I'm not the Author, the author is wzsx150 from LR.TEAM
Download
TWRP 3.2.2-0711 GoogleDrive
TWRP-3.2.2-0703: GoogleDrive
TWRP-3.2.1-0611: source
How to set language to English
Changelog
2018.7.11 update:
1. Update attempt to repair decrypted data scheme, set lock screen password for machine friends, enter twrp need to enter lock screen password, otherwise it can not Temporarily decrypt data.
2. After brushing in twrp, the first time you enter twrp, it may restart once. This is normal. If you restart repeatedly, or you cannot decrypt the data, please give me feedback in time.
2018.7.3 update:
1. Upgrade to 3.2.2 source code
2. Support new version of MIUI 10 system, fix decryption data problem, set lock screen password Machine friends, you need to enter the lock screen password when entering twrp, otherwise you cannot temporarily decrypt the data.
2018.6.11 update:
1. The interface display is adjusted to no bangs mode.
Important notes:
1. This rec supports data partition auto-decryption . The encrypted data can be used normally under rec without formatting. The official system defaults to encrypting data partitions using a lock screen password .
2. This rec support to brush into the official original full card brush package.
3. The bootloader must be unlocked to be able to brush into a third-party rec.
4. Built-in root system / remove root function, through the root system, you can also remove dm check, prevent card screen, and can make the system root privileges.
5. Set the screen password to the machine friend, enter twrp need to enter the lock screen password, otherwise you can not temporarily decrypt the data.
The root system is strongly recommended, otherwise twrp may be overwritten by the official rec.
Bonus:
Stock firmware MIUI 9 | Android 8.1
GLOBAL
9.5.13.0 OEAMIFA: Recovery / GoogleDrive / Yandex
China
9.5.11.0 OEACNFA: Recovery | Fastboot
9.5.10.0 OEACNFA: Recovery - withdrawn
9.5.8.0 OEACNFA : Recovery
9.5.6.0 OEACNFA : Recovery | Fastboot - withdrawn
Localized firmware MIUI 10 | Android 8.1 | multilingual
MIUI 10 BETA
Xiaomi EU:
8.7.19: SF | AFH | Google.Drive |
8.7.12 v2: SF | AFH | Yandex | Changelog
8.7.12: SF | AFH | Yandex
8.7.6: SF | AFH | Yandex
8.6.28: SF | AFH | dedyk |
8.6.23 TWRP
8.6.18 TWRP
Stock firmware
Hey @dogsly.
This stock firmware, is the chinese version of it, right?
Not a global beta?
In the recovery, I have TWRP 3.2.1
Can I simply flash it with TWRP on the img options??
Edit: flashed already
Thanks a lot
bcuraman said:
Hey @dogsly.
This stock firmware, is the chinese version of it, right?
Not a global beta?
In the recovery, I have TWRP 3.2.1
Can I simply flash it with TWRP on the img options??
Edit: flashed already
Thanks a lot
Click to expand...
Click to collapse
Yes, this is a stock Chinese firmware. There are Chinese and English, there are no Google services. It will be updated by OTA. No global beta. Chinese firmware have a CN in the name, but global MI. For example "OEACNFA" - Chinese firmware, "OEAMIFA" - global.
You're welcome
thanks a lot..... bruhhh
Thank you very much for sharing.
Localized firmware MIUI 10 | Android 8.1 | multilingual
MIUI 10 BETA
Xiaomi EU:
8.7.6: SF | AFH | Я.Диск
8.6.28: SF | AFH | dedyk |
8.6.23 TWRP
8.6.18 TWRP
Thanks, which rom are you finding fast and stable, Chinese or EU?
ermacwins said:
Thanks, which rom are you finding fast and stable, Chinese or EU?
Click to expand...
Click to collapse
Our users use both Chinese firmware and European beta. Both firmware are quite stable. But you need to remember that for the EU firmware you need to unlock the bootloader. This firmware is in beta status and some problems in use are possible. For example, prior to version 8.7.6, the infrared face detection sensor did not work.
If stability is important to you, use the Chinese firmware. If you are ready to experiment and agree to constant updates and corrections for the sake of new experiences - use the firmware EU
Xiaomi EU:
8.7.12 v2: SF | AFH | Yandex | Changelog
8.7.12: SF | AFH | Yandex
hi! I'm a newbie, and I have a few questions:
what's the diference between the recovery and fastboot method?
why is the fastboot firmware much larger?is it safer？
about the twrp, does it support mtp?
And the question bothering me most : some people says you have to wipe data before / after install custom rom
some says you have to wipe before AND after
some says there's no need to wipe at all!
What's the trick？
There‘s lots of us which is confused, and I wish to hear the answer from a pro
Thank you anyway for providing these links!
No expert, but this is what I know. If I wrong, please somebody correct me ASAP.
Q. what's the diference between the recovery and fastboot method?
Fastboot method. You need to connect phone to computer. The phone has to be in a "fastboot" mode. (for mi8se, reboot while press volume_down) and connect via cable to computer. You need to have fastboot program to send command to your phone. Research ADB program in google search.
Recovery method. This is a program reside in your phone just like Fastboot. To enter Recovery, reboot while pressing volume_up. You command your phone through the menu in the Recovery program in your phone. Mi 8 come with its own Recovery program which can't install custom rom. To install custom rom, you need to install TWRP replacing the original Recovery program that come with the phone. Then use TWRP to install customer rom. (many reboots) Research TWRP.
Q. why is the fastboot firmware much larger?is it safer
Not sure. I think you compare between .img and .zip. .img is always bigger than .zip with similar data. You can always fall back to Fastboot if all thing fail. (I think)
Q. about the twrp, does it support mtp?
Yes it does for MI8se with recovery-TWRP-3.2.1-0629-XIAOMI8SE-CN-wzsx150
Q. some people says you have to wipe data before / after install custom rom
Yes if you want to reinstall everything.
You only need to wipe data if you come from different rom.
Suggestion.
I just finished installing TWRP and MIUI 10 beta. If you want to install MIUI 10, I suggest you to change all changeable partition to f2fs or exfat and then change back again to ext4. I think MIUI can't mount partition properly. So have to destroy and create partitions again. Anybody has similar experience?
