Got the Wahoo tickr band with the Stratos and the watch shows 20bpm off with optical sensor.. My question, does the watch automaticly adjust and sense my fitness level? Cant find amy sittings for max heart rate in the amazfit app and how do I know its corect for me?
With Stratos you should be able to edit this in your profile page on Amazfit app.
I could before but now its gone after latest Amazfit app update. It was in chines... but still possible to figure out. Hopefully in comes back with next update or I will buy Garmin instead. Always the same thing with chines stuff, close to be good.
Related
Hi all,
I don't know if this already exist or if it is even possible from the technical perspective. I've tried to find how to do it, mainly trying to install one of the already existings apps for android but only one is compatible with the amazfit pace architecture and the result in the watch screen is to poor.
The point is to have a new activity in the smartwatch that record laps by GPS position (fe some garmin models do this as well). You set at the beginning a start point and every time you cross that point the activity set a new laptime. It will be usefull for different sports as for example circuit cycling or motorsports like go karts/motorbikes.
Does someone know if this is possible or if already exist something similar?
Regards
Which device? Pace and Stratos have a function called Autolapse which I guess is what you are looking.
nhedgehog said:
Which device? Pace and Stratos have a function called Autolapse which I guess is what you are looking.
Click to expand...
Click to collapse
Hi nhedgehog, thanks for your reply.
I have an Amazfit Pace... I can see the autolap by distance or by time but can't find the autolap by gps start position or something called autolapse, where is that? Do you have any custom rom installed?
I don't think you can do it besides auto lap by distance or time, as most watches do. If you need anything else then probably you must export the GPX data on watch, transfer it to computer then use a third party service to edit the data.
I'll answer later, just switched the ROM, don't know if I got confused with all that new settings.
I'm on the Amazfit Pace Chines BETA 2.0.6.12 ROM. Here is a thread which lists the activity settings of some outdoor activities.
You are right I can't define a GPS position as Lap Starting. I have the possibility to define autolap by distance and set this alert on or off but not what you were looking for.
I also would be interested by this GPS lap function
WOS2 on Pace has an "Auto Lap" setting (with option of notification separate from the normal lap notification where you can set the lap length), most probably it exists on Stratos as well... Does it do what you need?
Hey, i just received my Bip and synced correctly with iPhone, but when i workout at gym or somewhere, it doesnt save the HR to calculate the burned calories and other aspects, is there any app or something? Because I think that the Bip only uses GPS to estimate pace, but not the HR monitoring.
Sorry for my English, hope you understand.
As far as I know, all Amazfit watches record HR during activities: BIP, Pace and Stratos. They won't use it for calories burnt for common steps (not in any activity) so far. Are you sure your HRM is working? Can you get an individual measurement with the watch?
lfom said:
As far as I know, all Amazfit watches record HR during activities: BIP, Pace and Stratos. They won't use it for calories burnt for common steps (not in any activity) so far. Are you sure your HRM is working? Can you get an individual measurement with the watch?
Click to expand...
Click to collapse
How can i access to that measurement with ios? Through the health app or with the mi fit app?
asyt3 said:
How can i access to that measurement with ios? Through the health app or with the mi fit app?
Click to expand...
Click to collapse
You don't need the app to check if it's working, simply do a manual measurement using the watch. Can you get a value? Does it look reasonable?
But to answer your question, MiFit should display all HRM data after a sync, at least this is how it works with Pace and Amazfit app.
lfom said:
You don't need the app to check if it's working, simply do a manual measurement using the watch. Can you get a value? Does it look reasonable?
But to answer your question, MiFit should display all HRM data after a sync, at least this is how it works with Pace and Amazfit app.
Click to expand...
Click to collapse
Yes, i did a manual measuremente and got 53, but for example, i workout without running, and with 1 hour of training it says 2-3 calories burned, and that is not logic.
If you get bad HRM then it will result in non logic calories burnt data as well... And if you get bad HRM with other person using the watch then probably it has a bad HR sensor and should be replaced.
No, i think the measurement its correct, i tried with several persons and the HBR is correct, but its not used for burned calories, or i dont know how to apply it.
Amazfit watches use a very basic algorithm to calculate burnt calories due to daily steps, it doesn't use HR, even if continuous HRM is on. HR is only used for recorded activities (and even then it seems to be underestimated).
Hi,
Is there any chance to use Amazfit Bip as a heart rate monitor for Endomondo training? I was looking for any answer and i didnt find it. Mi Band 2 works perfect with Tools & Mi Band app. Now I have Amazfit Bip, I tried Mi Fit, Amazfit Tools and Notify & Fitness for Amazfit apps - Endomondo still doesn't see Bip as heart rate monitor. Bluetooth is set to visible in Mi Fit app. Any idea how can i fix it? Thanks.
PS. Sorry for my english, it's far for good i think
You may want to check this:
https://forum.xda-developers.com/showpost.php?p=76746847&postcount=14
lfom said:
You may want to check this:
https://forum.xda-developers.com/showpost.php?p=76746847&postcount=14
Click to expand...
Click to collapse
- Yeah, I already tried it, but it doesn't work and I have no idea why - at point 4, in Endomondo settings i can't connect amazfit bip with Endomondo.
mefisssto said:
- Yeah, I already tried it, but it doesn't work and I have no idea why - at point 4, in Endomondo settings i can't connect amazfit bip with Endomondo.
Click to expand...
Click to collapse
Hello! I know the last reply was sent some months ago but I thought I would comment anyway...
I have tried the method mentioned in this thread for connecting a Mi Band 1S so I could use the hearth rate sensor in Endomondo but also had no luck. After some try-and-fail, I noticed that this method does work with Endomondo versions up to 18.4. Later versions seemingly don't detect the Xiaomi devices so at least for the time being an slightly old version of Endomondo must be used, which can be downloaded from sites such as APKMirror.
Hi everybody
I bought the amazfit 2 and had a few difficulties with interval workouts.
After i set a training in my phone app and synced it to the watch i went for a run.
In most times the training stop and wont continue to the next lap/interval/repeat/segment and i have to stop the activity and start a new running activity.
Does anyone had this problem and can help me work it out ?
Same problem here
I am having the exact same problem here. Doing interval training, set to trigger on a given distance. After the second or third interval repeat the watch get stuck and the next interval never starts, forcing me to save the activity and start a new one. This is really not ideal. I was using a BT HRM, wondering if that might be contributing to the issue ?
First of all, there is no Stratos 2:
Stratos is Huami Sports Watch 2, or simply Stratos (some call it Pace 2, since it came after Pace, but it's also wrong).
Click to expand...
Click to collapse
That being clarified, there is a know bug about interval repetitions, it hangs after some time. A simple workaround is adding multiple intervals with the same distance (or time), dumb but usually work. If you have an International version of the watch (A1619), you can report it in the link below, maybe they fix it some day:
https://support.amazfit.com/hc/en-us/requests/new
I have that bug when changing screens. If i dont change between screens then no problem at allĂ.
Hello guys, I searched all around but could not find anything useful, is there any way to track and display non gps activities on Amazfit BIP ? I mean like doing weight lifting at the gym or something like that, I have this option on my old MiBand 3, but not on my new Amazfit BIP, only activities that I need to go running or something
nvm.