Hey,
I had read in a few posts on xda that oppo had locked/disabled fastboot mode on their devices. I was wondering if somebody could test if adb reboot bootloader or adb reboot fastboot are working on the Find X and if so fastboot oem unlock is working?
Thanks in advance
i can confirm that Fastboot mode here it seems to be factory disabled.
adb reboot bootloader it only reboot device on normal OS and "Enable OEM Unlocking" switch it seems to be dead
Disabled mode:
fastboot mode
Avaiable mode:
Recovery Mode :
(adb reboot recovery)
Turn off your device.
Press and hold the Volume down and Power buttons simultaneously until the device turns on.
Qualcomm EDL Mode
(adb reboot edl)
Turn off your device.
Press the Volume Up and Power buttons and connect the USB Cable to the phone.
EDL => Emergency Download Mode
snowwolf725 said:
Disabled mode:
fastboot mode
Avaiable mode:
Recovery Mode :
(adb reboot recovery)
Turn off your device.
Press and hold the Volume down and Power buttons simultaneously until the device turns on.
Qualcomm EDL Mode
(adb reboot edl)
Turn off your device.
Press the Volume Up and Power buttons and connect the USB Cable to the phone.
Click to expand...
Click to collapse
Theoretically it's possible to unlock the bootloader and backup the device partitions through EDL right? Can it be used to emulate the functionalities of fastboot?
rezesius said:
Theoretically it's possible to unlock the bootloader and backup the device partitions through EDL right? Can it be used to emulate the functionalities of fastboot?
Click to expand...
Click to collapse
No, you also need OEM-signed programmer.
In addition, it's very hard to unlock bootloader through EDL mode.
Ref:
https://alephsecurity.com/2018/01/22/qualcomm-edl-1/
EDL = Emergency Download Mode
EDL mode is power than fastboot mode, but it's too hard to use.
You can flash specified partition, or resize partition size in EDL mode.
snowwolf725 said:
No, you also need OEM-signed programmer.
In addition, it's very hard to unlock bootloader through EDL mode.
Ref:
https://alephsecurity.com/2018/01/22/qualcomm-edl-1/
EDL = Emergency Download Mode
EDL mode is power than fastboot mode, but it's too hard to use.
You can flash specified partition, or resize partition size in EDL mode.
Click to expand...
Click to collapse
So literally this phone have no future??*
I don't think so. We just have to use what we can. Maybe get twrp installed through recovery mode
I'll recheck how it had to be done on the axon7. But if I remember, it was a similar issue.
We don't yet know what will or will not be unlocked in the international variant. Even if they just give it the OEM slider without an unlocked bootloader you can sometimes get root through magisk. In theory we should soon get owners in India and the Philippines with an international phone and we should have a better idea then as to what we're up against.
Adding insult to injury, when I asked Oppo India if they'll release the kernel source of the Find X, they immediately send a message back point blank refusing to that
rezesius said:
Adding insult to injury, when I asked Oppo India if they'll release the kernel source of the Find X, they immediately send a message back point blank refusing to that
Click to expand...
Click to collapse
Lmao.... killing it bro. Im not surprised from them..
avetny said:
Lmao.... killing it bro. Im not surprised from them..
Click to expand...
Click to collapse
Haha, knowing Oppo's track record it was kinda expected. I was just hoping they'd change their stance. This is truly a beautiful phone screwed over by their stupid policies
rezesius said:
Haha, knowing Oppo's track record it was kinda expected. I was just hoping they'd change their stance. This is truly a beautiful phone screwed over by their stupid policies
Click to expand...
Click to collapse
Absolutely agree sir.
As long as I can get root I can make it do what I want and that is where the line in the sand lies; no root is my deal-breaker.
krabman said:
As long as I can get root I can make it do what I want and that is where the line in the sand lies; no root is my deal-breaker.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wolfgart said:
i can confirm that Fastboot mode here it seems to be factory disabled.
adb reboot bootloader it only reboot device on normal OS and "Enable OEM Unlocking" switch it seems to be dead
Click to expand...
Click to collapse
Just bought mine in Thailand so I assume it's the global variant. The "Enable OEM Unlocking" works and so does the USB debugging switch. I haven't tried to use fastboot yet.
farang4u said:
Just bought mine in Thailand so I assume it's the global variant. The "Enable OEM Unlocking" works and so does the USB debugging switch. I haven't tried to use fastboot yet.