Why I'm freezing in the Mi Loading interface after reboot? Any suggestions? I've fully wiped everything.
bao007fei said:
Why I'm freezing in the Mi Loading interface after reboot? Any suggestions? I've fully wiped everything.
Click to expand...
Click to collapse
Are you sure? Format data?
Skickat från min MI 8 via Tapatalk
good evening everyone.
finally I spent 360 long hours waiting, today I can install the global version and finally unlock the bootloader, before starting I wanted to know which build multilanguage more stable and if possible give me the link to download
superior8888 said:
Are you sure? Format data?
Skickat från min MI 8 via Tapatalk
Click to expand...
Click to collapse
Thank you for reply.
I am sure. Are you ok with the rom？Which version of twrp and rom do you use？
bao007fei said:
Thank you for reply.
I am sure. Are you ok with the rom？Which version of twrp and rom do you use？
Click to expand...
Click to collapse
Im using twrp from here and xiaomi.eu rom. It works flawless.. tell me your Steps of flashing everything..
Skickat från min MI 8 via Tapatalk
superior8888 said:
Im using twrp from here and xiaomi.eu rom. It works flawless.. tell me your Steps of flashing everything..
Skickat från min MI 8 via Tapatalk
Click to expand...
Click to collapse
I've tried this twrp. Same result. I'm using the chinese version Mi 8 by the way.
Step 1
Wipe date and cache.
Step 2
Flash the zip from xiaomi.eu. (xiaomi.eu_multi_MI8_8.7.12_v10-8.1.zip)
Step 3
After installation, wipe cache/dalvik and reboot. (Then stay at Mi loading interface and won't pass)
What did I miss?
bao007fei said:
I've tried this twrp. Same result. I'm using the chinese version Mi 8 by the way.
Step 1
Wipe date and cache.
Step 2
Flash the zip from xiaomi.eu. (xiaomi.eu_multi_MI8_8.7.12_v10-8.1.zip)
Step 3
After installation, wipe cache/dalvik and reboot. (Then stay at Mi loading interface and won't pass)
What did I miss?
Click to expand...
Click to collapse
You actually have to format data...
Skickat från min MI 8 via Tapatalk
superior8888 said:
You actually have to format data...
Skickat från min MI 8 via Tapatalk
Click to expand...
Click to collapse
It worked!!!
I've always thought wipe data equal to format data...How stupid I am
Thanks for your help and patient. Really appreciate.
Related
Anyone has TWRP for Redmi 6A?
redmi 6a twrp by jemmini
redmi 6a
twrp by jemmini from 4pda_ru mtp not working -use sd card.
1 format data & system, clear cashe and flash new firmware and magisk 15.3 , reboot to system and install magisk apk.
SEARCH IN GOOGLE 4pda(D0T)ru +ATVATOR +JEMMINI+TWRP WIHT LINK TO RGHO_ST IN MY POST
link (rgho(d0t)st /8mNZqm4BT) restore link & copy to browser
root and install twrp:
https://romprovider.com/2018/07/redmi-6a-root-twrp/
<Moderator Edit>: One link deleted due to Rule 13.
Global Rom Stable :
- Recovery : http://bigota.d.miui.com/V9.6.2.0.OCBMIFD/miui_CACTUSGlobal_V9.6.2.0.OCBMIFD_a9380c9697_8.1.zip
# Tested : Perfect
empty.cad said:
<Moderator Edit>: One link deleted due to Rule 13.
Global Rom Stable :
- Recovery : http://bigota.d.miui.com/V9.6.2.0.OCBMIFD/miui_CACTUSGlobal_V9.6.2.0.OCBMIFD_a9380c9697_8.1.zip
# Tested : Perfect
Click to expand...
Click to collapse
No it doesn't. Twrp leads to data partition being encrypted. Whenever WIPE data partition to decrypt, all files are deleted. When reboot into fresh system, copy files again, and reboot into reflashed twrp, data partition is enrolled encrypted again. And no MTP so it's an endless loop.
Anyone has successfully installed TWRP with this method?
Trimis de pe al meu VTR-L09 folosind Tapatalk
Did anyone tried this method: https://www.youtube.com/watch?v=RyVsGZPeZpQ
and here is another video someone uploaded yesterday: https://www.youtube.com/watch?v=tUc3jOIn7WY
About Redmi 6a TWRP
atvator said:
redmi 6a
twrp by jemmini from 4pda_ru mtp not working -use sd card.
1 format data & system, clear cashe and flash new firmware and magisk 15.3 , reboot to system and install magisk apk.
SEARCH IN GOOGLE 4pda(D0T)ru +ATVATOR +JEMMINI+TWRP WIHT LINK TO RGHO_ST IN MY POST
link (rgho(d0t)st /8mNZqm4BT) restore link & copy to browser
Click to expand...
Click to collapse
bro i did you boot into twrp recovery after installation ??
can you elaborate ?
Grahaman27 said:
root and install twrp:
https://romprovider.com/2018/07/redmi-6a-root-twrp/
Click to expand...
Click to collapse
successfully flashed but it goes back to normal regular reboot
what i tried:
1. "fastboot boot recovery.img" after applying this phone goes back to normal reboot
2. "adb reboot recovery.img" after applying this phone goes back to normal reboot
3. "adb reboot recovery" after applying this phone goes back to Mi Recovery 3.0
4. go to recovery mode from software update menu, phone goes back to Mi Recovery 3.0
Base ROM i tried on Miui10 Global, Miui10 chinese, Miui9.6 Global
Help me guys
Zidni
google - fastboot devices -read manual & use it.
check drivers for phone.
Compare file name in comand and in folder. copy all files to one folder. start cmd as administrator.
Grahaman27 said:
root and install twrp:
https://romprovider.com/2018/07/redmi-6a-root-twrp/
Click to expand...
Click to collapse
everything is ok but due to anti 4 it may be goes to stock recovery, So fist time boot in recovery then go to install tab Chose image and then Re select twrp.img and flash. then it works.
twrp.me/xiaomi/xiaomiredmi6a.html
Good news
Official TWRP is here
I can't give the link because of the 10 post limit
Just google it
BTW I haven't tested it yet...
Archelot said:
Anyone has TWRP for Redmi 6A?
