Hey everyone ,
so i have unlocked my mate 10 lite and this was the beginning of the problems, I had to deal with samsung phones before but the huawei was very sensitive, so i got into a problem and broke the phone system, which had taken the phone to an expert and had restored the stock phone system n it was good to roll back phone to work at least, he tells me that he did relock the bootloader but the message of warning still appears everytime i boot up my phone ,
-i noticed that the adb commands works only when the phone is turning on system ,But when i move on the FASTBOOT MODE ,ADB commands do not work anymore ..
-when i enter to developers mode i get the gray OEM unlocking,,
THE QUESTION: How can i get rid the warning message??
Phone unlocked.
FRP locked.
ِِCan u advise me PLEASE or a solution and thanks !
You use Fastboot commands in fastboot.
Related
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
I'm stuck with this problem too. The exact problem. Have you found a way to fix it?
I have exactly the same problem with my Huawei Tablet.
If I boot with the original ROM and look in the "/log" - directory with adb shell, there is a cust.log. The contents say, that the specific ROM is not original or factory.
I think even the bootloader is unlocked, there is a kind of signature checking.
EDIT: @Asdforcer: Have you tried to boot the original boot.rom with "fastboot boot" - command?
How to remove FRP on Huawei Y6 TIT U02
Hi,
Since I try to update firmware from HUAWEI website, my phone comes non stop booting (bootloop). Any one can help me how to fix my phone?
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Try to unlock your bootloader
hi guys.i have have the customer servise flash tool for m86(pro5).just for m86,not work on any other phones.
and i want to share it yo you.
now just forget the customer servise.
it can falsh roms even if you lost your recovery and fastboot when your bl is locked.just like the Downloading Mode in samsung.
tools download here (Credits go to @Naphtha)
TestPCTool 1.0.0.9.rar
MultiUpgrade 4.8.5.rar
SAMSUNG USB DRIVER
How to Flash the Rom (M86).pdf (if you need some help with this just reply i will answer your question if i have time.) although my english is poor
you may need flyme roms here
[url]http://www.flymeos.com/firmwarelist?modelId=10&type=1[/URL]
enjoy it
nothing has changed
error token signature
i have this programms but they don`t worked... (Token signing fail)
P.S. please help me to flash my phone (i have fastboot mode & root, system running normally)
skype - evgen2910
My PC does not recognize my device when connected via USB , is said to have been a malfunction , I installed the RR rom and can not recognize it.
Please help:crying::crying:
Are there any tools that work for us with locked bootloaders and no recovery?
locked boot and rooted Pro 5
hexxor93 said:
Are there any tools that work for us with locked bootloaders and no recovery?
Click to expand...
Click to collapse
i have same situation
without success always i get error token sign failed WHEN USE MultiUpgrade 4.8.5.
WHO HAVE REAL SOLUTION THIS HAPPEN AFTER UNLOCK PASSWORD WITH MRT Dongle.
The same, i've a Token sign failed.
EDIT : After research, this tool is the bull**** beacause we need to are into Meizu factory. Indeed, to get the right token you need another tool, but only Meizu have it.
Sorry Guys.
EDIT 2 : https://forum.xda-developers.com/meizu-pro-5/how-to/to-unlock-hardbricked-meizu-pro-5-t3566173 Possible Way
Hi Guys, any other solution ? It reports me the same token sigh failed.
- First time when I stucked in Guest Mode (firmware 5.1.6G i thing ) I was able to fix it by this guide from KYOTOX
https://forum.xda-developers.com/meizu-mx/general/guide-meizu-mx5-stuck-guest-mode-fix-t3397191
(after boot to the desktop phone was 5-6 seconds in Admin User than phone switched to the "GUEST MODE", no more recovery mode, locked bootloader, rooted ) it was possible to solve it by that guide
- now I stucked after upgrade to 6.9.7.5 with Android 7 again (propably because I am just beginner without any experiences with flashing etc )
- Problem is before desktop appears, new flyme or Android 7 is showing me stupid commercials on 7 sheets, so during the process of reading sheet , phone switches to the GUEST, so in generally no chance.
Sorry for my english
multimedia box said:
i have same situation
without success always i get error token sign failed WHEN USE MultiUpgrade 4.8.5.
WHO HAVE REAL SOLUTION THIS HAPPEN AFTER UNLOCK PASSWORD WITH MRT Dongle.
Click to expand...
