Hello guys, soon i will have a new brand Kate redmi note 3.
What are the exact (newbie) steps to flash a KENZO custom rom/kernel(like RR or Nitrogen OS) on it? (like unlocking bootloader, install twrp,flash rom, make the rom compatible with kate etc).
Thank you
Follow the given flash instructions. In terms of firmware look for Kate firmware or flash kenzo modem afterwards. That's all
RootNightmareX said:
Hello guys, soon i will have a new brand Kate redmi note 3.
What are the exact (newbie) steps to flash a KENZO custom rom/kernel(like RR or Nitrogen OS) on it? (like unlocking bootloader, install twrp,flash rom, make the rom compatible with kate etc).
Thank you
Click to expand...
Click to collapse
step by step tutorial: https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154
Hope this helps!
khajiit said:
step by step tutorial: https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154
Hope this helps!
Click to expand...
Click to collapse
And i must flash something else to make kenzo roms compatible with kate ? If i use this procedure all roms from kenzo will be full compatible with kate?
h0LLe said:
Follow the given flash instructions. In terms of firmware look for Kate firmware or flash kenzo modem afterwards. That's all
Click to expand...
Click to collapse
So i just get TWRP on my phone, flash a kenzo rom and then flash kate modem ? That'al ?? 100% safe without bricking risk?
RootNightmareX said:
And i must flash something else to make kenzo roms compatible with kate ? If i use this procedure all roms from kenzo will be full compatible with kate?
Click to expand...
Click to collapse
nope you have to flash nothing else.
Kenzo=Kate they are identical except for firmware (modem)
only flash the right firmware (psy_man's for KATE)
khajiit said:
nope you have to flash nothing else.
Kenzo=Kate they are identical except for firmware (modem)
only flash the right firmware (psy_man's for KATE)
Click to expand...
Click to collapse
1. So everytime i flash a kenzo rom or kernel i must flash AFTER OR BEFORE the psy_man firmware and its done ?
2. Its the procedure 100% safe, no risks for brick?
RootNightmareX said:
1. So everytime i flash a kenzo rom or kernel i must flash AFTER OR BEFORE the psy_man firmware and its done ?
2. Its the procedure 100% safe, no risks for brick?
Click to expand...
Click to collapse
1) Doesn't matter.
2) Yes. If you brick doing this, well done.
The procedure itself is 100% safe but if you do weird stuff like turning off your computer/phablet during flashing process it can brick. Therefore nobody can guarantee you that you won't brick your device.
theoneofgod said:
1) Doesn't matter.
2) Yes. If you brick doing this, well done.
Click to expand...
Click to collapse
khajiit said:
The procedure itself is 100% safe but if you do weird stuff like turning off your computer/phablet during flashing process it can brick. Therefore nobody can guarantee you that you won't brick your device.
Click to expand...
Click to collapse
So after i flash that psy_man firmware, my device will be 100% compatible with all kenzo roms even if i full wipe/reset or change roms?
RootNightmareX said:
So after i flash that psy_man firmware, my device will be 100% compatible with all kenzo roms even if i full wipe/reset or change roms?
Click to expand...
Click to collapse
Just flash the firmware once
Any issues like no signal or no calls, in the future, flash again.
theoneofgod said:
Just flash the firmware once
Any issues like no signal or no calls, in the future, flash again.
Click to expand...
Click to collapse
I am just asking if i do install lineage and after that i wanna change to aosip, i must only clean, flash the custom rom and flash the firmware again?
RootNightmareX said:
I am just asking if i do install lineage and after that i wanna change to aosip, i must only clean, flash the custom rom and flash the firmware again?
Click to expand...
Click to collapse
I answered you already. No.
Related
Hi guys, can anyone tell me how to do it? I have a kate device here, and I'm dying to have cyanogenmod installed on it. Wish there's a non-too-complicated way to get it done.
Update:
Official CyanogenMod 13 for Kenzo works well on Kate too! Everything seems good right now.
Hey can you please Dump your device with twrp and share it with us so we can try to unlock Band 20
Edit: i think banmeifyouwant did it the others way around. Guess you have to repartition your internal memory to have the Layout of kenzo. Also someone in miui Forum posted he has flashed kenzo fastboot to his Kate device but Radio is not working anymore.
wtfjajaja said:
Hi guys, can anyone tell me how to do it? I have a kate device here, and I'm dying to have cyanogenmod installed on it. Wish there's a non-too-complicated way to get it done.
