1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
Having the same problem. Is there a firmware available online for flashing?
Cedric Miraflor said:
Having the same problem. Is there a firmware available online for flashing?
Click to expand...
Click to collapse
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
ankitnaik16 said:
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
Click to expand...
Click to collapse
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Cedric Miraflor said:
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Click to expand...
Click to collapse
SP Tool work in Download Mode it can be access by pressing volume up + volume down key while phone is off
I see. Im just waiting for somebody with the scatter file for this device
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme ?
RantiHasan said:
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme
Click to expand...
Click to collapse
You Are right Never Buy Realme
I finally went to service center process is too slow and tedious
Going to sell this phone and buy oneplus nord
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
i think realme dont allow you install patched boot when bootloader locked, you should leave bootloader unlocked and never locked it again if you want modified your device.
Same
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Letinamazuki said:
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Click to expand...
Click to collapse
You find solutions
I have same issue. I went to sc and they said they couldn't detect the phone on pc, then they provide one only solution which to replace the whole circuit board
did anyone found any solution?
2021, Please, i want any solution
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
mercan01 said:
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
Click to expand...
Click to collapse
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
erickdiazw said:
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
Click to expand...
Click to collapse
I have the same issue. Did you find any solution?
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
erickdiazw said:
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
Click to expand...
Click to collapse
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
gaduaxe said:
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
Click to expand...
Click to collapse
I'm sorry bro, i have Realme 6 with MediaTek, idk for Qualcomm :c
Related
My phone is completely messed up right now. All I did was flash spark os (A12) over PPUI (A11) and then my phone didn't boot. I flashed that ROM via fastboot flash tool. I think it was the tool which caused this problem. After so many tries, my phone booted but wifi, sound and many other functions aren't working. Then I tried flashing some other ROM but TWRP/Ofox kept giving some "error 7". Then I tried flashing fastboot ROM with 3 versions of Mi flashtool but it keeps giving some kind of CRC flash error. Please help me I'm too much worried right now.
if you flash through fastboot tool do you see any error (if yes then tell us more about the error )if not and rom starts with some issues try flashing the latest firmware
muneeb rizwan said:
if you flash through fastboot tool do you see any error (if yes then tell us more about the error )if not and rom starts with some issues try flashing the latest firmware
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm getting this error continously
move it to c:\
muneeb rizwan said:
move it to c:\
Click to expand...
Click to collapse
now my phone screen has gone black and it won't turn on. Computer still detects it as I'm hearing some sound
I was flashing fastboot ROM using mi flashtool and it gave me error. When I tried to turn on the phone, it didn't turn on. However, when I connect it to PC, the PC makes some sound. What do I do now?
boot your phone into fastboot mode and then connect it to pc and install this rom
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10_V12.0.5.0.RKGMIXM_v12-11-fastboot.zip/download
extract the zip file and you will see a file (install for first time) open it and if all goes well it will flash the rom
muneeb rizwan said:
boot your phone into fastboot mode and then connect it to pc and install this rom
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10_V12.0.5.0.RKGMIXM_v12-11-fastboot.zip/download
extract the zip file and you will see a file (install for first time) open it and if all goes well it will flash the rom
Click to expand...
Click to collapse
I can't even boot into fastboot mode. Screen stays black no matter what key combo I try
The following steps should put your phone into fastboot.
1) Phone off
2) Connect the USB cable to the computer (not the phone for now)
3) Hold the volume down button only
4) Still hold and connect the USB cable to the phone
Now the telefo should start fastboot mode.
StaryMuz said:
The following steps should put your phone into fastboot.
1) Phone off
2) Connect the USB cable to the computer (not the phone for now)
3) Hold the volume down button only
4) Still hold and connect the USB cable to the phone
Now the telefo should start fastboot mode.
Click to expand...
Click to collapse
Didn't work. I guess EDL mode is my last hope now.
Starting EDL mode can be a problem. At present, perhaps EDL cables no longer work and if the phone does not allow you to enter the EDL by key combinations, the only test points left are on the phone's motherboard. With test points, the question is whether the correct points have already been found. The manufacturer does not inform about them.
What driver is loaded in Windows when the phone is connected?
So the test points are already known:
It works by disconnecting the battery to completely shut down the hardware. Conductively connect the test points (tweezers, scissors) and with the points connected, connect the USB cable plugged into the PC. This activates the EDL mode (sometimes only very briefly). You need to have MiFlash running beforehand and use "refresh" and "Flash" right away. If nothing happens, probably the EDL mode has already been switched off again.
