[twrp] [montana] [G5s] 3.2.3-0 - Moto G5S ROMs, Kernels, Recoveries, & Other Devel

[twrp] [montana] [G5s] 3.2.3-0 - Moto G5S ROMs, Kernels, Recoveries, & Other Devel

I think i have found a error. Cant decrypt files. TWRP from Squid a could do that. Your TWRP gives failed password error with correct password.

lohanbarth said:
Requirements
Unlocked bootloader
Fastboot drivers installed on PC
Instructions:
Download the TWRP image here: LINK
Rename the downloaded img file recovery.img
Put phone into fastboot mode (hold vol down + power button).
Connect phone to PC.
Open a command prompt where you have fastboot and the TWRP image file located.
Type the following in command prompt (recovery.img is the name of your twrp img you downloaded & renamed).
Code:
fastboot flash recovery recovery.img
Normal output:
Note for Windows 10 users who use the powershell and not cmd
The command will become:
Source Code:
Github
Contributors
@[email protected]@[email protected]
Version Information
Status: Stable
Current Stable Version: TWRP 3.2.2-0
Stable Release Date: 2018-07-05
Created 2018-07-05
Last Updated 2018-07-05
Click to expand...
Click to collapse
Support on Arm64 rom's?

Adamask said:
I think i have found a error. Cant decrypt files. TWRP from Squid a could do that. Your TWRP gives failed password error with correct password.
Click to expand...
Click to collapse
go to wipes and click on data format.
rssxda said:
Support on Arm64 rom's?
Click to expand...
Click to collapse
Yes

twrp 3.2.3 in op.

after wipe data and reboot the phone twrp is not there

Cesarcami53 said:
after wipe data and reboot the phone twrp is not there
Click to expand...
Click to collapse
it's normal you have to flash a .zip file so that it stays

Where is the twrp zip..??

Hello ! guys ... I'm without pc can I flash it for this app?

zanduo said:
Hello ! guys ... I'm without pc can I flash it for this app?
Click to expand...
Click to collapse
if the twrp application does not work, used flasify, you have to be root and have the bootloader unlock

lohanbarth said:
if the twrp application does not work, used flasify, you have to be root and have the bootloader unlock
Click to expand...
Click to collapse
I have root and twrp and bootloader .... the problem and that I am without pc ...
---------- Post added at 03:50 PM ---------- Previous post was at 03:27 PM ----------
lohanbarth said:
if the twrp application does not work, used flasify, you have to be root and have the bootloader unlock
Click to expand...
Click to collapse
Thanks man i use flasify And Works! Thanks ! Now i waiting for 64 roms

I have another problem. I managed to flash the recovery.img sucessfully (as described) and I can start TWRP. It functions properly, however every time I do a backup (not recovery!) after reboot the TWRP is gone.
How is that possible? Why the recovery partition gets overwriten or damaged by a simple backup?
How do I permanently flash the recovery partition with TWRP without need to reflash it every time?

RuKlowd said:
I have another problem. I managed to flash the recovery.img sucessfully (as described) and I can start TWRP. It functions properly, however every time I do a backup (not recovery!) after reboot the TWRP is gone.
How is that possible? Why the recovery partition gets overwriten or damaged by a simple backup?
How do I permanently flash the recovery partition with TWRP without need to reflash it every time?
Click to expand...
Click to collapse
flash a .zip file (magisk or a custom rom) to fix it

ur backup gets the original recovery of stock rom.. then, if u recovery u lost the twrp, but, if u recovery and reinstall twrp from twrp for .img, u dont lose him..

lohanbarth said:
flash a .zip file (magisk or a custom rom) to fix it
Click to expand...
Click to collapse
Thanks, it worked! So the recovery partition won't really (permanently) flash unless you root the device, right? Do I always need to root to permanently flash any other partition, too?
ilovepanda said:
ur backup gets the original recovery of stock rom.. then, if u recovery u lost the twrp, but, if u recovery and reinstall twrp from twrp for .img, u dont lose him..
Click to expand...
Click to collapse
Sorry, I had difficulties to understand you :/

if you make a backup, the backup will also add the recovery stock, so when restoring, it will also restore the backup of the recovery stock, it would be better to install the stock and before the first boot, install the twrp via .img

is this recovery only fot the xt1792, or can i also use it for the xt1794 ?

