Related
Hi,
I currently have .570 fw installed with root, dualrecovery, xposed,... and wonder how to update to .575 w/o losing them. Can I just create flashable zip and that's it, or should I use the original guide that I used to update from LP to MM ([Stock][Z2(D6503) 6.0.1 Marshmallow][.570][Prerooted+ TWRP + Xposed][LB])?
//UPDATE: If you want to upgrade too, then grab files from this post and follow "nurps" guide here.
//UPDATE 2 (To avoid misunderstanding):
1. Make sure you download both files from here
2. In PRF Creator, insert your FTF as FTF File, dummy_flashable.zip as SuperSU and RecRootV4_combined.zip as Recovery.
3. Flash in recovery, if you want xposed, flash it separately afterwards.
4. Wipe cache
5. Reboot and that should be it.
//UPDATE 3
Also works for .291!
Well and without losing recovery would be important too. I'm ready with PRF Creator, but where do I get that TWRP Recovery zip from that works with MM?
nurps said:
Well and without losing recovery would be important too. I'm ready with PRF Creator, but where do I get that TWRP Recovery zip from that works with MM?
Click to expand...
Click to collapse
I'm not sure that we are having the same issue... I am already on MM, with recovery, etc. And want to update to newer version of MM.
btw if you just want dual recovery for MM you can visit the guide I mentioned earlier. You won't get .zip, since it's flashed by adb, but it works just the same.
Yes and when you reflash you have to reflash a rooted image and also recovery, or its gone.
nurps said:
Yes and when you reflash you have to reflash a rooted image and also recovery, or its gone.
Click to expand...
Click to collapse
I see.. Now I know what you mean... The thing is... I would assume that you would just flash it the same way you did from LP to MM.. flash ROM (w/o recovery), then flash SuperSU, boot Android and use the adb recovery flasher... But i don't really want to spend hours getting things to normal if that doesn't work. So I'm hoping someone braver already done this and will shed some light on how it really is...
Actually I dont remember how it went, but now that you mention it, than a prerooted firmware should be enough, maybe I'll try tomorrow. Of course a flashable backup would make it easier if anything happens.
nurps said:
Actually I dont remember how it went, but now that you mention it, than a prerooted firmware should be enough, maybe I'll try tomorrow.
Click to expand...
Click to collapse
Yeah... The problem was, after flashing MM and SuperSU, you had to pray that when Android boots up, you will have root permissions. If not, then it was game over, as you no longer had dual recovery...
Anyway... If you'll try, let me know how it went. I would really appreciate it!
Prerooted PRF creator file didn't work, root is lost.
nurps said:
Prerooted PRF creator file didn't work, root is lost.
Click to expand...
Click to collapse
That's what I was afraid of... Have you tried flashing SuperSU after flashing ROM? I know that you can insert it in the ROM, but just to be sure I find it "safer" to flash separately.
Because I got an error on supersu I actually did reflash it, but the same error message appeared. Should have stopped there and reflashed my backup....I didnt...
nurps said:
Because I got an error on supersu I actually did reflash it, but the same error message appeared.
Click to expand...
Click to collapse
And do you remember what error it was by any chance? We could probably find out why you lost root permissions that way...
No, sorry.
nurps said:
No, sorry.
Click to expand...
Click to collapse
That's a shame... Nevermind, what version of SuperSU were you flashing?
can u fetch me the ftf link ?
medalogii said:
can u fetch me the ftf link ?
Click to expand...
Click to collapse
Not sure what link you mean... Can you be more specific?
nurps said:
Because I got an error on supersu I actually did reflash it, but the same error message appeared. Should have stopped there and reflashed my backup....I didnt...
Click to expand...
Click to collapse
It's annoying, but at least you won't lose anything, as long as you have that backup... Now, you will have to downgrade to LP, root, flash back to MM, get recovery, flash your backup and done (if you want root back, that is of course, which I would strongly recommend for MM, as there are some things that would really bother me, if I didn't have root).
It's not the best solution, as it takes quite the time, but at least you have backup... could have been worse, take it that way...
Sorry my bad, I Was looking for the ftf now I'm downloading it with xperifirm,, now I'm looking for the recovery and supersu files to try,,
Sent from my D6503 using XDA-Developers mobile app
Thats a bit overcomplicated. I wasted some hours to find a rootable FTF though, 3rd I tried (D6503_17.1.A.2.69) worked, then it's just nuts dual recovery (with its own root exploit included) and restore.
