To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Mi A2 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
The phone ships with a quick charge 2.0 charger. The phone supports 3.0 and also 4.0 for India markets. Mine is Malaysian so it's 3.0. With stock charger it takes 1 hour 20mins + to get fully charged. Not too bad. With a QC 3.0 charger (Using my mi max 2 charger) it takes about less than an hour to get fully charged based on estimates. Charges quite quickly to 70% so stock charger is actually fine.
I think it supports USB PD as well, I used my pixel 2xl charger and it showed that the phone is charging rapidly, will do another full test and post results!
Rueddi_ger said:
How can I find out which QuickCharge version my A2 supports? I own the global version.
Click to expand...
Click to collapse
If it's the global version, it should be QC3.0 . QC4.0 is only for India if I am not wrong.
Rueddi_ger said:
Oh that's sad. Is it worth buying a QC 4.0 charger anyway? Or is that wasted money?
Click to expand...
Click to collapse
I don't think QC 3.0 is that much slower compared to QC 4.0. It's not like Oppo's new charge system, now that's quick haha. QC 3.0 is fine. I am still using QC 2.0 and it's all good no issues with it.
Timmychin said:
The phone ships with a quick charge 2.0 charger.
Click to expand...
Click to collapse
I charged it in like 80 minutes with its charger but the charger doesnt say that it has quick charge
I was surprised
XDA_RealLifeReview said:
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Mi A2 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
Click to expand...
Click to collapse
Phone supports quick chargers from xiaomi only. I have tried 2 different qc 3.0 certified chargers and both get 1800mah to my A2. My charger from my old Mi5s plus works fine and gives 2400mah.
maitred said:
Phone supports quick chargers from xiaomi only. I have tried 2 different qc 3.0 certified chargers and both get 1800mah to my A2. My charger from my old Mi5s plus works fine and gives 2400mah.
Click to expand...
Click to collapse
I got the cheapest qc 3.0 from Amazon, tycipi or something like that. According to ampere app it is providing 2400 mah, it charges the phone quickly
I got the global version, so only QC3.0.
I have an Aukey PA-T8, 8 ports 5V 2.4A, 2 QC3.0 ports.
On 2.4A port, Ampere say 1800mA.
On QC3.0 port, Ampere say 2300mA.
Rueddi_ger said:
How can I find out which QuickCharge version my A2 supports? I own the global version.
Click to expand...
Click to collapse
If you own a Global Version, your device will only support QC 3.0. Only Indian Variants support QC 4.0
My A2 unit is behaving quite strange, first let me say that Ampere is not so reliable as a USB power monitoring device, which I have (this unit gets you also the voltage which is being supplied to the phone).
MY measurements (with supplied USB-C cable) are:
- Stock charger: 1,6A voltage 5V
- QC 3.0 charger: up to 2,4A voltage 6,5V
- QC 2.0 Charger (works with Asus Zenfone 2 and Galaxy S8 on quick) - sometimes ZERO - just shuts down after a minute
Other 2A 5V chargers often not more than 0,6A (depending on cable)
So, A2 is very sensitive with cables and charging electronics and probably cannot accept 9V.
Global version.
Sometimes the phone when plugged in charger shows "Charging slowly" and sometimes "Charging Rapidly", What's up with that?
QC 3.0 (smartphone ON)
Aukey PA-T9 QC 3.0 charger
AmazonBasics USB type C to USB A male 3.1 gen2 0.9m black cable
Plugable USBC-VAMETER v.2 usb type c voltage & amperage meter
Smartphone ON, screen OFF (turned on just for taking pics)
Charging time: about 1h 40m from about 18% to 100%
See attachments for more details.
QC 3.0 (smartphone OFF)
Aukey PA-T9 QC 3.0 charger
AmazonBasics USB type C to USB A male 3.1 gen2 0.9m black cable
Plugable USBC-VAMETER v.2 usb type c voltage & amperage meter
Smartphone OFF
Charging time: about 1h 30m from about 20% to 100%
See attachments for more details.
