Has anyone found one?
Just got a Z3 play. Had a Z, and my wife has a Z2 play. No trouble getting a bumper for those phones, but can't find one for the Z3 play. It's bumming me out, cause I have troubles with extra screen touches from my hand without the bumper. But definitely need to use mods with it, so other cases are out.
Hopefully someone makes one soon. :fingers-crossed:
I'd watch Sprint and US Cellular's sites once the Z3 Play is available from them. Verizon made the best bumper for the Z and Z2 series, but since they aren't carrying the Z3 Play they won't make one. Hopefully either Sprint or USC will make a bumper. Otherwise I wouldn't hold my breath since there were very few aftermarket bumpers for the Z or Z2 Play.
In also looking for a bumper case for this phone. I hope they make one for us like the z play and play 2.
I wonder if those bumpers with the clear back, would work with the back neatly cut out. Might risk 7 bucks to try it.
Darth said:
I wonder if those bumpers with the clear back, would work with the back neatly cut out. Might risk 7 bucks to try it.
Click to expand...
Click to collapse
Please report back if you give it a try!
Stanleywinthrop said:
Please report back if you give it a try!
Click to expand...
Click to collapse
Just ordered this, and going to conduct surgery to remove the back. Wish me luck!
https://www.amazon.com/Rnicy-Shockp...i+z3+rnicy&dpPl=1&dpID=31TWxWrO-jL&ref=plSrch
@Darth
I wish you good luck, indeed.
My opinion is that *any* bumper or cover will make it hard to reach the sidemounted fingerprint. it sits deeper. With Sony devices, I only used snap-on hard cover with a cutout for the sensor. Which is obviously not possible for the Z1-3 series.
Another issue forced me to dump my expensive Z2 Play Verizon Bumper: It makes the phone too large, so that I can't hold it securely with my short fingers. Two-handed usage, even without...
My solution was to use a full screen protector to prevent scatches while pulling phone out of pocket or screen facing the table. The back side has it's Mod on. This is surely no drop protection onto the edge, but this is a risk I have to live with.
dieterhaack said:
@Darth
I wish you good luck, indeed.
My opinion is that *any* bumper or cover will make it hard to reach the sidemounted fingerprint. it sits deeper. With Sony devices, I only used snap-on hard cover with a cutout for the sensor. Which is obviously not possible for the Z1-3 series.
Another issue forced me to dump my expensive Z2 Play Verizon Bumper: It makes the phone too large, so that I can't hold it securely with my short fingers. Two-handed usage, even without...
My solution was to use a full screen protector to prevent scatches while pulling phone out of pocket or screen facing the table. The back side has it's Mod on. This is surely no drop protection onto the edge, but this is a risk I have to live with.
Click to expand...
Click to collapse
Dang, think I just wasted some cash. LoL
Didn't even think about the fingerprint sensor, which I really don't want to lose. Ah well, I'll have a lightweight case that still lets the nice looking back be seen, that I can use when I don't need the battery mod. Which I don't think I need much really, the battery life has been awesome for me.
My Z had a fried battery I'm sure, would barely last an hour and a half of use. So the battery mod was a full time necessity. Not the Z3 play though. Doubt I need it except as emergency power when I'm not near a plug, or for sitting on the couch.
So I got the case delivered that I linked above. And got to cutting the rubber sides off of the harder clear back.
The bumper does have a cut out for fingerprint scanner and works fine. So that's good! I rushed and my cutting job is really not nice. That's on me. A sharper utility knife blade and taking my time more would have made for a much neater cut. Did it on a breadboard and was extremely careful not to slip and cut a corner open. Really took time cutting out the corners.
I basically cut right along the edge of the hard clear back plastic. My knife was kinda dull though. Was too impatient to get a new blade for it.
But, success! It's on, stays on, and my battery mod is on. It's way flimsier than my Z's old bumper or my wife's Z2 play bumper, but those were thicker cause they were made without backs and made thicker. So the sides move a bit and are a wee bit floppy, but the corners are tight, so it stays on.
Aside from the back being a bit ugly cause of my bad cut, which I'll try to tidy up later, it does work. Just a but flimsy. But I still prefer it to no bumper, for me personally.
I'll probably only use it at home, and will definitely buy a real one if someone ever makes one. I'd like a thicker more sturdy one for sure.
**Try at your own risk and satisfaction not guaranteed.** :laugh:
Darth said:
So I got the case delivered that I linked above. And got to cutting the rubber sides off of the harder clear back.
The bumper does have a cut out for fingerprint scanner and works fine. So that's good! I rushed and my cutting job is really not nice. That's on me. A sharper utility knife blade and taking my time more would have made for a much neater cut. Did it on a breadboard and was extremely careful not to slip and cut a corner open. Really took time cutting out the corners.
I basically cut right along the edge of the hard clear back plastic. My knife was kinda dull though. Was too impatient to get a new blade for it.
But, success! It's on, stays on, and my battery mod is on. It's way flimsier than my Z's old bumper or my wife's Z2 play bumper, but those were thicker cause they were made without backs and made thicker. So the sides move a bit and are a wee bit floppy, but the corners are tight, so it stays on.
Aside from the back being a bit ugly cause of my bad cut, which I'll try to tidy up later, it does work. Just a but flimsy. But I still prefer it to no bumper, for me personally.
I'll probably only use it at home, and will definitely buy a real one if someone ever makes one. I'd like a thicker more sturdy one for sure.
**Try at your own risk and satisfaction not guaranteed.** :laugh:
Click to expand...
Click to collapse
Thanks Darth! Can you keep us updated about how it holds up?
You'd think someone wouldn't made an official one by now. It uses less plastic to make a bumper.
Finally found one on sale on amazon! If anyone gets it, please give impressions.
It's aluminium so Idon't know how it will work with the fingerprint sensor. Reviews say it's a bit too thick to place your finger correctly. Now that verizon is supplying the Moto Z3 they might release a rubber bumper like the ones for the moto Z and Z2. I'll wait and see.