PhoenixGamer said:
is this recovery only fot the xt1792, or can i also use it for the xt1794 ?
Click to expand...
Click to collapse
You can

Related

[Developing] Android N Developer Preview / Images, OTA's & Flashables

The day of the N is upon us!
In typical developer preview tradition since lollipop - I will try and keep this thread up to date with the latest and greatest
Factory Images:
NPC56P
Factory Image Mirror:
https://www.androidfilehost.com/?w=files&flid=51765
To do a dirty flash official factory image files on marshmallow:
- Open flash-all.sh or flash-all.bat in a text editor (depending on which you use)
- Change fastboot -w update image-angler-npc56p.zip to fastboot update image-angler-npc56p.zip
- Run flash-all script
Click to expand...
Click to collapse
Flashables:
Preview 3: http://forum.xda-developers.com/showpost.php?p=66949607&postcount=1423
OTAs:
To sideload OTA via ADB:
On Windows: adb sideload android.zip
On Mac/Linux: ./adb sideload android.zip
Click to expand...
Click to collapse
Google's Preview page: https://developer.android.com/preview/download.html
Google IMG files (manual installation):
Instructions:
A clean install is highly recommended when coming from 5.x.x to "M"
DOES NOT wipe your SD card.
via flashable file:
- Boot into recovery (TWRP/CWM)
- Un-mount /system in TWRP/CWM
- Wipe: system, data, dalvik and cache
- Flash bootloader (optional - only needed if new)
- Flash ROM (be patient - takes a while)
- Flash SuperSU (optional)
- Flash radio (optional - only needed if new)
- Reboot (first boot takes a while)
Click to expand...
Click to collapse
via fastboot (manual installation):
SYSTEM PREP (skip if you already have fastboot/adb setup):
Let's setup ADB and fastboot
Windows:
- Automated: http://forum.xda-developers.com/showthread.php?t=2588979 (follow the steps in the software)
- Manual Method:
Download this file and extract the folder called "adb" to your C: drive. Your path should look like this:
Code:
C:\adb\
You will need to open a command prompt window using this method:
Code:
- Go to the C:\adb\ folder
- hold down SHIFT key and RIGHT-CLICK
- select "Open command window here".
In order to use ADB & Fastboot from anywhere - use the following steps to setup windows environment variables:
Navigate to & click on Start > Right-Click on Computer > click on Advance System Settings >
Click on Environment Variables (under the advanced tab) > Click on New (User Variables) >
Variables Name: ADB (Or anything you want) Variables Value: ;C:\adb (this is the Path of my adb.exe file)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mac & Linux:
Install ADB & fastboot using: this file
1. Extract the downloaded zip to your desktop
2. Open Terminal and type in:
Code:
su
cd Desktop/Android/ (note: Android is the directory extracted from zip file)
3. Now type
Code:
./ADB-Install-Mac.sh
Note: By using the method above, your adb and fastboot files are stored at this location on your Mac: /usr/bin/
----
Now that you're setup, let's do the flashing:
Boot into TWRP to wipe cache, dalvik, data (not internal storage/SD) and system.
Reboot to bootloader and flash the following:
fastboot flash bootloader <insert bootloader img name>
fastboot reboot-bootloader
fastboot flash radio <insert radio img name>
fastboot reboot-bootloader
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img // OR // fastboot flash boot <insert name of unecrypt boot.img>
fastboot flash cache cache.img
fastboot reboot
After you finish the above - reboot in to recovery (TWRP/CWM) and factory reset - then reboot
Click to expand...
Click to collapse
-------
FAQ
Disclaimer & Copyrights:
I test everything before I share - thus I know they work as intended. However, please proceed at your own risk as I do not take any liability for your devices.
Please do not copy contents of this guide without explicit permission from me. I like to maintain a set standard and quality of the information I share.
Please refrain from posting mirrors as I like to track downloads - I primarily use AndroidFileHost and they mirror files on multiple servers automatically.
Stay tuned!

that was quick. FIRST

abbz123 said:
that was quick. FIRST
Click to expand...
Click to collapse
as is tradition

Waiting for flashable zip, thanks!

Th3PorTuGa said:
Waiting for flashable zip, thanks!
Click to expand...
Click to collapse
lots of investigation needed first

looks like I'll be flashing this weekend.
btw the first link says "shamu" ?

hmillos said:
looks like I'll be flashing this weekend.
btw the first link says "shamu" ?
Click to expand...
Click to collapse
fixed, it was a typo

@vomer Your link in the OP is for Shamu. It should be Angler.

El Daddy said:
@vomer Your link in the OP is for Shamu. It should be Angler.
Click to expand...
Click to collapse
has been fixed already

If I follow this method, and make a TWRP backup before fastboot flashing everything, is it possible to restore the backup? Also do I loose my photos on the device etc with this method?

Some preview shots showing quick reply & split screen view: http://imgur.com/a/b4O6L

andresantos said:
If I follow this method, and make a TWRP backup before fastboot flashing everything, is it possible to restore the backup? Also do I loose my photos on the device etc with this method?
Click to expand...
Click to collapse
you should be able to restore the full twrp backup - however, do not use the flash all script in this case. Flash the images manually

Wait, is this a preview of N, as in Android 7?

so cool ! Thanks for this

floepie said:
Wait, is this a preview of N, as in Android 7?
Click to expand...
Click to collapse
yes
Btw before anybody ask
New Radio and Bootloader work also with M

vomer said:
you should be able to restore the full twrp backup - however, do not use the flash all script in this case. Flash the images manually
Click to expand...
Click to collapse
Thanks for the info. Which partitions should I backup thenm? Also bootloader and vendor etc? I will prepare for losing everything but most likely I won't be sticking with the version and would save much time if TWRP restore would work accordingly.
Btw, how stable does the preview seem? Does it look like you could possibly use it as a daily driver?