Click to expand...
Click to collapse
Just bought mine in India and can confirm Bootloader Unlock is availableand should be a piece of cake with OEM Unlock available in the developer options. Oppo Find X is not a mediatek device hence rooting should be easy with kingoroot. I am not rooting risking the security Oppo provides. I am not a developer who can undo it. Hence waiting ...
You have no clue, fastboot is disabled, even in new ColorOS 5.2 beta
yeah no idea we are all bricked with.this.device ?
Bring me in
InspectMyGadget said:
yeah no idea we are all bricked with.this.device
Click to expand...
Click to collapse
If you guys can send me that phone, I'll be able to do some tricks & tries, I've done that before with vivo devices, Oppo is also owned by BBK Electronics, So...
Oppo: Fastboot Disabled
Any update on this issue?
Ive got here an Oppo A7 , purchased for about $280 in the Philippines last December 2018.
"Allow OEM Unlock" can be activated in Developer Options.
But unfortunately "ADB reboot bootloader" seems only to restart the device. Key combinations for fastboot doesnt work either.
Damn stupid brand this is. Goin crazy these past few days untill I saw this thread. never thought of it to be this enthusiast-unfriendly
Related
Hey guys, help.
Playing with dd commands i have now this situation :
I can boot on stock Android OS but it seems i have lost my Download Mode ( corrupted LAF partition maybe...) and Fastboot mode no more here. Stock recovery on my device and no more TWRP and no more root.
If i try to reboot to Download mode or Fastboot mode device it bootloop on LG logo.
How to recover LAF ? i can only boot on Android and OTA are no more available for my device because i have unlocked my bootloader and bootloader is still unlocked in this fu'ck of situation...
Since your bootloader is still unlocked, just reflash laf and recovery. Extract laf from your KDZ and grab a copy of TWRP:
fastboot flash laf laf.image (this will get you download mode back)
fastboot flash recovery twrp.ver.whatever.img
EDIT: Sorry -- missed the part about you saying you have no fastboot mode. With the phone off, have you tried holding vol down and plugging the USB cable in?
-- Brian
runningnak3d said:
EDIT: Sorry -- missed the part about you saying you have no fastboot mode. With the phone off, have you tried holding vol down and plugging the USB cable in?
-- Brian
Click to expand...
Click to collapse
yes sure, just tried all possible manual method to have back fastboot mode or download mode but only have LG Bootloop logo.
i think only hope is someone who release a user root method ( temporaly or tethered too) so i can rewrite LAF from Stock OS
wolfgart said:
yes sure, just tried all possible manual method to have back fastboot mode or download mode but only have LG Bootloop logo.
i think only hope is someone who release a user root method ( temporaly or tethered too) so i can rewrite LAF from Stock OS
Click to expand...
Click to collapse
What happens when you try to flash stock firmware with LG UP? You just let LG UP enter DL mode for you, don't try to manually enter it. Does it bootloop too?
padmanek said:
What happens when you try to flash stock firmware with LG UP? You just let LG UP enter DL mode for you, don't try to manually enter it. Does it bootloop too?
Click to expand...
Click to collapse
sure, same bootloop problem, it seems that LAF is corrupted
Damn. You seem to be pretty screwed. No fastboot and no LG UP flashing. You're left with RMA or just sell it, get a new one.
i think that can be still fixed....
Only need of a temporaly # Shell method or tethered too, just to reflash back LAF
Can LG bridge detect your phone?
asialove2013 said:
Can LG bridge detect your phone?
Click to expand...
Click to collapse
Yes for sure, and LGUP too can easily detect my device as always.
My V30 can be regularly be used in stock Android OS, so LG Bridge it detect perfectly device and ask me for an update to install. All process become, FW downloaded, and then when device is rebooted to apply update i have same problem : NO Download Mode working, only bootloop on LG Logo.
I'm stucked on the lg v30 logo.
adb or fastboot does not detect the phone.