Moto Z3 Play Case,Dngn Luxury [Aluminum Alloy Frame Bumper
https://www.amazon.com/Dngn-Luxury-Aluminum-Shockproof-Motorola/dp/B07FYBRSKH/ref=sr_1_15?ie=UTF8&qid=1533592842&sr=8-15&keywords=moto+z3+bumper
This looks to be more of the same by another dealer but the pics show no figerprint sensor. Reviews do say there is one though.:
https://www.amazon.com/HikerClub-Aluminum-Pattern-Silicone-Motorola/dp/B07F6C3HHX/ref=sr_1_7?ie=UTF8&qid=1533594325&sr=8-7&keywords=moto+z3+bumper#customerReviews
jayb222 said:
Finally found one on sale on amazon! If anyone gets it, please give impressions.
It's aluminium so Idon't know how it will work with the fingerprint sensor. Reviews say it's a bit too thick to place your finger correctly. Now that verizon is supplying the Moto Z3 they might release a rubber bumper like the ones for the moto Z and Z2. I'll wait and see.
Moto Z3 Play Case,Dngn Luxury [Aluminum Alloy Frame Bumper
https://www.amazon.com/Dngn-Luxury-Aluminum-Shockproof-Motorola/dp/B07FYBRSKH/ref=sr_1_15?ie=UTF8&qid=1533592842&sr=8-15&keywords=moto+z3+bumper
This looks to be more of the same by another dealer but the pics show no figerprint sensor. Reviews do say there is one though.:
https://www.amazon.com/HikerClub-Aluminum-Pattern-Silicone-Motorola/dp/B07F6C3HHX/ref=sr_1_7?ie=UTF8&qid=1533594325&sr=8-7&keywords=moto+z3+bumper#customerReviews
Click to expand...
Click to collapse
I have one like this, from eBay, for the Z2 Play. The "bumper" does not stay on the phone, without the back of the case attached. Even with a Mod attached to the phone it does not seem like the "bumper" portion will remain on the phone. It is very loose.
pizza_pablo said:
I have one like this, from eBay, for the Z2 Play. The "bumper" does not stay on the phone, without the back of the case attached. Even with a Mod attached to the phone it does not seem like the "bumper" portion will remain on the phone. It is very loose.
Click to expand...
Click to collapse
I saw a review saying the same. Disappointed.
Darth said:
I saw a review saying the same. Disappointed.
Click to expand...
Click to collapse
pizza_pablo said:
I have one like this, from eBay, for the Z2 Play. The "bumper" does not stay on the phone, without the back of the case attached. Even with a Mod attached to the phone it does not seem like the "bumper" portion will remain on the phone. It is very loose.
Click to expand...
Click to collapse
Well that is disappointing. Oh well, I'm waiting on you Verizon. Provide us with that little piece of plastic. Anyone for that matter!
Also this case I have for my z2force and it interferes with reception of the antennas. Had it on for ten minutes then just threw it into the trash. I had a company I reached out to and said they were making some.I bought one of theirs for the force 2 and it was hands down best bumper I had..
Sent from my Moto Z3 Play using Tapatalk
kenbrownstone said:
Also this case I have for my z2force and it interferes with reception of the antennas. Had it on for ten minutes then just threw it into the trash. I had a company I reached out to and said they were making some.I bought one of theirs for the force 2 and it was hands down best bumper I had..
Click to expand...
Click to collapse
Name of company?
pizza_pablo said:
Name of company?
Click to expand...
Click to collapse
The same one u we're talking about.. Also got it in the Moto z play version and it was worse on reception and wouldn't stay on ,was to big..If they would've been better I would buy for my z3
Sent from my Moto Z3 Play using Tapatalk
pizza_pablo said:
Name of company?
Click to expand...
Click to collapse
Just got this
Sent from my Moto Z3 Play using Tapatalk
Related
Its on the general "screen protectors" thread, but these are so great they need to be announced in their own
no, its not just for announcing their availability (EVEN THOUGH IT IS http://www.spigen.com/cell-phone/ht...-screen-protector-steinheil-ultra-series.html -- hell yeah!!), its for discussion too. I'd be happy to post pics of the shield upon arrival
These are easily the best screen protector out there in terms of strength, durability, texture, and light transmittence. I know there are legions of us that were holding out for these to finally go on sale.
now, to get ultra crystal or ultra fine?
EDIT: i ordered ultra crystal and it came out to ~$17. btw, im not sure if buying through amazon does the same, but ordering from the sgp website has always landed me with TWO protectors *hint hint*
I take it the ultra crystal is the clearest, whereas ultra fine reduces fingerprint smudges more? How noticeable is it with either that you have a screen protector on?
ultra crystal - completely invisible except at the edges were the protector obviously ends its surface is extremely glass-like
ultra fine - like any anti-glare/anti-fingerprint it has that matte-like texture/appearance so it'll be noticeable (i've only ordered ultra crystal)
neeevermind
Thanks. Not sure if I actually need a screen protector or not, but I decide to get one, it sounds like the ultra crystal is the one I'll pick. Are these dry or wet application?
suprmallet said:
Thanks. Not sure if I actually need a screen protector or not, but I decide to get one, it sounds like the ultra crystal is the one I'll pick. Are these dry or wet application?
Click to expand...
Click to collapse
I was wondering that too. Looked it up on youtube (also to see the quality) and they're dry application.
too many optionsssssssss
wonder if this will affect the proximity sensor ... looks like the protector covers everything
Freelancerx said:
wonder if this will affect the proximity sensor ... looks like the protector covers everything
Click to expand...
Click to collapse
I was just wondering the same thing...
yup I knew I should have said somewhere that they're dry installs.. ever since I tried skinomi in my E4GT and got water damage from the stupid wet install I'm strictly going dry from now on, even if it was just a fluke that one time.
Steinheil is usually top quality with their protectors so I'm sure the sensor will me accommodated for, I'll certainly report back when I get it.