I dirty flashed and it worked so... But hey I know what I'm getting into.
Sent from my Nexus 6P using Tapatalk

Tylog said:
yes
Btw before anybody ask
New Radio and Bootloader work also with M
Click to expand...
Click to collapse
I'd be curious to see if this radio fixes any of the weird LTE/Signal hang issues the 6P has had the past few months..

N Beta Program OTA link: https://android.googleapis.com/pack...aeae3556.signed-signed-angler-ota-2659757.zip

I'm just going to wait for the flashable zip

[Recovery][6633][twrp] Unofficial TWRP 3.0.2 for Z3 Dual D6633

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bismillahi Alrahmani Alraheem
(in the name of God the most gracious, the most merciful)
Finally Unoffoicial TWRP 3.0.2 is here for Dual sim version of XPERIA Z3 (D6633)!!
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
And much more...
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
Source Code:
GitHub - https://github.com/omnirom/android_bootable_recovery
Gerrit Instance - http://gerrit.omnirom.org
Notes About Sony Devices:
The Xperia devices have a recovery-in-boot arrangement. This means that the recovery is booted using the regular kernel / boot image in the device. Team Win has worked with the FreeXperia device maintainers to come up with a way to extract the ramdisk from the FOTAKernel partition and use the ramdisk from that partition instead of the recovery that is included in the boot image of your device. This means that if you install current CM nightlies and flash TWRP to the FOTAKernel partition, you will be able to use TWRP instead of the CWM or CM recovery that normally comes in a CM boot image. Other boot images including stock kernels can be repacked to include this extraction utility to allow you to use TWRP from the FOTAKernel partition. This setup allows you to choose what recovery you want to have installed and allows you to update your recovery more easily. Unfortunately this setup requires that the boot image that you have installed include the ramdisk extraction utility. The source for this utility is here:
https://github.com/Dees-Troy/extract_elf_ramdisk
This utility is designed to work in conjunction with the current methods that most AOSP ROMs use for the ramdisk and can also be used on stock kernels. This setup means that you must have a kernel or boot image installed that will use the FOTAKernel method. Most AOSP based ROMs like OmniROM or CyanogenMod will support this method. Some stock kernels may also support the FOTAKernel method.
What does all this mean? It means that TWRP may not work on your device unless you install other custom software as well. Check with your ROM developer to see what they support.
DOWNLOAD:
Please notice that it won't work in stock based roms, only custom roms will run it
20160907 (img)
20160907 (zip)
Installation methods
TWRP Install (Requires TWRP 2.8.4 or higher already installed):
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
dd Install Method (Requires Root):
Download the latest image file (.img) from the download link above. Place it in the root of your /sdcard folder and rename it to twrp.img. Run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/recovery-twrp-302-z3dual.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Fastboot method:
you should have fastboot in your pc (either downloaded separately or with android SDK)
fire up Terminal (Linux and OS X) or CMD window (MS Windows) in the folder you have the image on it and it is preferred to copy the image to the folder of fastboot so the following command work then type:
Code:
fastboot flash FOTAKernel recovery-twrp-302-z3dual.img
don't forget to put ./ before 'fastboot' if you are using OS X or linux (./fastboot)
ZIP method:
flash the zip using any recovery
Themes and colors:
HERE
(Read Post #2 in the link if you want to customize, I'll be making pre-made themes later on inshaaAllah (God willing) )
NOTE: You are free to repack it and even sharing it without taking my permission
Please Donate If you want me to support Z3 dual more and more, it is back to you
XDA:DevDB Information
TWRP 3.0.2 for Z3 Dual D6633, Tool/Utility for the Sony Xperia Z3
Contributors
Muhammad Ashraf
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Testing
Created 2016-06-25
Last Updated 2016-09-07

Hi, one question, I choose the .img file from twrp but doesn't appear the "recovery" option to choose and swipe, only appears the "kernel" option, it is correct? Should I proceed with this option?

dquelal said:
Hi, one question, I choose the .img file from twrp but doesn't appear the "recovery" option to choose and swipe, only appears the "kernel" option, it is correct? Should I proceed with this option?
Click to expand...
Click to collapse
sorry for the late reply, I am not sure why does it act like that
i'll try to make a zip file for that issue

dquelal said:
Hi, one question, I choose the .img file from twrp but doesn't appear the "recovery" option to choose and swipe, only appears the "kernel" option, it is correct? Should I proceed with this option?
Click to expand...
Click to collapse
Oh, I am SOOOOOOOO Sorry, You have noticed me, By mistake I have uploaded Cyanogenmod Recovery instead of twrp
figuring that out now
I am sorry all of you
thanks man
EDIT: DONE

dquelal said:
Hi, one question, I choose the .img file from twrp but doesn't appear the "recovery" option to choose and swipe, only appears the "kernel" option, it is correct? Should I proceed with this option?
Click to expand...
Click to collapse
Unlocked or Locked bootloader?
(Does this require an unlocked bootloader?)