PD 3.0 (smartphone ON)
Aukey PA-Y8 PD 3.0 charger
Anker Powerline II USB-C to USB-C 2.0 90cm cable
Plugable USBC-VAMETER v.2 usb type c voltage & amperage meter
Smartphone ON, screen OFF (turned on just for taking pics)
Charging time: about 1h 40m from about 18% to 100%
See attachments for more details.
PD 3.0 (smartphone OFF)
Aukey PA-Y8 PD 3.0 charger
Anker Powerline II USB-C to USB-C 2.0 90cm cable
Plugable USBC-VAMETER v.2 usb type c voltage & amperage meter
Smartphone OFF
Charging time: about 1h 30m from about 18% to 100%
See attachments for more details.
tomsag said:
A2 [...] probably cannot accept 9V
Click to expand...
Click to collapse
With a Power Delivery 3.0 charger and smartphone off, it can surely be charged with a voltage of about 9V.
I don't know if it's possible also in other cases.
Is the QuickCharge 4.0 a software or a hardware feature in the Indian version? Just wondering if QC 4.0 can be "unlocked" in the global version through future software tweaks?
With the stock charger , it's charged after 3 hours it's normal ?
Candy_Pineapple said:
With the stock charger , it's charged after 3 hours it's normal ?
Click to expand...
Click to collapse
Absolutely no
Related
Are there any aftermarket chargers that will work like the oem Motorola Turbopower chargers?
Pretty much any USB-C charger will work. I've used an old USB power brick with a USB-B -> USB-C cable, I've used my Acer R13's USB-C 45W power brick, and I've used my Choetech 55W 6-port charging station with a USB-C -> USB-C cable. They all work.
If you're looking for something that works with the X4's Turbopower, that's basically just Qualcomm Quick Charge 2.0 under a different name. My charging station is QC 3.0, which works with QC 2.0 devices, which works with this Moto X4. It charges quite fast.
If all you're looking for is a product recommendation, I'd check out this: https://www.amazon.com/Anker-Charge-Type-C-Charger-PowerPort/dp/B01CJ90J6O
crazyates said:
Pretty much any USB-C charger will work. I've used an old USB power brick with a USB-B -> USB-C cable, I've used my Acer R13's USB-C 45W power brick, and I've used my Choetech 55W 6-port charging station with a USB-C -> USB-C cable. They all work.
If you're looking for something that works with the X4's Turbopower, that's basically just Qualcomm Quick Charge 2.0 under a different name. My charging station is QC 3.0, which works with QC 2.0 devices, which works with this Moto X4. It charges quite fast.
If all you're looking for is a product recommendation, I'd check out this: https://www.amazon.com/Anker-Charge-Type-C-Charger-PowerPort/dp/B01CJ90J6O
Click to expand...
Click to collapse
Think our X4 needs QC3.0 for turbo charging. I have several QC2.0 chargers left over from my last phone and they do not charge this device at full speed. Also I'm pretty sure the original Motorola charger that came with it is QC3.0 according to what I've seen. But I've just ordered my first after-market charger (a RAVPower car charger, model VC007003) and can report back when it arrives later this week.
Looks like QC3.0 is the ticket
Here are screenshots of the charging rates using both my old QC2.0 and new QC3.0 chargers. The new one activates the "TurboPower connected" toast message, which the old one did not, and charges at a much faster rate. Gonna check out some QC3.0 wall chargers in the near future now.
Yes.
Anything from Qualcomm's certified list.
The original charger is 5V, 3A (15 Watt). However, most Qualcomm QC 2.0 chargers from 1 or 2 years ago ran at 12V, not 5V for fast charging so they don't support the combination of 5V 3A. It's the same thing that happened with the Nexus 5X which technically didn't have Qualcomm QC either, despite having a Qualcomm CPU. Forget the branding on the charger since it is too unreliable, and just find yourself something that can support 5V, 3A.
Wireless charging station for Moto x4?
Anyone know of a wireless charging station that works on the Moto X4? Got my x4 from Project Fi back in October and now it won't charge with a standard usb c cable. The phone and usb plug gets hot.
I'm using Pleson Fast Charge stand and CHGeek Wireless Charging Patch. The charging patch is kind of unsightly but I don't care, it charges "Turbo" fast.