As for NEEDing it, it's totally debatable. I've gone a couple weeks without and not a problem. It just gives peace of mind and since the ultra crystal is almost nonexistent its pretty much a win-win
NOTE: the picture on the Site is not accurate to what you'll get (looked at the advertised picture of the E4GT and it looked like there were no cutouts but there are when u get it)
Will definitely check back on your experience with these. I have ultra clear version on my OG evo and have been pleased with the results. I'm considering going without, but if these are good, I may just have to get them for the peace of mind.
Ordered mine. You can also buy via Amazon (sold by SGP).
The crystal ones are perfect. You can't tell that you have a screen protector. They last the longest, are the most scratch resistant and you don't have to put water near your phone.
I've been waiting (carefully) until these came out. Now I can feel better about not getting a random scratch on my screen.
I was going to go without a screen protector, but I may give these a try. So many people seem to speak highly of them.
May wait for someone to confirm that the proximity sensor works properly with one of these installed.
funcrusher said:
I was going to go without a screen protector, but I may give these a try. So many people seem to speak highly of them.
May wait for someone to confirm that the proximity sensor works properly with one of these installed.
Click to expand...
Click to collapse
If installed correctly, you won't even notice a difference (using the Crystal). Plus you can feel safe about accidently putting your phone in the pocket with your keys, etc.
The only pain with installing is making sure you start to lay it down correctly. Unlike the water methods, you can't really shift it after you lay it down. The protector is a tight fight so your hands have to be on their 'A' Games. If you miss slightly, you have to pick up and retry, which could lead to random dust floating in.
Luckily, they usually give you two. So if you screw up royally with one, you get a second chance.
I've used dry protectors ever since I seen how absolutely terrible the zagg ones are. I did order an xo skin which makes me sad after seeing this. I'll wait for a review/pix and prolly order one anyway
Sent from my EVO using xda premium
purock said:
If installed correctly, you won't even notice a difference (using the Crystal). Plus you can feel safe about accidently putting your phone in the pocket with your keys, etc.
The only pain with installing is making sure you start to lay it down correctly. Unlike the water methods, you can't really shift it after you lay it down. The protector is a tight fight so your hands have to be on their 'A' Games. If you miss slightly, you have to pick up and retry, which could lead to random dust floating in.
Luckily, they usually give you two. So if you screw up royally with one, you get a second chance.
Click to expand...
Click to collapse
I'm getting anxiety just thinking about installing it. I HATE installing screen protectors.
I think you get two in one pack, correct?
Rippley05 said:
I've used dry protectors ever since I seen how absolutely terrible the zagg ones are. I did order an xo skin which makes me sad after seeing this. I'll wait for a review/pix and prolly order one anyway
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I ordered an XO skin for insurance. But when it came in the mail and I saw that it was a wet/soap deal, I said 'oh hell no'. I prefer the dry installation. Just have to be careful with dust.
funcrusher said:
I'm getting anxiety just thinking about installing it. I HATE installing screen protectors.
I think you get two in one pack, correct?
Click to expand...
Click to collapse
Yep it comes with two. Only once did I have to abandon the first try and move on to the second one. I don't like installing them either, but I feel much better after I do. I feel much better installing a dry one like this (at least you can't really screw up the phone).
Looks like mine has shipped already. I'll let you know how they fit, apply, interaction w/ proximity sensor, etc.
Ran across a link to this somewhere.......haven't tried it yet myself, but it looks like it would keep it in the right place. Have to try it when I get my phone.....hopefully sometime soon.
http://www.youtube.com/watch?v=_oJX99p3kEc
Thanks for the info. Ordered for my dad.
I've bought sgp ultra crystal on my galaxy s2. It's super clear and it's STILL on my device. I only see ultra crystal & fine for EVO 4G LTE. Hopefully they release oleophobic one, as well.
twoashj said:
Thanks for the info. Ordered for my dad.
I've bought sgp ultra crystal on my galaxy s2. It's super clear and it's STILL on my device. I only see ultra crystal & fine for EVO 4G LTE. Hopefully they release oleophobic one, as well.
Click to expand...
Click to collapse
yup its still on my S2 as well and I envy it bc I actually like it BETTER than the glass. sometimes the glass can be hard to navigate bc it doesn't have enough oil on it, but that's never a problem with the ultra crystal on it. like someone said earlier, ultra crystal is perfect.
I'll make an installation video when mine comes in which will probably be Friday or Saturday, I'm no professional though so don't expect too much. the method that they demo in their install videos on their Site works very well. It also comes with stickers to help lift the protector and take out dust specks if any get trapped under the film. you just need to find a clean, dust free environment to install it - like a murky bathroom after a hot shower
I currently have the Galaxy Mega and absolutely love it...that being said when i saw the google play edition of the Z ultra last night I got a bit envious. has anyone come from the mega and if so what are your thoughts? i know there is little size difference but what were your impressions?
obviously, i'm fine with big phones but i'm concerned about the camera since i have an infant and taking pictures is actually important to me now.
also, i am wondering if you can use the Samsung MHL cable on the XZU as i use mhl daily. would be nice not to have to buy another cable.
I have no experience with the Mega, but your MHL cable won't work. Samsung MHL adapters are 11 pins while the rest are 5 pins. Non-Samsung adapters are very cheap though ($10 bucks)
Sent from my C6833 using Tapatalk
I came from a Mega:
This is so much more powerful. Like, crazy powerful. It completely devastates the Mega. It's noticable the second you start using it, its just so fast and smooth.
The second big improvement is the screen. The Mega has an awesome screen for 720p, but the panel in the Ultra is epic.
The third big improvement is surprisingly battery life! The Ultra is considerably better.
Fourth big improvement is in signal quality. I am UK based so don't use LTE currently, but 3G the Ultra gets a stronger signal pretty much everywhere.
It's waterproof, which is never a bad thing.
Oh and I nearly forgot... Roms. There is already an excelent CM10.2 build available for the Ultra, as well as a fair few other roms and obviously the GPE just got announced and that will bring a tidal wave of very high quality roms. The Mega development section on the other hand is virtually a barren wasteland, and being both underpowered and Touchwiz inflicted it is in desperate need of a decent AOSP build. The Ultra is actually fine stock ironically, Sony only lightly skin Android and the stock rom is near-AOSP anyway.