I cannot get to recovery mode using DD or fastboot
Command will go through but adb reboot or h/w combos wont get me recovery. How do I install recovery ? . I have a ROM that can only be installed via recovery pl help

I cannot get to recovery mode using DD or fastboot

FAILED (remote: Command not allowed)
it always says "FAILED (remote: Command not allowed)"
should the bootloader be unlocked ?!
what is the problem here?!

Hi, i flashed the .img using my twrp, the only option on "select partition" was kernel, i know i shouldn't have done it, but i did. Now the phone doesn't boot, it keeps on a black screen. I think i need to flash a new kernel, can someone help me? Thanks
edit
Locked bl

Excellent WORK +++++
Bismillahi Alrahmani Alraheem YOU are my god!
Well done. You are the man. Exellent work with this TWRP for my D6633 (z3 dual)
it saved my life!

bryantshurley said:
I cannot get to recovery mode using DD or fastboot
Click to expand...
Click to collapse
If you want to flash it with fastboot, type 'boot' instead of 'FOTAkernel', so the command goes like this: "fastboot flash boot recovery-twrp-302-z3dual.img". That way, you'll be able to boot into recovery using the volume rocker. A little late, but I hope I helped.

"fastboot flash boot recovery-twrp-302-z3dual.img" got me to a new recovery screen and can no longer boot the system.

rzepek2pl said:
If you want to flash it with fastboot, type 'boot' instead of 'FOTAkernel', so the command goes like this: "fastboot flash boot recovery-twrp-302-z3dual.img". That way, you'll be able to boot into recovery using the volume rocker. A little late, but I hope I helped.
Click to expand...
Click to collapse
That was a bad advice. Now I only have TWRP on my phone. Only boots into this!
Can it be saved? How?

Your 20160907.zip based on TWRP 3.0.2 was put into root & flashed with TWRP v2.8.7.0 which did not update, when re-launching recovery I was still on v2.8.7.0

[OREO]TWRP COMPLETE BACKUP

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Unlocked Honor 7x : See this [But don't flash twrp from anywhere else before backing up your device. Use twrpimgmount_ramdisk for backing it up first.]
Download:
TWRP Complete Backup
TWRP Img mount not tested yet
Instructions:
Flash twrpimgmount_ramdisk.img through fastboot
Code:
fastboot flash recovery_ramdisk twrpimgmount_ramdisk.img
Press and hole both volume + power on to boot to erecovery OR volume up + power on to boot to twrp (i don't know which combination is of which one) i suggest you to flash twrp to erecovery_ramdisk partition using twrp too.
Backup/restore and flash image functions are tested for system/vendor/product/version/cust/oeminfo/recovery/recovery2/boot rest of them are not tested by me but should work.
Note: It is suggested to make a complete backup in memory card before rooting your Honor 7x.
After backing up, flash TWRP Complete Backup Ramdisk
Join Telegram group if you are willing to test latest stuff
Credits:
Ported form Honor 6x : OP
Follow next:
1. Flash Magisk 16.0+ to root
XDA:DevDB Information
[OREO]TWRP COMPLETE BACKUP, Tool/Utility for the Honor 7X
Contributors
Sudeep Duhoon, Pretoriano80, zxz0O0
Version Information
Status: Testing
Created 2018-03-17
Last Updated 2018-04-07

For Nougat : Go Here

Reserved

TWRP on my OREO Beta Not Detecting My Phone on Pc no Response Please Check Ur Recovery

Can I do this with the Bnd-L24 model that has the bootloader unlocked with TWRP installed?

Great bhai

I was able to get twrp booted, but had issues backing up system & data
its mentioned elsewhere, but i didn't see mentioned here. this twrp is unable to read the /sdcard partition (internal storage), so you have to use a microsd card (external_sdcard).
My Process: (BND-L24 USA Honor 7x Oreo)
in bootloader:
Code:
fastboot flash recovery_ramdisk twrpimgmount_ramdisk.img
then reboot phone into recovery by holding both volume buttens + power
(i guess the ramdisk is loaded instead of the stock recovery)
once in twrp, i backed up the MANY partitions to my microsd card.
the backup failed for 2 partitions:
1) Data
Code:
createTarFork() process ended with ERROR: 255
2) System
failed at 87%, no error in the backup log, however the log was speckled with
Code:
unable to find partition for path '/system'
UPDATE: i was able to backup system using the file "complete_twrp_ramdisk.img" attached to this thread.
Other notes regarding this TWRP:
Computer doesn't see phone via USB
TWRP reports "no OS installed"
TWRP cannot read /sdcard (internal storage)
I look forward to trying future versions, and would be happy to help test things on my device if devs don't have this specific model.