Click to expand...
Click to collapse
[LR.Team] TWRP-3.2.3-1020 Redmi 6A
https://4pda.ru/forum/index.php?showtopic=912972&view=findpost&p=79262118
The first business RECOVERY FOR our phone!
I confirm, everything is working!
the main thing
SEES INTERNAL MEMORY
ENCRYPTION NO !!!
It is possible to make a full
Backup system with
Date (user settings, programs, etc.) section.
---------------------------------------
it remains only to sew languages into it, and then only China & English
English is basically enough for slightly advanced users!
@lviv can u post a mirror link?
a4abbas said:
Did anyone tried this method:
and here is another video someone uploaded yesterday:
Click to expand...
Click to collapse
I have tried method 2, it root success, but still can't install xposed framework
r3v3nant33 said:
@lviv can u post a mirror link?
Click to expand...
Click to collapse
OK! MEGA-
https://mega.nz/#!XCh2nKpB!HX4m_9WVDy6-W3BbUUTUa0NY6JlPqSSftqbq8koXtqE
Key
HX4m_9WVDy6-W3BbUUTUa0NY6JlPqSSftqbq8koXtqE
I installed this TWRP on Redmi 6A and i have bootloop on Mi logo and three dots are going on the newest xiaomi.eu ROM, any1 have the same issue?
gwozdziu114 said:
I installed this TWRP on Redmi 6A and i have bootloop on Mi logo and three dots are going on the newest xiaomi.eu ROM, any1 have the same issue?
Click to expand...
Click to collapse
Xiaomi.eu firmware does not work on Xioami Redmi 6A
smotaras said:
Xiaomi.eu firmware does not work on Xioami Redmi 6A
Click to expand...
Click to collapse
When i wrote xiaomi.eu i thought about MIUI Polska from this link, there is available 6A download link.
https://miuipolska.pl/download/
gwozdziu114 said:
When i wrote xiaomi.eu i thought about MIUI Polska from this link, there is available 6A download link.
https://miuipolska.pl/download/
Click to expand...
Click to collapse
Zadne oprogramowanie xioami.eu nie pracuje na naszym uzondzeniu!
Jeśli chcesz MiuiPro v.8.10.11 to mozesz pobrac tutaj
https://mega.nz/#!GORkwS5D!4u3hpk92m1-ULc_lfH_seYIYvzVbPPWXLBT4M5XbpYw
KEY
4u3hpk92m1-ULc_lfH_seYIYvzVbPPWXLBT4M5XbpYw
100% pracuje,
Polski jenzyk jest dostempny
Wuzej jest nowe TWRP 3.2.3
TWRP-3.2.3-1020-OMFG-mod_b6
Onowilem link na MEGA
Redmi K20 Pro
[Raphael]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are NOT risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Drivers
Mi Flash
Minimal ADB and Fastboot
Unlock Bootloader
Unlock Bootloader
Unlock here
*AMD Ryzen System has a issues in Unlocking Bootloader try another PC (Intel System)
TWRP Recovery
TWRP
TWRP auto install
Unofficial TWRP 3.3.1 Recovery - RU and Eng
Unofficial TWRP 3.3.1 Recovery @nikk3d - Multilingual
Unofficial Pitch Black Recovery @nikk3d
OrangeFox Recovery Official R10
TWRP Recovery for Android Q
/ Installation
Root
Magisk Stable
Magisk Manager
Firmwares
China MIUI 11
9.9.9
9.9.6-9.9.9
9.10.8
11.0.2.0
11.0.3.0
11.0.1.0.
11.0.4.0
11.0.5.0
9.12.27
Global Stable
10.3.3.0 Fastboot
10.3.3.0 Recovery
Global Beta
China
V10.3.6.0.PFKCNXM Fastboot
V10.3.7.0.PFKCNXM Recovery
V10.3.7.0PFKCNXM Fastboot
V10.3.8.0.PFKCNXM Recovery
V10.3.8.0PFKCNXM Fastboot
V10.3.9.0PFKCNXM Recovery
V10.3.10.0PFKCNXM Recovery
V10.3.110.PFKCNXM Recovery
V10.3.12.0PFKCNXM Recovery
V10.3.14.0PFKCNXM Recovery
V10.3.16.0PFKCNXM Recovery
V10.4.4.0 RecoveryQFKCNXM
V10.4.4.6 RecoveryQFKCNXM
OTA
10.3.10.0 to 10.3.11.0
10.3.8.0 to 10.3.10.0
10.3.7.0 to 10.3.8.0
10.3.9.0 to 10.3.10.0
Beta
9.6.11
9.6.20
9.7.4
9.8.12
9.8.21
9.9.3
India
Stable Firmwares
10.3.3.0 Fastboot
10.3.5.0
10.4.7.0 Android Q
10.4.8.0 Android Q
Beta
Global
EU
9.6.13
9.6.20
10.3.9.0
10.3.10.0
10.3.11.0
9.6.27
[URL="https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv10/xiaomi.eu_multi_HMK20ProMI9TPro_V10.3.12.0.PFKCNXM_v10-9.zip/download"]10.3.12.0[/URL]
9.7.4
10.3.14.0
10.3.15.0
9.7.11
9.7.18
9.7.19
10.3.16
9.7.27
9.8.1
EU Android Q 9.8.8
9.8.12
9.8.15
9.8.22
10.3.17
EU Android Q 9.8.29
EU Android Q 10.4.4.0
9.9.3
9.9.6
10.3.30
EU Android Q 10.4.6.0
MIUI 11 9.9.26
MIUI 11 9.10.10
MIUI 11 11.0.2.0
MIUI 11 9.10.24
MIUI 11 9.11.7
MIUI 11 9.11.14
MIUI 11 9.11.21
MIUI 11 9.11.22
MIUI 11 9.11.28
MIUI 11 9.12.5
MIUI 11 9.12.12
MIUI 11 9.12.27
MIUI 11 20.1.16
Global EEA
10.3.1.0 PFKEUXM Fastboot
10.3.1.0 PFKEUXM Recovery
10.3.3.0 Recovery
Mi-Room
9.6.20
9.6.27
9.7.4
9.8.1
9.8.22 Android Q
9.8.29 Android Q
9.9.6 Android Q
MiuiMix
10.3.17.0
Mi-Italia
10.3.16.0
MIUI MS
9.7.18.9
9.7.25.9
9.8.1
Android Q 9.8.8
*Back up everything and Flash via TWRP Recovery
*For Raphael only (China ROM)
9.8.8 Q
9.8.8-9.8.29 Q
9.8.29 Q
MIUI 11 9.9.24
MIUI 11 9.9.25
[URL="https://hugeota.d.miui.com/9.9.26/miui_RAPHAEL_9.9.26_c74ffeeec0_10.0.zip"]MIUI 11 9.9.26[/URL]
Revolution OS
9.9.7
Google service error flash this
9.9.21 Q
9.9.21 Pie
Android Q [Unlocked Bootloader]
Beta 1
TWRP RESET Password
If you forget the password go to TWRP Recovery and Flash.