For flash in EDL mode you can normally use MiFlash with ROM for fastboot.
If the Qualcomm HS-USB QDLoader 9008 Windows driver is loaded, this is the EDL mode.
StaryMuz said:
For flash in EDL mode you can normally use MiFlash with ROM for fastboot.
If the Qualcomm HS-USB QDLoader 9008 Windows driver is loaded, this is the EDL mode.
Click to expand...
Click to collapse
I wonder how did my phone boot into edl mode although I never opened its back cover.
And right now the problem is that Mi Flashtool is showing some edl authentication error. How do I resolve that?
First, it is very important to call things by their correct name, otherwise misunderstandings and mistakes in procedure can arise. What do you mean "Mi Flahtool"?
You should have used this:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
I think the flashtool version of 2017 works without any problem, coz, recently I unbricked my Poco x2 with this version of flashtool. The latest versions of flashtools are getting errors. And move the flash files to C: partition mandatory
StaryMuz said:
First, it is very important to call things by their correct name, otherwise misunderstandings and mistakes in procedure can arise. What do you mean "Mi Flahtool"?
You should have used this:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
Click to expand...
Click to collapse
That's exactly what I used. I even tried the latest version but still no luck.
Shibu Shaji said:
I think the flashtool version of 2017 works without any problem, coz, recently I unbricked my Poco x2 with this version of flashtool. The latest versions of flashtools are getting errors. And move the flash files to C: partition mandatory
Click to expand...
Click to collapse
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
Bro, connect to a VPN , change the language of auth window and bind your mi account details there. And give it a try on tool version 2017.4.25... If nothing works go for edl.
munimjaffer said:
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
View attachment 5504363
Click to expand...
Click to collapse
munimjaffer said:
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
View attachment 5504363
Click to expand...
Click to collapse
Bro, use the same version of flash tool that I mentioned above.. 2017.4.25 with flash all command.
THIS GUIDE DOES NOT APPLY TO THE HARD BRICK, WHERE FASTBOOT DOES NOT WORK!!!
1) Download MI Flash: https://xiaomiflashtool.com/ (i downloaded mine from here.)
2) Download phone's original firmware. https://xiaomifirmwareupdater.com/miui/ (search the phone and select rom depending on your country.)
Remember to download the fastboot firmware.
3) Extract firmware to a folder, like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I used 7-zip.
4) Open MI Flash and let it install all the drivers needed.
5) Reboot your phone into fastboot mode (hold power key + vol down key) and plug it into your computer.
6) In MI Flash select the folder when you extracted the firmware.
7) Click refresh and make sure the program detects your phone.
8) Down the window, select clean all (otherwise it will lock the bootloader)
9) Click Flash.
Done.
NOTE: if the program displays an error "error: no command fastboot lock /s" don't worry about it. The system will work anyways.
NOTE: recovery gets replaced by the stock one
NOTE: you can just use the flash_all.bat file to flash it, but i recomend using the program. The .bat file also did not work for me.
Gabiblocks said:
THIS GUIDE DOES NOT APPLY TO THE HARD BRICK, WHERE FASTBOOT DOES NOT WORK!!!
1) Download MI Flash: https://www.xiaomiflash.com/ (i downloaded mine from here.)
2) Download phone's original firmware. https://xiaomifirmwareupdater.com/miui/ (search the phone and select rom depending on your country.)
Remember to download the fastboot firmware.
3) Extract firmware to a folder, like this:
View attachment 5549219
I used 7-zip.
4) Open MI Flash and let it install all the drivers needed.
5) Reboot your phone into fastboot mode (hold power key + vol down key) and plug it into your computer.
6) In MI Flash select the folder when you extracted the firmware.
7) Click refresh and make sure the program detects your phone.
8) Down the window, select clean all (otherwise it will lock the bootloader)
9) Click Flash.
Done.
NOTE: if the program displays an error "error: no command fastboot lock /s" don't worry about it. The system will work anyways.
NOTE: recovery gets replaced by the stock one
NOTE: you can just use the flash_all.bat file to flash it, but i recomend using the program. The .bat file also did not work for me.
Click to expand...