Uhmmm
SynbiosVyse said:
The original charger is 5V, 3A (15 Watt). However, most Qualcomm QC 2.0 chargers from 1 or 2 years ago ran at 12V, not 5V for fast charging so they don't support the combination of 5V 3A. It's the same thing that happened with the Nexus 5X which technically didn't have Qualcomm QC either, despite having a Qualcomm CPU. Forget the branding on the charger since it is too unreliable, and just find yourself something that can support 5V, 3A.
Click to expand...
Click to collapse
That may explain why my Nexus 5x charger can't charge this Moto x 4 (it takes forever to complete a charge) but technically it still works
I've gotten turbo speeds from several different Quickcharge3 chargers from Anker. As a side benefit, they also do a good job charging my wife's iPhone.
For me this cable and this wall adapter do the trick just fine.
When I say Quick Charge, I mean proper QC technology, not some "quick" or "fast" charging method unique to Huawei only.
The stock charger says [email protected] or [email protected] QC2 and 3 can do [email protected] However when I put the M5 onto my QC3 charger, it only draws [email protected] as tested with a cable with V/A reading.
Charger and cable had been tested to work at proper QC power with my ZTE Axon 7, drawing 18W and also a Moto G4 Turbo Charging.
The strange thing is, if there is some "special" Huawei only technology on the stock charger, it still charges my Axon 7 and G4 with "standard" QC3. Anyone has been successful charging their M5 on a standard QC2/3 charger?
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Michaelflat1 said:
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Click to expand...
Click to collapse
Tried it with screen on or off, and even with the M5 off, still 10W on a non stock QC3 charger.
Cable definitely works for quick charge because I used the same cable on the stock charger and it reads 18W, so it is not blocking anything.
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Obveron said:
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Click to expand...
Click to collapse
Yes, 2 lighting symbol means QCing. However it does not show on my non stock QC charger. My other QC-able devices does on both that charger and the Huawei stock one, strange.
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
This is what I use: http://amzn.eu/cLL0gg9
Cable shouldn't matter for QC and proven not to matter as I used the same random cable (and also the cable with the V/A meter) on this charger and the stock charger. It QC my M5 and Axon 7 on the stock charger but only QC my phone on the Aukey charger.
I have a USB C charger ordered, will see if that works better with the M5.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
I had since discovered that Huawei does not use QC standards but their own FCP for fast charge. Some QC chargers have that ability built in, but not all. Time to invest in more chargers I think.
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
alvinlwh said:
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
Click to expand...
Click to collapse
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
almaalma74 said:
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
Click to expand...
Click to collapse
There are many chargers that can QC and FCP at the same time, BUT very few that have 2 or more ports that can do them all at once (or at least FCP+QC on one and QC on the other), just one port and the other one at normal speed. There is a Tronsmart one with 5 ports but it is quite costly.
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
StephenMSmith said:
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
Click to expand...
Click to collapse
Not sure what the nexus comes with. However I had tried it with QC3 charger and a USB C PD charger and both just slow charges. Only Huawei original charger or SOME chargers with VoltIQ can fast charge the M5.
plugging in my USB tester proves that actually it takes a 9v 2a charge from original power adapter and cable. Whilst screen is on also.
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Ivanbarker said:
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Click to expand...
Click to collapse
I can confirm that you do not need the original cable for FCP charge. I used a USB 3.0 (blue plug) cable that works with QC3 for FCP and this is confirmed by a USB V/A meter.
I think Huawei has their own standard. Some of my QC 2 chargers work, some don't using the same cable.
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
StephenMSmith said:
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
Click to expand...
Click to collapse
Huawei FCP is [email protected]=18W or [email protected]=22.5W. Not sure which one our tablet uses, at work cannot check the actual charger. However when plugged into a QC2/3 charger, it charges at [email protected]=10W. Meaning it will be between 80% to 125% more time with a non FCP charger.
Having just picked up my M5 8.4, confirm my PD charger is (apparently) quick charging the device. It says fast charge on the lock screen and I've got the double lightning bolt in the status bar. Score!