For the other stuff I should have kept up, apparently for MM you include dummy_flashable for root not supersu and RecRootV4_combined is actually available as flashable recovery.
https://mega.nz/#!dtYQSYKa!V3cV1KUB2XPMn71wJHPPAwLrrVvB_hG7JPoun9WQ7AM
https://mega.nz/#!8woHjZyb!ksx9rXDSOnS_zUncNiYw0JbfUIt14YU61Fwc8Wrcjz8
nurps said:
Thats a bit overcomplicated. I wasted some hours to find a rootable FTF though, 3rd I tried (D6503_17.1.A.2.69) worked, then it's just nuts dual recovery (with its own root exploit included) and restore.
For the other stuff I should have kept up, apparently for MM you include dummy_flashable for root not supersu and RecRootV4_combined is actually available as flashable recovery.
https://mega.nz/#!dtYQSYKa!V3cV1KUB2XPMn71wJHPPAwLrrVvB_hG7JPoun9WQ7AM
https://mega.nz/#!8woHjZyb!ksx9rXDSOnS_zUncNiYw0JbfUIt14YU61Fwc8Wrcjz8
Click to expand...
Click to collapse
So, now you have .575 with root/recovery? And if, then you just create flashable.zip from your FTF and include dummy_flashable, flash in recovery and then flash RecRootV4_combined?
Nope not done yet. Trying now.
So i had a hardricked phone(i thought) but than it worked again. So i flashed pacrom and it went in a hardbrick like state again (using twrp btw)I flashed it with nano gaps and the b330 package so you could get the fingerprint scanner. Than after an hour or so it worked again. Than i started running my battery low on purpose so i knew if it was just stuck or if it was something else. When my phone dies it will reboot again and work. And then i flashed rr with the nano gapps and the b330 package and it did this again, I thought it might have something to do with the b330 package so i flashed it without and it still did this. Then i thought it might have something to do with my twrp because i was still running on version 3.0.0 so i flashed the newer version through fastboot and it did this again!!
I dont know what is going on but my phone is acting really strange.
Does someone know of this problem or has ever heard of it or is my phone just strange?
jimandroidnerd said:
So i had a hardricked phone(i thought) but than it worked again. So i flashed pacrom and it went in a hardbrick like state again (using twrp btw)I flashed it with nano gaps and the b330 package so you could get the fingerprint scanner. Than after an hour or so it worked again. Than i started running my battery low on purpose so i knew if it was just stuck or if it was something else. When my phone dies it will reboot again and work. And then i flashed rr with the nano gapps and the b330 package and it did this again, I thought it might have something to do with the b330 package so i flashed it without and it still did this. Then i thought it might have something to do with my twrp because i was still running on version 3.0.0 so i flashed the newer version through fastboot and it did this again!!
I dont know what is going on but my phone is acting really strange.
Does someone know of this problem or has ever heard of it or is my phone just strange?
Click to expand...
Click to collapse
I have no idea why you keep flashing the firmware b330 it only needs done one time
clsA said:
I have no idea why you keep flashing the firmware b330 it only needs done one time
Click to expand...
Click to collapse
i didnt know that. so is that whats causing my issue and can it be fixed?
ps: now its doing it again cuz i flashed the newest twrp through fastboot
jimandroidnerd said:
i didnt know that. so is that whats causing my issue and can it be fixed?
ps: now its doing it again cuz i flashed the newest twrp through fastboot
Click to expand...
Click to collapse
you need to consider putting your phone back to stock using the dload / update.app for your version nd leave it their until you figure out if your phone is broken or not. flashing roms is just confusing the situation.
jimandroidnerd said:
i didnt know that. so is that whats causing my issue and can it be fixed?
ps: now its doing it again cuz i flashed the newest twrp through fastboot
Click to expand...
Click to collapse
Hi Jim, Indeed you need to fully revert back and see if it works.. i will provide you some links since we are from the same region/country.
1. Flash the stock recovery
2. Download this file and put the update.app in a file named 'dload' on the root of your sdcard.
3. Shutdown the phone hold Volume Up+Down and Hit the power button it should start booting and applying the update. Just leave it for like 30 minutes and u should be back at B130 firmware. Then you should receive a update for B140 and once you are on B140 u can upgrade back to B330.
