T95Z 3/32 INFECTED ROM V1.0
Introduction
Here is another Custom Rom I've made for the 3/32 T95Z Android Box. It is based of the Android TV OS 7.1.2, Custom Recovery (TWRP) is already included, has been debloated, etc, a few init.d tweaks added.
If you like this Rom and care to make a Donation, you can DONATE HERE.
Images
Installation Instructions
Flash through USB Burning Tools which can be downloaded from here.
A Video showing the procedure can be watched here.
Not the best video, but should be good enough for beginners to get a understanding of what to do.
Download
Full uncompressed Rom can be downloaded from here.
A Compressed version of this .img can be downloaded here.
Extract and then flash the .img through USB Burning Tool.
Both versions are the same, just one is compressed to save on Download Size. Just make sure if downloading the Compressed Zip, to extract to the .img file to Flash.
Special Notes:
When Netflix asks to upgrade to newer version or not, decline, otherwise it will upgrade to a version that is not Remote Friendly or one that won't open, I have tried to install Netflix from the Android TV Play Store, it installs, but it won't open, I need to look into it a bit further, so just stick with the version I have included for now.
Changelog
Code:
Current Changelog: -- V1.0
* Custom Recovery (TWRP) Pre-Installed
* Debloat Rom
* Change Boot Logo
* Change Wallpaper
* Snappy Ui Tweaks
* Brightness Tweak
* IPV4 Tweaks
* LMK Configuration Tweaks
* Journalism Tweaks
* ZipAlign Tweak
* RemountNoaTime Tweak
* Tweak Deadline
* SD Card Read Ahead Tweak
* Various other Tweaks, eg. Fixed Enter Key for External Keyboards.
* Removed Logging
Older changelogs:
Code:
Changelog: -- insert date
[note] -- insert note
[new] -- insert new - [link to commit if applicable]
[changed] -- insert changed - [link to commit if applicable]
[fixed] -- insert fixed. - [link to commit if applicable]
XDA:DevDB Information
[T95Z] INFECTED ROM, ROM for the Android Stick & Console Computers
Contributors
whiteak, Ricky Divjakovski
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Created 2018-07-22
Last Updated 2018-07-22
heh, nice, you should archive the IMG to a zip, it will be half size small
drakulaboy said:
heh, nice, you should archive the IMG to a zip, it will be half size small
Click to expand...
Click to collapse
Not a bad idea, thanks.
Is there AptoideTV here? https://mega.nz/#!bV0wUaRS!Ximb03962SmC-Feg8DNISagTvQOzZDaycwy4-ulbZqI
19800123 said:
Is there AptoideTV here? https://mega.nz/#!bV0wUaRS!Ximb03962SmC-Feg8DNISagTvQOzZDaycwy4-ulbZqI
Click to expand...
Click to collapse
I'm not sure what you're asking, the link you provided is AptoideTV by the looks of it?
This is awesome. I am downloading now. Thanks so much for your hard work on this guys. Any major bugs we should be aware of?
Do we need to use the burn tool at all or can we just drop the .img file onto a thumb and flash in TWRP?
Brusington said:
Do we need to use the burn tool at all or can we just drop the .img file onto a thumb and flash in TWRP?
Click to expand...
Click to collapse
I would use the Burn Tools, I haven't tried to flash this Rom .img through TWRP honestly, so couldn't tell you, if you want to try, let me know the result.
whiteak said:
I would use the Burn Tools, I haven't tried to flash this Rom .img through TWRP honestly, so couldn't tell you, if you want to try, let me know the result.
Click to expand...
Click to collapse
Well, I see what you mean now. Going through TWRP I get a failed message that says "size of image is larger than target device". I have a feeling there is a method I'm totally missing here. What route would you suggest? Also, thanks in advance ?
Brusington said:
Well, I see what you mean now. Going through TWRP I get a failed message that says "size of image is larger than target device". I have a feeling there is a method I'm totally missing here. What route would you suggest? Also, thanks in advance ?
Click to expand...
Click to collapse
The USB burning tool as per the instructions. Only method I have tried and verified myself, so stick with that.
Can you please tell me how to turn off this dang box LED on this ROM?
Will you make the rom for the 2/16gb version?
Thanks!
brhood9 said:
Can you please tell me how to turn off this dang box LED on this ROM?
Click to expand...
Click to collapse
For now, you won't be able to, as the LED was embedded into the old SunvellWin8 Launcher, You may be able to open the box up and disconnect it, not too sure though, I'll probably have a look at doing this myself.
antouaa said:
Will you make the rom for the 2/16gb version?
Thanks!
Click to expand...
Click to collapse
Maybe, not too sure yet, If I get ahold of the 2GB Stock Firmware for 1081, I could, but as I only have the 3gb Box, I can't really test.
whiteak said:
I'm not sure what you're asking, the link you provided is AptoideTV by the looks of it?
Click to expand...
Click to collapse
Another easy to use market
我是用谷哥翻譯的.翻譯不太好.所以我很少說話.Android TV Remote Control 這一個功能你的rom好像刪除了
19800123 said:
Where do you change it. Is there any modification? I just seem to delete the apk and install some apk. The mobile remote control remote control is also deleted. The modification is not modified. You should not modify it. You are the other home box sent to destroy.
Click to expand...
Click to collapse
Mate, there is a major communication error going on with your posts, I suggest using a different translator as I don't understand what you're saying.
19800123 said:
我是用谷哥翻譯的.翻譯不太好.所以我很少說話.Android TV Remote Control 這一個功能你的rom好像刪除了
Click to expand...
Click to collapse
Try the Cetus Play apk.
No good for me. USB burning tool halted and failed at 2%. I have the T95Z 3/32 version. Now it could be my USB cable which I saw was the case with other devices and it also doesn't seem to be a common issue as if right now. I'll pick up another cable this week and see.
Brusington said:
No good for me. USB burning tool halted and failed at 2%. I have the T95Z 3/32 version. Now it could be my USB cable which I saw was the case with other devices and it also doesn't seem to be a common issue as if right now. I'll pick up another cable this week and see.