Hi i read that redmi 5 plus support qc so i had aquired samsung quick charger.When plugged phone shows quick charging but when i mesure mA while charing with qc and with normal charger there is no big difference according mesuring software.So what is real truth about qc?
petric1 said:
Hi i read that redmi 5 plus support qc so i had aquired samsung quick charger.When plugged phone shows quick charging but when i mesure mA while charing with qc and with normal charger there is no big difference according mesuring software.So what is real truth about qc?
Click to expand...
Click to collapse
Redmi 5 Plus supports QC (3.0 to be exact, as it's Snapdragon 625). Apps measuring charge rate won't show you real current, it's only approximation.
I've tested my charger, which supports QC 3.0, my 5+ uses 9Volts at almost 2Amps (when charging from 15-20%). Measuring software won't show you voltage that you are using to charge so you may not see the difference. But doing quick math - 5V*2A=10W (standard charging brick) whereas QC charger will use 9V*2A=18W. That means you are charging with 80% more power.
Keep in mind that charging with QC will get your phone a bit warmer, so phone will start to throttle the current, meaning that you won't be charging from 0% to 100% at full 18W
Yes. It charges with 9v and 1,7 amp max. (9v is static, amp is variable, that means it has only QC 2.0 mode.)
Its way faster than standart charger. I have Tronsmart QC 3.0 charger. But you can go with QC 2.0 charger.
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
I think it's just Quick Charge 3.0. You should buy the 27W charger imo. But i could be wrong
I have it, it does quick charge but not charge turbo
Good I stopped by XDA before purchasing it.
It does say if you scroll down on its specs it's a QC4 charger, but I assumed the described output would be a sum of both USB ports working simultaneously.
Already posted about it some weeks ago.
https://forum.xda-developers.com/showpost.php?p=79530777&postcount=73
It's indeed just a QC 4.0 charger. Will only do 18W.
Hi, I have one. For it to work properly you have to have the cable of more than 30w.
Load much faster than the original that comes in the box. I did a quick test from 75% to 100% with the phone turned off and charged in 25min; so you can assume if it's fast or not.
WTF ; does this phone even do QC4 ... the Xiaomi offical charger is 3.0 and I bought a $68 dollars Belkin QC : 4.0+ offical as per reviews and it caps out at. 3470 : it NEVER has said fast or TURBO and it ofen Ampere reports 1800 mah ? Can anyone explain this in any way
Do you really have to post the same thing in every single charger related topic ?
Ataemonus said:
Do you really have to post the same thing in every single charger related topic ?
Click to expand...
Click to collapse
I couldn't find this :/
hardtheory said:
I have it, it does quick charge but not charge turbo
Click to expand...
Click to collapse
Thanks for info dude
I suspect that Turbo Charge only happens with the 27W factory charger.
Because my Hama QC4+ charger, certified by Qualcomm, charges definitely faster than the 18W charger found in the package, but does not say Charge Fast or even Charge Turbo.
twojastara-5 said:
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
Click to expand...
Click to collapse
Call me crazy but I think it will charge the device at 27W speed.
A lot of people don't seem to realize but the "Xiaomi Turbo Charger 27W" is actually QC3, not QC4+, and it does charge the device at 27W. If you find a QC4+ charger that supports 27W and up, you will still get 27W charging but you won't see "Charge Turbo" because it will use the better, newer charging standard.
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
lusp00ky said:
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
Click to expand...
Click to collapse
Yeah but it can only charge at standard QC3 speeds, aka 18W at max. 9V/2A like the original one does. But the original one can also do 12V/1.5A. So it does not "Turbo Charge".
Careful many poster here are confused. My BELKIN true QC4.0+ never ever charged over 3200mA and averaged out at under 2200mA. Posters who speak about things without testing their theories are really frustrating. Do yourself a favor don't believe this phone accepts QC4 or QC 4.0+ (at least not @July 2019) only QC 3.0 NON FAKE xiaomi 27w can do the 4600mA + it would seem. Turbo charging is required for extremely rapid charge times. Make sure you get OFFICIAL 20V 1.35A from Xiaomi for Turbo Charge sustained charge and under one hour 0--100%
I also purchased a QC 4.0+ Hama DC charger cause Xiaomi doesn't make a DC charger to my knowledge. Guess what ; 18w ish charging speeds .. no Fast or Turbo classification ...
