Hi folks, I'm hoping someone can help me unbrick my MXQ Pro 4k. I've searched high and low for the stock firmware but it is nowhere to be found. My box seems to be a peculiar variant and the specs are as follow:
S905x 1GB/8GB S905XQ_V2.0 2017.05.16
SV6051P Wifi
SK Hynix H27UCG812ETR DDR3
It became bricked when I tried to flash different atvXperience firmware img files with the Amlogic USB burn tool. I had successfully flashed it with a version posted by minixfreak on the freaktab forums.
Although not with exactly the same specs, it worked pretty well except for the remote control wouldn't function. So I tried to flash again with what I thought was the stock firmware but unfortunately, that bricked the box pretty good. I tried to revert to the atvXperience firmware that worked from the post, but it now always fails at 7% when trying to format with USB tool. In all cases, I've tried every possible combination of pushing in the reset button in the AV port, shorting the NAND pins, switching the order of USB ports... The box always has a red light when powered and is always recognized by the USB Burn Tool driver when connected to the OTG port on the box but always stops at 7% when it attempts to format.
I hooked up a serial usb/ttl cable to capture boot output, turned on the box and it seems the box is in an infinite loop with the following output:
LOOP:8F;EMMC:800;NAND:85;SD:800;USB:8;LOOP:90;EMMC :800;NAND:85;SD:800;USB:8. It appears the bootloader is corrupt or maybe has been erased.
I tried making a bootable sd card using both burncard maker and bootcard maker but that didn't work either as it can't get past intial boot attempt, even pressing reset or shorting nand pins. I'm not sure if it's because of the boot loop or perhaps incorrect firmware. I haven't been able to find the definitive stock firmware anywhere. I would appreciate help in finding this elusive firmware.
I've scoured the internet for a solution and tried many different things but nothing can get me out of this loop. I'm now at a dead end.
I once had a bricked router that I was able to fix by connecting usb/ttl and putty and repeatedly hitting Ctrl-C after rebooting to get a CFE prompt. At that point I was able to manually flash the router with firmware and revive it. Maybe there's a tool available that would possibly do something like that with the android box?
Also possible I guess that something in the hardware is toast and it's just a paper weight now. Anyway, any help and suggestions would be appreciated.
Hi there, if you don't mind please read carefully what I write below.
I really need help on flashing Vsmart Joy 1 Plus (PQ4002) stock Vsmart OS 2.0 (VOS) - android 8 firmware.
This is device info: https://www.devicespecifications.com/en/model/92b24f11
Story begin when I was on VOS 2.5 - android 9. After running these stock firmwares of it through Miracle Box + QFIL, the phone NEVER turn on at all, remain as HARDBRICK no matter I trying to flash it. QFIL still report as "Succeed" result, no error, but still brick. So far I have tried these sources:
1. https://www.fshare.vn/file/6E9QOWBIF8N9
2. http://www.mediafire.com/file/lgh7g..._1_Plus_PQ4002_8.1.0OPM1.171019_QPST.zip/file
3. https://www.fshare.vn/file/QJ6Y244X29T2
None of them worked. I even took this phone to warranty center but they claimed broken emmc somehow. Furthermore, I format all partition table in QFIL, still no help.
But when I flash this Infinix HOT S3X X622 firmware, it worked https://firmwarefile.com/infinix-hot-s3x-x622; because PQ4002 and X622 identical hardware specification.
So my question is what I have to do to flash the original firmware? Something wrong with it?
Update: i solved myself after found the correct QFIL firmware and android 8 fastboot firmware for it.
Hello there! Ive got problem with boot of my device or/and problem with USB Burning Tool.
First of all ive tried few hours to put right image to my device. When i tried with S905W but got problems with Uboot in USB Burning Tool ("0x32030201]Uboot/Get result/DiskInitial error". But i tried S905X and it went well but only when i uncheck erase flash and boot sections. That was the only way to finish burning correctly. And of course its not working and hanging on Aidens Rom Logo (i was w8ing more than 5 mins).