Update:
Official CyanogenMod 13 for Kenzo works well on Kate too! Everything seems good right now.
Click to expand...
Click to collapse
Can you please advise where you got TWRP from? Without TWRP, there's no CM or even root for XMIUI and MIUI Tweaks.
Also looking for a compatible TWRP method for the Kate/prime version. Been scouring the net for hours but can't find anything concrete
Hemphiz said:
Also looking for a compatible TWRP method for the Kate/prime version. Been scouring the net for hours but can't find anything concrete
Click to expand...
Click to collapse
Cofface seems to be a reasonable choice. Otherwise, Alka.
Pumpino said:
Cofface seems to be a reasonable choice. Otherwise, Alka.
Click to expand...
Click to collapse
You have working twrp on Redmi Note 3 pro prime?
Hemphiz said:
You have working twrp on Redmi Note 3 pro prime?
Click to expand...
Click to collapse
I'm still waiting for mine to arrive. Others have used Cofface for Kenzo on their Kate.
Pumpino said:
I'm still waiting for mine to arrive. Others have used Cofface for Kenzo on their Kate.
Click to expand...
Click to collapse
Ditto. Mine is due tomorrow. Thought I'd try and do some revision before flashing but the info I'm finding isn't quite enough for me to gain the confidence to try... May I follow you and feed off your knowledge?
Hemphiz said:
May I follow you and feed off your knowledge?
Click to expand...
Click to collapse
I'll be flashing Cofface TWRP and Xposed, but not CM at this stage. If that's helpful to you, I'll post how I go (if I ever get my hands on it).
Hy guys.. My de vice is kate. But running cm13 fine, stable and no bugs! Please check baseband for confirm, this device is Kate.
Pumpino said:
I'll be flashing Cofface TWRP and Xposed, but not CM at this stage. If that's helpful to you, I'll post how I go (if I ever get my hands on it).
Click to expand...
Click to collapse
Any info/guides would be greatly appreciated. If you stumble across anything you think might be of help for me then feel free to pm me links. I don't know much but read plenty prior to the task ahead. And thanks
DOMRuan said:
Hy guys.. My de vice is kate. But running cm13 fine, stable and no bugs! Please check baseband for confirm, this device is Kate.
Click to expand...
Click to collapse
Perhaps you could post more info. Which TWRP did you use and did you have to modify partition sizes, etc? Or was it as simple as flashing the firmware file and then the ROM itself?
Pumpino said:
Perhaps you could post more info. Which TWRP did you use and did you have to modify partition sizes, etc? Or was it as simple as flashing the firmware file and then the ROM itself?
Click to expand...
Click to collapse
Hi guys! I helped him to get this working. All things started with He didn't know that him device is Kate in first time and flashed Kenzo 7.1.8 Lollipop with modified emmc... in MiFlash to get unofficial bootloader unlock with fastboot oem unlock-go command. He got 5.1.1 Kenzo ROM working but without SIM Card detected due to flashed Kenzo modem. After it, he just flashed latest ALKA TWRP with all partitions support in fastboot and flashed latest CM nightly + GAPPS + CM13-Radios zip. It boots fine but with NO SIM Card detected too and unknown Baseband version. Don't worry. To solve it, just boot in fastboot and flash Kate modem from Kate MIUI Fastboot ROM and voila, fully working CM in Kate device! You guys with flashed TWRP can try to flash CM ROM without modify Partition sizes because CM use less space then MIUI and Kate partition sizes are same from Kenzo. Only system is bigger than Kenzo system but it works, prof of it is flashing Kenzo ROM in Kate with MiFlash don't give error like flashing Kate ROM in Kenzo.
andersonaragao said:
After it, he just flashed latest ALKA TWRP with all partitions support in fastboot and flashed latest CM nightly + GAPPS + CM13-Radios zip.
Click to expand...
Click to collapse
Thanks for the info. What does flashing CM13-Radios.zip do? If we don't flash that, would it leave Kate's default modem active? Would we need to flash the Kate modem each time we install a new nightly? Having to connect the phone to the computer every time would be a pain.
Pumpino said:
Thanks for the info. What does flashing CM13-Radios.zip do? If we don't flash that, would it leave Kate's default modem active? Would we need to flash the Kate modem each time we install a new nightly? Having to connect the phone to the computer every time would be a pain.
Click to expand...