Report back if it worked or you encountered any other issues!
clsA said:
you need to consider putting your phone back to stock using the dload / update.app for your version nd leave it their until you figure out if your phone is broken or not. flashing roms is just confusing the situation.
Click to expand...
Click to collapse
Demian3112 said:
Hi Jim, Indeed you need to fully revert back and see if it works.. i will provide you some links since we are from the same region/country.
1. Flash the stock recovery
2. Download this file and put the update.app in a file named 'dload' on the root of your sdcard.
3. Shutdown the phone hold Volume Up+Down and Hit the power button it should start booting and applying the update. Just leave it for like 30 minutes and u should be back at B130 firmware. Then you should receive a update for B140 and once you are on B140 u can upgrade back to B330.
Report back if it worked or you encountered any other issues!
Click to expand...
Click to collapse
I will do that. thanks for the help everyone
clsA said:
you need to consider putting your phone back to stock using the dload / update.app for your version nd leave it their until you figure out if your phone is broken or not. flashing roms is just confusing the situation.
Click to expand...
Click to collapse
Demian3112 said:
Hi Jim, Indeed you need to fully revert back and see if it works.. i will provide you some links since we are from the same region/country.
1. Flash the stock recovery
2. Download this file and put the update.app in a file named 'dload' on the root of your sdcard.
3. Shutdown the phone hold Volume Up+Down and Hit the power button it should start booting and applying the update. Just leave it for like 30 minutes and u should be back at B130 firmware. Then you should receive a update for B140 and once you are on B140 u can upgrade back to B330.
Report back if it worked or you encountered any other issues!
Click to expand...
Click to collapse
Ok so i have gone back to stock, everything is working again as far as i can tell. Just done it 10 minutes ago. I will test for a week to see if erverything is working properly. Is it safe to flash custom roms / recovery after i have confirmed everything is working properly? Thank you guys so much for the help btw, i really appreciate it!:good:
jimandroidnerd said:
Ok so i have gone back to stock, everything is working again as far as i can tell. Just done it 10 minutes ago. I will test for a week to see if erverything is working properly. Is it safe to flash custom roms / recovery after i have confirmed everything is working properly? Thank you guys so much for the help btw, i really appreciate it!:good:
Click to expand...
Click to collapse
did you take all the updates to b330 ? if so you can pretty safely go to CM13 + gapps nano without any worries.
use one of the newest versions of TWRP
Do a factory reset and flash only CM13 and gapps
reboot let it fully load .. reboot to recovery / backup your fresh install to ext-sd
boot back to the OS and setup your new device.
Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...-unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
MrKnight230 said:
Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
Click to expand...
Click to collapse
No problem mate, Community is Here to help!
The matter is, ROMs built after 18/8/2016 requires that you upgrade to Marshmallow stock ROM that means EMUI 4.0.
then you can flash the custom ROMs without problems.
If you're on bootloop, can you boot to fastboot or TWRP manually?
MrKnight230 said:
Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
Click to expand...
Click to collapse
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
mumith3 said:
No problem mate, Community is Here to help!
The matter is, ROMs built after 18/8/2016 requires that you upgrade to Marshmallow stock ROM that means EMUI 4.0.
then you can flash the custom ROMs without problems.
If you're on bootloop, can you boot to fastboot or TWRP manually?
Click to expand...
Click to collapse
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
MrKnight230 said:
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
Click to expand...
Click to collapse
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
MrKnight230 said:
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
Click to expand...
Click to collapse
Is it an update.app file?
Then you have to force update. Refer to @clsA 's thread.
Cheers.
clsA said:
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
Click to expand...
Click to collapse
mumith3 said:
Is it an update.app file?
Then you have to force update. Refer to @clsA 's thread.
Cheers.
Click to expand...
Click to collapse
muradulislam said:
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Got it from this page for KIW-L21: stech guide.com/honor-5x-stock-marshmallow-firmware/ (I'm not allowed to post links yet because I'm new.. You just need to delete the space, should work then)
Sadly I got the file deleted and have to download it again, but right now my Internet is slow af.. Gonna need at least 5 hours to go...
MrKnight230 said:
Got it from this page for KIW-L21: stech guide.com/honor-5x-stock-marshmallow-firmware/ (I'm not allowed to post links yet because I'm new.. You just need to delete the space, should work then)
Sadly I got the file deleted and have to download it again, but right now my Internet is slow af.. Gonna need at least 5 hours to go...