On the downsides:
The Mega did fit in my pocket better, though I still keep my Ultra in the front pocket of my jeans just as I did with my Mega. The angular design looks good, but it is a little impractical on a device this big.
The touchscreen is prone to occasional mistouches, mainly if it's dirty. Not a big issue by any means, but a minus point non the less.
The camera is much better on the Mega, particularly in low light.
The "ASF" screen protection fitted as standard is stupid. It's plastic based, so it will scratch considerably easier than the strengthened glass beneath it and doesn't feel as nice under the finger. If you remove the film, which took me about 3 hours, the glass underneath doesn't have any oleophobic coating and so gets dirty easily. I plan on buying some of the Fusso replacement oleophobic coating on the net soon to resolve this once and for all, but that costs £20 and it shouldn't be necessary.
For me, the Ultra is the MUCH better phone. I'm really happy with mine, probably the best phone I have ever owned. :good:
i just returned my mega to buy a z ultra play edition, the mega wasn't powerful enough and didn't have enough customization options for me.
stiggy2012 said:
I came from a Mega:
This is so much more powerful. Like, crazy powerful. It completely devastates the Mega. It's noticable the second you start using it, its just so fast and smooth.
The second big improvement is the screen. The Mega has an awesome screen for 720p, but the panel in the Ultra is epic.
The third big improvement is surprisingly battery life! The Ultra is considerably better.
Fourth big improvement is in signal quality. I am UK based so don't use LTE currently, but 3G the Ultra gets a stronger signal pretty much everywhere.
It's waterproof, which is never a bad thing.
Oh and I nearly forgot... Roms. There is already an excelent CM10.2 build available for the Ultra, as well as a fair few other roms and obviously the GPE just got announced and that will bring a tidal wave of very high quality roms. The Mega development section on the other hand is virtually a barren wasteland, and being both underpowered and Touchwiz inflicted it is in desperate need of a decent AOSP build. The Ultra is actually fine stock ironically, Sony only lightly skin Android and the stock rom is near-AOSP anyway.
On the downsides:
The Mega did fit in my pocket better, though I still keep my Ultra in the front pocket of my jeans just as I did with my Mega. The angular design looks good, but it is a little impractical on a device this big.
The touchscreen is prone to occasional mistouches, mainly if it's dirty. Not a big issue by any means, but a minus point non the less.
The camera is much better on the Mega, particularly in low light.
The "ASF" screen protection fitted as standard is stupid. It's plastic based, so it will scratch considerably easier than the strengthened glass beneath it and doesn't feel as nice under the finger. If you remove the film, which took me about 3 hours, the glass underneath doesn't have any oleophobic coating and so gets dirty easily. I plan on buying some of the Fusso replacement oleophobic coating on the net soon to resolve this once and for all, but that costs £20 and it shouldn't be necessary.
For me, the Ultra is the MUCH better phone. I'm really happy with mine, probably the best phone I have ever owned. :good:
Click to expand...
Click to collapse
thanks for the help.
some of the things that make me weary of the XZU - i think the sharp pretty much sucks and prefer the rounded corners. i'm not sure if it being a bit bigger will be much of a problem or not. i went to the store to try to find one and its not in stock anywhere yet.
i really want a stock android experience though and i'll never ever get that on the Mega since they'll never get MHL to work and i use mhl daily with my appradio 2 and must have it.
that google play edition is so so tempting...i better not even mention i bought another phone after just getting the mega 6 weeks ago.
is it at all easier to use being so much thinner? i didn't think that would matter though in ease of use but not sure.
It's actually ridiculously thin. I have a hard time picking it up from the table. It's almost like trying to pick something flat off the ground and you can't really get a grip. It would've been brutal for the pockets if it was thicker.
Sent from my C6833 using Tapatalk
LordManhattan said:
It's actually ridiculously thin. I have a hard time picking it up from the table. It's almost like trying to pick something flat off the ground and you can't really get a grip. It would've been brutal for the pockets if it was thicker.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
do you use a case with it?
i am also confused about this screen protector? is it a protector just built onto the phone that most people don't like or remove but its really hard to take off? i haven't seen any reviews mentioning it.
I'm not using a case. I like to use my devices naked. The screen protector is an "Anti shatter film" that's preventing glass from shattering once you break it. You may remove it if you want to, but I've heard that it takes like three hours to do it since it's really thin and it breaks into tiny pieces. It's not a good protector, so the oleophobic layer (anti smudge) layer will start to come of after some use. Also, since it's a plastic sheet, using pens on it to take notes or draw isn't recommended since it will naturally scratch it. Sony sure employed a brainiac to do this job, and I can't understand why they would do this.
Either way, that's just how it is. You won't notice or even see the protector, and if you get scratches, you can remove it and use your own protector. It just takes a lot of time. You can read all about it in a thread that's lying around here some place.
Sent from my C6833 using Tapatalk
knives of ice said:
do you use a case with it?
i am also confused about this screen protector? is it a protector just built onto the phone that most people don't like or remove but its really hard to take off? i haven't seen any reviews mentioning it.
Click to expand...
Click to collapse
I'm using a black TPU case I got off ebay for £3, it doesn't add hadly any bulk but ofers decent protection.
I bought the Mega for the mrs. She wanted a large screen but doesn't need all the bells and whistles and see loves it and is used to TW having come from a note 2.
Honestly I like both devices, but for a hardcore tinkerer like me I had to have the Ultra.
baileyjr said:
I'm using a black TPU case I got off ebay for £3, it doesn't add hadly any bulk but ofers decent protection.
I bought the Mega for the mrs. She wanted a large screen but doesn't need all the bells and whistles and see loves it and is used to TW having come from a note 2.
Honestly I like both devices, but for a hardcore tinkerer like me I had to have the Ultra.
Click to expand...