Click to expand...
Click to collapse
Or it could be you have the LP Ram version maybe?
Related
We've updated a bit....
Download Link: [Here]
We now have a complimentary app on the app store for this A4D App.
What is A4D?
The goal of A4D is for us to move beyond just N1 make it an all in one flashing/upgrading/android utility. We just added a ROM library with MD5s. We are not going to be hosting the actual ROMs by themselves so if you report a dead link, they will be taken down (after a number of reports). You can also add your own ROMs as well into the library.
The ROM library will be supported by both Android and Desktop App. We are rewriting the Desktop apps so that we can do all 3 platforms in one, Linux, Windows, and Mac. You'll love the layout of the app. That's all we can say for now.
Oh one more thing. The android app won the best android app award at the Mobile in the Middle Hack-a-thon over the weekend in Chicago (on 3/6/2010).
I would like you guys to try out the app and tell us feedbacks. Also feel free to add your own ROMs to the Database and tell us how we can make the DB better. There a number of features we are trying to add as well. But with our full time jobs... things are going a little slower than we wanted. Sorry.
Requirements to run the app on Android: Amon_RA's recovery. That's what we tested it with.
Reserved
Reserved for Future Updates / Changelog
Can't wait to see if this is fool proof.
Add md5 check. Make it in this way: user have to enter/copy-past md5 hashsum from forum/site. Program calculates md5 of image and says image is good or bad. Also you can disable flashing with out this check. ;-)
good idea. Will do that. That will help with flashing screwed up downloads.
Hi
Thank you for sharing the application.
Does it flash the radio too? I mean CyanogenMod has two files a radio ROM and a CyanogenMod ROM. Does it flash both of them to the phone?
Thanks.
Radio flash is in there we took it out. May do so in the next release but radio flashing is dangerous (can brick phones) so...
Hey Lwin,
Nice concept man, this is gonna prove very handy for many peeps.
You've come up trumps again
So, this is a desktop application?
Does it flash ROM's from your desktop or copy them over and just run the commands on the phone for you?
I ask, as I'm having some problems flashing now, based round a slightly faulty Micro SD card. Does it store backups on the phone or on your desktop PC?
This program is written so you don't have to do command line commands. Everything else remains the same. If you are doing a Nand backup, it goes where it used to go.
I would recommend fixing your "slightly faulty Micro SD card" by getting a new card.
nice app for those that aren't familiar with cmd or jus pure...lazy lol
maybe the screens should be bigger as quite hard to see clearly whats available.
Pure Genius...
seraph1024 said:
Here is the GUI tool for unlocking, updating, restoring, flashing of the N1 (and in theory should work on all HTC androids).
Try it out and see if it is useful. The tool is made to help for people with very basic skills since the tool at this stage is a wrapper for the shell commands at this point.
Again, as usual, we take no responsibility for loss of sleep, loss of phone or screw ups on our side (due to app) or on your side (due to lack of ability to follow instructions).
I wish to make it more simple. We welcome feed backs.
Seraph1024 - ShadowPyro
Download Link: [Here]
Click to expand...
Click to collapse
Hey Seraph, This is getting better and better everyday.. How is your windows and android port.. Oh and don't forget there little buddy, I need you on my Mobility Team when we arrive to the scene.. Android and Audi... Almost there....
Edit: Okay, can't run on Mac, of course will in VMware, can you please make this mac native too... It would be great as per what MooMoo said, for all who are lazy...
shadowpyro said:
This program is written so you don't have to do command line commands. Everything else remains the same.
Click to expand...
Click to collapse
But I don't use command line now. I didn't realise anyone did. Do you not just boot into RA Recovery and flash from there?
shadowpyro said:
I would recommend fixing your "slightly faulty Micro SD card" by getting a new card.
Click to expand...
Click to collapse
Thanks, I didn't ask for advice.
GodDriven said:
Hey Seraph, This is getting better and better everyday.. How is your windows and android port.. Oh and don't forget there little buddy, I need you on my Mobility Team when we arrive to the scene.. Android and Audi... Almost there....
Edit: Okay, can't run on Mac, of course will in VMware, can you please make this mac native too... It would be great as per what MooMoo said, for all who are lazy...
Click to expand...
Click to collapse
There will be a mac port sometime this week. I can most likely port to linux too but if you know linux and if you have to use wrapper, you have an issue
install issues
I tried to install it but got a system update required....
extracted the sdk to the folder C:\android-sdk-windows
extracted android4dummies and clicked setup
I get a pop up with the following:
unable to install or run the application. the application requires that system assembly system.data, entry version 3.5.0.0 be installed in the global system cache.....???
What do I do now?
Sounds like the app uses .NET framework 3.5.
So goto microsoft website an get 3.5 .Net Framework.
pwvandeursen said:
I tried to install it but got a system update required....
extracted the sdk to the folder C:\android-sdk-windows
extracted android4dummies and clicked setup
I get a pop up with the following:
unable to install or run the application. the application requires that system assembly system.data, entry version 3.5.0.0 be installed in the global system cache.....???
What do I do now?
Click to expand...
Click to collapse
You do need .Net 3.5. It should have asked you, if not installed that as a prerequisite.
I went to MS and downloaded the .net 3.5 installed it (apparently it was already on my pc, so instead of installing I tried to repair it. no success....
pwvandeursen said:
I went to MS and downloaded the .net 3.5 installed it (apparently it was already on my pc, so instead of installing I tried to repair it. no success....
Click to expand...
Click to collapse
Can you send us a screenshot.
Do not unzip into C:\android-sdk-windows. App will install SDK or search for the SDK there.
Unzip on your desktop or temp and install from there.
just to be clear, I unzipped adroid sdk and placed in the mentioned location. the android4dummies is extracted on the desktop and executed from there..
so should I remove the SDK and retry?
This thread is for development updates, and an eventual release of testing candidates for the future of dual booting CM12 android roms on the Amazon Fire TV. At this time I am not planing on supporting the Fire TV stick since my development platform is based off USB3 booting.
