I tried to upgrade my android version via TWRP and after few attempts I can't boot my samsung galaxy tab 2 in normal mode. It always boot in recovery mode using TWRP (doesn't metter if I use only power button or power button - vol. down). Wiping everthing didn't change anything. Tablet was rooted and it has original android version. Is something I can do to get it into normal mode, or I'm out of luck to day?
But from TWRP you have got the option to boot into Download mode .
Does this work, you can flash Stock ROM.
Sorry for that I didn't closed thread. I repair it with odin and flashing new rom.
Related
I have a Lenovo A390 and I want to put a custom ROM that supports english and Google Play store app.
It is currently using some Chinese OS without google Play app, so not much I can do.
Current status: It is rooted but I can not access recovery mode.
I used:
1. Root - Framaroot with the Boromir exploit, worked fine initially. Then I used Rashr.
2. Install Recovery - Rashr let me install TWRP so I installed LenovoA390_recovery.img and tried to reboot to recovery mode. At first time it worked, and I saw the TWRP application screen and did a full backup of my Lenovo_A390. Then I tried to install a custom ROM and I chose the image file and started to flash it. It went very quick and I rebooted it. It started again but same operative system came up.
Once I restart the phone and try to go to recovery mode I see the old Lenovo logo or similar with a small text below that it is entering recovery mode, and then it goes to a black screen and nothing happens.
Now I can not access recovery mode anymore, then I hold volume up and power button, all I see after a few seconds is the Lenovo logotype, and nothing else happens afterwards. I have tried to install the recovery image again (using Rashr), but I have the same problem all the time. It installs the recovery.img but when I try to boot into recovery mode, it is not working. I also tried with CWM recovery image, but I get the same problem. Lenovo
The phone is still rooted (Rashr is working) but I can not access recovery mode.
How can I get the recovery mode to work again, so I can install a different ROM without Chinese operator branding?
Thank you!
Warcious
Guys, What can I do if my screen turns black every time I try to go to RECOVERY mode?
The phone works fine, but when I try to go to recovery it JUST GOES black and I need to power it up again. How can I fix the recovery?
I have tried installing TWRP over Rashr, and it installs well, but just can not go to recovery mode.
Also, when I try to go to FASTBOOT MODE by holding POWER + VOLUM UP buttons, I only go to FACTORY MODE all the time.
Why is this happening like this, and WHY can't I go to FASTBOOT MODE?
Is it the same ?!?
Hi. I'm new here, and I really need help!
It started today when I'm tired of a disaster lagging using android 5.1.1 rom on my Galaxy tab 10.1 (GT-P7500).
So, I decided to flash a stock rom to go back to honeycomb 3.2
And basically, a volume down button on my tablet is broken. so I won't be able to reboot in recovery mode.
I tried reboot in download mode by pressing power + volume up button but it won't work either.
Then I managed to reboot in download mode and use Odin to flash a rom by using adb cmd but I didn't boot to recovery mode and wipe data/factory reset first(I don't know if this has something to do with this problem.)
And that brought me to a dead end problem.. Stuck at the logo while booting up. :crying:
I don't really know what else to do or is there some hope with this situation. I plugged a usb to my pc while in logo screen and it showed up as SAMSUNG_Android so when I check by typing adb devices in command it's there but can't get it to work since adb required debugging mode.
I think I will probably end up order a new button for replacement but I feel like I should ask a professionals first.
PCruzio said:
Hi. I'm new here, and I really need help!
It started today when I'm tired of a disaster lagging using android 5.1.1 rom on my Galaxy tab 10.1 (GT-P7500).
So, I decided to flash a stock rom to go back to honeycomb 3.2
And basically, a volume down button on my tablet is broken. so I won't be able to reboot in recovery mode.
I tried reboot in download mode by pressing power + volume up button but it won't work either.
Then I managed to reboot in download mode and use Odin to flash a rom by using adb cmd but I didn't boot to recovery mode and wipe data/factory reset first(I don't know if this has something to do with this problem.)
And that brought me to a dead end problem.. Stuck at the logo while booting up. :crying:
I don't really know what else to do or is there some hope with this situation. I plugged a usb to my pc while in logo screen and it showed up as SAMSUNG_Android so when I check by typing adb devices in command it's there but can't get it to work since adb required debugging mode.
I think I will probably end up order a new button for replacement but I feel like I should ask a professionals first.
Click to expand...
Click to collapse
Can you flash a TWRP recovery with Odin now? TWRP can support touch screen.
987987ken said:
Can you flash a TWRP recovery with Odin now? TWRP can support touch screen.
Click to expand...