Removing Bloatwares in Locked/Unlocked Bootloader
-Enable Developer Options and click USB debugging
1.Open and click run as administrator XiaomiADBfastboottools.exe
2.Click Debloater
3.Check your phone (Allow)
4.Select the system apps that want you to delete
5. Wait for the process....
6.After finished.. click the Reboot into System
The Ultimate Guide for Redmi K20 Pro [Raphael]
Fake Global ROM to Chinese ROM to Global ROM/EU/Mi-Room
ATTENTION!*All that you will do with the phone is guided by this guide - it lies in the area of your personal responsibility only.*Neither I nor other members of the forum, not the administration of the forum are responsible.*
If you do not understand something and the written guide below - contact the LS to knowledgeable colleagues, as I did!*Hide created for the Chinese version of the phone K20 Pro - Global ROM.*(for India it will not work!)*
I will explain in stages what to do, giving my comments in my simple language: what?*What for?*Why?*Don't be scared that there are a lot of points - I tried to chew everything up.
So what do we have?*
• K20 Pro - Global ROM (Installed by the Chinese firmware, with no updates, poor translation, with not working Gpay)*
• You must create an official mi account and link the device to it.*
What do we need?:*
• Installation Recovery - Orange fox (Advanced replacement of standard Recovery, and installation of any firmware) - Wildly necessary thing!*
• Installing the firmware MI Room 9.7.4*
• Proper operation of the GPAY through the patch*
Introduction)*
So, you got a phone from China.*What do you have in your hands?*This is the device on which the Chinese put the left firmware and at the same time did not unlock the bootloader officially - which is not compatible with the transition to any, really good firmware.*
Before we begin - the most important thing!*(further quote from the forum):
ATTENTION!*CHINESE VERSION REDMI K20 PRO CAN BE BLOCKED ONLY ON THE CHINESE FIRMWARE!*Before carrying out any operation, read the materials that are referenced in the header themes, check Search by topic, and if not found the answer to your question, or do not understand something, ask more experienced users.*
Do you understand?*Now read again 20 and memorize this phrase!*
INSTALLATION OF THE CHINESE OFFICIAL FIRMWARE AND LOCKER DOWNLOAD AND UNLOCK!*
What for?*Your phone needs to be unlocked officially.*To do this, you must put the official firmware and file for unlocking officially.*
What is needed (all in the header):*
•Firmware file - *10.3.6.0 China Fastboot
• Program MiFlash 2018.11.15.0 (we need administrator rights) - a program to install Fastboot-type firmware and lock the phone loader.*
• Driver for computer - ADB Driver Lite
• Program - miflash_unlock*
• Phone*
• Type C Cable*
1) Download all of the above and check that everything downloaded*in the right “size”.*
2) Install MiFlash 2018.11.15.0*on the C drive:
3) Go to MiFlash 2018.11.15.0 - it will offer to install the drivers.*Do not hesitate to install everything - exit the program!*
4) Install ADB Driver Lite (by default it is set by MiFlash but will not be worse if you additionally install the latest driver from the header)
5) - CORRECTLY unpacking the firmware 10.3.6.0 China Fastboot!*By default, you download it with the extension .tgz!*The file you downloaded will be called raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tgz*
- Unzip this .tgz file and get a file with the .tar extension.*The full name will be - raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tar.*
- Unzip this .tar file and get a folder named raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn.*Here we will work with this folder in the future!*You need to move it to drive C:!*It is important!*
6) Switch the phone to debug mode via USB.*(I think there will be no problems here)
7) Transfer the phone to FASTBOOT mode.*Turn off the device.*Clamp the power button + volume rocker down.*If there is a hare and the inscription Fastboot then everything is OK!*
8) In MiFlash, press the Select button, specify the path to the folder with the firmware raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn and click ok.*
9) Something like this should appear in the line:*С: \ raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn
10) Put a clean all and lock checkbox at the bottom.*This parameter means that the*
phone will be erased while all data is erased, and the bootloader is locked.*(only for the Chinese version of the phone)*
11) We connect the phone (in fastboot mode) to the computer through the official drawstring.*And without any USB hubs and adapters!*
12) Press the Refresh button.
13) If everything is correct then a line should appear with the id of the phone and the status ready.*
14) So, the phone is recognized.*The path to the folder with the firmware is specified.*Galka clean all and lock costs.*Press the flash button.*
15) The phone starts to sew!*Do not unplug the power cord!*don't touch anything at all.*Do not breathe!*The firmware time is about 10 minutes.*
16) At the end of the firmware, complete will appear in the line with the execution status and the phone will restart (up to 10 minutes) to the initial welcome screen.*Disconnect the phone.*
17) Hooray you flashed to the Chinese firmware and officially blocked the phone.*Let's start the activation and application for unlocking.
18) The first thing that will meet you is the screen in Chinese.*With two button in Chinese.*Push first you are asked to enter something ... This is the password from your mi account.*We enter.*
19) Tap on the second button connect to the Wi-Fi or skip.*
20) Choose the English language.*Customize your phone.*
21) Transfer the phone to the developer mode.*In the settings of the developer, we go into the unlock status (I don’t remember exactly how to speak English).*We see the closed lock, below we see the button.*Click on it!*And we will register the phone for the official unlock (Wi-Fi should be turned off and mobile networks on).*
22) Next, go to the mi account and check that your mobile phone is tied.*Are you convinced?*I recommend to look at the corresponding topic on the forum with the video.
