Hey guys,
when I try to flash my Huawei Mate 10 Lite, i can successfully apply the fastboot flash command, but the reboot command does not do anything anymore. After using the flash command, the device can still be found by fastboot. After this fail, i can reboot by pressing the power button for a few seconds. But when i boot to recovery again, it does not show twrp but the standard recovery.
Code:
Twrp-Mate 10 Lite Nougat-KingOfMezi user1$ fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.027s]
finished. total time: 0.027s
Twrp-Mate 10 Lite Nougat-KingOfMezi user1$ fastboot flash recovery TWRP_3.1.1-0_RNE-L21_v02S_20180125.img
target reported max download size of 471859200 bytes
sending 'recovery' (25170 KB)...
OKAY [ 0.751s]
writing 'recovery'...
OKAY [ 0.128s]
finished. total time: 0.879s
Twrp-Mate 10 Lite Nougat-KingOfMezi user1$ fastboot devices
2VN5T18411002610 fastboot
Twrp-Mate 10 Lite Nougat-KingOfMezi user1$ fastboot reboot
NOTHING HAPPENS NOW
I'm doing this on macOS with all adb tools and fastboot installed (obviously, since all other commands work). FRP And Phone are unlocked.
How can I get the reboot command to work so the twrp flash does not go away after i restart by pressing and holding the power button?
Related
Hello guys,
I've flashed TWRP for Nexus 9 2.8.6:
Code:
#adb devices
List of devices attached
HT4C3WV01363 device
#adb reboot bootloader
#fastboot devices
HT4C3WV01363 fastboot
#fastboot flash recovery twrp-2.8.6.0-flounder.img
target reported max download size of 518205818 bytes
sending 'recovery' (13208 KB)...
OKAY [ 0.744s]
writing 'recovery'...
(bootloader) Device State : Unlocked
OKAY [ 0.867s]
finished. total time: 1.612s
There's no way to continue into recovery without rebooting:
Code:
#fastboot reboot
rebooting...
finished. total time: 0.099s
#adb reboot recovery
... leads to a fallen Android! (see attached screenshot)
Any suggestion?
Fastboot flash TWRP recovery again.
After doing above, don't touch your PC again. Pick up your device and use volume button to navigate to hboot, then navigate to recovery and use power button to select.
Done.
Yes, thanks!
actionmystique said:
Yes, thanks!
Click to expand...
Click to collapse
Welcome. And FWIW: there's a button for that...
Now that we have our own forum I figure I might as well put this here (taken from guide here).
1. Unlock the boot loader with the instructions / app from Asus
2. Download TWRP. Specifically twrp-3.1.0-0-Z01H-20170408.img ** [edit: also rename to twrp.img once downloaded]
4. Reboot to fastboot by rebooting the phone, and pressing the down arrow during the unlock screen.
5. Flash the recovery image `fastboot flash recovery twrp.img`
6. I had to power cycle the phone completely to get TWRP running.
Original post:
https://www.reddit.com/r/zenfone/comments/6gqha5/zenfone_3_ze553kl_z01hd_root/
C:\adb>fastboot.exe flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (33422 KB)...
OKAY [ 0.737s]
writing 'recovery'...
OKAY [ 0.454s]
finished. total time: 1.197s
It's not working, I have no idea why.
So I've gotten in a position where I can only get into FASTBOOT&RESCUE MODE on my Honor 9, so no TWRP, no eRecovery and no Android. I got here when I tried to install STF_RECOVERY_OREO_NoCheck.img from the terminal in TWRP.
From my Ubuntu (17.10) PC I can see the device in fastboot, but trying to flash TWRP (or any other image) gives me an error:
sudo fastboot flash recovery twrp-3.1.1-oreo-stf.img
target reported max download size of 471859200 bytes
sending 'recovery' (20336 KB)...
OKAY [ 0.651s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.656s
In FASTBOOT&RESCUE MODE it says:
PHONE Unlocked
FRP Lock
The device doesn't show up in ADB. It shows up in "lsusb" as a Google device, so I tried both Google as Huawei USB drivers.
I've just unlocked the phone, via minimal ADB
tried fastboot getvar current-slot and got the output that my slot was a
then I've tried flashing TWRP at a utilizing
fastboot flash recovery twrp.img
then got the following output:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp.img
target reported max download size of 803868672 bytes
sending 'recovery' (39780 KB)...
OKAY [ 1.663s]
writing 'recovery'...
FAILED (remote: (recovery_a) No such partition)
finished. total time: 1.695s
so, I've tried fastboot flash boot twrp.img
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot recovery.img
target reported max download size of 803868672 bytes
sending 'boot_a' (35452 KB)...
OKAY [ 1.063s]
writing 'boot_a'...
OKAY [ 0.183s]
finished. total time: 1.254s
then I've manually pressed the power button + volume up and successfully entered TWRP
there, I've gone to advanced wipe and wiped
Dalvik / ART Cache, system, Data and Internal Storage
I didn't know Internal Storage would give me problems... After that, I couldn't access my internal storage from the PC to copy the .zip of the custom rom.
Tried going to mount into TWRP to mount different partitions, no succes.
Then I thought that maybe if I restarted the phone it would be ok. So I've restarted and TWRP told me "no system installed, do you wish to continue?" I said yes.
Now, I'm stuck at fastboot and can't boot into twrp anymore...
I've tried repeating the same commands above and got the same outputs.
fastboot flash boot twrp.img got me the "OKAY" messages. But now, even if I hold the power + vol up button, I won't get to recovery.
I've tried
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 1.291s]
booting...
FAILED (remote: unknown command)
finished. total time: 1.298s
because my frient told me to do so, but this command does not exist.
How can I proceed?
Try using mi flash tool
I was also stuck in fastboot mode I then tried installing twrp again with no success.
So I then went and flashed stock rom again into my phone using mi flash tool.
(Having a new account, I can't post link to these files. So download the files from official mi website, it is available there)
Steps to flash
1- Place the Flash File on Desktop.
2- open flash tool application.
3- Assign the Folder path.
4-Go to slot a using adb
5- Click on refresh & then tap Flash button
Hi,
My LG5 850 is rooted and wiped, after testing another custom ROM. However, this time I can't reboot into recovery using the Vol-dwn/Power key-combination. Always ending-up in fastboot
Is there a command to take it from there?
Thanks a lot!
Bash:
fastboot reboot recovery
Should generally do the trick.
Unfortunately not:
LG5# fastboot reboot recovery
fastboot: usage: unknown reboot target recovery
Also tried:
LG5# fastboot flash recovery twrp-3.4.0-0-h850.img
target reported max download size of 536870912 bytes
sending 'recovery' (21124 KB)...
OKAY [ 0.681s]
writing 'recovery'...
OKAY [ 0.226s]
finished. total time: 0.907s
LG5# fastboot reboot twrp-3.4.0-0-h850.img
fastboot: usage: unknown reboot target twrp-3.4.0-0-h850.img