I'm unable to get it on download mode.
any ideas???
thx in advance
any idea on how restore LAF from Android OS ? I can only boot from there
stil not solved problem here
Sorry i dont have any good information for you, im on this same boat, today i try to flash other model to my H932 and finaly got boot loop on logo LG V30
i can go to Fastboot but i have locked bootloader i try to enter in to Download mode but there is show only fist little icon with blue dots abut download mode is starting but after that phone do restart
im so fu.. up with this now because i have locked bootloader and cant flash recovery / boot / laf etc
( i gess recovery mode is blocked by T-mobile or i cant enter there or maybe i also sometnig ruined when i try flash via LGUP diffren software )
If some one has idea please help us
*i cant unlock my bootloader again because in developer option now is dissabled by default this option so when i try "fastboot oem unlock" get error message inform me it is not possible "Flashing Unlock is not allowed"
niko99 said:
Sorry i dont have any good information for you, im on this same boat, today i try to flash other model to my H932 and finaly got boot loop on logo LG V30
i can go to Fastboot but i have locked bootloader i try to enter in to Download mode but there is show only fist little icon with blue dots abut download mode is starting but after that phone do restart
im so fu.. up with this now because i have locked bootloader and cant flash recovery / boot / laf etc
( i gess recovery mode is blocked by T-mobile or i cant enter there or maybe i also sometnig ruined when i try flash via LGUP diffren software )
If some one has idea please help us
*i cant unlock my bootloader again because in developer option now is dissabled by default this option so when i try "fastboot oem unlock" get error message inform me it is not possible "Flashing Unlock is not allowed"
Click to expand...
Click to collapse
Can you get to download mode? If so you can flash back to stock using lg bridge or lg up. The choice is yours on that one but if download mode doesnt work. well that's a tough situation on your hands.
niko99 said:
Sorry i dont have any good information for you, im on this same boat, today i try to flash other model to my H932 and finaly got boot loop on logo LG V30
i can go to Fastboot but i have locked bootloader i try to enter in to Download mode but there is show only fist little icon with blue dots abut download mode is starting but after that phone do restart
im so fu.. up with this now because i have locked bootloader and cant flash recovery / boot / laf etc
( i gess recovery mode is blocked by T-mobile or i cant enter there or maybe i also sometnig ruined when i try flash via LGUP diffren software )
If some one has idea please help us
*i cant unlock my bootloader again because in developer option now is dissabled by default this option so when i try "fastboot oem unlock" get error message inform me it is not possible "Flashing Unlock is not allowed"
Click to expand...
Click to collapse
May I know what other model did you try to flash to your H932, and what mode is your phone status now , can you see com port on your PC device manager, is it Qualcomm HS diagnostic 9025?
Hi @car2carl @R800x_user
I used H932 and i try to flash H930 ( because in H932 there is no my national lang. so i try to flash with H930 UE version )
For the moment working only fastboot mode phone got boot loop on LG V30 logo, that same situation is with download mode, its start but after a few second phone restart...
So i'm in deep sh..t because in europe LG company / repair services rejected my request for repair even for a fee ( because i unlocked bootloader ) becasue phone is brought in USA
I try to flash but all every body know in H932 fastboot commands are cut off ..
i try fastboot flashall command but without success
Also i was play with FASTBOOT UPDATE xxxx.zip maybe with correct prepere zip but my knowledge is itoo small
I have EDL cable, but i cant put my phone in Emergency mode / or do somethnig to my PC detected as Qualcomm 9002 mode ( maybe if battery will be pull out but i dont wona do that or TEST POINT but for the moment on internet is no info about this possiblility )
All is very sed, my question is why i cant flash this phone with orginal firmware using fastboot that is crazy i uderstand there is no possibility flash system from other phone by fastboot etc. but with orginal should be able but is not
niko99 said:
Hi @car2carl @R800x_user
I used H932 and i try to flash H930 ( because in H932 there is no my national lang. so i try to flash with H930 UE version )
For the moment working only fastboot mode phone got boot loop on LG V30 logo, that same situation is with download mode, its start but after a few second phone restart...