There currently isn't even a stable branch in CM12 upstream so things are quite tricky right now.
I may eventually setup public nightlies once the core is stable.
IN PROGRESS FORM HERE: https://t.co/TXp9z7htDx
The goals for development are in this order:
Wifi [working]
Bluetooth [crashing]
Stable core [random resets possibly storage related]
Audio [possibly needs hacking to default to hdmi]
Recovery system [rom boots using the recovery partition currently]
Hardware Acceleration [untested]
Android TV addons [require stable core]
USB Formating and install app [apparently not everyone knows what gparted is]
Modified version of Rbox's bootloader [I'd like to add recovery to the loader then have stock and custom boot options]
Also, if you want to be ready for possible nightly testing, I highly recommend going to walmart and buying one of the playstation USB3 hubs. It's about $20 but allows you to plug in a USB3 drive and keyboard and mouse until bluetooth is working.
SETTING UP USB BOOTING:
Code:
#include <std_disclaimer.h>
/* * Your warranty is now void. *
* I am not responsible for bricked devices, dead USB drives,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in these files
* before flashing them! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. */
PART ONE [Preparing the drive]:
This process will eventually be streamlined but for now I'll explain the process and how it relates to testing builds during development. Since the Fire TV only has an 8gb flash chip and has no hardware recovery trigger, it is quite the unforgiving device to develop on. The current boot method for my CM12 builds involves flashing over the recovery partition and using it as a sort of dualboot partition. The modified recovery partition then searches for ext4 partitions on and external (USB3 preferred) flash drive. Currently each build generates its own boot image to be flashed over recovery, but I'm currently in the process of exploring the possibility of following Rbox's method of loading a boot image from a system folder instead making only one flash to the actual device necessary going forward.
For USB3 booting during the development process I highly recommend using a USB3 hub for a keyboard and mouse while bluetooth pairing and control mapping is being worked on. I also recommend a USB3 drive.
1) Turn on a Linux machine or boot a Live CD
2) Open Gparted
3) Delete any partitions on the usb drive
4) Create three ext4 partitions, the first partion is system and should be about 1GB, the THIRD partition is cache, and should be about 768mb with 0mb following, you should then have the middle portion empty in the display, in this SECOND partition make your data partition fill the rest of the space.
PART TWO [Preparing the bootloader]:
WARNING this process currently involves replacing your recovery partition, remember kids dd and root is like holding a grenade, make sure you don't throw it at something you care about.
Also, if you are testing a build and it does not load using the previous bootloader, try flashing the latest one from the nightlies (and vise versa) as I am still in the process of stream lining the boot process as far as what should take place before system bring up on our device. If a different boot image loads the system with noticeably more stability let me know asap so I can track the causes of my current issues.
Code:
adb connect <STOCK FIRE TV IP>
adb push boot-<DATE>.img /sdcard
adb shell
cd /sdcard
su
dd if=boot-<DATE>.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Next I recommend side loading this apk to make rebooting into USB boot easier.
The three most recent "boot" images have been added to the downloads section, remember these should be flashed to recovery. Although they would work in boot, that would disable Rbox's loader and prevent you from loading stock OS.
PART THREE [Playing with instability]:
Great so now you have a USB3 booting image flashed to your recovery partition and you have an empty flash drive. This is where the tinkering begins. In the download section you will find a .tar.gz archive with a somewhat booting system with the aforementioned issues. Inside this archive is a system.img file which you will use dd to flash to the first partition of the flash drive you formated. After the system image is flashed you can plug your flash drive into your hub and reboot into recovery. Things will be great, wifi will show up and if you're quick enough you can complete setup and make it to the launcher. (the issue I'm currently working on is an odd timed reset that may be kernel or storage related oddly if you make it to the launcher and don't touch anything, it takes longer to reset)
If you made it this far, welcome to development. You can help by "kanging" (replacing system apk's and files with other versions to find more stable matches, or remove apks until things don't die then report back to me) Also if you make it to this point go ahead and fill out the form I mentioned earlier. Eventually any hotfix builds I do between nightly builds will be accessible to those users to play with.
Overhauling the boot system next and working on the reset debugging.
XDA:DevDB Information
TechVendetta ROM Development, ROM for the Amazon Fire TV
Contributors
TechVendetta, rbox
Source Code: https://github.com/TechV/android_device_amazon_bueller
ROM OS Version: 5.0.x Lollipop
Based On: CyanogenMod
Version Information
Status: Testing
Created 2015-01-29
Last Updated 2015-01-29
Reserved
UPDATE: I'm pretty much settled in to my new job/home now so I'm going to resume this project shortly. The first order of business is to see what sort of driver improvements we got from Amazon and whether their modifications help resolve the issues I was having. I only have the original FireTV so I'll be only testing on that. Not sure if the new one has an unlocked bootloader or recovery system so that will be up to whichever brave soul wants to test that. Hopefully tomorrow I can resync my repos and get a look at whats changed.
Reserved
Thanks for the update! Looking forward to seeing how this progresses.
Thanks for your work!
It would be nice run a CM12 build in Fire TV
So far the main system seems promising, I feel like the reset issue, which is the primary major roadblock is either in the kernel, or in the storage management/selinux services. Selinux should be disabled in this build so I'm looking into the other two options right now.
TechVendetta said:
So far the main system seems promising, I feel like the reset issue, which is the primary major roadblock is either in the kernel, or in the storage management/selinux services. Selinux should be disabled in this build so I'm looking into the other two options right now.
Click to expand...
Click to collapse
Thank you for keeping us updated!
[email protected] said:
Thank you for keeping us updated!
Click to expand...
Click to collapse
I'll link this here for now, while I finish looking into the logs for bluetooth/wifi/audio before uploading a rough copy here. I think I'm going to use the individuals who filled out the form to test the installer and recovery apps I'll be doing after fixing the above three things.
:victory:| TEASERS |:victory:
TechVendetta said:
I'll link this here for now, while I finish looking into the logs for bluetooth/wifi/audio before uploading a rough copy here. I think I'm going to use the individuals who filled out the form to test the installer and recovery apps I'll be doing after fixing the above three things.