When i check "erase flash and boot" sections ive got those mostly
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[0x00101004]Erase bootloader/Lowper/Identify/Error result
And yes ive done the Mask Rom thing :/
Pls help
Anyone?
only thing ican suggest is keep trying roms, maybe s905x will stick, it has for a couple of people before
Hi all,
Model : Wechip V8
Cpu : Amlogic S905W
Ram : 2GB Rom : 16GB
They have installed a different version on this device. The remote does not control, does not find wifi, does not connect to ethernet. I couldn't find original software. I found some stuff but I couldn't install it.
can you help me?
Thanks
I have been using W95 S905W android box since early 2018. Over that time, I have tested multiple firmware on it and all the compatible ones have worked without issues. Eventually, I reverted to the stock and used it for about 2 years. One day, I noticed lagging on the device and decided to reboot it but it didn't power on. Since September last year, I've been trying to flash the stock rom and the rest that had worked before but I have not succeeded. I'm getting the error uboot/get result/diskinitial always at 7%. The box is successfully connecting to my computer even without pressing the reset button. Does anyone have a solution to this problem? Thanks.
Hi everyone,
Updates:
2021-08-17 - Added patched Magisk boot for this device. (Conceptum Stock ROM)
I'm starting this thread to collect information and files regarding this particular version of X96 box and to explain to anyone interested what I have discovered so far..
The company who has repackaged the firmware for this box for the Greek market, CONCEPTUM, refuses to release the original firmware for this device.
So currently, I have dumped two types of firmware from a stock box in case it is needed. A standard TWRP backup, and a dd image.
At the moment, I actually am NOT having any luck restoring the firmware using the TWRP restore. Not sure why.
I was able to restore the original firmware using the dd image. So for anyone who screws up their stock firmware, you can use the dd image from the mega drive. Punchline: The stock image has terrible wifi speed as well. I have yet to try restoring the firmware via dd yet but when I do I will write if it works or not.
Here is a link to the folder where I will be updating what compatible files I can find.
4.38 GB folder on MEGA
13 files and 6 subfolders
mega.nz
This post is very incomplete and I will be adding to it shortly.
--------------------------------------
SPECIFICATIONS
4GB RAM/32GB Storage
Ethernet Speed: 1000mbps / 1gbs
Ethernet Chipset: Realtek RTL8211F
Wifi : 5ghz & 2.4 ghz support
Wifi / Bluetooth Chipset: Cdtech 4761743 (which is a Qualcomm QCA6174A design? See links below.)
https://discourse.coreelec.org/t/looking-for-users-with-no-working-wifi-or-bt/9649/248
https://discourse.coreelec.org/t/looking-for-users-with-no-working-wifi-or-bt/9649/249
https://blog.csdn.net/u012851408/article/details/86605778
Motherboard Markings: BM805H_141 V3.2 20352 4020
Motherboard Sticker: 4+32+CDW ZF210129
---------------------------
How to get into recovery
The button needed to access recovery is hidden. It is deep inside the stereo jack. (You can see it if you shine a flashlight into there.
My suggested tool to press this button easily is a qtip with the cotton from one end removed.
Insert the tool, and press it in until you feel the click.
Apply power to the device and as soon as you can see the logo come on, release the tool pressure.
It should enter recovery in 5 to 10 seconds.
---------------------------
CoreELEC
I was able to boot CoreELEC via sdcard, with bluetooth and wifi working with the following device tree:
sm1_s905x3_4g_1gbit.dtb
I forgot to check the speed of the wifi, but if I recall, both 2.4 & 5ghz was working with that dtb.
---------------------------
TWRP
The TWRP_AML_ViT_3.3.1_2020.zip (in the Mega folder) is a "hinged" version. Not sure if its the right term, but it can be run from the stock recovery, (Apply update from external). It does NOT install, it just runs it and lets you do stuff from there.
If anyone knows the source or an update for the Amlogic TWRP Hinged version, please post it here.
I used a previous "hinged version" TWRP_322.zip but this version did not backup properly all the partitions, ex it totally skipped the Vendor partition, which is why I have 2 of these Tvboxes as my first one the backup was bad and it was essentially bricked.
---------------------------
Amlogic USB Burning Tool
This seems to work fine, but something that is always missing from peoples instructions,
The Male to Male USB cable, on this device must be plugged into the USB 3 port.