So i'm in deep sh..t because in europe LG company / repair services rejected my request for repair even for a fee ( because i unlocked bootloader ) becasue phone is brought in USA
I try to flash but all every body know in H932 fastboot commands are cut off ..
i try fastboot flashall command but without success
Also i was play with FASTBOOT UPDATE xxxx.zip maybe with correct prepere zip but my knowledge is itoo small
I have EDL cable, but i cant put my phone in Emergency mode / or do somethnig to my PC detected as Qualcomm 9002 mode ( maybe if battery will be pull out but i dont wona do that or TEST POINT but for the moment on internet is no info about this possiblility )
All is very sed, my question is why i cant flash this phone with orginal firmware using fastboot that is crazy i uderstand there is no possibility flash system from other phone by fastboot etc. but with orginal should be able but is not
Click to expand...
Click to collapse
Have you tried the simple thing using button when power they call master reset using buttons : (sounds silly) but worth trying
Turn off the device.
Press and hold the Power and Volume down buttons.
When the LG logo appears and quickly release the Power button only and press Power button again but keep pressing the Volume down button until you see the picture below
https://drive.google.com/file/d/10WSl-Ez01owpZAV7o7hFSMO40is1qzcR/view?usp=sharing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I assumed that you don't see any com port (Only Android Bootloader Interface)
in your device manager right?
@ car2carl
Thats is no so silly but i try factory reset and also wipe user data, also recovery is broken i cant go to recovery only fastboot and yes my PC see only "andoid bootloader interface"
niko99 said:
@ car2carl
Thats is no so silly but i try factory reset and also wipe user data, also recovery is broken i cant go to recovery only fastboot and yes my PC see only "andoid bootloader interface"
Click to expand...
Click to collapse
There was a time when I was in fastboot mode using fastboot reboot-edl was working and switch to download mode (using the patch fastboot from link below)
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
But I couldn't repeat it again.
I have XQCN/QCN backup for my phone and I save it , just in case I need it if my flash gone bad, but when I need to restore using qfil or qpst those programmer looking for COM port.
it is easy to get safe mode /diagnostic mode/download mode /fastboot mode when we don't have problem with bootlooping like yours., what was happen to you, holding me from flashing for experiment.
car2carl said:
There was a time when I was in fastboot mode using fastboot reboot-edl was working and switch to download mode (using the patch fastboot from link below)
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
But I couldn't repeat it again.
I have XQCN/QCN backup for my phone and I save it , just in case I need it if my flash gone bad, but when I need to restore using qfil or qpst those programmer looking for COM port.
it is easy to get safe mode /diagnostic mode/download mode /fastboot mode when we don't have problem with bootlooping like yours., what was happen to you, holding me from flashing for experiment.
Click to expand...
Click to collapse
thanks for trying to help me
I downoaded this fastboot and notting
Fastboot reboot-edl
rebooting into edl...
OKAY [ 0.002s]
finished. total time: 0.002s
phone restart but he stop at V30 logo and ( and afeter that my pc stop see phone )
Some know what is possible to "flash" over the fasboot using a command UPDATE ? maybe this is the way
fastboot update <filename> reflash device from update.zip
or second maybe good preper of files for command fastboot flashall will works ?
i try but have info like below
:/
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
Having the same problem. Is there a firmware available online for flashing?
Cedric Miraflor said:
Having the same problem. Is there a firmware available online for flashing?
Click to expand...
Click to collapse
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
ankitnaik16 said:
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
Click to expand...
Click to collapse
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Cedric Miraflor said:
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Click to expand...
Click to collapse
SP Tool work in Download Mode it can be access by pressing volume up + volume down key while phone is off
I see. Im just waiting for somebody with the scatter file for this device
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme ?
RantiHasan said:
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme
Click to expand...
Click to collapse
You Are right Never Buy Realme
I finally went to service center process is too slow and tedious
Going to sell this phone and buy oneplus nord
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
i think realme dont allow you install patched boot when bootloader locked, you should leave bootloader unlocked and never locked it again if you want modified your device.
Same
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Letinamazuki said:
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Click to expand...
Click to collapse
You find solutions
I have same issue. I went to sc and they said they couldn't detect the phone on pc, then they provide one only solution which to replace the whole circuit board
did anyone found any solution?
2021, Please, i want any solution
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
mercan01 said:
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
Click to expand...
Click to collapse
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
erickdiazw said:
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
Click to expand...
Click to collapse
I have the same issue. Did you find any solution?
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
erickdiazw said:
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
Click to expand...
