I was attempting to root my phone last night and it failed miserably AFTER it deleted everything. In typical amateur fashion I did not properly back up my phone and have been trying to just get it back to stock firmware and leave it at that. It is an SM-N950U. I keep getting this error and am at a loss at what to do. I'm running Odin as administrator, I've swapped cords, swapped USB ports, tried different downloads of the firmware and Odin3, nothing seems to work. Does anyone have any idea what I may be doing wrong or what I can do to fix it? The phone displays in red text SW REV CHECK FAIL: (abl)Fused 4 > Binary 3 and Odin displays the following:
ID:0/005 Added!!
ID:0/005 Odin engine v(ID:3.1301)..
ID:0/005 File analysis..
ID:0/005 Total Binary size: 6955 M
ID:0/005 SetupConnection..
ID:0/005 Initialzation..
ID:0/005 Set PIT file..
ID:0/005 DO NOT TURN OFF TARGET!!
ID:0/005 Erase...
ID:0/005 ERASE_SECTOR: 1597195
ID:0/005 Get PIT for mapping..
ID:0/005 ERASE_OK
ID:0/005 Firmware update start..
ID:0/005 NAND Write Start!!
ID:0/005 SingleDownload.
ID:0/005 abl.elf
ID:0/005 FAIL! (Auth)
ID:0/005
ID:0/005 Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ID:0/005 Removed!!
It looks like you are trying to flash a bootloader number 3 version firmware over bootloader number 4 which you cannot do. If you were on oreo then you have to flash the oreo firmware you cant downgrade.
Related
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
mdahlke said:
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
While flashing with odin make sure ur kies is completly closed or from kies tools, preferences, uncheck option open kies while phone connects restart and try should work
Sent from my GT-I9500 using xda premium
I have the SCH-530 from US Cellular and am unsure on what to try next. Wrong forum its not I9300 . Firmware / mods from here will brick your phone . jje
i tried to update my i9300 but everytimes odin gives error
<ID:0/169> Added!!
<ID:0/169> Odin v.3 engine (ID:169)..
<ID:0/169> File analysis..
<ID:0/169> SetupConnection..
<ID:0/169> Initialzation..
<ID:0/169> Get PIT for mapping..
<ID:0/169> Firmware update start..
<ID:0/169> boot.img
<ID:0/169> NAND Write Start!!
<ID:0/169>
<ID:0/169> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
no matter what usb port i use....i also try odin 3.0.4 and 1.8.5 but same error...phone cannot boot or go into recovery ..just in download mode..plz help
BaCkkk said:
i tried to update my i9300 but everytimes odin gives error
<ID:0/169> Added!!
<ID:0/169> Odin v.3 engine (ID:169)..
<ID:0/169> File analysis..
<ID:0/169> SetupConnection..
<ID:0/169> Initialzation..
<ID:0/169> Get PIT for mapping..
<ID:0/169> Firmware update start..
<ID:0/169> boot.img
<ID:0/169> NAND Write Start!!
<ID:0/169>
<ID:0/169> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
no matter what usb port i use....i also try odin 3.0.4 and 1.8.5 but same error...phone cannot boot or go into recovery ..just in download mode..plz help
Click to expand...
Click to collapse
what was the rom before flashing? and what is the f/w that you are flashing now?
i got this phone from my friend and he is noob ..he tried to flash a rom but dont know which on..right now im flashing KIES_HOME_I9300XXEMB5_I
NAND might be damaged or partition struture damaged/corrupt.
Try this rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
If that doesn't work you'll probably need a service centre.
Hello everyone,
I have a problem with my galaxy s3!
It crashes on startup screen "Samsung Galaxy s3, i9300" and it does not go into recovery or in download mode.
I tried it with jig and I was able to go into download mode but when I try to flash the firmware, Odin gives me error.
if I try to flash the full firmware this:
Code:
<ID:0/021> Added!!
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Initialzation..
<ID:0/021> Get PIT for mapping..
<ID:0/021>
<ID:0/021> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
advise anyone know how I can solve my problem?
So I tried to flash TWRP costum recovery ;but got this problem :
Code:
<ID:0/046> Added!!
<ID:0/046> Odin v.3 engine (ID:46)..
<ID:0/046> File analysis..
<ID:0/046> SetupConnection..
<ID:0/046> Initialzation..
<ID:0/046> Get PIT for mapping..
<ID:0/046> Firmware update start..
<ID:0/046> recovery.img
<ID:0/046> NAND Write Start!!
<ID:0/046>
<ID:0/046> Complete(Write) operation failed.
<ID:0/046> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)[CODE]
[/CODE]
And IN the phone I get this error
Code:
]ODINE MODE
PRODUCT NAME:SCH-I535
CURRENT BINARY :Samsung Official
SYSTEM STATUS:Custom
QALCOMM SCEUREBOOT:ENABLE
BOOTLOADER AP SWREV:2
SECURE CHECK FAIL:recovery
now even the stock recovery is gone
I also tried CWM and got the same problem
PS ;I used odine 3.04
My phone crashed and didn't come back, so I didn't lose the information, I downloaded the updated firmware and installed it, everything worked perfect... 5 minutes later the phone turned off, and it was on a screen written " POWER RESET OR UNKNOWN UPLOAD MODE "
And my "ODIN" is giving Re-Partition error, I researched about it and got the "PIT FILE" inside the CSC file, and it doesn't come out of it ->
SM-A115M
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 0 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)