Click to expand...
Click to collapse
Well, Wait, Honor 5x has many variants. So download only your device variant
Search this thread >>> http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
Hope it helps.:highfive:
Cheers! :good:
mumith3 said:
Well, Wait, Honor 5x has many variants. So download only your device variant
Search this thread >>> http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
Hope it helps.:highfive:
Cheers! :good:
Click to expand...
Click to collapse
got the right one now, download worked faster than expected.
Is there any possibility to install the dload file without using a sd-card?
MrKnight230 said:
got the right one now, download worked faster than expected.
Is there any possibility to install the dload file without using a sd-card?
Click to expand...
Click to collapse
No mate, You'll need a SD card.!!!
mumith3 said:
No mate, You'll need a SD card.!!!
Click to expand...
Click to collapse
clsA said:
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
Click to expand...
Click to collapse
muradulislam said:
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Phone works again now! I love all of you!!!
MrKnight230 said:
Phone works again now! I love all of you!!!
Click to expand...
Click to collapse
Enjoy and do come back
Just kidding...
Sent from my PLK-L01 using XDA Labs
Hey guys! I am newbie of this forum just got heard from my friends to share u guys about my problem. Let me tell everything detailed. Last night i have installed Andvance tool pro from a site it required root access. Well my phone is rooted so i gave root access i tried to do some tweaks. First the app reuired a restore i did at the last i restored it but it doesnt happen anything. I was just getting Phone has stopped pop up so i restarted my phone. After i got to see the home has gone nothing is working all my system apps had deleted and only a few left. I can go to recovery option. Now tell me how do i get my system apps to install from recovery and whats the way to install. My phone is INew CXQ U1 version 2.0.0 Mt5672 os 4.4.2. I didnt keep backup so i am badly need of ur help guys. Please i am so much worried about this. I am using it as a useless phone now. Keyboard has gone launcher has gone. Huhu
Alaminkhan said:
Hey guys! I am newbie of this forum just got heard from my friends to share u guys about my problem. Let me tell everything detailed. Last night i have installed Andvance tool pro from a site it required root access. Well my phone is rooted so i gave root access i tried to do some tweaks. First the app reuired a restore i did at the last i restored it but it doesnt happen anything. I was just getting Phone has stopped pop up so i restarted my phone. After i got to see the home has gone nothing is working all my system apps had deleted and only a few left. I can go to recovery option. Now tell me how do i get my system apps to install from recovery and whats the way to install. My phone is INew CXQ U1 version 2.0.0 Mt5672 os 4.4.2. I didnt keep backup so i am badly need of ur help guys. Please i am so much worried about this. I am using it as a useless phone now. Keyboard has gone launcher has gone. Huhu
Click to expand...
Click to collapse
Seems like you need to install a new rom on your phone. Do you have a custom recovery? If yes, what recovery do you have?
I can give you a new rom and instructions on how to install it, but you will need CWM or TWRP for that.
Cheers,
Kuba P.
KiwiTheOne said:
Seems like you need to install a new rom on your phone. Do you have a custom recovery? If yes, what recovery do you have?
I can give you a new rom and instructions on how to install it, but you will need CWM or TWRP for that.
Cheers,
Kuba P.
Click to expand...
Click to collapse
Unfortunately, I didnt install any custom recovery into my phone. ?? Is there any way left to fix?
Alaminkhan said:
Unfortunately, I didnt install any custom recovery into my phone. ?? Is there any way left to fix?
Click to expand...
Click to collapse
If you don't have any custom recovery then you want to flash stock rom of your android.
Ashwinrg said:
If you don't have any custom recovery then you want to flash stock rom of your android.
Click to expand...
Click to collapse
No matter bro I will flash with stock rom. Please tell me process and files to use. I never ever flashed before so this will be the first time for me. I will go with your process step by step. I have pc also but it will be better by my phone only.
Alaminkhan said:
No matter bro I will flash with stock rom. Please tell me process and files to use. I never ever flashed before so this will be the first time for me. I will go with your process step by step. I have pc also but it will be better by my phone only.
Click to expand...
Click to collapse
You need to do some research before you make things worse. You will have to have a pc. Then it is a simple matter of flashing the device which will wipe it completely.