Click to collapse
yes, i just wish there was somewhere i could go check out the device before buying it.
the biggest thing i think i will hate is that screen protector on the phone. that seems like the dumbest decision ever to put that on out of the factory.
there is a sony outlet store about 40min from me i wonder if they would have one, surely they would
knives of ice said:
yes, i just wish there was somewhere i could go check out the device before buying it.
the biggest thing i think i will hate is that screen protector on the phone. that seems like the dumbest decision ever to put that on out of the factory.
there is a sony outlet store about 40min from me i wonder if they would have one, surely they would
Click to expand...
Click to collapse
Give them a call and ask if they have it before you go out the door
knives of ice said:
yes, i just wish there was somewhere i could go check out the device before buying it.
the biggest thing i think i will hate is that screen protector on the phone. that seems like the dumbest decision ever to put that on out of the factory.
there is a sony outlet store about 40min from me i wonder if they would have one, surely they would
Click to expand...
Click to collapse
You can't see the factory fitted screen protector. I have a normal screen protector on top as well and its invisable if you take your time to install it carefully :thumbup:
Sent from my C6833 using Tapatalk 4
Yeah, you won't notice it at all unless you get some bad scratches. Just treat it as a gadget, and not a piece of meat, and you probably won't get any.
If you have an infant and pictures are key for you then avoid this phone like the plague. I have young kids also and this camera sucks. However otherwise the phone is very good in every other aspect.
knives of ice said:
I currently have the Galaxy Mega and absolutely love it...that being said when i saw the google play edition of the Z ultra last night I got a bit envious. has anyone come from the mega and if so what are your thoughts? i know there is little size difference but what were your impressions?
obviously, i'm fine with big phones but i'm concerned about the camera since i have an infant and taking pictures is actually important to me now.
also, i am wondering if you can use the Samsung MHL cable on the XZU as i use mhl daily. would be nice not to have to buy another cable.
Click to expand...
Click to collapse
I dont like Samsung products, bcuz they all look like sanitary napkins.
I'm waiting for my ZU to come in the mail I'm so excited coming from a Mega 6.3!
After playing with a friends ZU, the thing that I will appreciate most on the ZU is the faster processor and larger RAM, although I must admit I do wish the camera on it was a bit better with flash!! I'm a girl and I like to take selfies geez... :silly:
LordManhattan said:
I'm not using a case. I like to use my devices naked. The screen protector is an "Anti shatter film" that's preventing glass from shattering once you break it. You may remove it if you want to, but I've heard that it takes like three hours to do it since it's really thin and it breaks into tiny pieces. It's not a good protector, so the oleophobic layer (anti smudge) layer will start to come of after some use. Also, since it's a plastic sheet, using pens on it to take notes or draw isn't recommended since it will naturally scratch it. Sony sure employed a brainiac to do this job, and I can't understand why they would do this.
Either way, that's just how it is. You won't notice or even see the protector, and if you get scratches, you can remove it and use your own protector. It just takes a lot of time. You can read all about it in a thread that's lying around here some place.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
I owned the original Xperia Z and loved the mobile. Reviewers all gave it some negative feedback as when they sat in the kitchen they could not see the screen from the living room due to what they called "Poor viewing angles". I found this odd and got into all sorts of trouble on one review site, Trusted reviews, where they are anything but' trusted'.
I digress. The Z came with this new 'anti shatter film' Point is within only a few days of very respectful use I could actually see tiny marks on this laminate membrane. I spoke with the Sony importer here who advised me to fit a screen protector, in some countries they where sold with the screen protectors in the box. At that time this confused me as I thought both one and the other where the same thing? Not the case at all.
The anti shatter film is fitted as when the water resistant idea was in development the designers realised that customers would use them by a pool or near water like a beach. This caused some concern as if the phone got wet it became slippery and if dropped the screen could shatter and leave shards of glass all over the place where people could cut themselves (not to mention the cost of emptying and refilling a pool). To prevent any such problem and, I guess, avoid legal action? Sony fitted the new range of water resistant devices with these anti shatter films. Great idea.............
IN PRACTCE they have proved so soft they scratch far to readily and in terms of the Ultra it would be suicide to use a pencil on that anti shatter film.
here again is Sony being innovators of great new developments yet so often dropping the ball at the last hurdle!
I have a very decent screen protector fitted on my Ultra that I always order the same time I purchase any phone, phablet or tablet. I also always purchase a decent cover to further protect the device. I would like to use them without a cover but just cannot bare to think of scratching my devices. So good looking yet the cases do hide their good looks also add greatly to the bulk.
Life is all about compromise though.
I suggest comparing the Samsung mega against the Ultra is an unfair test to start with. Size being the only common denominator. With the exception of the camera, so I am told, the Ultra is made to a higher standard in terms of materials used in construction also the other operational hardware is more advanced. I am a Samsung fan but have never been a fan boy of any brand. Its a question of purchase what satisfies ones needs and requirements. I also own the SG Note 3 and gear, they are both now boxed and in a draw ready to sell.
Ryland
Hi guys.
So i've been thinking about buying either one of these devices.
i'm leaning more towards the z ultra because it's such a gorgeous device, but i don't know if i'll be able to carry it around like a regular smartphone and i've been seeing a lot of complaints about screens breaking.
i really wanted the opinion of you guys on this, how is it to use a z ultra in your daily routine, is it weird to walk around with it on your pocket?
the nexus 5 however, is a beautiful device aswell, but a 5" screen seems too small for me.
so, z ultra, might be too big and fragile?
and nexus 5, too small?
or maybe there is another device that can reach a mid-term?
pin70 said:
Hi guys.
So i've been thinking about buying either one of these devices.
i'm leaning more towards the z ultra because it's such a gorgeous device, but i don't know if i'll be able to carry it around like a regular smartphone and i've been seeing a lot of complaints about screens breaking.
i really wanted the opinion of you guys on this, how is it to use a z ultra in your daily routine, is it weird to walk around with it on your pocket?
the nexus 5 however, is a beautiful device aswell, but a 5" screen seems too small for me.
so, z ultra, might be too big and fragile?
and nexus 5, too small?
or maybe there is another device that can reach a mid-term?