XIAOMI Hoe do you call this phone a QC 4.0/4.0+ unit !!! Cause look close at the charger Turbo pictures they are all using the "Original QC 3.0 Xiaomi charger that we ALL should have got in the box. Instead many of us have wasted tonnes of money and time buying useless to us QC 4.0+ tech that doesn't work or WORSE fake chargers that don't do more than 18w !! By the time we we have ordered 3-4 different chargers trying to get it to work we have to order it on Ali or gearbest or Gearvita. Cause the company does make them after all!! Enjoy the brutal shipping fees and heavy wait times. Well we order this and that trying to get the darn thing to work. So annoyed right now
Hi, I got the original charger and this if it gives the turbocharged 27w charge, however the baseus charger charges the same as the one that comes in the box or with the wireless charge.
I made this short video: https://youtu.be/nFBoPxORzEg
https://forum.xda-developers.com/k20-pro/how-to/mi-9t-pro-30w-charger-experiment-t4003595
read this. Also tested with a mi9 that my fried had. same result.( Turbo charging up to 30W using the baseus charger)
Posted for those who end up here like me and read mixed info
I also have the Baseus charger mentioned above (BS-EU906), the variant with 2 usb A ports.
When I charge with the cable from my samsung galaxy tab S5e it charges with a bit over 4200mA 20w-21w.
But when I charge with my Baseus 2m 5a capable cable (CATSS-B0G), it never goes above 3400mA ~14w.
It still chargers fast, but it is not what was advertised. Both the cable and charger are rated for QC3.
Baseus GaN charger 65W + Baseus 5A cable reaches 5000mA in Ampere, which is assuming 5V (that's what Ampere is assuming), equals to 25W. The fact is voltage in QC is never stable, it's the factor that allows it to dynamically supply power based on various parameters: battery temp, device temp, battery capacity and so on. If you have a USB-C USB doctor (and it should be more accurate than any software based monitoring) you can watch yourself that both the voltage and current are alternating constantly.
This is the 100W Baseus deskop charger and I have two issues with it:
1. When two USB C ports are used, the power division is C1=65W and C2=30W. So C1 should still be more than capable enough to handle SFC 2.0 45W charging. But as you can see in the video, SFC 2.0 is not working when two USB C ports are used.
2. When I charge at SFC 2.0 and SFC 1.0 with the same charger, they both cap at 33W. I thought SFC 1.0 is just 25W? When I use the official 25W Samsung SFC 1.0 charger, it just caps off at 24W as expected.
Baseus support sucks big time so I'm having a problem reporting this to them.
kevindd992002 said:
This is the 100W Baseus deskop charger and I have two issues with it:
1. When two USB C ports are used, the power division is C1=65W and C2=30W. So C1 should still be more than capable enough to handle SFC 2.0 45W charging. But as you can see in the video, SFC 2.0 is not working when two USB C ports are used.
2. When I charge at SFC 2.0 and SFC 1.0 with the same charger, they both cap at 33W. I thought SFC 1.0 is just 25W? When I use the official 25W Samsung SFC 1.0 charger, it just caps off at 24W as expected.
Baseus support sucks big time so I'm having a problem reporting this to them.
Click to expand...
Click to collapse
Baseus GaN5 Pro 65 watt can charge at 50watt peak.
after 60 percent,watt same as samsung 25 watt charger.
But your measurement is input power to the charger and not output power to the phone. There's a bit of a difference because of power adapter efficiency. I don't know what is the difference between the Gan5 Pro 65W and this 100W adapter really.
BUMP! Anyone please?
This is normal for such a charger. I have a PZOZ version - 65W GaN 2xUSB C + 1xUSB A. SFC 2.0 works only with 1 device plugged in, if you plug another (it might be a 5W one) - this breaks the SFC. I can assume that this is coming from the controller and the device is actually not capable to support such scenario, even though the power is declared as 100W.