Click to collapse
bl locked rooted and no recovery.i use the flash tool but no luck.tokens failed. i follow this steps.i have the phone in bootloader mode{locked,rooted}
c/adb write
1.fastboot devices
2.fastboot oem unlock
3.close and boot again in bootloader mode.now you have unlocked bootloader
4.download recovery TWRP_3.0_m86 and put it at c/adb and write fastboot flash recovery TWRP_3.0_m86.img
5.close phone and press volume + and close button to reboot recovery.
and thats it. the phone boots twrp recovery!!
mikee72 said:
bl locked rooted and no recovery.i use the flash tool but no luck.tokens failed. i follow this steps.i have the phone in bootloader mode{locked,rooted}
c/adb write
1.fastboot devices
2.fastboot oem unlock
3.close and boot again in bootloader mode.now you have unlocked bootloader
4.download recovery TWRP_3.0_m86 and put it at c/adb and write fastboot flash recovery TWRP_3.0_m86.img
5.close phone and press volume + and close button to reboot recovery.
and thats it. the phone boots twrp recovery!!
Click to expand...
Click to collapse
With what rom previously flashed u've been able to do this ?
HI GUYS IM BLOCKED IN FASTBOOT (I THINK THAT IS A SOFTBRICK), AND I CAN'T UNLOCK BOOTLOADER WHIT NORMAL STEP BUT EVEN IN EDL MODE, CMD GIVE ME THIS ERROR: (failed device) oem edl is not allowed, I THINK I AM ON THE LIMIT, I REALLY NEED HELP, TRYING TO OPEN MY MOBILE PHONE TO TRY AN ACCESS POINT, I BROKEN THE REAR DISPLAY (IF SOMEONE HAS THE LINK OF SOME SHOP I WOULD BE GRATEFUL TO), AS YOU CAN INTUED, TODAY is a NO DAY
Try flash stock rom via mi flash tool
MIA3BROKENASS said:
HI GUYS IM BLOCKED IN FASTBOOT (I THINK THAT IS A SOFTBRICK), AND I CAN'T UNLOCK BOOTLOADER WHIT NORMAL STEP BUT EVEN IN EDL MODE, CMD GIVE ME THIS ERROR: (failed device) oem edl is not allowed, I THINK I AM ON THE LIMIT, I REALLY NEED HELP, TRYING TO OPEN MY MOBILE PHONE TO TRY AN ACCESS POINT, I BROKEN THE REAR DISPLAY (IF SOMEONE HAS THE LINK OF SOME SHOP I WOULD BE GRATEFUL TO), AS YOU CAN INTUED, TODAY is a NO DAY
Click to expand...
Click to collapse
You will need an authorized edl account to update stocks again, I am having the same problem, so if you can find any user I really appreciate contacting me with.
Mi A3 weirdly stuck in fastboot mode, please someone help
I recently opened my mi A3's bootloader and then flashed twrp image as it was error or something, my phones got stuck on fastboot mode and after that I have to flash stock rom v11.0.11.0 through mi flash tool and I successfully worked but then I installed magisk and flashed boot image to obtain boot image and that too successful worked but guess what real problem starts here, after the other day I restarted my device and android one logo showed up and then it got stuck on fastboot mode, then I have to again flash the same rom and again patched boot image file to get my phone back working and it went well for 2-3 days but suddenly, yesterday magisk notified that "DTFO is patched, tap to reboot" and I ignored and after that after few hours my phone automatically got restart and stuck on fastboot again and now when I try to flash the same rom again, it takes more than 3500s in mi flash tool and still not showing success, currently stuck on fastboot, no flash tool is working, can someone help please??
I have been experiencing MIUI on MI A3 for a long time, and I tried to go back to Android One because of drain battery. I attempted to flash in MiFlash. Obviously it succeed, it took about 700 seconds, and I obviously unlocked the device, but unfortunately, F*#k Xiaomi, when it rebooted, it went back to Fastboot logo, and it was even more confused when the device was LOCKED again. The unlock icon disappeared in Android One logo, when I checked on fastboot getvar all command, it said that the device wasnt unlocked. IT COMPLETELY LOST UNLOCK, AND I CANT DO ANYTHING. I CAN NOT BOOT TO THE ROM TO ENABLE OEM UNLOCK CUZ IT IS BRICK. I CAN NOT FLASH NEITHER TWRP NOR MIUI ROM NOR EVERYTHING CUZ BOOTLOADER IS GONE, THE PHONE CAN NOT REACH ANY COMMAND AND I CAN NOT FLASH THROUGH MIFLASH ANYMORE . Is there any solution for it, do I need to sell Mi A3 to exchange to iPhone 6s? SCREW MiFlash, everytime I flashed, it always gives a nightmare, rather than giving a hope. . Now I just need a solution to flash any possible rom without unlock bootloader, ANYTHING. Thank you, I will be appreciated.