Click to collapse
The version of Mi Flash is obsolete(218).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
NOSS8 said:
The version of Mi Flash is obsolete(218).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
It provides the same link lol
Gabiblocks said:
THIS GUIDE DOES NOT APPLY TO THE HARD BRICK, WHERE FASTBOOT DOES NOT WORK!!!
1) Download MI Flash: https://xiaomiflashtool.com/ (i downloaded mine from here.)
2) Download phone's original firmware. https://xiaomifirmwareupdater.com/miui/ (search the phone and select rom depending on your country.)
Remember to download the fastboot firmware.
3) Extract firmware to a folder, like this:
View attachment 5549219
I used 7-zip.
4) Open MI Flash and let it install all the drivers needed.
5) Reboot your phone into fastboot mode (hold power key + vol down key) and plug it into your computer.
6) In MI Flash select the folder when you extracted the firmware.
7) Click refresh and make sure the program detects your phone.
8) Down the window, select clean all (otherwise it will lock the bootloader)
9) Click Flash.
Done.
NOTE: if the program displays an error "error: no command fastboot lock /s" don't worry about it. The system will work anyways.
NOTE: recovery gets replaced by the stock one
NOTE: you can just use the flash_all.bat file to flash it, but i recomend using the program. The .bat file also did not work for me.
Click to expand...
Click to collapse
my device is not going in fastboot any fix?
Gabiblocks said:
THIS GUIDE DOES NOT APPLY TO THE HARD BRICK, WHERE FASTBOOT DOES NOT WORK!!!
1) Download MI Flash: https://xiaomiflashtool.com/ (i downloaded mine from here.)
2) Download phone's original firmware. https://xiaomifirmwareupdater.com/miui/ (search the phone and select rom depending on your country.)
Remember to download the fastboot firmware.
3) Extract firmware to a folder, like this:
View attachment 5549219
I used 7-zip.
4) Open MI Flash and let it install all the drivers needed.
5) Reboot your phone into fastboot mode (hold power key + vol down key) and plug it into your computer.
6) In MI Flash select the folder when you extracted the firmware.
7) Click refresh and make sure the program detects your phone.
8) Down the window, select clean all (otherwise it will lock the bootloader)
9) Click Flash.
Done.
NOTE: if the program displays an error "error: no command fastboot lock /s" don't worry about it. The system will work anyways.
NOTE: recovery gets replaced by the stock one
NOTE: you can just use the flash_all.bat file to flash it, but i recomend using the program. The .bat file also did not work for me.
Click to expand...
Click to collapse
Error: critical partition flashing not allowed
Already tried the newest MiFlash Tool from the link provided above, AND the older one. Same.
What should I do?
Pasarireng said:
Error: critical partition flashing not allowed
Already tried the newest MiFlash Tool from the link provided above, AND the older one. Same.
What should I do?
Click to expand...
Click to collapse
Is the bootloader unlocked?
NOSS8 said:
Is the bootloader unlocked?
Click to expand...
Click to collapse
No. the Boot Loader is Locked.
There's no explanation about that in the 1st Post nor in other previous posts (that if the Boot Loader is locked then anybody doing this guide as it is being told, will surely find those error like me (Critical partition flashing not allowed),
so no wonder I get that error.
But then,... (before I tried this guide), it was because, after I did Factory Reset and Wipe Data) my phone was stucked on "MiUI 11 Logo' (on white background -where I can change Language and font size, but no further from that), (that's why then I tried this guide),,.. so (my point is) there's no way I can Unlock the Boot Loader first.
So, then, I try a step I watched on YouTube.
I put off the phone's back case, disconnected the battery, and so on and so on just like the video told, (EDL Flashing).
Success. (at least that was what the MiFlash Tools app told me on my PC screen)...
Put on everything back, try to turn on my phone.. but now it is doing boot loop... (and worse,.. now the boot loop is on MiUI logo with black background, even before where it was at the 1st time)
Can somebody help me?
If you can enter fastboot mode, use fastboot oem device-info to check the status.
You edited your post:
Xiaomi official tool not working?
NOSS8 said:
If you can enter fastboot mode, use fastboot oem device-info to check the status.
You edited your post:
Xiaomi official tool not working?
Click to expand...
Click to collapse
First of all, thanks for your kindness to help me.
and, Yes I often edit my post, because my English is not good and I did many mistyping. (sorry).