Click to collapse
You can try it. Download CM last nightly and copy to internal storage, unlock your bootloader officially, flash ALKA TWRP recovery, go to backup and select ENTIRE PARTITIONS and do a full backup of your phone then wipe SYSTEM + DATA + CACHE + DALVIK CACHE, flash CM13 + GAPPS and reboot. This will keep your modem and all firmware partitions save. If it don't work and you get bootloop, boot in ALKA TWRP again, click in RESTORE, UNCHECK ONLY FIRMWARE PARTITION and start the restore process. This will boot MIUI again. Then start the process again but now this time, flash CM13-Radios.zip after GAPPS flash and try to boot it. When it boot, restart in bootloader and flash Kate modem and you will get fully working ROM. Or you can replace non-hlos.bin with Kate on in CM13-Radios.zip before flash it.
And no, you don't need to flash Kate modem at each new nightly because CM ROM don't comes with Modem files in it. After you get fully working CM nightly, you will get all OTA's without need a PC connect.
DOMRuan said:
Hy guys.. My de vice is kate. But running cm13 fine, stable and no bugs! Please check baseband for confirm, this device is Kate.
Click to expand...
Click to collapse
Hy, please call us...how did you unlock the bootloader from your Kate? Offical or Unofficial?
Which TWRP do you use?
Which CM13 do you flash on your Kate? The official CM13 for Kenzo?
A little instructions would be so good...Thanks!
@andersonaragao would you suggest a forum for unofficial bootloader unlock please? I'm getting network dropouts and need to flash the modems but xiaomi can take up to 7 and a half years to send an unlock code
Hemphiz said:
@andersonaragao would you suggest a forum for unofficial bootloader unlock please? I'm getting network dropouts and need to flash the modems but xiaomi can take up to 7 and a half years to send an unlock code
Click to expand...
Click to collapse
Unfortunately, to unlock bootloader unofficialy in Kate, you need to flash 5.1.1 MIUI ROM for Kenzo with modified bootloader. I think the better is stay with your stock ROM and wait more for unlock code.
andersonaragao said:
Unfortunately, to unlock bootloader unofficialy in Kate, you need to flash 5.1.1 MIUI ROM for Kenzo with modified bootloader. I think the better is stay with your stock ROM and wait more for unlock code.
Click to expand...
Click to collapse
Ok. Will do. A factory reset fixed the network issue so I can't live with that. Cheers
1. All Recoveries built for Kenzo will work without any issue on Kate as well, You can just stay with official TWRP or CM Recovery as you're pleased.
2. You can always flash the official rom back with MiFlash in EDL mode, if you happen to brick your phone.
Official ROM for Kate
Stable: http://bigota.d.miui.com/V7.3.9.0.M...DE_20160523.0000.23_6.0_global_f7170696d8.tgz
Developer: http://bigota.d.miui.com/6.8.25/kate_global_images_6.8.25_20160805.0000.29_6.0_global_195d892285.tgz
3. To install Official Cyanogenmod 13 for Kenzo on Kate (coming from MIUI), you would have to modify the build.prop and then flash the supported firmwares .zip file. One thing worth mentioning here is that, you must remove or replace NON-HLOS.bin found inside the .zip file, otherwise your phone wouldn't be able to detect the sim card. Still, you can flash only NON-HLOS.bin for Kate (from official rom) on fastboot later if you prefer to skip all the trouble modifying the firmwares .zip file. In my case, the only required files from the firmwares .zip for CM13 to run properly are just emmc_appsboot.mbn and file_contexts.
Hi guys,
I wanted to know if there's a way to port the kenzo nougat roms on kate.
Thank you
editLxo said:
Hi guys,
I wanted to know if there's a way to port the kenzo nougat roms on kate.
Thank you
Click to expand...
Click to collapse
You can flash any Kenzo rom. You just have to flash Kate firmware / modem afterwards. See here for instructions: http://forums.whirlpool.net.au/forum-replies.cfm?t=2566258&p=6&#r120
Tantin said:
You can flash any Kenzo rom. You just have to flash Kate firmware / modem afterwards. See here for instructions: http://forums.whirlpool.net.au/forum-replies.cfm?t=2566258&p=6&#r120
Click to expand...
Click to collapse
ok thanks, but It's okay to flash the modem for android 6 or I've to flash another version of the modem?
editLxo said:
ok thanks, but It's okay to flash the modem for android 6 or I've to flash another version of the modem?
Click to expand...
Click to collapse
If you want to flash Nougat, you have to use Android 7 firmware. Just use the one by PsyMan. It works and won't lock your bootloader.