The power cable must also be removed, and when plugging in the USB cable to the correct port, will provide power for the "fastboot" equivalent mode needed to flash from the Amlogic tool.
So the procedure to flash is (after installing the USB Flash tool)
Device is powered off.
Insert USB cable into your pc end.
Insert tool and press recovery mode button.
Plug in other end of USB cable into the tvbox.
It should power on, keep the recovery button pressed until you hear the device connect to Windows (USB being plugged in sound)
They you should be able to flash.
---------------------------
Compatible ROMS
Long story short, due to a initial TWRP backup that was missing certain important partitions, I bricked my first box.
While trying to get the box working again, I have found the following firmware to work mostly. I am not reccomending them, as I am not sure they are working optimally, but if needed these can boot the system and work in some capacity.
X96Max_Plus_Q2_20201209-1446.img
Original firmware for X96 Max Plus Q2 version
sbx_x96max_plus_q2_v12
Slimbox Version 12 for X96 Max Plus Q2
This version does not come with Google framework which I needed so I didn't work with it much.
---------------------------
Magisk
Patched boot image for this device.
9.67 MB file on MEGA
mega.nz
Download and extract this file and put it somewhere you can flash from.
Install Magisk Manager.
Boot from Hinged TWRP, goto Install, Install image, select the file and flash to Boot partition. BE CAREFUL AND DON'T FLASH TO BOOTLOADER
Magisk Should be working, try running a root app and magisk should pop up
Magisk is complicated. On all the Amlogic boxes as far as I know, Magisk will install but NOT function properly.
The geniuses at 4pda have figured out a procedure to make Magisk work properly, but it requires hex editing the boot partition and reflashing it.
I have done the procedure successfully when I was using the X96Max_Plus_Q2_20201209-1446.img firmware. It does work.
I will upload this to the mega folder when I have time.
When I manage to hex edit the stock boot image, I will also upload it. Its an involved process and takes some time.
Reserved for future shenanigans.
my device has the same mainboard as you mentioned above ,but mine is 4/64 , my device bricked after burning non related image and after i plug in the power , for first 5 minutes nothing happens and then in vfd it shows boot and then clock and on tv screen only boot logo appears after 5 min but non consistent if you change tv source and back again it shows no hdmi connection and nothing more happens.
i tried out all p3 version of x96 air images but useless because they have different main board i wanted to try your dd imade backup (twrp is impossible bacause of no recovery) and burn it with amlogic usb tool but extraction of image ended with error with more than 15 gigabytes .
i appreciate anyone who can help me to unbrick my device , i am hopeless because this device has no support mine is named,x96 air 4/64
effgee said:
Hi everyone,
Updates:
2021-08-17 - Added patched Magisk boot for this device. (Conceptum Stock ROM)
I'm starting this thread to collect information and files regarding this particular version of X96 box and to explain to anyone interested what I have discovered so far..
The company who has repackaged the firmware for this box for the Greek market, CONCEPTUM, refuses to release the original firmware for this device.
So currently, I have dumped two types of firmware from a stock box in case it is needed. A standard TWRP backup, and a dd image.
At the moment, I actually am NOT having any luck restoring the firmware using the TWRP restore. Not sure why.
I was able to restore the original firmware using the dd image. So for anyone who screws up their stock firmware, you can use the dd image from the mega drive. Punchline: The stock image has terrible wifi speed as well. I have yet to try restoring the firmware via dd yet but when I do I will write if it works or not.
Here is a link to the folder where I will be updating what compatible files I can find.
4.38 GB folder on MEGA
13 files and 6 subfolders
mega.nz
This post is very incomplete and I will be adding to it shortly.
--------------------------------------
SPECIFICATIONS
4GB RAM/32GB Storage
Ethernet Speed: 1000mbps / 1gbs
Ethernet Chipset: Realtek RTL8211F
Wifi : 5ghz & 2.4 ghz support
Wifi / Bluetooth Chipset: Cdtech 4761743 (which is a Qualcomm QCA6174A design? See links below.)
https://discourse.coreelec.org/t/looking-for-users-with-no-working-wifi-or-bt/9649/248
https://discourse.coreelec.org/t/looking-for-users-with-no-working-wifi-or-bt/9649/249
https://blog.csdn.net/u012851408/article/details/86605778
Motherboard Markings: BM805H_141 V3.2 20352 4020
Motherboard Sticker: 4+32+CDW ZF210129
---------------------------
How to get into recovery
The button needed to access recovery is hidden. It is deep inside the stereo jack. (You can see it if you shine a flashlight into there.