Alaminkhan said:
No matter bro I will flash with stock rom. Please tell me process and files to use. I never ever flashed before so this will be the first time for me. I will go with your process step by step. I have pc also but it will be better by my phone only.
Click to expand...
Click to collapse
Watch these YouTube video. You get flashing procedure in SP flash tool and download link of stock rom in video description.
You need SP flash tool to flash your android.
Download from here
Sorry for saying this , but you should be aware that Rooting a device has its own ups and down/
You should have researched more and must have had a custom recovery incase things go awry.
Now that things have gone bad , the only option you have is flash a rom for your device using SP Flash Tool.
Google for your phone model and download firmware and flash the rom
If you have any trouble finding a rom or flashing it , please feel to contact me.
-Edit:
https://drive.google.com/file/d/0B7IRNMn_vYgSLVVEdE5UQm5HTms/view?usp=drivesdk
Download the above file , extract it and follow https://www.youtube.com/watch?v=Y3bxYYX9Xk8
Make sure you have driver for your device installed properly.
Guys Thanks a lot. I have successfully flashed my phone with SP tools. It has been a great experience for me as I did it for the first time even I was really excited. I really knew it that u guys help will really work. Thanks once again and love u all. Now I wont dare to flash my phone with custom rom well I will install CMW first haha
lesson learned.
Just whant to share dd backup I did who are test and working for at least BND-L21.
dd rip of official OTA 8.0.0.330.
If someone have need.
Cust.img : https://mega.nz/#!q9tn2C6T!JMMSDYN5qc4BQrmKwtjifGqg26Je8SjiToPBM7wktp4
Kernel.img : https://mega.nz/#!Kg8AADgJ!PmBFU4vM1nTvcJnT-AttXBvV7IIh93xdEPgSY9kE0BE
Product.img : https://mega.nz/#!zk8glLyJ!HIKFQoEMuShRYYvm3SWeIfmpLa3LrOI_ahpJ2PDFQXc
Ramdisk.img : https://mega.nz/#!WokUmYZJ!zusLmvamHNUfEVkzn-oEg3rescsnuPG29iRUlQM3E8M
Vendor.img : https://mega.nz/#!H5VnUJxZ!rSI4rg2Hy-cNn9-I1-dMt2y0MHq45ypu2MqL_OP7SZY
Version.img : https://mega.nz/#!q0d2ASiK!20PPaQcjevG_3Hzu1qeBS3ye6FnfG9pL6htA6vy5E8c
System.img : https://mega.nz/#!ShVTHRYJ!-Ha-K9UgKahc7KkRRSRHPkpuLSC4Yr0sZ_kCzEumRs0
If you don't use BND-L21 then use this files at your own risk.
it would have been nice
if files were on some other filehost.
plz share oeminfo too
kdark said:
plz share oeminfo too
Click to expand...
Click to collapse
Wiil try and do
U think it will work on L24?
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Had to put them in a separate post if I didn't wanna go through the trouble of moving the screenshots to my PC and uploading them there
Thanks man, it's great..:good::good::good::good::good:
XandeR180 said:
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Click to expand...
Click to collapse
plz share your ramdisk img file i tried to find it but didn't get it
XandeR180 said:
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
Click to expand...
Click to collapse
I would be very interested in the stock ramdisk_recovery, could you send me the link?
Is that L21 version Indian variant?
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Sonny1732 said:
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Click to expand...
Click to collapse
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
mrmazak said:
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
Click to expand...
Click to collapse
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Sonny1732 said:
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Click to expand...
Click to collapse
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
mrmazak said:
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
Click to expand...
Click to collapse
i dont mind at all resetting from fresh system how do i do that
Sonny1732 said:
i dont mind at all resetting from fresh system how do i do that
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
mrmazak said:
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
Sonny1732 said:
thank you, ill give it a try
Click to expand...
Click to collapse
i cant download the frp unlock.zip
Sonny1732 said:
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
i cant download the frp unlock.zip
Click to expand...
Click to collapse
Ok hold on
Should be this
https://mega.nz/#!nw0wAYoA!hYtf78s0AjwRCpPo_NQ2F4LYclngNBNurJNETypSNKQ
From @KingOfMezi
mrmazak said:
Ok hold on
Click to expand...
Click to collapse
i did the HuRUpdater_0.3.zip and now i can get to the just a sec screen after i select wifi during setup but now its stuck there