23) On the PC, run miflash_unlock.*Log in to your mi account.*The phone is transferred to the Fastboot mode (point 7) and connected to the computer.*Press the unlock button.*At the same time, we confirm a bunch of times that we are sure that we want to do this.*All your data will be destroyed.*
24) The PC starts to unlock and at some point gives a message that the unlock failed and should be tried again after 168 hours.
25) Congratulations, you activated the counter before unlocking.*You walk with the phone 7 days on the Chinese firmware.*Is it hard?*Well no.*You can take the apk with Google services from the page on this forum and install what you need.*
26) It's been 168 hours, and you're ready to unlock.*
27) But before you do ... Update your phone over the air to the latest version - nowhere on the forum it is not written (I have not seen) but this is important.*I will explain later why!*Remember this item.*
28) Start and repeat paragraph 23. And lo and behold!*The unlock process has begun.*And at the end there is an inscription that the phone is unlocked.
29) Now, when you boot your phone, you should see Unlocked.*Check out what it is!*
30) Configure the phone again.*Turn on USB debugging mode.*
31) Further, in my opinion the most dreary, because the forum has a lot of conflicting information.*I will tell you how I did.*But before continuing, I can say that since you have already received unlock, it is almost impossible to turn the phone around (but everything is possible)*
32) So, download three things:*
- TWRP-3.3.1*
- OrangeFox R10.0 Recovery*
- MI Room 9.7.4 firmware
33) Everything that you downloaded in the zip archives.
34) Unzip -TWRP-3.3.1 to drive C. Transfer the phone to Fastboot (item 7) and connect it to the computer.*We find in the unpacked folder TWRP file with the extension .bat.*in different versions of TWRP called differently.*I called Flash_twrp.bat*
35) And before*proceeding, I’ll*remind you about clause 27).*The fact is that I could not install TWRP without updating over the air.*Therefore, you must first install the update.*And on the firmware 10.3.6.0 China Fastboot.*- It will not work to put TWRP and you will have to do a lot again*
36) Start and get the menu in my Russian language, where we select the auto installation (1).*After a couple of seconds, your phone should reboot into TWRP recovery.*There we choose the language if asked.*
37) And
so, we are in the main menu of TWRP.*We need to take a series of actions*(in a strict order)
38) Go to the Wipe point and select FORMAT DATA -> svayp -> type yes.*The formatting process takes a couple of seconds.*What does this item do in my understanding?*He decrypts the data on the phone, which is necessary to throw on the phone firmware and Orange fox.*
39) Exit the main menu by clicking REBOOT Recovery.*The phone should reboot into the main menu again.*And on the PC, it should be defined as a phone with Internal storage.*Go to the Internal storage on the PC.*See the TWRP folder?*If yes, then everything is OK!*
40) On the phone, go to the Wipe point and select Advanced wipe -> svayp -> select all the items*except System and OTG* svayp
41) Exit the main menu, press REBOOT -> Recovery.*The phone should reboot into the main menu again.*
42) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded OrangeFox R10.0 recovery directly into the zip archive.*
43) On the phone, go to the Install item and see our Orange Fox.*Choose it.*AND THERE IS THE MOST IMPORTANT!*He will ask you to install two checkboxes before installation: one of them Verification of the ZIP signature (in English) and so this checkbox must be removed, otherwise the error will be.*We start the installation.*Your phone must reboot into Orange FOX.*
44) So what is Orange Fox?*This same TWRP is simply much more convenient and stable.*
45) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded firmware to the worlds.
46) In Orange Fox, select this firmware, also remove the checkmark ZIP signature check (in English).*And start the process of installing the firmware.*
47) Hooray you got the best, in my opinion, firmware)*
48) Disconnect from the computer.*Customize your phone.*
49) Installing a patch for Gpay is easy.*Straight from the phone, download the patch file.*
50) Put the phone in orange fox recovery mode.*Turn off the device.*We press the power button + volume rocker UP (not to be confused with the power button + volume rocker DOWN for Fastboot boot mode)*
51) In the Downloads folder we see our patch and install (also remove the Check Signature ZIP checkbox).*
52) Congratulations!
Thanks to
helpbabay911
Mysttorent
Viper4Android + DDPlus and Google Pay Fix for Redmi K20 Pro
Google Pay Fix
•TWRP Recovery from our site
•Do not install the patch simultaneously with other patches or firmware.
•Install the patch only on top of the installed firmware. If you have made a date wipe, first launch the firmware, perform the initial setup, and then install the patch itself.
•Before installing the patch, make sure that the Data section is mounted (usually it is mounted by default on all TWRPs).
Download
*Credits to Mi-Room RU
Viper4android + DDPlus =
1.Install Audio Modification Library (AML) and Audio Compatible Patch (ACP) via Magisk Repo and reboot.
2.Install DDPlus via Magisk and reboot.
3.Install Viper4Android via Magisk and reboot. (materialized).
4.selinux changer (choose permissive if not working in enforcing).
5.Profiles
Profiles with IRS 1
Profiles with IRS 2
Profiles
DDPlus
AML (You can download from Magisk Repo)
ACP (You can download from Magisk Repo)
Viper4android (You can download from Magisk Repo)
Reserved 3
Reserved 4
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Thank you for your amazing work!
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
Yes, you can flash it with TWRP. That's the multilanguage rom with Google Play preinstalled and without the bloatware of the Chinese version.
madsponge26 said:
Reserved 1
Click to expand...
Click to collapse
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
melmarPH said:
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
Click to expand...
Click to collapse
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
madsponge26 said:
Reserved 4
Click to expand...
Click to collapse
Hi, Please update the thread, here's a fastboot link for Firmware 10.3.7.0
https://bigota.d.miui.com/V10.3.7.0...FKCNXM_20190528.0000.00_9.0_cn_8b5bfd6d56.tgz
and 10.3.8.0
http://bigota.d.miui.com/V10.3.8.0....FKCNXM_20190601.0000.00_9.0_cn_beb2b2a432.tgz
Robbo.5000 said:
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
Click to expand...
Click to collapse
That's crystal clear. Thank you so much..