Click to expand...
Click to collapse
It must be only me but the last phone I carried in my pocket was a Motorola flip phone years ago. I carry the ZU in a nylon tool holster pouch that clips on to my pants pocket (it also has a belt loop but it stays on fine with clip).
adfurgerson said:
It must be only me but the last phone I carried in my pocket was a Motorola flip phone years ago. I carry the ZU in a nylon tool holster pouch that clips on to my pants pocket (it also has a belt loop but it stays on fine with clip).
Click to expand...
Click to collapse
Carrying around a nylon tool holster is too ugly imo.
but i've seen a few videos and seems like it fits very well in most pants and shorts. want to know if it feels to heavy on the pocket? or weird?
pin70 said:
Carrying around a nylon tool holster is too ugly imo.
but i've seen a few videos and seems like it fits very well in most pants and shorts. want to know if it feels to heavy on the pocket? or weird?
Click to expand...
Click to collapse
IN my tighter pants (with smaller pockets) it sticks out a little and is noticeable, in all my shorts and most pants it's fine. Note I have mine in a flip cover so that adds some more bulk to the ZU.
blueether said:
IN my tighter pants (with smaller pockets) it sticks out a little and is noticeable, in all my shorts and most pants it's fine. Note I have mine in a flip cover so that adds some more bulk to the ZU.
Click to expand...
Click to collapse
Hmm nice to know. it realy amazes me how cheap this phone got, it's cheaper than the nexus 5 and the lg g2 and it has that massive screen.
btw, i saw a review from a guy saying it uses gorila glass 3, but i don't think it does, can anyone clear that out?
and, is there a chance of the screen breaking just by using it in a mildly tight pocket ? cause i've seen a lot of posts here saying the screen is very fragile.
The Z Ultra really isn't fragile: https://www.youtube.com/watch?v=C6Rf2q4b-24
Visa Declined said:
The Z Ultra really isn't fragile: https://www.youtube.com/watch?v=C6Rf2q4b-24
Click to expand...
Click to collapse
What about weight wise, does it weights in your pocket?
I don't find the phone to be heavy at all, especially for its size. It's freaking huge though, which can be a burden at times.
Visa Declined said:
I don't find the phone to be heavy at all, especially for its size. It's freaking huge though, which can be a burden at times.
Click to expand...
Click to collapse
What times? examples please .-. so i can see if that would be a problem for me.
pin70 said:
What times? examples please .-. so i can see if that would be a problem for me.
Click to expand...
Click to collapse
Carrying it around in your front pocket, which i do, can be uncomfortable when you're sitting down, bending, etc. I wear loose fitting jeans, and im 6-2", so it isn't too bad. This Phone is just plain huge though, and it will be a problem for some people.
Watch this video and check out this girl trying to stick it in her pocket.
https://www.google.com/url?sa=t&sou...MVGWeE8wxdZZuB-8Q&sig2=Ye2WtM06Kf2ZAvFZ9XGV9Q
Visa Declined said:
Carrying it around in your front pocket, which i do, can be uncomfortable when you're sitting down, bending, etc. I wear loose fitting jeans, and im 6-2", so it isn't too bad. This Phone is just plain huge though, and it will be a problem for some people.
Watch this video and check out this girl trying to stick it in her pocket.
https://www.google.com/url?sa=t&sou...MVGWeE8wxdZZuB-8Q&sig2=Ye2WtM06Kf2ZAvFZ9XGV9Q
Click to expand...
Click to collapse
Hmmm. firetruck! that just made me more unsure, cause the phone is extremely cheap right now with such an amazing hardware. would you happen to know any good phone with a screen bigger than or equal to 5.5 and same hardware for the same price?
You can buy a 1+
Doesn't have to buy where i'm going to buy.
is the lg g2 or nexus 5 any good?
Wait for the nexus 6 google it i was announced today
diamantericos said:
Wait for the nexus 6 google it i was announced today
Click to expand...
Click to collapse
Can't, it'll be released in november and i'll be doing a trip at the end of this month, and i'm going to buy the phone there cause it's way cheaper than where i live.
i'm still in doubt between the lg g2, nexus 5 or the z ultra :/
I had the nexus 5 and switched over to the xzu.. I have to say given the opportunity I'd take back my Nexus 5. Don't get me wrong performance wise and price they are both on par. I've installed a ported version of the Google play edition Rom and it works perfectly well. Downside is the size of this device,, it really is massive and I bought it thinking I would get use to it eventually... 2 months on and I'm still having a hard time getting use to holding it. Also I'm not sure if this issue is wide spread but the screen on this thing is super sensitive (no screen protector). When I say sensitive I mean as in I get random presses from just about anything from screen condensation, breeze and oil smudges and it gets so annoying especially when you're trying to compose an email and it hits the send button mid way. I've even tried out a hack to reduce the screen sensitivity but it still occurs from time to time. Also coming from a Nexus line I have to say there's barely any activity or new developments in the XZU forums,,something you might want to consider if you're into customizing or flashing roms all the time.
bushako said:
I had the nexus 5 and switched over to the xzu.. I have to say given the opportunity I'd take back my Nexus 5. Don't get me wrong performance wise and price they are both on par. I've installed a ported version of the Google play edition Rom and it works perfectly well. Downside is the size of this device,, it really is massive and I bought it thinking I would get use to it eventually... 2 months on and I'm still having a hard time getting use to holding it. Also I'm not sure if this issue is wide spread but the screen on this thing is super sensitive (no screen protector). When I say sensitive I mean as in I get random presses from just about anything from screen condensation, breeze and oil smudges and it gets so annoying especially when you're trying to compose an email and it hits the send button mid way. I've even tried out a hack to reduce the screen sensitivity but it still occurs from time to time. Also coming from a Nexus line I have to say there's barely any activity or new developments in the XZU forums,,something you might want to consider if you're into customizing or flashing roms all the time.
Click to expand...