Hmmm, that's interesting. I thought the issue was isolated to BaseUS. Their support is really non-existent. They reply but it's like you're talking to a stupid person that does not understand the issue.
Aside from this issue, do you have any other issues when using both ports? As for me, when I charge my phone while my laptop is plugged in, it sometimes drops the wattage on the laptop device to just 19w. If the laptop is plugged in by itself, it goes up to 59w. Not sure what's going on here.
Are there any usb c car chargers that support sfc 2.0?
kevindd992002 said:
Hmmm, that's interesting. I thought the issue was isolated to BaseUS. Their support is really non-existent. They reply but it's like you're talking to a stupid person that does not understand the issue.
Aside from this issue, do you have any other issues when using both ports? As for me, when I charge my phone while my laptop is plugged in, it sometimes drops the wattage on the laptop device to just 19w. If the laptop is plugged in by itself, it goes up to 59w. Not sure what's going on here.
Are there any usb c car chargers that support sfc 2.0?
Click to expand...
Click to collapse

Satechi - USB / USB C car charger with 72W:
Simultaneous Charging: Has both a universal USB A port and a Type-C port
Quick Charge: Devices can be charged quickly on the go
Powerful and compact design: Type-C power 60W (max), Type-A power 12W (max), total 72W
Equipped with an LED indicator to check the charging status
With Power Delivery for particularly fast charging
Compatible with almost all USB devices and most USB Type-C devices
The Satechi USB C and USB A Car Charger is the perfect solution for charging your devices on the go. Never worry about how to charge your smartphone, tablet, computer or other device while on the go. Simply connect the charger to your car's cigarette lighter and connect the other end of the USB cable to the USB port of the desired device. You can already charge your device on the go. Satechi's Dual Car Charger allows you to simultaneously charge a 13" MacBook Pro (2016) via the USB-C port and an iPhone/tablet via the USB-A port. The output power for the USB-C port is 60 W (max) and 12 W for the USB-A port.
ATTENTION: The delivery does not include a USB cable!
Color: white/silver
Brand: Satechi
Model: ST-TCPDCCS
Weight: about 34g
Technical specifications:
Input: DC12V - 24V
USB-C output: 60W (max)
USB A output: 12W (max)
Total Power: 72W
Baseus aluminum 45W USB / USB C car charger:
Charges up to 4 times faster than conventional USB/USB C adapters
Extremely small and light (ideal for travelling)
With support for Power Delivery 3.0 / Quick Charge 4.0
45W output current power
With LED display on the charger
Charge your USB / USB C compatible devices such as smartphones, tablets or MP3 players, etc. in the car now. With the Baseus USB / USB C car charger, your devices are always fully charged while driving. The Baseus Car Charger Auto USB / USB C is ideal for people with active lifestyles who travel a lot. It simply plugs into your vehicle's power outlet (cigarette lighter) and charges while driving.
The power supply also supports the latest Power Delivery 3.0 and Quick Charge 4.0 technologies, with which you can charge your iPhone X up to 50% in just 30 minutes. The car charger always guarantees the maximum charging capacity to charge your electronic devices, with a current output line of up to 6 amps.
ATTENTION: USB/USB C cable not included (can be ordered in store).
The black color
Manufacturer: Baseus
Material: aluminum/plastic
Technical specifications:
Performance/power: 45 watts
Input: 12-24V
USB Output: 4.5V/5A; 5V/4.5A; 9V/3A; 12V/3A; 20V/2.25A
USB-C Output: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/2.25A
Output USB + USB C Total: 5V/6A max
Nmc_alves® said:

Satechi - USB / USB C car charger with 72W:
Simultaneous Charging: Has both a universal USB A port and a Type-C port
Quick Charge: Devices can be charged quickly on the go
Powerful and compact design: Type-C power 60W (max), Type-A power 12W (max), total 72W
Equipped with an LED indicator to check the charging status
With Power Delivery for particularly fast charging
Compatible with almost all USB devices and most USB Type-C devices
The Satechi USB C and USB A Car Charger is the perfect solution for charging your devices on the go. Never worry about how to charge your smartphone, tablet, computer or other device while on the go. Simply connect the charger to your car's cigarette lighter and connect the other end of the USB cable to the USB port of the desired device. You can already charge your device on the go. Satechi's Dual Car Charger allows you to simultaneously charge a 13" MacBook Pro (2016) via the USB-C port and an iPhone/tablet via the USB-A port. The output power for the USB-C port is 60 W (max) and 12 W for the USB-A port.