Click to collapse
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
gaduaxe said:
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
Click to expand...
Click to collapse
I'm sorry bro, i have Realme 6 with MediaTek, idk for Qualcomm :c
My phone is completely messed up right now. All I did was flash spark os (A12) over PPUI (A11) and then my phone didn't boot. I flashed that ROM via fastboot flash tool. I think it was the tool which caused this problem. After so many tries, my phone booted but wifi, sound and many other functions aren't working. Then I tried flashing some other ROM but TWRP/Ofox kept giving some "error 7". Then I tried flashing fastboot ROM with 3 versions of Mi flashtool but it keeps giving some kind of CRC flash error. Please help me I'm too much worried right now.
if you flash through fastboot tool do you see any error (if yes then tell us more about the error )if not and rom starts with some issues try flashing the latest firmware
muneeb rizwan said:
if you flash through fastboot tool do you see any error (if yes then tell us more about the error )if not and rom starts with some issues try flashing the latest firmware
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm getting this error continously
move it to c:\
muneeb rizwan said:
move it to c:\
Click to expand...
Click to collapse
now my phone screen has gone black and it won't turn on. Computer still detects it as I'm hearing some sound
I was flashing fastboot ROM using mi flashtool and it gave me error. When I tried to turn on the phone, it didn't turn on. However, when I connect it to PC, the PC makes some sound. What do I do now?
boot your phone into fastboot mode and then connect it to pc and install this rom
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10_V12.0.5.0.RKGMIXM_v12-11-fastboot.zip/download
extract the zip file and you will see a file (install for first time) open it and if all goes well it will flash the rom
muneeb rizwan said:
boot your phone into fastboot mode and then connect it to pc and install this rom
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10_V12.0.5.0.RKGMIXM_v12-11-fastboot.zip/download
extract the zip file and you will see a file (install for first time) open it and if all goes well it will flash the rom
Click to expand...
Click to collapse
I can't even boot into fastboot mode. Screen stays black no matter what key combo I try
The following steps should put your phone into fastboot.
1) Phone off
2) Connect the USB cable to the computer (not the phone for now)
3) Hold the volume down button only
4) Still hold and connect the USB cable to the phone
Now the telefo should start fastboot mode.
StaryMuz said:
The following steps should put your phone into fastboot.
1) Phone off
2) Connect the USB cable to the computer (not the phone for now)
3) Hold the volume down button only
4) Still hold and connect the USB cable to the phone
Now the telefo should start fastboot mode.
Click to expand...
Click to collapse
Didn't work. I guess EDL mode is my last hope now.
Starting EDL mode can be a problem. At present, perhaps EDL cables no longer work and if the phone does not allow you to enter the EDL by key combinations, the only test points left are on the phone's motherboard. With test points, the question is whether the correct points have already been found. The manufacturer does not inform about them.
What driver is loaded in Windows when the phone is connected?
So the test points are already known:
It works by disconnecting the battery to completely shut down the hardware. Conductively connect the test points (tweezers, scissors) and with the points connected, connect the USB cable plugged into the PC. This activates the EDL mode (sometimes only very briefly). You need to have MiFlash running beforehand and use "refresh" and "Flash" right away. If nothing happens, probably the EDL mode has already been switched off again.
For flash in EDL mode you can normally use MiFlash with ROM for fastboot.
If the Qualcomm HS-USB QDLoader 9008 Windows driver is loaded, this is the EDL mode.
StaryMuz said:
For flash in EDL mode you can normally use MiFlash with ROM for fastboot.
If the Qualcomm HS-USB QDLoader 9008 Windows driver is loaded, this is the EDL mode.
Click to expand...
Click to collapse
I wonder how did my phone boot into edl mode although I never opened its back cover.
And right now the problem is that Mi Flashtool is showing some edl authentication error. How do I resolve that?
First, it is very important to call things by their correct name, otherwise misunderstandings and mistakes in procedure can arise. What do you mean "Mi Flahtool"?
You should have used this:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
I think the flashtool version of 2017 works without any problem, coz, recently I unbricked my Poco x2 with this version of flashtool. The latest versions of flashtools are getting errors. And move the flash files to C: partition mandatory
StaryMuz said:
First, it is very important to call things by their correct name, otherwise misunderstandings and mistakes in procedure can arise. What do you mean "Mi Flahtool"?