Flash the firmware, flash the ROM you want to use, flash GApps (Arm64, Android 7.1)
Noter2017 said:
If you want to flash Nougat, you have to use Android 7 firmware. Just use the one by PsyMan. It works and won't lock your bootloader.
Flash the firmware, flash the ROM you want to use, flash GApps (Arm64, Android 7.1)
Click to expand...
Click to collapse
Thanks a lot.
This one seems to be getting universal approval and seems fairly foolproof . Its written for LineageOS (Strix)
[GUIDE][KENZO/KATE]Install any custom rom with locked bootloader - noob friendly and safe
https://forum.xda-developers.com/re...-os-locked-t3546154/post70759777#post70759777
editLxo said:
Hi guys,
I wanted to know if there's a way to port the kenzo nougat roms on kate.
Thank you
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...-miui-9-7-11-23-nougat-volte-t3710540/page108
how can i roll back to miui rom from twrp
My phone is unlocked officially and im using twrp zcx
Plz help me
Ram management and gaming performance is suck at latest LOS update
Yoodaddy16 said:
how can i roll back to miui rom from twrp
My phone is unlocked officially and im using twrp zcx
Plz help me
Ram management and gaming performance is suck at latest LOS update
Click to expand...
Click to collapse
Flash the latest MIUI from ZCX recovery. That's it.
naturist said:
Flash the latest MIUI from ZCX recovery. That's it.
Click to expand...
Click to collapse
Really?
Should i install lazy flasher too?
Yoodaddy16 said:
Really?
Should i install lazy flasher too?
Click to expand...
Click to collapse
You're already safe with ZCX recovery as it includes dm-verify to avoid getting bootloader locked. If you flash the lazy flasher after flashing MIUI, that won't change anything and you will still boot to MIUI. You can flash lazy flasher if you want but its not required.
naturist said:
You're already safe with ZCX recovery as it includes dm-verify to avoid getting bootloader locked. If you flash the lazy flasher after flashing MIUI, that won't change anything and you will still boot to MIUI. You can flash lazy flasher if you want but its not required.
Click to expand...
Click to collapse
Ohh ok thank you so much man
I really appreciate it:laugh:
Yoodaddy16 said:
Ohh ok thank you so much man
I really appreciate it:laugh:
Click to expand...
Click to collapse
did it work? please report
Simoom Sadik said:
did it work? please report
Click to expand...
Click to collapse
Well i wanna try the latest line age os update
If it still no good
Ill try to move back to miui using naturist method
And i got 1 more questions
I want to flash Miui china stable Rom 8.2.1.0
Can i install nano Gapps via twrp after i flash the miui rom?
Yoodaddy16 said:
And i got 1 more questions
I want to flash Miui china stable Rom 8.2.1.0
Can i install nano Gapps via twrp after i flash the miui rom?
Click to expand...
Click to collapse
You are a fool, if you are going to flash official miui.
Because you will end up with bloatware and china letters, etc
If you wan to use miui, simply flash xiaomi.eu
It never locks BL, optimised,...removed china crap. Else is the same china dev base.
Also you have gplay preinstalled and services.
Denis:) said:
You are a fool, if you are going to flash official miui.
Because you will end up with bloatware and china letters, etc
If you wan to use miui, simply flash xiaomi.eu
It never locks BL, optimised,...removed china crap. Else is the same china dev base.
Also you have gplay preinstalled and services.
Click to expand...
Click to collapse
Is the performance of xiaomi.eu good for gaming?
Denis:) said:
You are a fool, if you are going to flash official miui.
Because you will end up with bloatware and china letters, etc
If you wan to use miui, simply flash xiaomi.eu
It never locks BL, optimised,...removed china crap. Else is the same china dev base.
Also you have gplay preinstalled and services.
Click to expand...
Click to collapse
Global Stable/Dev won't have that Chinese letters and bloatware though
dokiace said:
Global Stable/Dev won't have that Chinese letters and bloatware though
Click to expand...
Click to collapse
I move to china stable because they dont block 4g network option
It's incredible, nobody has any idea.
1- flash miui rom
2- flash miui firmware
Use always ZXC twrp.
Never use oficial roms, encrypt data partition and can relock bootloader, use xiaomi.eu roms.
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
jujusito said:
It's incredible, nobody has any idea.
1- flash miui rom
2- flash miui firmware
Use always ZXC twrp.
Never use oficial roms, encrypt data partition and can relock bootloader, use xiaomi.eu roms.
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
Click to expand...