Click to collapse
i think i'm sticking with the z ultra afterall.
i've received a very positive review of this smartphone by a friend of mine who owns one, he says this is the best phone he ever had.
Just remove the ASF and apply a tempered glass over for reinforcement. No more ghost touches and you get the best experience.
Also you get the naked Nexus look on front without logo.
Best device I had in years and trust me I had a lot, including Nexus 5.
Sent from my Ultra
bioan said:
Just remove the ASF and apply a tempered glass over for reinforcement. No more ghost touches and you get the best experience.
Also you get the naked Nexus look on front without logo.
Best device I had in years and trust me I had a lot, including Nexus 5.
Sent from my Ultra
Click to expand...
Click to collapse
I'm holding on removing the ASF for now since I have to order the glass screen protector which takes about 4weeks to arrive from hongkong.
bushako said:
I'm holding on removing the ASF for now since I have to order the glass screen protector which takes about 4weeks to arrive from hongkong.
Click to expand...
Click to collapse
Yeah i'm going to keep the ASF until it actually starts giving me problems.
i just have one more question,
is there any difference in the z ultra GPe and the regular Z ultra?
is it only the stock android? if yes, can u get the stock android for the regular version of z ultra?
Hi, to start off sorry if this is not in the right location.
I thought I might get the ball rolling and possibly spark the idea if it's not already an option for use on more than just one phone.
I really hate my Xperia Z2 for one reason. The glass backplate of the phone can shatter easily.
Sure, you can buy a replacement but the quality is garbage in comparison to oem and I've heard Sony will replace it for 200$ USD? forget that.
I've replaced the cover buying from ebay and amazon and after getting my fourth replacement, it cracked just applying it to my phone...
So my question is, how do I get my hands on an aluminum replacement or some sort of metal that will at least stand the test of time?
I'm also thinking of getting in touch with a sheet metal fabricator, as I see no other options out there or just keep using the phone without a backplate and a bulky case. The Z2 is still kicking ass otherwise so I really think it's crazy to replace my phone that's only a few years old and
let it sit there collecting dust cause of a cosmetic issue.
SkyboneNoya said:
Hi, to start off sorry if this is not in the right location.
I thought I might get the ball rolling and possibly spark the idea if it's not already an option for use on more than just one phone.
I really hate my Xperia Z2 for one reason. The glass backplate of the phone can shatter easily.
Sure, you can buy a replacement but the quality is garbage in comparison to oem and I've heard Sony will replace it for 200$ USD? forget that.
I've replaced the cover buying from ebay and amazon and after getting my fourth replacement, it cracked just applying it to my phone...
So my question is, how do I get my hands on an aluminum replacement or some sort of metal that will at least stand the test of time?
I'm also thinking of getting in touch with a sheet metal fabricator, as I see no other options out there or just keep using the phone without a backplate and a bulky case. The Z2 is still kicking ass otherwise so I really think it's crazy to replace my phone that's only a few years old and
let it sit there collecting dust cause of a cosmetic issue.
Click to expand...
Click to collapse
Metal is a bad idea because it'll block the radio signals. Yes, there's plenty of metal-framed phones, but they all have plastic strips or some other means of not blocking signals. If the phone's not deliberately designed that way, it won't work well. For example, when I briefly had a Note 3, I got one of those aluminum/carbon fibre cases, and even though the back was only a skeletonized aluminum, it still dropped my signal by 1 or 2 bars.
Carbon fibre, however, would be a pretty cool choice. I have no idea the thickness of the back glass on the Z2, but you can probably find sheets of the appropriate thickness, even if it's a flexible sheet. It won't exactly be cheap (probably ~$20 for a 6x6" sheet of whatever), but it'd look really cool and definitely stand the test of time.
Planterz said:
Metal is a bad idea because it'll block the radio signals. Yes, there's plenty of metal-framed phones, but they all have plastic strips or some other means of not blocking signals. If the phone's not deliberately designed that way, it won't work well. For example, when I briefly had a Note 3, I got one of those aluminum/carbon fibre cases, and even though the back was only a skeletonized aluminum, it still dropped my signal by 1 or 2 bars.
Carbon fibre, however, would be a pretty cool choice. I have no idea the thickness of the back glass on the Z2, but you can probably find sheets of the appropriate thickness, even if it's a flexible sheet. It won't exactly be cheap (probably ~$20 for a 6x6" sheet of whatever), but it'd look really cool and definitely stand the test of time.
Click to expand...
Click to collapse
Nice, I didn't think about signal blocking. Carbon fiber sounds cool.
Hey guys!
So I received my FlexiCase for the OnePlus 5 today! I can finally move away from my custom case.. (a oneplus 3 case with the camera slot cut out!) I am delighted to see that Orzly are one of the first big-name brands with their cases out! I had the FlexiCase for my OnePlus 3 last year and loved it, so purchased this one the moment I saw it up for pre-order on amazon.
Now lets get into the review!
One of the first things you see in the package when you open it is a letter from the companies co-founder, hoping that you like the product!
http://imgur.com/a/TpGJG
Now onto the packaging, its similar to other products. Dead front you can see through the clear piece of plastic a part of your case, and the rest of the white, orange and gray packaging is surrounding it. The back of it houses some information about Orzly, some social media handles and tells you how you can win some free prizes!
Taking the case out of the packaging, it is a flexible gel case, as the name implies. All the buttons are covered by the case, and the case has protruding areas, along with a gap between the volume up and down buttons to help you determine which is which!