:victory:| TEASERS |:victory:
Click to expand...
Click to collapse
Hey,
i've got one question for the installation:
you use the recovery as boot partition (because you dont want to mess with the actual boot partition where the bootmenu is).
is there a reason we cant use rbox's bootmenu, add another entry "usb boot" which will boot from /system/boot/usbboot.img ?
Or is the only reason that this just hasnt been added by rbox so we have to use another way?
I think this would be the most brick safe version and shouldnt be a big problem for rbox to implement....
Chris
[edit]
i'm really looking forward to this
aHcVolle said:
Hey,
i've got one question for the installation:
you use the recovery as boot partition (because you dont want to mess with the actual boot partition where the bootmenu is).
is there a reason we cant use rbox's bootmenu, add another entry "usb boot" which will boot from /system/boot/usbboot.img ?
Or is the only reason that this just hasnt been added by rbox so we have to use another way?
I think this would be the most brick safe version and shouldnt be a big problem for rbox to implement....
Chris
[edit]
i'm really looking forward to this
Click to expand...
Click to collapse
Thats one of the goals I put up there, just unlike rboxs current loader I know a way to make it remote controlled. ;D I started a bit on it. The "friendly user release" will have a root installer app that will handle multiboot, formating flash drives, recovery options, updates etc.
Really looking forward to a CM12 Android TV ROM. It would be nice to know that Amazon would not be able to kill a rooted Fire TV when this becomes reality. Peace of Mind regarding the Fire TV would be Priceless!
Xposed too http://forum.xda-developers.com/showthread.php?t=3030118
hhairplane said:
Xposed too http://forum.xda-developers.com/showthread.php?t=3030118
Click to expand...
Click to collapse
I'm a big fan of exposed, I'll have to add that to my testing list. I get a bit more free time tonight so I'll be getting back to looking at WiFi and Bluetooth and the installer. I still have two possible routes for both installing and updating i have to consider.
Sent from my LG-VM670 using XDA Free mobile app
TechVendetta said:
I'll link this here for now, while I finish looking into the logs for bluetooth/wifi/audio before uploading a rough copy here. I think I'm going to use the individuals who filled out the form to test the installer and recovery apps I'll be doing after fixing the above three things.
:victory:| TEASERS |:victory:
Click to expand...
Click to collapse
Any luck with the video acceleration, eg for Kodi or others such as Netflix, etc? How about hdmi audio?
Thanks for the update!
Video acceleration appears to be working, haven't got to audio. Had a death in the family this morning so i haven't had time to test my latest build.
Sent from my LG-VM670 using XDA Free mobile app
Sorry to hear that, Family is first! Although, maybe working on this will help take your mind away from that. Feel better!
TechVendetta said:
Video acceleration appears to be working, haven't got to audio. Had a death in the family this morning so i haven't had time to test my latest build.
Sent from my LG-VM670 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry to hear that.
I recently installed CM 12 on a 2012 kfhd and wow!--it really brought that device to life! Performance/OC options are built right into the OS and another Dev made a custom kernel to oc to 1.7 ghz. But I have limited experience with CM and Android TV. Can we expect a similar UI and performance options with this? Or is it different for the set top boxes?
BTW--I think it's really great you're doing this. Lots of people are excited and it's very appreciated!!!
KLit75 said:
I recently installed CM 12 on a 2012 kfhd and wow!--it really brought that device to life! Performance/OC options are built right into the OS and another Dev made a custom kernel to oc to 1.7 ghz. But I have limited experience with CM and Android TV. Can we expect a similar UI and performance options with this? Or is it different for the set top boxes?
BTW--I think it's really great you're doing this. Lots of people are excited and it's very appreciated!!!
Click to expand...
Click to collapse
I can overclock the kernel but I'm not sure if it will be necessary yet. As for the features, CM12 doesn't even have a "stable" build yet. (they call them M builds now) They are still porting customizations like that in. That rom may use some stuff pulled in by the dev from other projects like paranoid, aokp etc. I'm listening to what people are asking for and I'll be taking it into consideration once I get to tweaking release candidates.
TechVendetta said:
I can overclock the kernel but I'm not sure if it will be necessary yet. As for the features, CM12 doesn't even have a "stable" build yet. (they call them M builds now) They are still porting customizations like that in. That rom may use some stuff pulled in by the dev from other projects like paranoid, aokp etc. I'm listening to what people are asking for and I'll be taking it into consideration once I get to tweaking release candidates.
Click to expand...
Click to collapse
Sounds great. Thinking now...an OC kernel probably isn't necessary since it's already real fast. But this rom I have works well on a relatively low end/older device. So I'm super excited about your project. Thanks again!
Mysterious Magic (G Watch)
The First Custom G Watch ROM Based on the Android 5.1.1 (LDZ22D) OTA
Prerequisites:
Unlocked Bootloader (fastboot oem unlock)
ADB Debugging Enabled (Settings > About > Tap on build number 7 times > Swipe back > Developer Options > Enable ADB Debugging)
Drivers Installed (Windows)
Features:
Rooted out-of-the-gate (su, busybox)
Init.d support built in (/system/etc/init.d)
Improved transitions
Improved speed (slight overclock)
Improved battery life
Increased vibration
Forced GPU rendering
Easy to use installer (Windows, Linux, OSX)
Hotplugging of all 4 cores, as needed
Special Thanks:
invisiblek - For his wonderful custom kernel work!
okibi, arter97, Tomsgt, nagasgura, PlayfulGod, WindyCityRockr, and all other community developers - For their time, effort, and inspiration, in making this watch run faster, better, and even smoother!
All of the community members, watch owners, and rom flashers - Without my amazing users, and the help of this community, none of this would be possible, or even exist!
Donations:
If you happen to like my ROM and find yourself wishing to donate, you can do so by pressing the "Donate to Me" button below my username on the left side of the screen. I spend my free time developing my contributions to the community, and every penny is greatly appreciated!