You should have used this:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
Click to expand...
Click to collapse
That's exactly what I used. I even tried the latest version but still no luck.
Shibu Shaji said:
I think the flashtool version of 2017 works without any problem, coz, recently I unbricked my Poco x2 with this version of flashtool. The latest versions of flashtools are getting errors. And move the flash files to C: partition mandatory
Click to expand...
Click to collapse
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
Bro, connect to a VPN , change the language of auth window and bind your mi account details there. And give it a try on tool version 2017.4.25... If nothing works go for edl.
munimjaffer said:
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
View attachment 5504363
Click to expand...
Click to collapse
munimjaffer said:
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
View attachment 5504363
Click to expand...
Click to collapse
Bro, use the same version of flash tool that I mentioned above.. 2017.4.25 with flash all command.
Hi everyone, I'm in need of some help ASAP. I unlocked my ANE-LX1 phone's bootloader so that I could root it, but things went wrong. My phone is stuck on TWRP logo screen (No TWRP menu, only logo) and my PC doesn't recognize it no matter what. I can only access the fastboot screen but it means nothing when you can't use ADB commands. I really don't know what to do, please help!
@-Alf- Hope that you'd help
soslusos said:
@-Alf- Hope that you'd help
Click to expand...
Click to collapse
Hi, try to explain what exactly happened, step by step.
soslusos said:
when you can't use ADB commands
Click to expand...
Click to collapse
For what reason?
-Alf- said:
Hi, try to explain what exactly happened, step by step.
For what reason?
Click to expand...
Click to collapse
Ok so I unlocked the bootloader, then I tried to root with Magisk by using adb but somehow it didn't work so I decided to install TWRP. I was on 9.1 but TWRP version was 9.0. I installed it and phone started to boot into TWRP only. PC recognized the phone but there were a bunch of folders with weird names. So I pressed on Format Data in TWRP but it didn't progress so I had to force-shut down my phone. Now PC doesn't recognize the phone at all. It's stuck on TWRP logo screen. Since my PC can't read the phone, I'm unable to use adb commands.
soslusos said:
Ok so I unlocked the bootloader, then I tried to root with Magisk by using adb but somehow it didn't work so I decided to install TWRP. I was on 9.1 but TWRP version was 9.0. I installed it and phone started to boot into TWRP only. PC recognized the phone but there were a bunch of folders with weird names. So I pressed on Format Data in TWRP but it didn't progress so I had to force-shut down my phone. Now PC doesn't recognize the phone at all. It's stuck on TWRP logo screen. Since my PC can't read the phone, I'm unable to use adb commands.
Click to expand...
Click to collapse
Format Data in incompatible TWRP? Really not good idea...
Okay, try the following:
- install on PC "Minimal ADB and fastboot" , open it, run command
fastboot devices <enter>
You'll get message 'waiting for any device'.
- Turn off the phone, hold Volume Down and connect to PC. Post the result.
What is region? (Cxxx)
-Alf- said:
Format Data in incompatible TWRP? Really not good idea...
Okay, try the following:
- install on PC "Minimal ADB and fastboot" , open it, run command
fastboot devices <enter>
You'll get message 'waiting for any device'.
- Turn off the phone, hold Volume Down and connect to PC. Post the result.
What is region? (Cxxx)
Click to expand...
Click to collapse
First of all, thank you man. It was suggested by someone on XDA, I shouldn't have done it.
I think the regional code is C121, I bought it in Turkey.
The thing is my phone doesn't turn off. Even when I force it by holding the button, it just turns back on. It stays like that until the battery dies.
I can open the fastboot screen by holding the vol down button and it says:
ap_s_abnormal 64
phone unlocked
frp unlocked
Have you tried connect to PC, then press and hold Power + Vol Down for 10-12 sec?
soslusos said:
It was suggested by someone on XDA
Click to expand...
Click to collapse
I bet I know who it was
Yeah I tried that, it just opens fastboot mode after phone restarts.
soslusos said:
Yeah I tried that, it just opens fastboot mode after phone restarts.
Click to expand...