PNT5V said:
I have been experiencing MIUI on MI A3 for a long time, and I tried to go back to Android One because of drain battery. I attempted to flash in MiFlash. Obviously it succeed, it took about 700 seconds, and I obviously unlocked the device, but unfortunately, F*#k Xiaomi, when it rebooted, it went back to Fastboot logo, and it was even more confused when the device was LOCKED again. The unlock icon disappeared in Android One logo, when I checked on fastboot getvar all command, it said that the device wasnt unlocked. IT COMPLETELY LOST UNLOCK, AND I CANT DO ANYTHING. I CAN NOT BOOT TO THE ROM TO ENABLE OEM UNLOCK CUZ IT IS BRICK. I CAN NOT FLASH NEITHER TWRP NOR MIUI ROM NOR EVERYTHING CUZ BOOTLOADER IS GONE, THE PHONE CAN NOT REACH ANY COMMAND AND I CAN NOT FLASH THROUGH MIFLASH ANYMORE . Is there any solution for it, do I need to sell Mi A3 to exchange to iPhone 6s? SCREW MiFlash, everytime I flashed, it always gives a nightmare, rather than giving a hope. . Now I just need a solution to flash any possible rom without unlock bootloader, ANYTHING. Thank you, I will be appreciated.
Click to expand...
Click to collapse
I think that your current slot is b
Same situation here.
My fault reflashing stock android and locked in partition B.
Now only have a fastboot mode, but with locked bootloader i´m lost.
EDL mode bloqued by Xiaomi (Only verified account)
Xiaomi Flash tool formats your device & locks the bootloader by default (yeah, Xiaomi is stupid). You have to manually change this before you flash your device (the option is located at bottom-right side of the program). Since your device got locked, I'm afraid you won't be able to flash stock ROM with this tool anymore. And custom ROMs/TWRP won't work with locked bootloader. I think EDL is the only solution now.
Hi everyone into this post thread.
We all know that converting chines ace 2 to oxygen os has some issues. We are trying our best to fix such issues, therefore trying different techniques. I had the same issue too, i read one post that flashing ocdt.img of 11R ll fix the issue, therefore, i took step to do it. After flashing 2487 ocdt.img, i restarted bootloader to normal. Phone booted, but still gets black, flicking and then goes black. I tried to restart it with keys, and phone wont detected by pc, even the bootloader was unlocked and usb debugging was enabled too. I tried enough to start in fastboot mode. But nothing, then i forcely start into EDL mode, and it deteceted. I purchased official authentication key to flash it back to coloros 13. The official tool failed to flash with error that image and product code mismatched and i loss money. Now dont know if i purchase a other authentication or wait for the developers to figure out issue.i have a complete flash tool logs, which is very useful for the developer.
Because in the stock image, they have made tachtis to keep users afftected and pay them to bring the devices back.
Pro opinion and fix is needed for everyone affected by this.
you need to flash china version (Ace2) ocdt.img again in your phone
make sure you have unlocked bootloader ( i know you have black screen). then go to fastboot and flash this file.
download file
power off ...
power on +( vol - )
connect cable
then in cmd write
fastboot flash ocdt ocdt.img
you have not orher way .. only this way can work 100%.
in OFP we have not OCDT image . so do not waste your time and money
I had tried enough to boot into fastboot, but phone dont boot, and dont know even this is booting or not due to black screen, i only know theat attaching cable vibrate the phone but it wont detected. Tried combination keys to boot i to bootloader, but no luck. I keep phone as it is to see if battery get drain and ensure that its power off and will try afternoon.
Thanks forsharing stock ocdt for this model.i would request you to kindly rename the file to this specific model, so people know about it. The flashing way is a same.
you need to keep all 3keys togather...
after 15sec it will go to EDL mode.. connect cable
after that ..
keep power + (vol- ).. after 15 sec it will go to fastboot
I face the same issue, I did wrong that FLASHING 11 (not 11 R) OCDT.IMG, The after-sales staff were unable to restore my phone, so they directly gave me a new one.