ATTENTION: The delivery does not include a USB cable!
Color: white/silver
Brand: Satechi
Model: ST-TCPDCCS
Weight: about 34g
Technical specifications:
Input: DC12V - 24V
USB-C output: 60W (max)
USB A output: 12W (max)
Total Power: 72W
Baseus aluminum 45W USB / USB C car charger:
Charges up to 4 times faster than conventional USB/USB C adapters
Extremely small and light (ideal for travelling)
With support for Power Delivery 3.0 / Quick Charge 4.0
45W output current power
With LED display on the charger
Charge your USB / USB C compatible devices such as smartphones, tablets or MP3 players, etc. in the car now. With the Baseus USB / USB C car charger, your devices are always fully charged while driving. The Baseus Car Charger Auto USB / USB C is ideal for people with active lifestyles who travel a lot. It simply plugs into your vehicle's power outlet (cigarette lighter) and charges while driving.
The power supply also supports the latest Power Delivery 3.0 and Quick Charge 4.0 technologies, with which you can charge your iPhone X up to 50% in just 30 minutes. The car charger always guarantees the maximum charging capacity to charge your electronic devices, with a current output line of up to 6 amps.
ATTENTION: USB/USB C cable not included (can be ordered in store).
The black color
Manufacturer: Baseus
Material: aluminum/plastic
Technical specifications:
Performance/power: 45 watts
Input: 12-24V
USB Output: 4.5V/5A; 5V/4.5A; 9V/3A; 12V/3A; 20V/2.25A
USB-C Output: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/2.25A
Output USB + USB C Total: 5V/6A max
Click to expand...
Click to collapse
But I bought the 65W charger and BaseUS said that it can only do PPS 18W.
S23 Ultra requires 10v 4.5 amp to achieve 45 w charging . Charger and Cable both should be capable of 5 amp current capacity and Charger should support PD 3.0 with PPS at 5 amp that is the basic requirement, Cable should have a e-marker chip to identify it as having 5 amp capacity to the charger. usually such cables have 5 amp written on the USB C port and are visibly thicker than the normal 3 amp cables .
ask77 said:
S23 Ultra requires 10v 4.5 amp to achieve 45 w charging . Charger and Cable both should be capable of 5 amp current capacity and Charger should support PD 3.0 with PPS at 5 amp that is the basic requirement, Cable should have a e-marker chip to identify it as having 5 amp capacity to the charger. usually such cables have 5 amp written on the USB C port and are visibly thicker than the normal 3 amp cables .
Click to expand...
Click to collapse
Do you have any reference for that 10V 4.5A information? Some say it's 9V 5A but I never saw any official claims from Samsung regarding that too. I have no issues with cables. I'm using 100W BaseUS cables with e-marker chips on them. They don't have the 5A writing on them but they are obviously thicker than the included Samsung cable (which is only for 25W charging). Here are the specs of the 100W BaseUS desktop charger that I have:
As you can see, it does support PD3.0. Although PPS is not written there, it does support it as well as confirmed by BaseUS support and the video that I showed. I don't see 10V anywhere though so I'm not sure how it works with PPS or something. Does PPS adjust the voltage with fine adjustments or something? Also, that doesn't explain the issue I'm having where SFC 2.0 won't work when two USB ports are used. It only works when the phone is charged alone and this defeats the purpose of buying a multi-port charger in the first place.
Go to settings, about phone , and then status information the last entry there is Rated 10 V 4.5 Amp . Yes pps adjusts voltage with fine adjustment of 20mv . It can provide between 3.3 V to 21 V at upto 5 Amp . Your problem seems to be related to the charger itself which is unable to deliver the required power when two usb ports are used . BTW you can use an app called accubattery which should give you the exact charging data for your phone.
ask77 said:
Go to settings, about phone , and then status information the last entry there is Rated 10 V 4.5 Amp . Yes pps adjusts voltage with fine adjustment of 20mv . It can provide between 3.3 V to 21 V at upto 5 Amp . Your problem seems to be related to the charger itself which is unable to deliver the required power when two usb ports are used . BTW you can use an app called accubattery which should give you the exact charging data for your phone.