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
I would not suggest to flash it right now as a daily driver, here is a review for xiaomi eu rom.
https://www.youtube.com/watch?v=mTi8nYMJRx4
sorry can i ask 9.6.11 is global beta rom or china rom?
What is the wait time to unlock the bootloader?
bretzelpopo said:
What is the wait time to unlock the bootloader?
Click to expand...
Click to collapse
7 days
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
I was with the same doubt. is that rom really a Beta version of the global rom?
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
rafa_martineiz said:
I was with the same doubt. is that rom really a Beta version of the global rom?
Click to expand...
Click to collapse
9.6.11 is China Beta
9.6.13 is EU version which is from Xiaomi.EU . Unofficial global version based on China ROM that removes all chinese bloat and adds more languages.
New Links!
10.3.6.0 for Recovery
http://bigota.d.miui.com/V10.3.6.0.PFKCNXM/miui_RAPHAEL_V10.3.6.0.PFKCNXM_e679907a50_9.0.zip
10.3.9.0 for Recovery
http://bigota.d.miui.com/V10.3.9.0.PFKCNXM/miui_RAPHAEL_V10.3.9.0.PFKCNXM_bd915c4259_9.0.zip
MIUI 10 10.3.9.0 Android Pie 9.0 is up!
Changelog
MIUI 10 EU 10.3.9.0 Android Pie 9.0 is up!
Changelog
OTA Updates
- 20.6.4, which fixes a few small bugs.
- 20.6.11, with a few more small fixes.
- 20.6.18, with a few more small fixes.
- 20.7.2, with a few more small fixes.
- 20.7.9, with a few more small fixes.
- 20.7.16, with a few more small fixes. Note this version includes the July 2020 Android 10 security patches.
- 20.7.23, with a few more small fixes. From the changelog, this is a minor update.
- 20.7.30, with a few more small fixes. Note this version includes the August 2020 Android 10 security patches.
A few tips for OTA updating after a first xiaomi.eu install:
1. Use the included Updater app.
2. Be patient. The screen will go black for quite a few seconds, just wait. Also, wait a few seconds at the MIUI logo.
3. Note there is no need to wipe or format data or any partition for OTA updates. The Updater app takes care of everything and no data is lost.
I managed to install xiaomi.eu MIUI 12 ROM, latest beta 20.5.28 on my Mi 9T. This is done in three basic steps:
1) Unlock the bootloader. Note that you don't need to wait 168 hours anymore, just use the Mi Unlock app and you can do it in a few minutes (requires a PC). Check the Mi Unlock app for detailed instructions. Link to Mi Unlock tool: https://xiaomitools.com/mi-unlock-tool-en/
2) Install TWRP latest version. Note that there is a trick here because if you reboot into recovery just after installing TWRP, the normal Mi recovery will overwrite TWRP. Instructions to avoid that are found on the TWRP website. Link to TWRP for Mi 9T / Redmi K20: https://dl.twrp.me/davinci/
Instructions to flash TWRP: https://twrp.me/xiaomi/xiaomimi9t.html
3) Flash xiaomi.eu ROM. Again there is a little trick here that you must format data partition with TWRP before flashing the xiaomi.eu ROM. I forgot to do that the first time around and got a TWRP bootloop, solved by recopying the xiaomi.eu img file using adb push and then reflashing the xiaomi.eu image. Again here the correct instructions are found in the xiaomi.eu website.
Link to xiaomi.eu MIUI 12 beta roms and installation instructions: https://xiaomi.eu/community/threads/20-5-28.56038/
4) Definitely enjoying Dark Mode on MIUI 12! Try it!
AndrewADB said:
I managed to install xiaomi.eu MIUI 12 ROM, latest beta 20.5.28 on my Mi 9T. This is done in three basic steps:
1) Unlock the bootloader. Note that you don't need to wait 168 hours anymore, just use the Mi Unlock app and you can do it in a few minutes (requires a PC). Check the Mi Unlock app for detailed instructions.
2) Install TWRP latest version. Note that there is a trick here because if you reboot into recovery just after installing TWRP, the normal Mi recovery will overwrite TWRP. Instructions to avoid that are found on the TWRP website.
3) Flash xiaomi.eu ROM. Again there is a little trick here that you must format data partition with TWRP before flashing the xiaomi.eu ROM. I forgot to do that the first time around and got a TWRP bootloop, solved by recopying the xiaomi.eu img file using adb push and then reflashing the xiaomi.eu image. Again here the correct instructions are found in the xiaomi.eu website.
Click to expand...
Click to collapse
Too bad you just posted this guide. Yesterday I spent all night trying to laugh. Only today was I able to install the Rom. It's sensational. Congratulations on the post, it's well explained, just missing the details of the tricks rsrsrsrsrs
wintermedeiros said:
Too bad you just posted this guide. Yesterday I spent all night trying to laugh. Only today was I able to install the Rom. It's sensational. Congratulations on the post, it's well explained, just missing the details of the tricks rsrsrsrsrs
Click to expand...
Click to collapse
I added some links to help people interested find the correct method for installation.
I encountered battery drain problem overnight with this update
ayazuddinkhan said:
I encountered battery drain problem overnight with this update
Click to expand...
Click to collapse
I have configured AOD and yet I only lose around 5% charge overnight. So not a problem in my case.
TWRP bootloop
3) Flash xiaomi.eu ROM. Again there is a little trick here that you must format data partition with TWRP before flashing the xiaomi.eu ROM. I forgot to do that the first time around and got a TWRP bootloop, solved by recopying the xiaomi.eu img file using adb push and then reflashing the xiaomi.eu image. Again here the correct instructions are found in the xiaomi.eu website.
Hi, I come from global 11 stable and I try to flash mui 12 but go on TWRP bootloop even I format data before flash rom, can share link or xiaomi.eu img file to try to resolve?
TWRP bootloop solution
MattiaRomano said:
Hi, I come from global 11 stable and I try to flash mui 12 but go on TWRP bootloop even I format data before flash rom, can share link or xiaomi.eu img file to try to resolve?
Click to expand...
Click to collapse
1) Boot into TWRP.
2) Connect phone to PC and make sure you have drivers installed as well as adb tool.
3) Download latest xiaomi.eu davinci MIUI 12 beta ROM image to your PC.