Changelog:
Version 1.0 r2 (7/12/2015) :
- Removed vibration intensity from the tweaks and added it to it's own seperate file, for end user configuration.
- Removed governor and frequency settings from tweaks and added it to it's own seperate file, for end user configuration.
- Changed the default governor from ondemand to smartmax, to accomodate the kernel included with this rom.
For the best results, refrain from changing the default governor, unless you plan on pairing this rom with a different kernel other than invisiblek's (included).
- Added the ability to change dpi settings.
- Added the ability to enable a specific number of cores (when not using the included kernel).
- Fixed adb, fastboot issues some users were having.
- Major revisions to the installer!
Version 1.0 (7/5/2015) :
- Initial release.
Downloads:
Version 1.0 r2 (md5: 1c2652a3607a53d889c664eec72a37f2)
Mirror 1
Mirror 2
F.A.Q
How do i use the installer?
Extract the archive.
Enter the "Installer" folder.
Enter the folder of the platform you're using (Windows, Linux, or OSX).
Run the installer and follow the on-screen instructions.
Linux and OSX scripts may need the proper permissions in order to run.
Please note: First boot will take some time, and you'll need to re-pair your watch and phone.
How do I edit and install custom settings?
Enter the "Settings" folder.
Open the settings file with the text editor of your choosing.
Make changes to the settings file.
Save the settings file.
Run the installer, select Install Settings, and follow the on-screen instructions.
Questions? Comments? Concerns?
Leave all questions, comments, and concerns below, and I'll be sure to reply as fast as possible!
installer doesnt work
ker2gsr said:
installer doesnt work
Click to expand...
Click to collapse
Which version? Can you screenshot the specific errors?
Sent from my SM-G925P using XDA Free mobile app
MysteriousSparrow said:
Which version? Can you screenshot the specific errors?
Sent from my SM-G925P using XDA Free mobile app
Click to expand...
Click to collapse
that info might help lol yes i was using the wimdows installer im using windows 8 x64 the installer detected my device but when i went to do a reboot it said command anniciated but device didnt reboot into fastboot it went through all format steps and said succesfully flashed rom but device never rebooted to format on flashboot sorry no screen shot i flashed manually
ker2gsr said:
that info might help lol yes i was using the wimdows installer im using windows 8 x64 the installer detected my device but when i went to do a reboot it said command anniciated but device didnt reboot into fastboot it went through all format steps and said succesfully flashed rom but device never rebooted to format on flashboot sorry no screen shot i flashed manually
Click to expand...
Click to collapse
After looking into it, it seems I added an extra unneeded character to the script. I'm reuploading the correct version now, and I'll replace the download link accordingly! Sorry about that!
The fixed version is now uploaded. Give that a try and let me know!
Just installed with windows 10 and installer worked with no problems. Will boot into mint and try installer and report back.
dude1981 said:
Just installed with windows 10 and installer worked with no problems. Will boot into mint and try installer and report back.
Click to expand...
Click to collapse
Thanks! Let me know!
MysteriousSparrow said:
Thanks! Let me know!
Click to expand...
Click to collapse
Installer worked fine on Linux Mint. Will test on watch for a couple days and report back. What kernel is it running?
installed on windows 8 no issues...waiting for sync to test this bad boy out
thanks dev
dude1981 said:
Just installed with windows 10 and installer worked with no problems. Will boot into mint and try installer and report back.
Click to expand...
Click to collapse
dude1981 said:
Installer worked fine on Linux Mint. Will test on watch for a couple days and report back. What kernel is it running?
Click to expand...
Click to collapse
invisiblek's dory kernel
Thanks for the feedback, good to hear the installers are in working order now.
Will download when I get home. Can't wait to try this out...
goast said:
installed on windows 8 no issues...waiting for sync to test this bad boy out
thanks dev
Click to expand...
Click to collapse
Good to hear! Thanks for the feedback!
Report back and let me know what you think!
Ralphyralph said:
Will download when I get home. Can't wait to try this out...
Click to expand...
Click to collapse
Can't wait to hear what you think!
rom working great so far i had already installed manually so i didnt test again for you but others seem to have no issue now great work watch feels more snappier and responsive
ker2gsr said:
rom working great so far i had already installed manually so i didnt test again for you but others seem to have no issue now great work watch feels more snappier and responsive
Click to expand...
Click to collapse
Good to hear! Let me know if you have any concerns or questions in the future, regarding the rom.
Sent from my SM-G925P using XDA Free mobile app
upload
View attachment 3392477 Ok what am I doing wrong?
Yeah,you heard it right!
The long awaited feature,ability to map keys for games that are originally developed for touchscreen enabled devices are coming to RemixOs.
The chinese version of RemixOs has a new version (2.0.401) dated 27th June 2016,which claims to support keymapping.
You can check the changelog at https://bbs.jide.com/forum.php?mod=viewthread&tid=7351
I wanted to give it a try.but the download was stucked due to the low bandwith offered by server,unfortunately.
If you are brave enough to take a early look,or can't wait for the global release. here are the download links.
1) http://pan.baidu.com/s/1bpibhZT
Code: gbku
2) https://yunpan.cn/OcRUtwhPNKenuX
Code: 938d
PS: Those files are hosted in chinese servers,so the bandwith is not super high. You're on your own,and ask google translate for help
Thisu said:
Yeah,you heard it right!
The long awaited feature,ability to map keys for games that are originally developed for touchscreen enabled devices are coming to RemixOs.
The chinese version of RemixOs has a new version (2.0.401) dated 27th June 2016,which claims to support keymapping.
You can check the changelog at https://bbs.jide.com/forum.php?mod=viewthread&tid=7351
I wanted to give it a try.but the download was stucked due to the low bandwith offered by server,unfortunately.
If you are brave enough to take a early look,or can't wait for the global release. here are the download links.
1) http://pan.baidu.com/s/1bpibhZT
Code: gbku
2) https://yunpan.cn/OcRUtwhPNKenuX
Code: 938d
PS: Those files are hosted in chinese servers,so the bandwith is not super high. You're on your own,and ask google translate for help
Click to expand...