I edit it to make it better and clearer (for anybody who'd like to help me, like you.. Thanks again in advance).
----------
*I cannot enter Fastboot now, because it seems there's other problem, that is, I ruin the plastic power & volumes buttons (maybe when I took off the back case) somehow, they don't work now.
*I didn't and haven't try that Xiaomi Official UnlockTool, because like I said in my previous post, I didn't know that to do the guide in the 1st post in this thread, my phone has to be in UBL condition first. And I was in condition where I couldn't enter my phone (to login to Xiaomi ID on my phone, for example).
Pasarireng said:
First of all, thanks for your kindness to help me.
and, Yes I often edit my post, because my English is not good. (sorry).
I edit it to make it better and clearer (for anybody who'd like to help me, like you.. Thanks again in advance).
*I cannot enter Fastboot now, because it seems there's other problem, that is, I ruin the plastic power button (maybe when I took off the back case) somehow, it doesn't work now.
*I didn't and haven't try that Xiaomi Official UnlockTool, because like I said in my previous post, I didn't know that to do the guide in the 1st post in tis thread, my phone has to be in UBL condition first.
Click to expand...
Click to collapse
The problem in the OP is that it is not specified that the bootloader must be unlocked to use MIFLASH.
NOSS8 said:
The problem in the OP is that it is not specified that the bootloader must be unlocked to use MIFLASH.
Click to expand...
Click to collapse
yes.
(or perhaps, also mention that the Locked one still can use MIFLASH, only if they doing the EDL steps).
now I don't know what should I do to fix my phone (Redmi 5a) and make it work again.
can u help me?
Pasarireng said:
yes.
(or perhaps, also mention that the Locked one still can use MIFLASH, only if they doing the EDL steps).
now I don't know what should I do to fix my phone (Redmi 5a) and make it work again.
can u help me?
Click to expand...
Click to collapse
Start by repairing the defective button.
Or use this tool (rom currently on the phone).
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
The soc is MediaTek isn't it?
NOSS8 said:
Start by repairing the defective button.
Or use this tool (rom currently on the phone).
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
The soc is MediaTek isn't it?
Click to expand...
Click to collapse
yea.. TBH that is not easy too for me (to fix the buttons), I don't have a skillful hands LOL,.. but I'll try.
The SoC of my phone (Redmi 5a) is Qualcomm, Snapdragon 425
Pasarireng said:
yea.. TBH that is not easy too for me (to fix the buttons), I don't have a skillful hands LOL,.. but I'll try.
The SoC of my phone (Redmi 5a) is Qualcomm, Snapdragon 425
Click to expand...
Click to collapse
OK
Another tool:
(Tool) ROM2box All in one FRP, Flashing & unlocking tool
ROM2box is a Powerful tool and GUI bring all the tools on a single app. it support qcom mediatek and spreadtum phones. Supported Functions- Function Name Status bypass Auth Yes bypass FRP MTK yes bypass FRP qcom yes bypass FRP samsung...
forum.xda-developers.com
NOSS8 said:
OK
Another tool:
(Tool) ROM2box All in one FRP, Flashing & unlocking tool
ROM2box is a Powerful tool and GUI bring all the tools on a single app. it support qcom mediatek and spreadtum phones. Supported Functions- Function Name Status bypass Auth Yes bypass FRP MTK yes bypass FRP qcom yes bypass FRP samsung...
forum.xda-developers.com
Click to expand...
Click to collapse
tks, I'll read and maybe will try it after
Pasarireng said:
tks, I'll read and maybe will try it after
Click to expand...
Click to collapse
You should have posted here:
Useful information
Xiaomi Redmi 5A Guides, News, & Discussion
Use this forum to find the best how-to guides for the Xiaomi Redmi 5A and discover the latest news. General discussion also goes here.
forum.xda-developers.com
NOSS8 said:
You should have posted here:
Useful information
Xiaomi Redmi 5A Guides, News, & Discussion
Use this forum to find the best how-to guides for the Xiaomi Redmi 5A and discover the latest news. General discussion also goes here.
forum.xda-developers.com
Click to expand...
Click to collapse
I will. After the hassle either sad or -hopefully- happy ending
Pasarireng said:
I will. After the hassle either sad or -hopefully- happy ending
Click to expand...
Click to collapse
Maybe it's time to change phone.
NOSS8 said:
Maybe it's time to change phone.