4) Using TWRP, format data partition.
5) Use adb push command on PC to copy ROM image file to your Mi 9T.
6) Using TWRP, flash image file and reboot.
Hi,
My sensors don't work and the Phone app crash on incoming calls, it's me or someone else has this issue?
Any solution for this let me know, thanks !
ierv69 said:
Hi,
My sensors don't work and the Phone app crash on incoming calls, it's me or someone else has this issue?
Any solution for this let me know, thanks !
Click to expand...
Click to collapse
xiaomi.eu has a forum specifically for bugs. I think it's just you. Solution: reflash stable MIUI 11 ROM, reset to factory settings, test sensors and incoming calls, and retry with another MIUI 12 ROM.
AndrewADB said:
xiaomi.eu has a forum specifically for bugs. I think it's just you. Solution: reflash stable MIUI 11 ROM, reset to factory settings, test sensors and incoming calls, and retry with another MIUI 12 ROM.
Click to expand...
Click to collapse
Thanks !!!!
Hi everyone
any of you have ghost touch problems with version 20.5.28?
oiram58 said:
Hi everyone
any of you have ghost touch problems with version 20.5.28?
Click to expand...
Click to collapse
Not at all.
AndrewADB said:
Not at all.
Click to expand...
Click to collapse
Thanks for the reply
for now I am back on version 20.5.21 and everything seems to be working well
I will wait for the next update which I believe will arrive today
oiram58 said:
Thanks for the reply
for now I am back on version 20.5.21 and everything seems to be working well
I will wait for the next update which I believe will arrive today
Click to expand...
Click to collapse
Just OTA updated to 20.6.4, it fixes a few small issues and for me, it's working fine as far as I can tell. :good:
On Titanium atm, and wondering whether I should try latest xiaomi.eu but had a few questions:
- How do you install v4a on Miui 12? Is it as easy as audio compatability patch, install driver, reboot?
- Can you just replace the stock gallery app with google photos? Will this open from Camera?
- Does xiaomi.eu come with vendor if I flash it? Currently have OSS vendor.
- Is it less laggy than the first beta release on davinci?
- How do you get the Global theme gallery?
- Can I flash, THEN wipe data before reboot?
- Is OTA supported with Orangefox?
Thanks for any answers.
AndrewADB said:
Just OTA updated to 20.6.4, it fixes a few small issues and for me, it's working fine as far as I can tell. :good:
Click to expand...
Click to collapse
which recovery do you use?
All I care is the lag situation. How's the lag thing? Last time I used miui12 beta the system launcher was laggy as hell
oiram58 said:
which recovery do you use?
Click to expand...
Click to collapse
TWRP. It's the one xiaomi.eu recommend, it works fine and has never, ever, failed me.
Criticalstriker said:
All I care is the lag situation. How's the lag thing? Last time I used miui12 beta the system launcher was laggy as hell
Click to expand...
Click to collapse
Zero lag on my Mi 9T with xiaomi.eu MIUI 12 20.6.4 Beta ROM. Everything launches instantly.
No I mean animation lag/stutter
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
as soon as the .eu comes out I install
Enviado desde mi Mi 9T mediante Tapatalk
Micdu70 said:
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
Click to expand...
Click to collapse
Thanks for rectification ?
HumptyPotato47 said:
If i install china beta, i will get ota updates weekly ? Updates will work normally ?
Click to expand...
Click to collapse
Not certain about this but i think they support ota, maybe wait for xiaomi.eu if you really need ota?
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
Official TWRP 3.4.0.0 or something else?
so, this means this phone will be get miui 13 and android 11 officially, right?
GabiML said:
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
Click to expand...
Click to collapse
yy i try it with 10.0.2 and i boot up without any problem, but when you need flash back a10 rom you must wipe data / system before...
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
HumptyPotato47 said:
Just download the latest official version which is 3.4.0.0
Click to expand...
Click to collapse
do i just flash the recovery because i had mauronofrio and orangefox right now
Soft Bricked
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
mzan said:
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
Click to expand...
Click to collapse
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
sidodz said:
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
Click to expand...
Click to collapse
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
mzan said:
TWRP - Latest = Yes
6) advance wipe - dalvik cache/system/data/cache
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think you should've formatted data, then after a reboot wipe.
HumptyPotato47 said:
xiaomi.eu version finally released.
https://sourceforge.net/projects/xi...iles/xiaomi.eu/MIUI-WEEKLY-RELEASES/20.10.22/
Click to expand...
Click to collapse
do you know if i need to clean install this weekly?
I just did the clean install.
so far everything ok!
mzan said:
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think unlike previous iterations, we don't wipe system partition with these Roms as long as the vendor is same. (Means, If within MIUI Roms, no need. likewise with others such as AOSP)
strokesbr said:
I just did the clean install.
so far everything ok!
Click to expand...
Click to collapse
please mention the steps as for a rookie. pls
Thank You,
mzan said:
please mention the steps as for a rookie. pls
Thank You,
Click to expand...
Click to collapse
If your boot-loader is unlocked and have twrp, just FORMAT DATA, cache & Dalvik and flash the A11 Weekly Rom. Clean installation means formatting DATA partition and setting up as new.
I'm on weekly 20.09.17 and will be flashing the latest A11 weekly end of the day after work.
Edit: When you format DATA, your internal storage too would be wiped. So Make sure you have a PC (To mount twrp and copy the file) or OTG to push the Rom file to internal storage after formatting data.
manosath said:
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
Click to expand...
Click to collapse
https://t.me/randomdavinci/33877
Disclaimer:
The use and installation of this software product is at the exclusive responsibility of the user.I am not responsible for any damage that may occur to your device resulting from the use of this software.This software product is "as is". Its first goal is to allow the xiaomi.eu Rom be installed via recovery.If you have any doubts regarding the above lines, you should not use or install it.