Click to collapse
Hi Ken,
I have the similar problem like him, and the recovery mode was lost, i've try to flash a TWRP with Odin (twrp3000-20160207-p4.tar.md5) with AP button, it was PASS and restart, but still stuck in logo Samsung Galaxy Tab 10.1.
I don't know what to do, this is the 1st time i get this problem.
Need someone helps, thank a lot.
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
fahad999 said:
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
Click to expand...
Click to collapse
Try again to flash this
http://www.sammobile.com/firmwares/download/89343/G925TUVS4EPH2_G925TTMB4EPH2_TMB/
If it sticks on setup connection again, try a different usb port.
If after this it still bootloops try again to flash twrp and if this works wipe cache/dalvik.
If it doesn't work and just bootloops tell me of any errors you get during the process.
Thank you for the help! I hit the thanks button. I found out why Odin was stuck on setup connection and that was because I was using a bad USB cable, so I tried another cable. After that odin was not stuck on setup connection. Then I flashed stock firmware on Odin and now the phone works!. Thank you for the help!
So I have a Samsung Galaxy SII i9100 that I haven't used in months because the USB port wasn't working, therefore, cannot charge. I fixed it today, charged it and it as working (it as slow though, running CM13)
I wanted it to downgrade it back to JB so I can give it to mom but I didn't flash a suitable recovery first, so I flashed JellySnap ROM on TWRP recovery for CM13 and now it's stuck on bootloop (reboots every 4 seconds but skips the Samsung GS2 intro)
No the big problem is that the home button along with the menu key and the back key don't work, so I can't boot into recovery or download mode, so can't use ODIN.
Is there anything else I can do? Can I get to flash it or wipe it or at least access recovery/download mode through the PC (adb?) or using another phone via OTG?
zedex39zeo said:
So I have a Samsung Galaxy SII i9100 that I haven't used in months because the USB port wasn't working, therefore, cannot charge. I fixed it today, charged it and it as working (it as slow though, running CM13)
I wanted it to downgrade it back to JB so I can give it to mom but I didn't flash a suitable recovery first, so I flashed JellySnap ROM on TWRP recovery for CM13 and now it's stuck on bootloop (reboots every 4 seconds but skips the Samsung GS2 intro)
No the big problem is that the home button along with the menu key and the back key don't work, so I can't boot into recovery or download mode, so can't use ODIN.
Is there anything else I can do? Can I get to flash it or wipe it or at least access recovery/download mode through the PC (adb?) or using another phone via OTG?
Click to expand...
Click to collapse
What you mean "home, menu and back button don't work"? They are broken or you can't use them to get into recovery or download mode? You may be able to make or but a JTAG to get into download mode. If you get this far, you should be able to flash a recovery/kernel or stock rom with odin. Otherwise, you may have to take it to a repair center
Okay so i have been using my s6 edge for a while and got bored with the stock rom and the root was successful but when i flashed twrp onto it i rebooted and it stays on the Galaxy S6 Edge sreen (the one before the flashing samsung logo) it also says "kernel is not seandroid enforcing " but just stays on this screen until the batter dies out i have tried using odin and odin can't read it i tried samsung kies but that can't read it either so i have deemed my pc useless in this situation
really need this phone to work so any advice would be much appreciated
Casey98 said:
Okay so i have been using my s6 edge for a while and got bored with the stock rom and the root was successful but when i flashed twrp onto it i rebooted and it stays on the Galaxy S6 Edge sreen (the one before the flashing samsung logo) it also says "kernel is not seandroid enforcing " but just stays on this screen until the batter dies out i have tried using odin and odin can't read it i tried samsung kies but that can't read it either so i have deemed my pc useless in this situation
really need this phone to work so any advice would be much appreciated
Click to expand...
Click to collapse
Can you get into download mode or recovery mode?
If you can get into recovery mode then wipe data/cache.
If you can get to download mode flash stock firmware and start again.
To get into recovery hold only down and power for 10 seconds, as soon as the screen goes off to reboot switch to recover combo, home and up amd power for 20 seconds until it boots to recovery. Try that first.
callumbr1 said:
Can you get into download mode or recovery mode?
If you can get into recovery mode then wipe data/cache.
If you can get to download mode flash stock firmware and start again.
To get into recovery hold only down and power for 10 seconds, as soon as the screen goes off to reboot switch to recover combo, home and up amd power for 20 seconds until it boots to recovery. Try that first.
Click to expand...
Click to collapse
this is where my problem begins the home button on the phone clicks but doesn't work the fingerprint sensor still works fine thats it so i was using adb commands from the terminal to boot it into recovery/download mode but now it just gets to the galaxy s6edge screen then just stays there so my computer can't read it so its stuck