Click to expand...
Click to collapse
Yeah, I'm still waiting for my payday LOL...
Actually I'm in series of bad luck,.. I lost my previous phones, (a redmi Note 10),, so I have to re-use this my old Redmi 5a blue phone, just after my other, the silver (redmi 5a too) was its screen suddenly cannot be touch when I used it as my first emergency replacement.
Hello all, I've been trying to install /e/ os GSI on my Redmi Note 11S. I already unlocked the bootloader.
Whenever i tried flashing system.img, (with boot.img patched manually via fastboot, not via a custom recovery), the phone would only boot fastboot. So I tried installing this custom recovery, and patch boot.img from there, but that still wouldn't work (though the recovery at least worked). So I tried installing the stock ROM, and try something else.
I went with latest fastboot EEA image and ran flash_all.sh (worked last time I tried), but this time I got an error (something about partition preloader not found). So I restarted the phone after which it got stuck in this bootloop. Can't boot into fastboot, nor recovery. Instead, the phone keeps flashing the mi logo on and off every 5 seconds. fastboot on my Linux install can't detect the phone. My Windows 10 install can't find it either, though it plays the "device connected" sound followed by the "device disconnected" sound shortly after. I can't turn the phone off either. Windows 10 USB drivers worked, or at least when I was unlocking the bootloader, so I don't think the issue is there. Any idea how to fix this?
Thank you in advance
Edit: Typos. Also I noticed that it only plays the "device connected" and "disconnected" sounds on Windows 10 only when i hold down the power and vol- buttons.
UPDATE: This tool can at least detect the phone, though I do get this error afterwards:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE: Managed to get FASTBOOT back, thanks to this kind stranger (system is still unbootable).
UPDATE: IT'S ALIVE! Did a quick install_all.sh on the stock ROM, and it's working again! Thank you all for helping me resolve this problem
no idea
Normally you use flashall.bat and not .sh, try using flashall.bat and hopefully you'll get out of the bootloop.
Try following my "how to fix bootloop" guide again, atleast till step 4 when you get the fastboot mode back up again.
warhead1721972 said:
Normally you use flashall.bat and not .sh, try using flashall.bat and hopefully you'll get out of the bootloop.
Try following my "how to fix bootloop" guide again, atleast till step 4 when you get the fastboot mode back up again.
Click to expand...
Click to collapse
Could you send a link to the guide please? The only guide I could find on your profile is the one with the rooting, which is among the first guides I tried and it was the one to get me into this situation. Note that in your guide, it appears that you can at least get to the FASTBOOT screen, which I can't. My phone just stays on the logo for 5 seconds before rebooting, and no matter which buttons I press or hold, I can't get it to go to the FASTBOOT screen.
Also, what's the difference between flash_all.bat, and flash_all.sh, aside of one being for Linux and the other for Windows?
UPDATE: This tool can at least detect the phone, though I do get this error afterwards:
kritomas said:
Could you send a link to the guide please? The only guide I could find on your profile is the one with the rooting, which is among the first guides I tried and it was the one to get me into this situation. Note that in your guide, it appears that you can at least get to the FASTBOOT screen, which I can't. My phone just stays on the logo for 5 seconds before rebooting, and no matter which buttons I press or hold, I can't get it to go to the FASTBOOT screen.
Also, what's the difference between flash_all.bat, and flash_all.sh, aside of one being for Linux and the other for Windows?
Click to expand...
Click to collapse
Press and hold all the 3 buttons, vol +, vol - and power button at the same time, till you see the phone switched off for a few seconds.
Then press the power and vol - button to get to the fastboot mode.
About the flashall.bat, I completely forgot that you were using Linux my bad.
Also sometimes some drivers don't work well in Linux try using windows.
Did you follow the guide which was at the end of this?
warhead1721972 said:
Press and hold all the 3 buttons, vol +, vol - and power button at the same time, till you see the phone switched off for a few seconds.
Then press the power and vol - button to get to the fastboot mode.
About the flashall.bat, I completely forgot that you were using Linux my bad.
Also sometimes some drivers don't work well in Linux try using windows.
Did you follow the guide which was at the end of this?
Click to expand...
Click to collapse
Yes, that's the one, and it won't go into fastboot.
Isn't /e/ Murena GSI just android 10? I am pretty sure it won't work. I had the same problem, but I fixed it by installing stock ROM..
