flashing tutorials. Akso if i bricked what should i do. Just flash fimaware with mi flash only?
Click to expand...
Click to collapse
Firstly you need to officially unlocked the bootloader then Fellow the instruction to flash twrp: http://en.miui.com/thread-296053-1-1.html, after that changed to alka twrp for flashing official miui rom, root and installed exposed framework by solarwarez.
Sent from my Redmi Note 3 using Tapatalk
timberwolf60 said:
Firstly you need to officially unlocked the bootloader then Fellow the instruction to flash twrp: http://en.miui.com/thread-296053-1-1.html, after that changed to alka twrp for flashing official miui rom, root and installed exposed framework by solarwarez.
Click to expand...
Click to collapse
So we just install this on PC and go ahead with installing twrp from first option ??
tharmor said:
So we just install this on PC and go ahead with installing twrp from first option ??
Click to expand...
Click to collapse
Yes, make sure pc recognize your device.
cam I flash ota using twrp
Just did it....flawless...just ensure u use option 4 of the tool...did it on miui 8 latest update...
Hello guys, soon i will have a new brand Kate redmi note 3.
What are the exact (newbie) steps to flash a KENZO custom rom/kernel(like RR or Nitrogen OS) on it? (like unlocking bootloader, install twrp,flash rom, make the rom compatible with kate etc).
Thank you
Follow the given flash instructions. In terms of firmware look for Kate firmware or flash kenzo modem afterwards. That's all
RootNightmareX said:
Hello guys, soon i will have a new brand Kate redmi note 3.
What are the exact (newbie) steps to flash a KENZO custom rom/kernel(like RR or Nitrogen OS) on it? (like unlocking bootloader, install twrp,flash rom, make the rom compatible with kate etc).
Thank you
Click to expand...
Click to collapse
step by step tutorial: https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154
Hope this helps!
khajiit said:
step by step tutorial: https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154
Hope this helps!
Click to expand...
Click to collapse
And i must flash something else to make kenzo roms compatible with kate ? If i use this procedure all roms from kenzo will be full compatible with kate?
h0LLe said:
Follow the given flash instructions. In terms of firmware look for Kate firmware or flash kenzo modem afterwards. That's all
Click to expand...
Click to collapse
So i just get TWRP on my phone, flash a kenzo rom and then flash kate modem ? That'al ?? 100% safe without bricking risk?
RootNightmareX said:
And i must flash something else to make kenzo roms compatible with kate ? If i use this procedure all roms from kenzo will be full compatible with kate?
Click to expand...
Click to collapse
nope you have to flash nothing else.
Kenzo=Kate they are identical except for firmware (modem)
only flash the right firmware (psy_man's for KATE)
khajiit said:
nope you have to flash nothing else.
Kenzo=Kate they are identical except for firmware (modem)
only flash the right firmware (psy_man's for KATE)
Click to expand...
Click to collapse
1. So everytime i flash a kenzo rom or kernel i must flash AFTER OR BEFORE the psy_man firmware and its done ?
2. Its the procedure 100% safe, no risks for brick?
RootNightmareX said:
1. So everytime i flash a kenzo rom or kernel i must flash AFTER OR BEFORE the psy_man firmware and its done ?
2. Its the procedure 100% safe, no risks for brick?
Click to expand...
Click to collapse
1) Doesn't matter.
2) Yes. If you brick doing this, well done.
The procedure itself is 100% safe but if you do weird stuff like turning off your computer/phablet during flashing process it can brick. Therefore nobody can guarantee you that you won't brick your device.
theoneofgod said:
1) Doesn't matter.
2) Yes. If you brick doing this, well done.
Click to expand...
Click to collapse
khajiit said:
The procedure itself is 100% safe but if you do weird stuff like turning off your computer/phablet during flashing process it can brick. Therefore nobody can guarantee you that you won't brick your device.
Click to expand...
Click to collapse
So after i flash that psy_man firmware, my device will be 100% compatible with all kenzo roms even if i full wipe/reset or change roms?
RootNightmareX said:
So after i flash that psy_man firmware, my device will be 100% compatible with all kenzo roms even if i full wipe/reset or change roms?
Click to expand...
Click to collapse
Just flash the firmware once
Any issues like no signal or no calls, in the future, flash again.
theoneofgod said:
Just flash the firmware once
Any issues like no signal or no calls, in the future, flash again.
Click to expand...
Click to collapse
I am just asking if i do install lineage and after that i wanna change to aosip, i must only clean, flash the custom rom and flash the firmware again?