Click to collapse
use the baidu link . download speed is ok
enter the code :gbku in the box before 提取文件. press enter.
click the file Remix OS PC版(64位). then put a tick on the box for the zip file and md5 file . now click on 下载 to download.
if you want to use alt+f1 , you need to go to setting , then experimental , you can enable alt+f1 there .
you need this to enable google play store
if you want root just replace the su file under system/xbin
tested working in virtualbox and harddisk
Ok, very nice and all but...will it support my nvidia card with the official nvidia driver?
or29544 said:
Ok, very nice and all but...will it support my nvidia card with the official nvidia driver?
Click to expand...
Click to collapse
it work fine on gtx 750 ti. there is only the open source driver no official nvidia driver.
I thought the next update would be 3.0......
The forum link isn't opening.. can u copy th changelog here?
modaifallah said:
The forum link isn't opening.. can u copy th changelog here?
Click to expand...
Click to collapse
Google Translate version of this page - https://bbs.jide.com/forum.php?mod=viewthread&tid=7351
Remix OS PC version added a keyboard mapping is user long-awaited things, a lot of people pretending Remix OS PC version of the original intention is to play the game, because they can not stand the card slow performance and poor compatibility simulator.
Last week, Remix OS PC version beta version added a keyboard mapping function to obtain beta users, no longer afraid of playing the game is not compatible.
Yes, today's main event is the keyboard mapping update was added, and now only for "vanity" and "human resource" adaptation keyboard mapping, follow-up will add more and more optimized game adaptation.
Upgrade:
You can check the OTA update system update
Download the full amount of the package
Baidu network disk || Click here to visit
the extraction code: gbku
360 cloud disk || Click to Visit
extraction code: 938d
Detailed update log:
new function:
Added "Apply recommendation", it recommended more suitable Remix OS applications
New image output, support output HDMI, DP and VGA interfaces, etc.
New settings - restore factory settings function
Add a button to switch your phone browser / computer mode functions
Added latest official recommended wallpaper
Latest update Remix OS boot animation
New low battery alerts
Optimize video playback, video playback support more formats
New gaming keyboard mapping support, recommend games to "vanity" and "human resource" can be installed in the application of Recommendation
Bug fix:
Enhance the stability of the system, the use of traditional mechanical hard disk, the system will be more fluent
Improve application compatibility, support for more applications running on the x86 platform, such as: Youku / Taobao / JX / Implosion / Yahoo Mail
Increased portion laptop touchpad right support
Improve Wi-Fi instability, adding support for more wireless network card, including Realtek / Broadcom / MediaTek
Optimization Nvidia graphics adapter problem
Optimization of temperature control notebook, laptop or tablet according to the temperature control system to prevent system crashes
When optimizing hard disk partition read, repair hard disk partition to mount, resulting in system issues Caton
Repair in some graphics cards cause the taskbar can display problems
Progress is inseparable from the system for your feedback, in order to better optimize Remix OS PC version, please stop for a moment, fill in the following three questionnaire to help us do a better Remix OS PC.
Remix OS PC version of the keyboard mapping gathering feedback || Click to Visit
Remix OS PC version of the perfect run hardware collection || Click to Visit
Applications Recommended || Click to Visit
Regnas said:
I thought the next update would be 3.0......
Click to expand...
Click to collapse
There're few bugs that stop Android-x86 6.0 from daily use. For example,Google play services always crash on Intel Gen8+ GPUs,which is not fixed yet.
But the devs at Jide are actively contributing to Android-x86 6.0 and you'll be able to see the results in near future. For instance,the issue of Time being reset in Windows is fixed
in the latest commit, Check the marshmallow-x86 branch at https://github.com/android-x86-mirror
Hmm...seems like a solid release. I will wait for the official announcement and update though. If it fixes my nvidia/wifi/sound issues I might actually start using this
Regnas said:
I thought the next update would be 3.0......
Click to expand...
Click to collapse
I think there is no remix os 3.0 for PC(x86) :crying: :crying: :crying: :crying:
I downloaded and installed it. My impression :
1 Locked DOWN, no more root command line
2 No Play Store option
3 Does include keymapping
4 Stock file manager can no longer read the partition on which Remix OS is installed
5 Maybe a little more quick because of changes to disk partition access
This may be because it is currently for Chinese users, hopefully there will be more flexibility with the release
EDIT 2016/07/01: After solving problems of getting into root command line, was able to deactivate jide app policy and then went on to install nova launcher, etc. Then using help from @HypoTurtle I was able to do systemless root. Everything now operating well. I will continue testing this 2.0.401 over the next few days for stability.
Summary:
1 No longer locked down
2 Play Store is activated
3 keymapping confirmed
4 Solid Explorer can read all disk partitions by using Stickmount
5 So far seems quicker than 2.0.205
Sent from my on Z00A using XDA Labs
Latest version is dated 29 June 2016..
For root , you need to replace the su file at system/xbin.
For play store option you need to got to setting , click on experimental ,on the alt+f1 option . You can active play store option .
Sent from my GT-N7105 using XDA-Developers mobile app
have anyone a working link/mirror to the new beta?
scanja500 said:
have anyone a working link/mirror to the new beta?
Click to expand...
Click to collapse
I have already posted this in two different threads, but here is a faster mirror, if anyone wishes to download.
https://mega.nz/#!9lkTWDiI!as99QTFGw2UYkFkHQWBVCX-pKpxkT7McLs27t-wfVHM
pengkoh1 said:
Latest version is dated 29 June 2016..
For root , you need to replace the su file at system/xbin.
For play store option you need to got to setting , click on experimental ,on the alt+f1 option . You can active play store option .
Click to expand...
Click to collapse
Thanks for explaining the experimental settings.
Was able to activate the Play Store
Pardon the noob question: where do I get the si file to replace the stock one?
Sent from my on Z00A using XDA Labs
lollyjay said:
Thanks for explaining the experimental settings.