And that /e/ GSI is not actively developed and not even in beta stage (not usable at most cases)
Don't use SP Flash tool for full flash this phone seriously, Sp flash tool will make your phone stuck in recovery miui and show Nvdata Corrupted even you choose download only mode.
for now try to use mtkclient to flash boot.img only to both side A&B.
move your boot.img to mtk client folder
open cmd on that folder
type this command:
Code:
python mtk w boot_a,boot_b boot.img,boot.img
and try turn on your phone.
if still can't boot try to flash one by one img from your firmware
I has your same problem. Just hold the vol- for more than your usually Need and should boot into fastboot and than you flash with flashall.bat
I've sucessfully restore my phone and work as normal.
soutaminori said:
Don't use SP Flash tool for full flash this phone seriously, Sp flash tool will make your phone stuck in recovery miui and show Nvdata Corrupted even you choose download only mode.
for now try to use mtkclient to flash boot.img only to both side A&B.
move your boot.img to mtk client folder
open cmd on that folder
type this command:
Code:
python mtk w boot_a,boot_b boot.img,boot.img
and try turn on your phone.
if still can't boot try to flash one by one img from your firmware
Click to expand...
Click to collapse
Thank you so much, it worked!!!
I think. It's now at least on the FASTBOOT screen, which is progress. And the MIUI recovery is now back as well. While the system is still unbootable, I think I can take it from here. Thank you
Hypeka said:
I has your same problem. Just hold the vol- for more than your usually Need and should boot into fastboot and than you flash with flashall.bat
I've sucessfully restore my phone and work as normal.
Click to expand...
Click to collapse
That's the first thing I tried, and no luck. But I fixed it now (I think).
Very welcome, Glad to hear that
Note for everyone:
Backup this partition it's very important.
nvcfg.img, nvdata.img, nvram.img, persist.img, proinfo.img, protect1.img, protect2.img, md1img.img
Thats all partition about imei, security and network configuration for ur device. CMIW.
mtkclient also can do that,
and it's the clue:
Code:
python mtk r nvcfg,nvdata,nvram,persist,proinfo,protect1,protect2,md1img nvcfg.img,nvdata.img,nvram.img,persist.img,proinfo.img,protect1.img,protect2.img,md1img.img
Check ur mtk client folder, now you got the back up.
u can also use this Partitions Backup & Restore this tool don,t need PC for backup and restore, but i'm not really sure can be work perfectly. i just try for boot partition and its worked.
cheeerrss
Hi. Could you help me to unbrick my Note 11S 4g? I faced with bootloop after trying rooting phone by twrp. And now i can`t enter to fastboot.
When i try to - python mtk w boot_a,boot_b boot.img,boot.img
Or when I try to disable auth brom i have another one issue.
alzhuks said:
Hi. Could you help me to unbrick my Note 11S 4g? I faced with bootloop after trying rooting phone by twrp. And now i can`t enter to fastboot.
When i try to - python mtk w boot_a,boot_b boot.img,boot.img
Or when I try to disable auth brom i have another one issue.
Click to expand...
Click to collapse
i can't see mtk client log. but maybe driver problem or try to unlock BL again with THIS TOOL
alzhuks said:
Hi. Could you help me to unbrick my Note 11S 4g? I faced with bootloop after trying rooting phone by twrp. And now i can`t enter to fastboot.
When i try to - python mtk w boot_a,boot_b boot.img,boot.img
Or when I try to disable auth brom i have another one issue.
Click to expand...
Click to collapse
I myself did it with the terminal and on Linux. I didn't use the GUI, so I can't help with that. Could you send a higher res picture of the terminal please? We can't really see anything.
If you're doing this on Windows, then my guess is a driver issue (I did have to install a special driver for Windows to work with Fastboot, could be that mtk needs it too).
Hi All,
I unbricked my phone by using fresh release of mtkclient (https://github.com/bkerler/mtkclient).
Hi there
I found a reseller for sell realme OTP for login authorized unbrick tool, and it very cheap !