Putting the phone into the case, all the ports, including the camera and alert slider line up perfectly as you can see in the images below! None of the microphones are covered, which is great seeing as I had read of a few companies had covered the one by the camera at the back! Speaker lines up perfectly, and there is ample room for your dash charge cable and headphone jack to fit in, without pushing up the case. The alert slider has a nice little touch, there is a little bit of a space behind it so that your thumb can fit in nicely, without having to struggle! It is actually very useful and you will be able to see it in the images where I compare it with the OnePlus3/3t FlexiCase. Around the back in the bottom right there is a small bit of Orzly branding, which isn't really too obtrusive and is very small.
http://imgur.com/a/wNlwp
There is a lip around the screen, which would be able to protect your device should you drop it and will help to protect you from scratches!
http://imgur.com/a/wEg9a
My opinions? This case is great for anybody who loves the thinness of the OnePlus 5. It sits nearly flush with the back, yet protects the camera. Even though it is thin, it protects the screen which is great! I personally got the clear one, but they do have other matte colours should you want them such as black, red and blue! A link to buy can be found here! (change .co.uk to .com or whatever depending on your location!)
If you have any questions about this case, feel free to ask below and I will reply!
Mine also arrived, pretty standard, good quality and it's nice to be able to see the phone!
I like the oneplus original cases they look that good to me that I spent a extra 100 on Cases. I like every one. They case is OK too though
Mine also arrived today seems pretty good
Rebel7022 said:
I like the oneplus original cases they look that good to me that I spent a extra 100 on Cases. I like every one. They case is OK too though
Click to expand...
Click to collapse
$100 on cases? Wow thats dedication! haha
nadejo said:
Mine also arrived today seems pretty good
Click to expand...
Click to collapse
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
DarkExistence said:
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
Click to expand...
Click to collapse
I think the one from spigen i used on op3 is much better as it is a more hybrid material. Meaning the plastic at the edges is more solid. The edges on the orzly one are too soft so they are moving easily, i dont think it can protect the edges from high impact. Im sure if you dropp it on a edged surface like the edges of some stairs, the edges will bend back and the screen or edges will be f***ed for sure. I will buy a spigen hybrid crytal clear as soon as they pop up on amazon germany.
nadejo said:
I think the one from spigen i used on op3 is much better as it is a more hybrid material. Meaning the plastic at the edges is more solid. The edges on the orzly one are too soft so they are moving easily, i dont think it can protect the edges from high impact. Im sure if you dropp it on a edged surface like the edges of some stairs, the edges will bend back and the screen or edges will be f***ed for sure. I will buy a spigen hybrid crytal clear as soon as they pop up on amazon germany.
Click to expand...
Click to collapse
Ah yeah, this is the flexicase its a bit different. I used the orzly fusion bumper case mainly on my op3 last year, which would be an equivalent to that spigen i believe
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
DarkExistence said:
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
Click to expand...
Click to collapse
I have had the cases since early drop. I can tell you about the Karbon, red & black tpu, the ebony
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason
Click to expand...
Click to collapse
Sooo much this. You'll need to replace this case monthly if you want to keep enjoying it. It'll look like crap soon.
Only way I'll get a clear case is if the back is hard plastic that won't discolor and the edges need to be a solid color TPU.
biglilsteve said:
Sooo much this. You'll need to replace this case monthly if you want to keep enjoying it. It'll look like crap soon.
Only way I'll get a clear case is if the back is hard plastic that won't discolor and the edges need to be a solid color TPU.
Click to expand...
Click to collapse
Have to say the one case thats nearly clear which doesn't discolour (noticeably) is the Tech 21 variants, they have a mesh so it's no completely apparent.
But yea I learned long ago that clear cases are a no no, nicotine brown is not a good look.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others i've seen. hoping this stays the same!
DarkExistence said:
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others i've seen. hoping this stays the same!
Click to expand...
Click to collapse
Aye it does go bad after a while, I had one years ago when i smoked and put two and two together, but it's just grime that it picks up, stick with smokey ones now or black.
Supposed they still get filthy but cant' see it as much.
Worst thing about it is they look amazing when you first get them
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well if your interested it think they also do solid colour version of the case.
A Guy Called Revive said:
Well if your interested it think they also do solid colour version of the case.
Click to expand...
Click to collapse
nice one.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
A Guy Called Revive said:
Well if your interested it think they also do solid colour version of the case.
Click to expand...
Click to collapse
They do but those aren't even shipping yet. When I ordered my black case on Amazon back on June 24th the listing said shipping would start on July 13th. I've already dropped my slippery OP5 once and have a small dent to show for it. I hope the case arrives while I still have something to protect with it.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Same here. I loved the concept of a clear case to show off a nice phone. First time using a clear case was the one that came with my OPx. Didn't take long for it to start turning that nicotine brownish yellow color. (my bad smoking habit didn't help much of course) Got a black spigen case after that and haven't looked back.
I'm waiting for spigen to come out with one for the OP5 and hopefully they do so quickly. I nearly had a heart attack when I dropped it onto the concrete while exiting my work van. (chevy 3500 so It fell from a pretty good distance) Landed screen first but luckily the gorilla glass 5 held up. Ive also got one of the official OP wooden cases which has so far saved the metal finish from some minor scrapes and dings here and there.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yep I never buy perfectly clear cases anymore, they always go off colour and look dirty. I've gone with the Otterbox for my OP5 this time around, that might change if I start feeling it's too bulky. BUT I love the knowledge and reassurance of the protection it offers over other slim/flexi cases.
DarkExistence said:
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others I've seen. hoping this stays the same!
Click to expand...
Click to collapse
Yeah, transparent plastic anything can vary quite alot I find. Some transparent stuff I've had discolors really easy, others last absolutely years without losing a single thing and still cooking crystal clear. (others, varying degrees in between). Have you got any pics of your 3T FlexiCase to show me how they hold up over the test of time? If it's not that bad, then I do like the idea of having transparent cases, because the phone itself seems pretty nice, so is nice to be able to see it through the case, especially stiff like the logo, etc.. But if it's bad, then would probably just go for a colored version instead.
Looks like even the colored ones are finally available now (even just yesterday, all but the transparent one were all showing on pre-order, so looks like t's a safe bet deliverywise for any of the colors either way now)
www.amazon.co.uk/dp/B072QX9H9G but I would still be keen to get your opinion on this, as transparent would have been my first choice, however it's a very good point that alot of people have raised, so I want to be extra specially careful to hear from real people who have used them before knowing which color to get. Main thing is I want it to look nice!
Thanks.