Was able to activate the Play Store
Pardon the noob question: where do I get the si file to replace the stock one?
Sent from my on Z00A using XDA Labs
Click to expand...
Click to collapse
http://forum.xda-developers.com/remix/remix-os/remix-os-installation-rooting-t3293769
I used the remixroot.zip from here. I choose to install remix os in read write mode thus I can replaced the su file at system/xbin directly.
You have to follow the method describe in that thread if you install remix os in read only mode
Sent from my GT-N7105 using XDA-Developers mobile app
pengkoh1 said:
http://forum.xda-developers.com/remix/remix-os/remix-os-installation-rooting-t3293769
I used the remixroot.zip from here. I choose to install remix os in read write mode thus I can replaced the su file at system/xbin directly.
You have to follow the method describe in that thread if you install remix os in read only mode
Click to expand...
Click to collapse
Thanks. I installed Remix on a Windows computer so I cannot use Ubuntu method. Also I used the Remix installation tool so everything is stock install. Guess I will have to wait for a systemless root. @HypoTurtle are you onto this yet? (lol)
lollyjay said:
Thanks. I installed Remix on a Windows computer so I cannot use Ubuntu method. Also I used the Remix installation tool so everything is stock install. Guess I will have to wait for a systemless root. @HypoTurtle are you onto this yet? (lol)
Click to expand...
Click to collapse
If someone can post the ramdisk I'll compare to the previous version but regardless the current systemless root su/ramdisk.img should work fine; unless it's drastically different.
HypoTurtle said:
If someone can post the ramdisk I'll compare to the previous version but regardless the current systemless root su/ramdisk.img should work fine; unless it's drastically different.
Click to expand...
Click to collapse
I thought so too. But when I substitute the ramdisk.img I get to the RemixOS splashscreen and never boots further
lollyjay said:
I thought so too. But when I substitute the ramdisk.img I get to the RemixOS splashscreen and never boots further
Click to expand...
Click to collapse
In that case attach the ramdisk.img to a post here and I'll take a look.
edit. @lollyjay on your edit above -- you shouldn't need stickmount... check if the partitions are mounted to /mnt/media_rw/hdd*
Hello guys!
I'm starting this thread as I managed to install win10 on my X90L (Android) YogaBook
It was not easy to find a way to fix the ACPI error but it is possible!
Will update this post in a few hours with a guide on how to do it yourself.
UPDATE: link to the guide -> poz1.com/windows-on-android-lenovo-yogabook/
PLEASE NOTE THAT IF YOU CONTINUE YOU WILL END UP WITH A YOGABOOK WITHOUT INPUT DEVICES!!!
(EXTERNAL KEYBOARD WILL BE NEEDED) AND NO ANDROID INSTALL!!!
So far i got almost everything working except:
- Touchscreen
- Keyboard
- Webcam in the keyboard panel (the other one works fine)
- NFC
- Backlight Control (added 25/5/2018)
I'm getting very near to have the touch and the keyboard working though
P.s. In attach you find the outputs from 3DMark - IceStorm Extreme (default settings), would be much appreciated if someone with the real Win version shared its score
Any chance of posting you work to date. Got an X90F just crying out for Windows.
Broomfundel said:
Any chance of posting you work to date. Got an X90F just crying out for Windows.
Click to expand...
Click to collapse
I have added the link to the guide! If yo have any issues let me know but keep in mind that currently no input devices (touchscreen or keyboard) work!
Thanks for posting this. I am really so impressed. Will be trashing my X90F tomorrow. Just got to dig out a powered USB hub. Ill report back, and lets see what happens.
(Hopefully not a brick)
OK,
So far so good. I get to the amending of the of aml. But keep getting.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180508
Copyright (c) 2000 - 2018 Intel Corporation
iASL: Segmentation Fault
iASL: Terminating
To clarify the process. Decompile the DSTDroid.aml, then insert the OperationRegion (GNVS, SystemMemory, 0x7B3CF000, 0x0369)
Field (GNVS, AnyAcc, Lock, Preserve)
{ etc.. } section from the DSTDroid.dsl and use it to replace the equivalent section in the DSTWin.dsl in your files.
Then compile the DSTWin.dsl with the
iasli -ta DSDTWin.dsl
command.
This is how I am reading it, but have not managed to get it to work yet.
It decompiles with the two errors you mention, but wont recompile no matter how I try it.
I am using Notepadd++ so its not hidden characters.
Any thoughts, and thanks again for your efforts on this.
Broomfundel said:
OK,
So far so good. I get to the amending of the of aml. But keep getting.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180508
Copyright (c) 2000 - 2018 Intel Corporation
iASL: Segmentation Fault
iASL: Terminating
To clarify the process. Decompile the DSTDroid.aml, then insert the OperationRegion (GNVS, SystemMemory, 0x7B3CF000, 0x0369)
Field (GNVS, AnyAcc, Lock, Preserve)
{ etc.. } section from the DSTDroid.dsl and use it to replace the equivalent section in the DSTWin.dsl in your files.
Then compile the DSTWin.dsl with the
iasli -ta DSDTWin.dsl
command.
This is how I am reading it, but have not managed to get it to work yet.
It decompiles with the two errors you mention, but wont recompile no matter how I try it.
I am using Notepadd++ so its not hidden characters.
Any thoughts, and thanks again for your efforts on this.
Click to expand...
Click to collapse
Hello Broomfundel,
I never got that error, but it seems to be a problem of the ASL Compiler build not of your file.
I am using Mac so I have another build, if you want to post the file I can compile it for you .
Otherwise you can try an older release or to build the tool from source maybe?
Poz1 said:
Hello guys!
I'm starting this thread as I managed to install win10 on my X90L (Android) YogaBook
It was not easy to find a way to fix the ACPI error but it is possible!
Will update this post in a few hours with a guide on how to do it yourself.
UPDATE: link to the guide -> poz1.com/windows-on-android-lenovo-yogabook/
PLEASE NOTE THAT IF YOU CONTINUE YOU WILL END UP WITH A YOGABOOK WITHOUT INPUT DEVICES!!!