Click to expand...
Click to collapse
Ok, I see that now. Well, @Stenlius replied to this thread and says that this is normal. Any comments on that?
What's more weird though is that when it's charging at sfc 2.0, the cable only shows 33w. When I plug in another device in the charger, it renegotiates to sfc 1.0 but still at 33w!
When I use the official 25w samsung charger with the same cable, it goes down to 24w as expected.
SFC 2.0 - So far I have only seen with the Samsung official chargers. I've spent so much money on Belkin, Baseus, UGreen, Anker accessories and never been able to get peak speeds.
JazonX said:
SFC 2.0 - So far I have only seen with the Samsung official chargers. I've spent so much money on Belkin, Baseus, UGreen, Anker accessories and never been able to get peak speeds.
Click to expand...
Click to collapse
Oh wow, that's good to know. Were you getting around the same wattage as I do at 33W? I still have time to return these and is why I'm asking for help here to verify if I don't have an isolated issue or something.
kevindd992002 said:
Oh wow, that's good to know. Were you getting around the same wattage as I do at 33W? I still have time to return these and is why I'm asking for help here to verify if I don't have an isolated issue or something.
Click to expand...
Click to collapse
Never had the tools to measure the wattage output.
I just plug and wait for SFC 2.0 to show up, and if it doesn't - I just get rid of it.
I've tried 120W Xiaomi chargers as well.
Max anything other than samsung genuine chargers can go up to is "Fast Charging" or super charging 1.0.
JazonX said:
Never had the tools to measure the wattage output.
I just plug and wait for SFC 2.0 to show up, and if it doesn't - I just get rid of it.
I've tried 120W Xiaomi chargers as well.
Max anything other than samsung genuine chargers can go up to is "Fast Charging" or super charging 1.0.
Click to expand...
Click to collapse
Well theh that's not the same case as mine. If you read my OP and watched the video, you'll see that I can do sfc 2.0 with this baseus charger but only maxes at 33 watts. I thought you had the same issue as mine.
kevindd992002 said:
Well theh that's not the same case as mine. If you read my OP and watched the video, you'll see that I can do sfc 2.0 with this baseus charger but only maxes at 33 watts. I thought you had the same issue as mine.
Click to expand...
Click to collapse
peak charging only below 20 percent.
after that 3x watt.
after 60 percent 2x watt,same as 25 watt samsung original charger and cable from the box.(3A cable).
basesus gan 2 lite 65 watt and basesus gan 5 pro 65 watt support SFC 2.0.
tested with S23 Ultra.
this image is s23 ultra at 15 percent battery.
charging with samsung original 45 watt charger.
domperidane said:
peak charging only below 20 percent.
after that 3x watt.
after 60 percent 2x watt,same as 25 watt samsung original charger and cable from the box.(3A cable).
basesus gan 2 lite 65 watt and basesus gan 5 pro 65 watt support SFC 2.0.
tested with S23 Ultra.
this image is s23 ultra at 15 percent battery.
charging with samsung original 45 watt charger.
Click to expand...
Click to collapse
Ok, that makes sense. I'll try charging at 15% and see if it makes it to 48W.
Also, have you tried charging yout s23 ultra with more than one usb port plugged in your charger? That does not work as you see in my video.
kevindd992002 said:
Ok, that makes sense. I'll try charging at 15% and see if it makes it to 48W.
Also, have you tried charging yout s23 ultra with more than one usb port plugged in your charger? That does not work as you see in my video.
Click to expand...
Click to collapse
may be there is a problem with your charger.
you can claim warranty.
domperidane said:
may be there is a problem with your charger.
you can claim warranty.
Click to expand...
Click to collapse
No there is none. I posted on reddit before buying this and one guy posted the same issue. Can you test with yours?