topnomi said:
I was able to get twrp booted, but had issues backing up system & data
its mentioned elsewhere, but i didn't see mentioned here. this twrp is unable to read the /sdcard partition (internal storage), so you have to use a microsd card (external_sdcard).
My Process: (BND-L24 USA Honor 7x Oreo)
in bootloader:
Code:
fastboot flash recovery_ramdisk twrpimgmount_ramdisk.img
then reboot phone into recovery by holding both volume buttens + power
(i guess the ramdisk is loaded instead of the stock recovery)
once in twrp, i backed up the MANY partitions to my microsd card.
the backup failed for 2 partitions:
1) Data
Code:
createTarFork() process ended with ERROR: 255
2) System
failed at 87%, no error in the backup log, however the log was speckled with
Code:
unable to find partition for path '/system'
UPDATE: i was able to backup system using the file "complete_twrp_ramdisk.img" attached to this thread.
Other notes regarding this TWRP:
Computer doesn't see phone via USB
TWRP reports "no OS installed"
TWRP cannot read /sdcard (internal storage)
I look forward to trying future versions, and would be happy to help test things on my device if devs don't have this specific model.
Click to expand...
Click to collapse
Computer doesn't see phone via USB - Known bug
TWRP reports "no OS installed" - Intentional, it has to work like this.
TWRP cannot read /sdcard (internal storage) - Your internal sd is encrypted and this twrp has no decryption support

Sudeep Duhoon said:
Computer doesn't see phone via USB - Known bug
TWRP reports "no OS installed" - Intentional, it has to work like this.
TWRP cannot read /sdcard (internal storage) - Your internal sd is encrypted and this twrp has no decryption support
Click to expand...
Click to collapse
one further note, using the "complete_twrp_ramdisk.img" TWRP was able to see the installed OS, and offered to install the TWRP app.

Sudeep Duhoon said:
i suggest you to flash twrp to erecovery_ramdisk partition using twrp too.
Click to expand...
Click to collapse
What does this mean?
---------- Post added at 10:08 AM ---------- Previous post was at 09:36 AM ----------
I couldn't get it to backup. It always fails at data or system (If I don't select data).
Tried both images.

how can i flash the stock recovery? i was able to brick my device
Edit: nvm i fixed it

topnomi said:
I was able to get twrp booted, but had issues backing up system & data
its mentioned elsewhere, but i didn't see mentioned here. this twrp is unable to read the /sdcard partition (internal storage), so you have to use a microsd card (external_sdcard).
My Process: (BND-L24 USA Honor 7x Oreo)
in bootloader:
Code:
fastboot flash recovery_ramdisk twrpimgmount_ramdisk.img
then reboot phone into recovery by holding both volume buttens + power
(i guess the ramdisk is loaded instead of the stock recovery)
once in twrp, i backed up the MANY partitions to my microsd card.
the backup failed for 2 partitions:
1) Data
Code:
createTarFork() process ended with ERROR: 255
2) System
failed at 87%, no error in the backup log, however the log was speckled with
Code:
unable to find partition for path '/system'
UPDATE: i was able to backup system using the file "complete_twrp_ramdisk.img" attached to this thread.
Other notes regarding this TWRP:
Computer doesn't see phone via USB
TWRP reports "no OS installed"
TWRP cannot read /sdcard (internal storage)
I look forward to trying future versions, and would be happy to help test things on my device if devs don't have this specific model.
Click to expand...
Click to collapse
Hi, I'm glad to report that although the first recovery that is twrpimgmount_ramdisk.img failed to backup system as I got the same error message as above but I was able to flash some other partitions like kernel, recovery etc... I actually selected a bunch of them.
Anyway most importantly after flashing the complete_twrp_ramdisk.img, I was able to backup system successfully. I'm using the Indian variant BND AL10 MODEL. I hope this helps some one out there.
I have a dumb question: Now, that the system is backed up with twrp, if I mess up my phone ever, can I simply restore this system img and be able to boot back into the os? Do I need to install any other partitions? I don't care about data. Please let me know.

Hi, I flashed this complete_twrp_ramdisk.img and now I want to go back to stock recovery of oreo which is bnd_recovery_nocheck.img from the other post. I tried using adb and it fails. I tried using the this twrp but it shows a lot of partitions to choose from and I'm confused example: ramdisk recovery, recovery_vendor, recovery_ramdisk etc... there are sooooooo many. I tried recovery_vendor and also ramdisk but it doesn't work. Can you please tell me how to install the stock recovery?

Does anybody have a BND-L21 backup of the system partition?
Edit: nvm i found it

Can someone tell me how to install stock recovery after installing the above complete_twrp_ramdisk.img as I'm unable to flash using adb. I tried "fastboot flash recovery recovery.img" and also "fastboot flash recovery_ramdisk recovery.img" I tried flashing the BND_recovery_nocheck.img from the other post which is a stock one.
I also tried flashing it using this twrp to the partition recovery_ramdisk and gives the error saying "the size is larger than the device" Please someone help.

I have tried couple times to install new release
twrp_ramdisk_oreo_7-4-18.img
Click to expand...
Click to collapse
But I can only get to twrp splash screen.
OP change-log has no information about this new release, so maybe is still not ready.
telegram group has mention of this , but did not help Yet.
**EDIT**
It was suggested by DEV in telegram to just be patient and try again. This third time installed 4-7-2018 released version it loaded right into recovery, without any delay.
Don't know if it is coincidence or not but before I was on RRos ROM. and now I am back on EMUI 8

Well, the mess here you have gentlemen, nichrome you do not understand where the root for 7ku, where to 8ku, what tvrp to put for 8ki for everyday needs.
---------- Post added at 03:56 PM ---------- Previous post was at 03:52 PM ----------
Which TWRP can I put in order to flush the root on the 8th oreo?