Click to collapse
Game over . Test point method & board SW or DC-Phenix is your friend (maybe...). Unfortunately, I can't help you with this, I've never done it.
Damn. I don't even know what they are Can customer services do anything with this? I guess I'll have to pay.
soslusos said:
Can customer services do anything with this?
Click to expand...
Click to collapse
I guess so. It's all a matter of money .
Haha yeah but some stuff you do on your phone might be irreversible, that's what I'm afraid of.
So do you actually know what caused my device to boot into TWRP menu only? Is it because TWRP is incompatible with Android 9.1? (Or is it?)
soslusos said:
some stuff you do on your phone might be irreversible
Click to expand...
Click to collapse
Yes, e.g. damaged motherboard...
soslusos said:
So do you actually know what caused my device to boot into TWRP menu only? Is it because TWRP is incompatible with Android 9.1? (
Click to expand...
Click to collapse
Of course I cannot say that for sure. But I can say for sure that doing 'data format' (running stock EMUI) on some TWRP 3.4. and above can brick Kirin 659 device.
@-Alf- Hey, my phone is finally fixed. Do you know what's the latest firmware for 9.1 and where to download it? I'll install that one after rooting my phone.
soslusos said:
what's the latest firmware for 9.1
Click to expand...
Click to collapse
Hi, .401 (for C432 region)
soslusos said:
where to download it?
Click to expand...
Click to collapse
via OTA update
soslusos said:
I'll install that one after rooting my phone.
Click to expand...
Click to collapse
I would suggest updating first and then root
OTA says 9.1.0.208 is the latest version but I highly doubt that, something must be wrong with this ROM because the customer service guy installed it. My phone is C121 by the way.
soslusos said:
OTA says 9.1.0.208 is the latest version but I highly doubt that, something must be wrong with this ROM because the customer service guy installed it. My phone is C121 by the way.
Click to expand...
Click to collapse
Try to update via HiSuite or using option "Download latest version etc." in eRecovery. Maybe .208 is really the latest version for regional variant C121, idk...
-Alf- said:
Try to update via HiSuite or using option "Download latest version etc." in eRecovery. Maybe .208 is really the latest version for regional variant C121, idk...
Click to expand...
Click to collapse
So I was gonna roll back to EMUI 8 to unlock the bootloader but this time there's no "Switch to previous versions" option... In phone settings it says LGRP_OVS 9.1.0.208, is that the cause? How am I gonna unlock the bootloader now? So confused, I don't want to mess things up this time
soslusos said:
LGRP_OVS 9.1.0.208, is that the cause?
Click to expand...
Click to collapse
Yes, it is. Incompatible or incomplete FW .
In fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I want to unlock the bootloader of my device.
my device is samsung galaxy tab e (sm-t375s) using android Marshmallow. This is an old device.
Cellular service provider is SKT (in korea)
I installed twrp and did routing using magisk, but it became a brick, so I covered the stock ROM.
Once I unlock the bootloader, I'll root it again.
i am downloading Adb, I succeeded in making my device recognized in adb.
For example, entering [ ADB devices ] recognizes my device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, if I enter [ADB bootloader], reboots. But it's a normal boot - such as pressing the power button to restart -. I cannot enter the bootloader.
if I enter [fastboot flashing unlock], prompt <waitng for any device >, we couldn't find the device, so i had to shut down the powershell.
And when I type [fastboot devices], adb doesn't return any response.
So I tried.
1.Update USB Drivers
It didn't work.
2.Power Button & Home Button & Volume+ Button -> Enter Recovery Mode -> Select reboot to bootloader
This method also becomes normal boot and cannot enter fast boot mode.
3.Power Button & Home Button & Volume - Button -> Enter Download Mode
Recent Galaxy devices can unlock in download mode. But my device is too old to do.
Running adb in download mode does not recognize my device. I mean, even the [adb devices] command is impossible.
How can I unlock the bootloader?
Samsung devices don’t have a traditional bootloader, but something the company calls “Download mode.” To access it, press and hold the volume down, power, and home buttons until the Samsung logo shows up, then release. In order to flash anything in downloader mode, you might need a patched version of odin. Try using the search bar on XDA or search the internet for a way for you to do it.
Have a look at THIS page which will tell you all about it. I wouldn't go downloading a bunch of stuff from there as I am not sure if it is any good but, it's a great read and it'll be very informative to you.