My suggested tool to press this button easily is a qtip with the cotton from one end removed.
Insert the tool, and press it in until you feel the click.
Apply power to the device and as soon as you can see the logo come on, release the tool pressure.
It should enter recovery in 5 to 10 seconds.
---------------------------
CoreELEC
I was able to boot CoreELEC via sdcard, with bluetooth and wifi working with the following device tree:
sm1_s905x3_4g_1gbit.dtb
I forgot to check the speed of the wifi, but if I recall, both 2.4 & 5ghz was working with that dtb.
---------------------------
TWRP
The TWRP_AML_ViT_3.3.1_2020.zip (in the Mega folder) is a "hinged" version. Not sure if its the right term, but it can be run from the stock recovery, (Apply update from external). It does NOT install, it just runs it and lets you do stuff from there.
If anyone knows the source or an update for the Amlogic TWRP Hinged version, please post it here.
I used a previous "hinged version" TWRP_322.zip but this version did not backup properly all the partitions, ex it totally skipped the Vendor partition, which is why I have 2 of these Tvboxes as my first one the backup was bad and it was essentially bricked.
---------------------------
Amlogic USB Burning Tool
This seems to work fine, but something that is always missing from peoples instructions,
The Male to Male USB cable, on this device must be plugged into the USB 3 port.
The power cable must also be removed, and when plugging in the USB cable to the correct port, will provide power for the "fastboot" equivalent mode needed to flash from the Amlogic tool.
So the procedure to flash is (after installing the USB Flash tool)
Device is powered off.
Insert USB cable into your pc end.
Insert tool and press recovery mode button.
Plug in other end of USB cable into the tvbox.
It should power on, keep the recovery button pressed until you hear the device connect to Windows (USB being plugged in sound)
They you should be able to flash.
---------------------------
Compatible ROMS
Long story short, due to a initial TWRP backup that was missing certain important partitions, I bricked my first box.
While trying to get the box working again, I have found the following firmware to work mostly. I am not reccomending them, as I am not sure they are working optimally, but if needed these can boot the system and work in some capacity.
X96Max_Plus_Q2_20201209-1446.img
Original firmware for X96 Max Plus Q2 version
sbx_x96max_plus_q2_v12
Slimbox Version 12 for X96 Max Plus Q2
This version does not come with Google framework which I needed so I didn't work with it much.
---------------------------
Magisk
Patched boot image for this device.
9.67 MB file on MEGA
mega.nz
Download and extract this file and put it somewhere you can flash from.
Install Magisk Manager.
Boot from Hinged TWRP, goto Install, Install image, select the file and flash to Boot partition. BE CAREFUL AND DON'T FLASH TO BOOTLOADER
Magisk Should be working, try running a root app and magisk should pop up
Magisk is complicated. On all the Amlogic boxes as far as I know, Magisk will install but NOT function properly.
The geniuses at 4pda have figured out a procedure to make Magisk work properly, but it requires hex editing the boot partition and reflashing it.
I have done the procedure successfully when I was using the X96Max_Plus_Q2_20201209-1446.img firmware. It does work.
I will upload this to the mega folder when I have time.
When I manage to hex edit the stock boot image, I will also upload it. Its an involved process and takes some time.
Click to expand...
Click to collapse
i have a full twrp backup but unable to go to recovery to unbrick my device or will you change twrp backup to img file so that i can burn that with usb burning tool ? full detail of the problem in the previous post
reza0511 said:
i have a full twrp backup but unable to go to recovery to unbrick my device or will you change twrp backup to img file so that i can burn that with usb burning tool ? full detail of the problem in the previous post
Click to expand...
Click to collapse
Regular Air firmware's do not work.
P1-P3 don't work for sure, P4 I don't know but I think not.
I haven't found a photo yet of the P4 hardware.