What TWRP should I be using on RROS Room? In order to install Magisk?

what are the 2 images with dates for? twrp_ramdisk_oreo_19-4-18.img and twrp_ramdisk_oreo_7-4-18.img?
i tried flashing both in twrp after using fastboot to flash the inistial ramdisk and neither one boot into recovery they get stuck at the twrp splash screen but the image labeled complete_twrp_ramdisk.img boots fine.

darkmage1991 said:
what are the 2 images with dates for? twrp_ramdisk_oreo_19-4-18.img and twrp_ramdisk_oreo_7-4-18.img?
i tried flashing both in twrp after using fastboot to flash the inistial ramdisk and neither one boot into recovery they get stuck at the twrp splash screen but the image labeled complete_twrp_ramdisk.img boots fine.
Click to expand...
Click to collapse
Afaik they are test builds (ports) of data decryption enabled twrp.
I had them working when on the Oreo beta but cannot get to work on RR or the new official Oreo.

[Recovery][Mi 9][Cepheus]Unofficial TWRP recovery 3.3.0 b8 by LR.Team/wzsx150

Forgive My Poor English
It's For MI 9 (Not For MI 9 SE)
A Chinese Developer done this
The author's Email & Alipay Donate : [email protected]
The author's weibo :WEIBO
NEED UNLOCK BOOTLOADER and you can flash this recovery
Features and Notice:
1.NOT SUPPORT ENCRYPTED DATA PARTITION
2.Support Full Size offical MIUI ROM
3.NEED UNLOCK BOOTLOADER and you can flash this recovery
4.You can ROOT(magisk is the default) or UNROOT in this recovery
...
viberation not work in this recovery
More Partition in BACKUP/RECOVER
flash .bin & .mbn in Recovery(WARNING : DO NOT SELECT WRONG PARTITION)
...
and some other things
ps: DO NOT FORMAT VENDOR PARTITION (Or Do More Backup to Avoid this Situation)
DOWNLOAD
DOWNLOAD LINK
Beatryma said:
new update from wzsx150
TWRP 3.3.0 Beta 8:
https://mega.nz/#!CH5jgYTB!yNqOiVoo3cf0_15jIwZ-btO52cvpOG7iZrRCe19V2Nc
Click to expand...
Click to collapse
HOW TO FLASH
Power off your phone and press volume down key and press power key to boot to Fastboot Mode
Download Fastboot tools..
open a command line(cmd or powershell in windows) and change directory to the directory where fastboot tool locate(cd PATH/TO/FASTBOOT/TOOL), then you can use fastboot simplely
use
Code:
fastboot flash recovery [PATH TO THE IMAGE FILE YOU DOWNLOADED]
to flash(or grab that file into the cmd window, it will automaticly fill the full path of that file)
then use
Code:
fastboot reboot recovery
to boot the recovery(or just manually press volume up key and power key to reboot to recovery)
because this recovery is not support encrypted data partition, you can download flashable zip at computer and use
Code:
adb push THE/ZIP/FILE/YOU/DOWNLOAD /tmp/
(/tmp is a RAM-disk, means that the size of this partition is your free ram), you can push the flashable zip into your phone and flash it in recovery(or use otg storage devices, but the original author not mention it and Im not testing it)
IF YOUR BOOTLOADER IS LOCKED,but you wanna try it
You can use
Code:
fastboot boot [PATH TO THE IMAGE FILE YOU DOWNLOADED]
to only boot the recovery(not flash recovery)
(not sure 100% success)
Do anything on YOUR OWN RISK
Pictures(and How to set language to English )
I'm not the Author,again..
the author is wzsx150 from LR.TEAM
If you are using Xiaomi MI 9 SE OR OTHER PHONE,DO NOT FLASH THIS RECOVERY IN THIS THREAD.
First screen is 'Keep system partition read-only'
Left bottom is keep system RO,Right Buttom is change Language
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the Main screen and you can follow these steps to change Language to ENGLISH

Great, will try it asap

finally, this works ... where i find magisk for mi 9
but I'm wrong something .... I can't start it with the volume down key + power button

baggino said:
finally, this works ... where i find magisk for mi 9
but I'm wrong something .... I can't start it with the volume down key + power button
Click to expand...
Click to collapse
if you wanna boot into recovery mode ,press volume up key + power button

q792602257 said:
if you wanna boot into recovery mode ,press volume up key + power button
Click to expand...
Click to collapse
how do i go about entering twrp? with volume up and power button does not work
I wanted to try installing magisk, but maybe it's too early....

I can't make a backup with this TWRP.
Verstuurd vanaf mijn MI 9 met Tapatalk

Did you change TARGET_OTA_ASSERT_DEVICE or whatever from xiaomimi9 to cepheus? If not, it's still broken in some way.