Click to collapse
Im using lazy flasher
So the bootloader is not relocked
When I come back to MIUI, back camera didn't working. Can't connect to camera. Anyone have same issue? Any help?
Denis:) said:
You are a fool, if you are going to flash official miui.
Because you will end up with bloatware and china letters, etc
If you wan to use miui, simply flash xiaomi.eu
It never locks BL, optimised,...removed china crap. Else is the same china dev base.
Also you have gplay preinstalled and services.
Click to expand...
Click to collapse
u donot simply call someone a fool in this community.
if u know something better, don't blame someone else for not being aware of.
u owe an apology to the OP
Simoom Sadik said:
u donot simply call someone a fool in this community.
if u know something better, don't blame someone else for not being aware of.
u owe an apology to the OP
Click to expand...
Click to collapse
Maybe I really didnt choose the right words...but I didnt mean he is a fool, and also explained why might be better for him to choose xiaomi.eu
Global rom is fine aswell, but it might lock his BL
I flash miui.EU from latest LOS 14.1. Now I'm facing my setting always force close. Didn't know what to do. Is flashing radio.zip solve this problem? Or just use latest zcx recovery?
adamkrtng said:
I flash miui.EU from latest LOS 14.1. Now I'm facing my setting always force close. Didn't know what to do. Is flashing radio.zip solve this problem? Or just use latest zcx recovery?
Click to expand...
Click to collapse
tHis setting force close is a known problem. The way to avoid it is to flash any fastboot developer rom(old or new... Doesn't matter) and then flash any latest Xiaomi.eu roms. This is the only solution I found and many have also commented same thing in past......Any other solution? Please do comment
Dr. Joy Das said:
tHis setting force close is a known problem. The way to avoid it is to flash any fastboot developer rom(old or new... Doesn't matter) and then flash any latest Xiaomi.eu roms. This is the only solution I found and many have also commented same thing in past......Any other solution? Please do comment
Click to expand...
Click to collapse
Magical i can solve the setting problem by flashing radon karnel. But im losing my lte. Now my sim card only receive hspd+ i dont know what happens. Maybe you know how to solve this.
Edit:
I found how to solve lte problem. Its because my country regulation. (Indonesia) do you know how to root this rom?
hello, i'm new mido user, i'm using ido too. i wanna try flash custom rom on mido, is it necessary to flash firmware before flash custom ROM, and what's the purpose we flash firmware? bcause in ido, we don't need to flash firmware before flash custom ROM. I'm still looking for the answer of my question, i hope someone can help me to explain it, thanks
Hmm, what do you mean by firmware?
The steps are:
1. Unlock boot loader
2. Install custom recovery (TWRP)
3. Install custom ROM
i've read some threads of custom rom like Candy ROM, and they said we should to flash firmware. that firmware is cm14-mido-firmware-20170430.zip i mean
Capt_N3m0 said:
i've read some threads of custom rom like Candy ROM, and they said we should to flash firmware. that firmware is cm14-mido-firmware-20170430.zip i mean
Click to expand...
Click to collapse
Oh that. That's only required to flash firmware when you're coming from marshmallow based MIUI only. Otherwise no need.
The thing is if you flash firmware before installing Rom, it's not an issue. You're good to go. You can find latest firmware zips from this (https://forum.xda-developers.com/re.../firmware-firmware-update-2017-08-04-t3651537) thread, huge thanks to @Zile995 for the updates!
sachin n said:
Oh that. That's only required to flash firmware when you're coming from marshmallow based MIUI only. Otherwise no need.
The thing is if you flash firmware before installing Rom, it's not an issue. You're good to go. You can find latest firmware zips from this (https://forum.xda-developers.com/re.../firmware-firmware-update-2017-08-04-t3651537) thread, huge thanks to @Zile995 for the updates!
Click to expand...
Click to collapse
Ahh, finally i can sleep in peace. Thanks for the information. :good:
there isn't any guide in the forum for flashing stock rom in mido. what are these factory images and ota-fulls. please someone make a complete guide for flashing the stock rom in redmi note 4 mido
http://en.miui.com/thread-565784-1-1.html
k3lcior said:
http://en.miui.com/thread-565784-1-1.html
Click to expand...
Click to collapse
Do you know how to perform ota updates with magisk installed (this guide: https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203). The complete fault-proof method.
I don't know I dislike MIUI so my knowledge is limited about it.
k3lcior said:
I don't know I dislike MIUI so my knowledge is limited about it.
Click to expand...
Click to collapse
ok fine.