Try USB Flashtool 4/64 image for X96Max_Plus_Q2 to get your recovery back if such a firmware exists, otherwise try the 4/32. X96 Max Plus Q2 firmware (X96Max_Plus_Q2_20201209-1446.img)
You should be able to get recovery back via flashing one of those images.
X96 Max Plus Q2 firmware is compatible, but if you use the 4/32 image you will only see the half of your storage.
Restoring your TWRP full backup again once you get the max firmware (for twrp) installed will not work unfortunately. Already went through this.
reza0511 said:
my device has the same mainboard as you mentioned above ,but mine is 4/64 , my device bricked after burning non related image and after i plug in the power , for first 5 minutes nothing happens and then in vfd it shows boot and then clock and on tv screen only boot logo appears after 5 min but non consistent if you change tv source and back again it shows no hdmi connection and nothing more happens.
i tried out all p3 version of x96 air images but useless because they have different main board i wanted to try your dd imade backup (twrp is impossible bacause of no recovery) and burn it with amlogic usb tool but extraction of image ended with error with more than 15 gigabytes .
i appreciate anyone who can help me to unbrick my device , i am hopeless because this device has no support mine is named,x96 air 4/64
Click to expand...
Click to collapse
You have a Conceptum box or just the same motherboard?
If you have a Conceptum, you are pretty much ****ed. They wont release the original firmware. You will have to buy a second box and get the image via dd.
I had to buy a second box and get the disk image via dd, and then restore the dd image using dd from within TWRP, overwriting the entire storage with the image. This was using the terminal built into TWRP.
In general, restoring from TWRP doesn't work well on these boxes, especially going from rom to rom as the partition layouts are different and TWRP doesn't handle it correct.
Conversion of the dd image to usb flashable is tricky and I haven't done it.
The person that MAY be able to do such a thing is Ricky ( https://forum.xda-developers.com/t/...w-milestone-donate-version-available.3786991/ ) but I dont know and I don't think there is any point as my dd image has partition layout for 32 gb version, you will lose half your storage unless he can also expand the partition.
Even if you manage to get TWRP back, there will probably be a partition layout difference from the firmware you use to get TWRP on the box, and the TWRP image backup you did. It probably will not work.
You need to get your original firmware, or a dd image of the same box.
You can also use the Slimbox for x96max_plus_q2. I did NOT like Slimbox 12 because it was missing google play and a lot of other things. But it will restore recovery.
solved !!
i save my box by below two steps
1- burning veitnami atv version of x96air img file (google for link )
2- restoring my full twrp via recovery
reza0511 said:
решено !!
Я сохраняю свою коробку, выполнив следующие два шага
1- сжигание veitnami atv версии файла img x96air (гугл для ссылки)
2- восстановление моего полного twrp через рекавери
Click to expand...
Click to collapse
is there a link?
Я уже решил свой вопрос. Спасибо за ваш сайт. Меня интересовало восстановление кирпича x96air_100. Я из Украины.
I have already solved my question. Thank you for your site. I was interested in the restoration of the brick x96air_100. I am from Ukraine.
How you did get MAGISK working? I own x96 AIR P3 and would like to use MAGISK
Soldiaz said:
How you did get MAGISK working? I own x96 AIR P3 and would like to use MAGISK
Click to expand...
Click to collapse
Hi.
To get Magisk working, its a bit of a difficult process.
Essentially, Amlogic released / built their kernels with a kernel boot option "skip_initramfs" which magisk needs "want_initramfs" for this to work.
The process is complicated as you must hex edit your boot.img after you have patched it with the Magisk Manager patching method called "Recovery Mode"
4pda where this was discovered - https://4pda.to/forum/index.php?showtopic=774072&st=25020#entry91068157
Video from 4PDA that shows the hex editing process - https://mega.nz/file/pJ1RTChR#b5rLNs-4GF2qlZXKzbL0P5lmAeLLYObJ_w3_Yf8h16U
You can also get the video from the above thread but if I recall you must register to download and unless you know russian its difficult to register there.
A guide I wrote that you can follow along with the video to understand the process - https://rentry.co/wgu9u
Every detail matters, I studied the video for many hours to understand the process, good luck.