RootNightmareX said:
I am just asking if i do install lineage and after that i wanna change to aosip, i must only clean, flash the custom rom and flash the firmware again?
Click to expand...
Click to collapse
I answered you already. No.
hi frnds pls tell me the easy method to root redmi note 3
You can flash su addon. Or flash MagiskSU
Root. You can root with this guede (look in experimental section), without unlocking bootloader and never need to unlock it for flashing custom roms
mohanrokz94 said:
hi frnds pls tell me the easy method to root redmi note 3
Click to expand...
Click to collapse
I don't recommend rooting MIUI because it can have many problems, you can try a custom ROM like lineage OS and root it, I feel that's easier.
Adarsh2000 said:
I don't recommend rooting MIUI because it can have many problems, you can try a custom ROM like lineage OS and root it, I feel that's easier.
Click to expand...
Click to collapse
can i flash a rom by using twrp without root..
Adarsh2000 said:
I don't recommend rooting MIUI because it can have many problems, you can try a custom ROM like lineage OS and root it, I feel that's easier.
Click to expand...
Click to collapse
I have rooted my note 3, even flashed xposed framework, no problem whatsoever
asakurato said:
I have rooted my note 3, even flashed xposed framework, no problem whatsoever
Click to expand...
Click to collapse
do you have a guide on how to do it from stock miui 8.1.3.0? a video perhaps?
asakurato said:
I have rooted my note 3, even flashed xposed framework, no problem whatsoever
Click to expand...
Click to collapse
I flashed exposed, but it says Xposed is installed but not active, can you help? When I tried the same thing on RR 5.7 It worked flawlessly.
Adarsh2000 said:
I flashed exposed, but it says Xposed is installed but not active, can you help? When I tried the same thing on RR 5.7 It worked flawlessly.
Click to expand...
Click to collapse
Did you used the modded version for Miui from SolarWarez?
Tuxedo_20 said:
Did you used the modded version for Miui from SolarWarez?
Click to expand...
Click to collapse
Maybe yes, it showed that it is active but every module install resulted in a boot loop.
Can anyone provide me dump of stock recovery for redmi note 4 (mido) from MIUI 9? I'M in desperate need of stock recovery. Please help me.....
Download stock rom from here Click me !
udayxd said:
Can anyone provide me dump of stock recovery for redmi note 4 (mido) from MIUI 9? I'M in desperate need of stock recovery. Please help me.....
Click to expand...
Click to collapse
download the stable build, and flash it. it will install the stock recovery, just make sure not to install magisk or supersu
MyNameIsRage said:
download the stable build, and flash it. it will install the stock recovery, just make sure not to install magisk or supersu
Click to expand...
Click to collapse
Do i need to flash lazy flasher after flashing stock Rom?
Do i need to flash lazy flasher after flashing stock Rom?
udayxd said:
Do i need to flash lazy flasher after flashing stock Rom?
Click to expand...
Click to collapse
Yes!
saransh arya said:
Yes!
Click to expand...
Click to collapse
Thanks mate
I've attempted to flash resurrection remix rom v6.1 and also tried 6.0 on my Xiaomi redmi note 4 (snapdragon) but it gave me the Error:7.
What do I do? I have no backups and the official site for MIUI rom is down for maintenance.
I need help urgently, Thank You.
meeds said:
I've attempted to flash resurrection remix rom v6.1 and also tried 6.0 on my Xiaomi redmi note 4 (snapdragon) but it gave me the Error:7.
What do I do? I have no backups and the official site for MIUI rom is down for maintenance.
I need help urgently, Thank You.
Click to expand...
Click to collapse
You flashed with a non treble recovery. Use this and flash.
https://drive.google.com/a/my.smccd.edu/uc?id=1DXuos3BhwqaReN54AFB6mVWH7G67ip2a&export=download
donkeey_kong said:
You flashed with a non treble recovery. Use this and flash.
https://drive.google.com/a/my.smccd.edu/uc?id=1DXuos3BhwqaReN54AFB6mVWH7G67ip2a&export=download
Click to expand...
Click to collapse
Worked it out by removing the assert column. Thanks anyways.
donkeey_kong said:
You flashed with a non treble recovery. Use this and flash.
https://drive.google.com/a/my.smccd.edu/uc?id=1DXuos3BhwqaReN54AFB6mVWH7G67ip2a&export=download
Click to expand...
Click to collapse
I have the error 7 if I flash this via twrp will that sort it out ?
stevegtrlmk said:
I have the error 7 if I flash this via twrp will that sort it out ?
Click to expand...
Click to collapse
Yes it will.