Recovery:
Unofficial release 3.7.0 for Xiaomi Mi 10T Lite and Redmi Note 9 Pro 5G devices. Status : StableVersion : 3.7.0.4GRelease Date : 2022.12.26Features:
Android 12 decryptionAndroid 13 decryption (Not tested by myself)FlashingAdbOtg (Not tested by myself)MtpBackup / Restore to / from microSDBackup / Restore through adbSideloadDevice boot Logo changerMagisk tools and theme from @ Brigudav (Not tested by myself)
Notes:
I concluded that custom roms (without Miui) are unable to decrypt /data with this recovery.Checking LineageOS and ArrowOS, it seems that they use a different encryption mode than Miui.I haven't found how to check on Twrp booting what encryption mode /data uses and adjust to it.Therefore, I have uploaded another release for non Miui devices.Can't tested by myself, I don't know if it decrypts fine.However, it is likely the Miui variant will work correctly on the rest.
About official TWRP: The current official release https://twrp.me/xiaomi/xiaomimi10i.html does not work anymore since Miui 13. Use instead this TWRP.
Twrp not decryping on miui 14: Please, read this post
Downloads:
Last release from Xda (Post #2)
Older releases from androidfilehost
Release 3.7.0.3F for CUSTOM NOT Miui rom from Xda (Post #2)
Installation:
Updating this Twrp release:Downloaded to phone:Click on Install and locate the .zip file.Downloaded to PC (no need to copy it to the phone): On phone: start install via ADB (sideload). On PC execute: adb sideload file_name.zip
Try without installing: (does not alter the phone unless you want to do)Extract recovery.img from .zip file downloadedEnter fastboot mode.Execute: fastboot boot recovery.img
Installing this for the first time:
Your bootloader must be open. Extract recovery.img from downloaded .zip file. Enter fastboot mode Execute: fastboot flash recovery recovery.imgCredits:
Team Win RecoveryMinimal Manifest PlatformAlexander Brigudav
Latest release 3.7.0.4G for MIUI rom
Release 3.7.0.3F for CUSTOM Non Miui rom
Nice work
Flashed R2 release, but it doesn't decrypt my data (it doesn't ask about my PIN). I am Polish xiaomi.eu translator and tester, and will ask Xiaomi.eu team about recovery ROM if the storage is decrypted... but can't for now...
Also, I was unable to boot to system after flash that TWRP, I had to use OrangeFox to be able to boot.
kacskrz said:
Flashed R2 release, but it doesn't decrypt my data (it doesn't ask about my PIN). I am Polish xiaomi.eu translator and tester, and will ask Xiaomi.eu team about recovery ROM if the storage is decrypted... but can't for now...
Also, I was unable to boot to system after flash that TWRP, I had to use OrangeFox to be able to boot.
Click to expand...
Click to collapse
Hello. I'm Spanish xiaomi.eu translator and user.
I don't understand how is possible your issue...
When I boot TWRP it asks me for the PIN to decrypt.
I would not have uploaded the image without testing it first.
Also the reboot buttons do what they say..
I have so far tested it without installing, because I have not yet dumped the Stock Recovery partition.
In theory, it is supposed to work exactly the same in boot mode as in flash mode.
Can you try it without installing?
As stated in the third disclaimer lines:
"Its intention is to allow the Rom xiaomi.eu be installed via recovery."
I retired here due to lack of free time and have only become involved now for this reason.
Best regards
tuxafgmur said:
Can you try it without installing?
Click to expand...
Click to collapse
Same situation, unfortunately... (except the reboot button which boots system, as i've just booted recovery, not flashed).
Edit: removed all screen lock methods I've set, still same. Looks like it isn't able to decrypt my data even without screen lock... Maybe something works differently between beta (which I use) and stable (which you use) release?
Edit2: logs there with set PIN as screen lock method https://miuipolska.pl/d/Orjon/gauguin_twrp.zip
Edit 3 24.07. 9:00am CEST: reboot to system works fine now after flashing your recovery, maybe the fact i've used "fastboot reboot-recovery" command was the reason to fail before...
kacskrz said:
Same situation, unfortunately... (except the reboot button which boots system, as i've just booted recovery, not flashed).
Edit: removed all screen lock methods I've set, still same. Looks like it isn't able to decrypt my data even without screen lock... Maybe something works differently between beta (which I use) and stable (which you use) release?
Edit2: logs there with set PIN as screen lock method https://miuipolska.pl/d/Orjon/gauguin_twrp.zip
Click to expand...
Click to collapse
Your logs do not seem to give relevant information about the issue.
It is clear that booting are completely ignoring the security lockout..
During the night I dumped and unpacked the stock recovery.
After studying it, I found nothing significant except that the kernel is not exactly the same as in boot.img.
I'm now downloading the latest weekly release to unpack it and compare vs stable release.
kacskrz said:
Edit 3 24.07. 9:00am CEST: reboot to system works fine now after flashing your recovery, maybe the fact i've used "fastboot reboot-recovery" command was the reason to fail before...
Click to expand...
Click to collapse
I'm not sure I understand what this paragraph means..
Regards.
Pixel Experience 12 data decrypted successfully.
Thanks
Lineage os data decrypted successfully.
Unfortunately, the weekly xiaomi.eu does not decipher the date.
For @kacskrz , @nolan2112 and anyone else using weekly xiaomi.eu:
I would appreciate the test of the new Release 3 I just uploaded.
Thanks in advance.
@tuxafgmur Unfortunately, nothing changed. I've posted logs on the xiaomi.eu thread.
The latest version also cannot decode the date. firmware weekly 22.7.21
New release 3.6.2.1B uploaded
In addition to some other minor changes,
fixed decryption on xiaomi.eu weekly.
New release 3.6.2.1B-R2 uploaded
No relevant changes.
Tested to flash xiaomi.eu from storage and sideload.
tuxafgmur said:
New release 3.6.2.1B-R2 uploaded
No relevant changes.
Click to expand...
Click to collapse
Everything is fine, the recovery is fully working. Thanks Amigo!
New release 3.6.2.1B-R3 uploaded
Revision
New release 3.6.2.1C uploaded
Format: Zip file to install from TWRP.
Some reviews.
Since xiaomi.eu rom replaces boot Logo on global devices, showing "Redmi"
this release includes options to switch logo between "MI" and "Redmi".
Each has two versions to choose from:
1 - Factory stock.2 - Like stock but hiding the padlock shown when bootloader is open.
The only recovery that works (and decrypts) on the newest MIUI 13 Android 12. Thank you!
Fantastic work, congratulations!