My thread about this process here: https://forum.xda-developers.com/t/...ide-to-accompany-video.4320923/#post-85493037
Thanks!!!! Dam looking not that easy .
The Boot img from x96 Air you edited, is it Stock?
Sorry i dont check my mesages here very often.
I don't know which boot image you are talking about, it would be very helpful for you to link me which one specifically I need to answer the question for..
If you are talking about the image for my Air Extreme, it is stock and patched by magisk, and then hex edited for magisk. But I dont know its compatibility for any of the other Air versions.
effgee, just wanted to let you know there is a lot of information and multiple versions of the X96 Air TV Box Firmware available at...
Original Google link... (Vietnamese)
https://www.google.com/url? sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiDtPO9yZj0AhUOXM0KHYnzCIUQFnoECA8QAQ&url=https %3A%2F%2Ftinhte.vn%2Fthread%2Ftong-hop-cac-ban-firmware-cua-android-tv-box-x96- air.3050996%2F&usg=AOvVaw1it1QO7hR_e5XsrdSZH-Rj
Google Translated (English) link...
https://tinhte-vn.translate.goog/thread/tong-hop-cac-ban-firmware-cua-android-tv-box-x96-air.3050996/? _x_tr_sl=vi&_x_tr_tl=en&_x_tr_hl=en&_x_tr_pto=nui,sc
Direct link... (Vietnamese)
https://tinhte.vn/thread/tong-hop-cac-ban-firmware-cua-android-tv-box-x96-air.3050996/
"X96 Air" search via direct link... (Vietnamese)
https://tinhte.vn/search/333184298/?q=x96+air&o=relevance
Hope they help!
Mr350
Ps... If you have trouble with the Google translation links not working try a Google search for... x96 air tinhte.vn ... that might work then click Translate this page.
Hello, I am actually brand new to xda-developers, I have did something stupid I guess... So, I had stock firmware and I already have it rooted and installed twrp. At this point, I have tried many many things and it is telling me No OS now with TWRP (I boot-looped it by uninstalling bixby :v) and wiped the data, formatted it, and all of that and more. I keep getting errors with everything, the most common ones I seen is ERROR: 1 and ERROR: 7, I know this is useless information but I had one about updating dynamic partitions with trying to install Lineage OS. I tried installing GApps thinking that would fix it, it tells me that it is made for ROM 11.0.x and told me to download the one for my ROM: 11 (SDK 29). I have no clue what that means or anything, but to me, it seems I have pretty much screwed up my phone somehow all from uninstalling Bixby.
Odin will not work, I have installed the right Samsung drivers (my windows PC is ****ed too, majorly somehow. Might have something to do with it).
ADB will not recognize my device, in twrp recovery or download mode. ADB Sideload function of twrp does not load (sits there forever).
I really, really need help. Please.
TL;DR
Uninstalled Bixby with Lucky Patcher and System App Remover, phone decided to reboot hours later and got stuck in boot-loop.
I have not been able to do anything flashing wise. ADB does not work, so I am stuck transferring files to/from my PC with a USB stick w/ OTG Adapter. It seems to work ok, as I was successful in flashing TWRP recovery (updated it from somewhere).
I need my phone, and it does not function in its current state and I am clueless on what to do (I get all sorts of errors that seem unfixable).
I last had Android 11 (stock firmware) on my phone before it was boot-looped.
Exact Phone: [Excuse me if I am not allowed to post links, but it is just to amazon of the phone I bought if it helps anyone] https://www.amazon.com/dp/B082YF7WY5
TWRP Version: 3.5.0_10-A11_1b1
Samsung Galaxy A51 A515F 128GB DUOS GSM UnlockedUS Compatible LTEExynos 9611 Chipset
Fastest way to contact me: Cyberhound#5672 on Discord.
I will try to respond as fast as I can, but I am without a phone :/
NOTE: I have resolved this issue.
I flashed stock firmware using OTG (just the .img's) and then reinstalled Samsung USB Drivers, restarted my computer, connected an old phone that worked so I could verify if the USB Driver was working (and so ADB as well).
I reconnected in TWRP Recovery, and it worked and showed up on Odin.
I was able to flash stock firmware successfully.