*justintime* said:
I can't make a backup with this TWRP.
Verstuurd vanaf mijn MI 9 met Tapatalk
Click to expand...
Click to collapse
This recovery not support encrypted data partition(data partition is encrypted by default),the only way yo backup is connect a otg storage device(i'm not testing and the original author not mention whether support otg device)

msdx321 said:
Did you change TARGET_OTA_ASSERT_DEVICE or whatever from xiaomimi9 to cepheus? If not, it's still broken in some way.
Click to expand...
Click to collapse
Maybe not , I cant upgrade by manually download full size rom and click reboot to install at the stock updater, but you can download at computer and use
Code:
adb push THE/ZIP/FILE/YOU/DOWNLOAD /tmp/
(/tmp is a RAM-disk, means that the size of this partition is your free ram), you can push full size package into it and flash it in recovery
ps: the recovery doesnt support data decrypt, and I cant use sideload to flash these zips(TAT)

q792602257 said:
This recovery not support encrypted data partition(data partition is encrypted by default),the only way yo backup is connect a otg storage device(i'm not testing and the original author not mention whether support otg device)
Click to expand...
Click to collapse
I have mounted OTG with microsd card. But backup is not possible.
Verstuurd vanaf mijn MI 9 met Tapatalk

Rommco05 said:
and flash from OTG is possible?
Click to expand...
Click to collapse
Did not try...... I am fine with Xiaomi.eu atm and have no sense in installing everything again. [emoji16]
So if you flash from OTG it would be possible to backup??

Is this twrp support format data to remove encryption?

q792602257 said:
Forgive My Poor English
It's For MI 9 (Not For MI 9 SE)
A Chinese Developer done this
The author's Email & Alipay Donate : [email protected]
The author's weibo :WEIBO
NEED UNLOCK BOOTLOADER and you can flash this recovery
Features and Notice:
1.NOT SUPPORT ENCRYPTED DATA PARTITION
2.Support Full Size offical MIUI ROM
3.NEED UNLOCK BOOTLOADER and you can flash this recovery
4.You can ROOT(magisk is the default) or UNROOT in this recovery
...
viberation not work in this recovery
More Partition in BACKUP/RECOVER
flash .bin & .mbn in Recovery(WARNING : DO NOT SELECT WRONG PARTITION)
...
and some other things
ps: DO NOT FORMAT VENDOR PARTITION (Or Do More Backup to Avoid this Situation)
DOWNLOAD
DOWNLOAD LINK
HOW TO FLASH
Power off your phone and press volume down key and press power key to boot to Fastboot Mode
Download Fastboot tools..
open a command line(cmd or powershell in windows) and change directory to the directory where fastboot tool locate(cd PATH/TO/FASTBOOT/TOOL), then you can use fastboot simplely
useto flash(or grab that file into the cmd window, it will automaticly fill the full path of that file)
then use to boot the recovery(or just manually press volume up key and power key to reboot to recovery)
because this recovery is not support encrypted data partition, you can download flashable zip at computer and use
(/tmp is a RAM-disk, means that the size of this partition is your free ram), you can push the flashable zip into your phone and flash it in recovery(or use otg storage devices, but the original author not mention it and Im not testing it)
IF YOUR BOOTLOADER IS LOCKED,but you wanna try it
You can use to only boot the recovery(not flash recovery)
(not sure 100% success)
Do anything on YOUR OWN RISK
Pictures(and How to set language to English )
I'm not the Author,again..
the author is wzsx150 from LR.TEAM
If you are using Xiaomi MI 9 SE OR OTHER PHONE,DO NOT FLASH THIS RECOVERY IN THIS THREAD.
First screen is 'Keep system partition read-only'
Left bottom is keep system RO,Right Buttom is change Language
this is the Main screen and you can follow these steps to change Language to ENGLISH
Click to expand...
Click to collapse
是b5那个版本吗？

baszu said:
Is this twrp support format data to remove encryption?
Click to expand...
Click to collapse
Yes it is.

So this is the recovery I should try on my chinese mi 9, then install the EU rom from here?

perryano said:
So this is the recovery I should try on my chinese mi 9, then install the EU rom from here?
Click to expand...
Click to collapse
There is no Difference on which version to put. Though the Transparent

I prefer using this TWRP version, because support OTG.
Sent from my Xiaomi MI 9 using XDA Labs

Does this version can be install in MI9 TE?

giangnamytb said:
Does this version can be install in MI9 TE?
Click to expand...
Click to collapse
There is no difference For this version. Similar to the normal version

Hi all,
I have mi9 with 8gb china version.
1. Can I use this tmrw version?
2. If yes, I would flash gapps micro because currently google contact won't sync. Maybe any users in here have experience, can be sync or not with this
Sent from my MI 9 using Tapatalk