(EXTERNAL KEYBOARD WILL BE NEEDED) AND NO ANDROID INSTALL!!!
So far i got almost everything working except:
- Touchscreen
- Keyboard
- Webcam in the keyboard panel (the other one works fine)
- NFC
I'm getting very near to have the touch and the keyboard working though
Click to expand...
Click to collapse
Hi, i have the Lenovo Yoga Book Windows version, im crying to install Stock Android on it, can you PLZ write a guide about doing it, or at least if there is a way to install the kernelflinger.efi or the fastboot mode on YB windows it will be great.
to fix the whole bugs you faced, try to reinstall windows 10 using this methode https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Thanks
THE MAXIMUM POWER said:
Hi, i have the Lenovo Yoga Book Windows version, im crying to install Stock Android on it, can you PLZ write a guide about doing it, or at least if there is a way to install the kernelflinger.efi or the fastboot mode on YB windows it will be great.
to fix the whole bugs you faced, try to reinstall windows 10 using this methode https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Thanks
Click to expand...
Click to collapse
Hi,
KernelFlinger is opensource and come with an installer, it should be pretty simple to install it.
Right now I don't have my YogaBook as I am travelling but I can try in the next few days
OK, Older release worked, but I get a .hex file, your instructions talk about a new aml file. Do I use the .hex file or is there another option other than the -ta one that would create the aml.
BTW. I am enjoying this. So thanks again.
Broomfundel said:
OK, Older release worked, but I get a .hex file, your instructions talk about a new aml file. Do I use the .hex file or is there another option other than the -ta one that would create the aml.
BTW. I am enjoying this. So thanks again.
Click to expand...
Click to collapse
With the -ta option I get both the .hex and the .aml file but you can try -tc if it doesn't work. Maybe due to the different build
P.s. (for other people that may incur in this) If you don't get the output files check that you have as last line of the terminal
"Compilation complete. 0 Errors"
OK, I am getting 7 errors. My current theory is that the DSTDWin.dsl will only compile with the same version number of the compiler it was decompiled with. I have attached my DSDTDroid.dsl so you can have a go. At least it will prove I got things right up to that point. Might be worth posting the original DSTDWin.aml for me to try this end.
If we are lucky it might turn out that the patched DSTDWin.aml files are consistent across the same model devices.
So... It seems both pen mode and keyboard mode of holo keyboard won't work... Am I right?
It's sad that if they won't work even we install the drivers from the lenovo website
Poz1 said:
Hi,
KernelFlinger is opensource and come with an installer, it should be pretty simple to install it.
Right now I don't have my YogaBook as I am travelling but I can try in the next few days
Click to expand...
Click to collapse
can after installing Windows booting to kernelflinger? if you can make a thread about how can you install/reinstall kernelflinger will be amazing?
Thank you
Poz1 said:
Hello guys!
Click to expand...
Click to collapse
Have you tried with the ISO from this forum with the Windows injected drivers? Here https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
As Poz1 is obviously busy at the moment. Can anyone else get the DSTDWin.aml file for me to try and decode?
Thanks
Sorry guys I've been busy with university
Broomfundel said:
OK, I am getting 7 errors. My current theory is that the DSTDWin.dsl will only compile with the same version number of the compiler it was decompiled with. I have attached my DSDTDroid.dsl so you can have a go. At least it will prove I got things right up to that point. Might be worth posting the original DSTDWin.aml for me to try this end.
If we are lucky it might turn out that the patched DSTDWin.aml files are consistent across the same model devices.
Click to expand...
Click to collapse
There you go I'm also updating the files DSTDWin of my blog with one with some fixes Well they depend on the settings you use in your Bios (that's why Windows may not boot after install, it changes some parameters (the wait time of the bios and the default boot partition)). When you use the builtin one is the bios that "updates" it for you but for now we need to do it by hand If we are going to end with everything working we can release a patched "Win" bios and everything will be simpler
Riskypedia said:
So... It seems both pen mode and keyboard mode of holo keyboard won't work... Am I right?
It's sad that if they won't work even we install the drivers from the lenovo website
Click to expand...
Click to collapse
I know There something in the DSDT (the file that tells the os which and where your pc components are) that has to be fixed to make Windows see these parts correctly
THE MAXIMUM POWER said:
can after installing Windows booting to kernelflinger? if you can make a thread about how can you install/reinstall kernelflinger will be amazing?
Thank you
Click to expand...
Click to collapse
Didn't try Will do as soon as I have some free time :fingers-crossed:
Kinyapiplele said:
Have you tried with the ISO from this forum with the Windows injected drivers? Here https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Click to expand...
Click to collapse
Yep, but the problem is in the DSDT Thanks fot the input anyway
Poz1 said:
Sorry guys I've been busy with university
Click to expand...
Click to collapse
Don't worry, we all have real lives as well. I'm in the UK and we have a bank holiday on Monday. So this weekend, Ill get stuck in again.
Thanks for all your doing on this. You have already got further than anyone else who tried.
let me know if you have more problems
I have added a 3DMark test in the first post for those that are interested in how it performs
Poz1 said:
let me know if you have more problems
I have added a 3DMark test in the first post for those that are interested in how it performs
Click to expand...
Click to collapse
Just another Question, you as a Advance user, do you believe that we (yoga book Windows owners) can boot Android yb STOCK ROM ( i mean not the Android x86 based distros)?
Yes, but I think you would have to do the "reverse" DSDT injection (from win to android) as the official ROM has drivers for that components.
This means that, if you're lucky you would end up with our same problems (keyboard, pen and touch). If we don't fix that before
The problem with Android is that it is meant to be flashed on rom instead of being installed and this makes things more difficult.
It should be possible to flash the rom on an USB key, add grub and use it for DSDT injection like we do and see what happens.
Another problem is that the provided kernelflinger seems to have most of the security options enabled so 99% it will refuse to boot anyway.
Since it is opensource it should be possible to fix this anyway.
So yes, but it a loooong journey