Also, be very careful what you do to your phone without ever having done it before or without reading things in their entirety. You could Brick your device. (render it useless)
I'm sure it's likely similar to this post. The search bar is your friend!
BookCase said:
Samsung devices don’t have a traditional bootloader, but something the company calls “Download mode.” To access it, press and hold the volume down, power, and home buttons until the Samsung logo shows up, then release. In order to flash anything in downloader mode, you might need a patched version of odin. Try using the search bar on XDA or search the internet for a way for you to do it.
Have a look at THIS page which will tell you all about it. I wouldn't go downloading a bunch of stuff from there as I am not sure if it is any good but, it's a great read and it'll be very informative to you.
Also, be very careful what you do to your phone without ever having done it before or without reading things in their entirety. You could Brick your device. (render it useless)
I'm sure it's likely similar to this post. The search bar is your friend!
Click to expand...
Click to collapse
First of all, thank you for your kind reply.
But did you read my question well? I'm sorry if I didn't write the question properly.
I read all the tutorials I could see.
I tried to enter the download mode that you linked first.
In my question, please look at the numbers one to three.
As a result, I can enter download mode, but adb does not recognize my device. Updating the driver is the same.
I can enter download mode, but then adb doesn't recognize my device.
Normally(system booting), it becomes adb devices, but when i enter download mode, i can't do it at all.
Secondly, is bootloader unlock only available in custom ROM?
I tried all the previous attempts in stock rom. If it's only possible in custom ROM, it's my mistake.
I downloaded the file from the site you mentioned (second). However, if I try to send it to my device by odin, it fails.
Is it because SM-t377p is global version and my SM-t375s is Korean local version?
It is the same device and the same screen size, but the model names of the two devices are different.
If you say unlock is possible only in custom ROM, I will find my own custom ROM.
Thank you.
I'm sorry, I know that is not your device but, it is similar. Those were just examples. I am trying to help you but, I'm not completely sure if I can. I believe your tablet is Wi-fi only. You should see a toggle in "Developer Options" on the device that says "OEM Unlocking". You should toggle that on as well as USB Debugging. When you connect the device to the PC you should switch it to "Transfer Files" instead of just charging and when you do that, you should get a popup to allow the PC to control it. Approve that. Then try rebooting into "Download Mode" and see if there's an option to unlock the bootloader on the device. If not, I don't know. I have done this before with other Galaxy tablets. I know it's not difficult. Are you sure the bootloader is even locked?
BookCase said:
I'm sorry, I know that is not your device but, it is similar. Those were just examples. I am trying to help you but, I'm not completely sure if I can. I believe your tablet is Wi-fi only. You should see a toggle in "Developer Options" on the device that says "OEM Unlocking". You should toggle that on as well as USB Debugging. When you connect the device to the PC you should switch it to "Transfer Files" instead of just charging and when you do that, you should get a popup to allow the PC to control it. Approve that. Then try rebooting into "Download Mode" and see if there's an option to unlock the bootloader on the device. If not, I don't know. I have done this before with other Galaxy tablets. I know it's not difficult. Are you sure the bootloader is even locked?
Click to expand...
Click to collapse
Thank you for your advice.
My device is a cellular model. But I didn't register with the carrier.
I toggled the options "OEM Unlocking" and "USB Debugging". And I connected it to my computer, and I switched it to "Transfer Files."
Could you tell me the device and version that you succeeded in?
There is no bootloader unlock option in my download mode.
Maybe you saw this screen.
But I look at this screen.
(This picture is not my device.)
Can you see the difference between the two pictures?
First, there are three menus. It has the option of unlocking the boot loader (Long press volum +, device unlock mode.)
The second is two menus. and there is no such option.
Pressing and holding the Volume+Key on this screen does not enter bootloader.
Has anyone found a solution? I am having the exact problem with my Samsung Galaxy Tab S8 5G (UK model, not locked with a specific mobile carrier, should be bootloader un-lockable). I can go to download mode, but don't have the option for unlocking bootloader with long pressing vol+ on the warning screen. If I press Vol, I am taken to the 'downloading' page and I can only get out of it to reboot. I've been trying to find a solution with no avail.