General [SHARED] RiceDroid 8.5 [13] [COMMUNITY] [ROM] Updated:25.11.2022

First I'm not the developper of this rom and just share it here
credits go to Maciej Mirosław
Link to download:
https://sourceforge.net/projects/rombuild/files/RiceDroid/
Clean Flash
1. Download the proper flashable ZIP for your device, as well as all additional images
2. Flash provided boot, vendor_boot via Fastboot
3. Reboot to Recovery
4. Sideload the ROM
5. Sideload firmware (if necessary)
6. Format data
7. Reboot to System
Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Sideload the ROM
4. Reboot to System
There is a guide how to flash custom rom thanks to @rayman95 if someone gets stuck during the process.
I personally tested it, and its working perfectly fine, no bugs or anything.

razor_1911 said:
First I'm not the developper of this rom and just share it here
credits go to Maciej Mirosław
Link to download:
https://sourceforge.net/projects/rombuild/files/RiceDroid/
Clean Flash
1. Download the proper flashable ZIP for your device, as well as all additional images
2. Flash provided boot, vendor_boot via Fastboot
3. Reboot to Recovery
4. Sideload the ROM
5. Sideload firmware (if necessary)
6. Format data
7. Reboot to System
Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Sideload the ROM
4. Reboot to System
There is a guide how to flash custom rom thanks to @rayman95 if someone gets stuck during the process.
I personally tested it, and its working perfectly fine, no bugs or anything.
Click to expand...
Click to collapse
This is a good ROM. Thanks!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Great! It is the same as CherishOS 4.2 a13gsi.

razor_1911 said:
First I'm not the developper of this rom and just share it here
credits go to Maciej Mirosław
Link to download:
https://sourceforge.net/projects/rombuild/files/RiceDroid/
Clean Flash
1. Download the proper flashable ZIP for your device, as well as all additional images
2. Flash provided boot, vendor_boot via Fastboot
3. Reboot to Recovery
4. Sideload the ROM
5. Sideload firmware (if necessary)
6. Format data
7. Reboot to System
Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Sideload the ROM
4. Reboot to System
There is a guide how to flash custom rom thanks to @rayman95 if someone gets stuck during the process.
I personally tested it, and its working perfectly fine, no bugs or anything.
Click to expand...
Click to collapse
It's a pity that the rounded corner effect on the widget is lost. Hope it will be fixed in the next version.

audio out by cable is working ?

I have updated to the latest rom v8.5 but still haven't added to the rom the rounded corner widget interface - google's precious thing.

Can one root via Magisk with this rom pls? I have to have Adaway, SD Maid, picky banking apps all working

How does one out TWRP on this A/B partition device pls?

TheDon13 said:
How does one out TWRP on this A/B partition device pls?
Click to expand...
Click to collapse
Hold down the power + volume down keys then enter fastboot.

TheDon13 said:
Can one root via Magisk with this rom pls? I have to have Adaway, SD Maid, picky banking apps all working
Click to expand...
Click to collapse
Just sideload the zip through twrp.

TheDon13 said:
Can one root via Magisk with this rom pls? I have to have Adaway, SD Maid, picky banking apps all working
Click to expand...
Click to collapse
Rename apk to zip then put in sd card and install via boot (boot is recovery mod).

razor_1911 said:
First I'm not the developper of this rom and just share it here
credits go to Maciej Mirosław
Link to download:
https://sourceforge.net/projects/rombuild/files/RiceDroid/
Clean Flash
1. Download the proper flashable ZIP for your device, as well as all additional images
2. Flash provided boot, vendor_boot via Fastboot
3. Reboot to Recovery
4. Sideload the ROM
5. Sideload firmware (if necessary)
6. Format data
7. Reboot to System
Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Sideload the ROM
4. Reboot to System
There is a guide how to flash custom rom thanks to @rayman95 if someone gets stuck during the process.
I personally tested it, and its working perfectly fine, no bugs or anything.
Click to expand...
Click to collapse
When you talk of recovery, do we mean TWRP custom recovery? As it is TWRP that I cannot get to fastbooot flash on this phone, due I think to it being an A/B device. My phone is bootloader unlocked but even doing fasttboot flash recovery to both partitions results in a fail. Grateful for any advice pls folks. Thanks

Aitra said:
Hold down the power + volume down keys then enter fastboot.
Click to expand...
Click to collapse
My problem is not being able to flash/install TWRP on this A/B device. It is rooted via Magisk fine, with adaway, sd maid, magisk all working fine. Banking apps all good thanks to freezing Magisk (Hide) within SD Maid

Maybe this info hasthe answer to my twrp issue!
[HowTo] Install Recovery image
How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu
Is this the kind of thing others followed?

TheDon13 said:
Maybe this info hasthe answer to my twrp issue!
[HowTo] Install Recovery image
How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu
Is this the kind of thing others followed?
Click to expand...
Click to collapse
you can follow the guide here https://forum.xda-developers.com/t/recovery-11-official-teamwin-recovery-project.4306807/

razor_1911 said:
you can follow the guide here https://forum.xda-developers.com/t/recovery-11-official-teamwin-recovery-project.4306807/
Click to expand...
Click to collapse
Many thanks Razor_1911....I'll give that a try

There is a new update guys, check it out. Released 25.11.2022

Error not rounding the widget corner outside the main screen.

Better Mobile App

welcome