Login tool website: https://www.gaprologin.com/
For cheapest price, contact first reseller on Reseller tab (i bought only 1$ for one)
There is how to unbrick your phone in EDL mode with AUTHORIZED TOOL
STEP 1: GET YOUR UNBRICK FIRMWARE & UNBRICK TOOL
For China based device: OFP A.16
Other firmware: 台湾-TW印度-IN俄罗斯-RU巴西-BR约旦-JO哈萨克斯坦-KZ乌克兰-UA乌兹别克斯坦-UZ突尼斯-TN印尼-ID泰国-TH马来西亚-MY柬埔寨-KH菲律宾-PH
英国-UK意大利-IT匈牙利-HU西班牙-ES斯洛文尼亚-SI斯洛伐克-SK塞尔维亚-SR葡萄牙-PT罗马尼亚-RO克罗地亚-HR捷克-CZ荷兰-NL芬兰-FI法国-FR德国-DE波兰-PL比利时-BE保加利亚-BG奥地利-AT
Lastest unbrick tool: FlashTool_V5.0.1
STEP 2: USE OTP FOR LOGIN UNBRICK TOOL
1. After get OTP from reseller, download login tool (in above website). Extract the login tool and unbrick tool archive. Then put the login tool in unbrick tool
2. Run the login tool, select Realme RCSM then insert OTP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Click Login, now wait for unbrick tool logged in
STEP 3: Connect phone to EDL Mode (Emergency Download mode, turn off phone hold volume + and - together and connect to computer) then do the unbrick
You can follow by this video:
EDL Testpoint (for unable to boot edl by volume button, you can also use EDL Cable for this case):
Thanks for read my post, i hope this realmeme phone will easier for develop custom rom/kernel by this method for unbrick
A donate OTP for experimental:
FF4AB5AABB4D5BA1
The login tool is detected as a virus since it is heavily obfuscated.
Rapper_skull said:
The login tool is detected as a virus since it is heavily obfuscated.
Click to expand...
Click to collapse
It do the automation, patch some memory data of official tool, since it do patching memory of other process that is why some antivirus might show it as virus
It patches the public key and host in memory that is why it show as virus in windows defender.
Here is how this works.
1. Launch the official tool and wait until it executes and show the login windows.
2. Then it patch the PublicKey and host which is used to communicate with official server. Basically I redirect its network traffic to my server.
3. Then it write the OTP into Username and Password field and click on Login button. Basically simulate the login.
That is all it does.
xuanhoang1811 said:
Hi there
I found a reseller for sell realme OTP for login authorized unbrick tool, and it very cheap !
Login tool website: https://www.gaprologin.com/
For cheapest price, contact first reseller on Reseller tab (i bought only 1$ for one)
There is how to unbrick your phone in EDL mode with AUTHORIZED TOOL
STEP 1: GET YOUR UNBRICK FIRMWARE & UNBRICK TOOL
For China based device: OFP A.16
Other firmware: 台湾-TW印度-IN俄罗斯-RU巴西-BR约旦-JO哈萨克斯坦-KZ乌克兰-UA乌兹别克斯坦-UZ突尼斯-TN印尼-ID泰国-TH马来西亚-MY柬埔寨-KH菲律宾-PH
英国-UK意大利-IT匈牙利-HU西班牙-ES斯洛文尼亚-SI斯洛伐克-SK塞尔维亚-SR葡萄牙-PT罗马尼亚-RO克罗地亚-HR捷克-CZ荷兰-NL芬兰-FI法国-FR德国-DE波兰-PL比利时-BE保加利亚-BG奥地利-AT
Lastest unbrick tool: FlashTool_V5.0.1
STEP 2: USE OTP FOR LOGIN UNBRICK TOOL
1. After get OTP from reseller, download login tool (in above website). Extract the login tool and unbrick tool archive. Then put the login tool in unbrick tool
2. Run the login tool, select Realme RCSM then insert OTP
View attachment 5834539
3. Click Login, now wait for unbrick tool logged in
View attachment 5834543
STEP 3: Connect phone to EDL Mode (Emergency Download mode, turn off phone hold volume + and - together and connect to computer) then do the unbrick
You can follow by this video:
EDL Testpoint (for unable to boot edl by volume button, you can also use EDL Cable for this case):
View attachment 5834561
Thanks for read my post, i hope this realmeme phone will easier for develop custom rom/kernel by this method for unbrick
A donate OTP for experimental:
FF4AB5AABB4D5BA1
Click to expand...
Click to collapse
If you are determined to purchase a solution you would be better off obtaining a box (NOTE: Despite the features of most allowing various ways to commit illegal acts I am proposing their use on your rightfully owned device for repairs to the original state you received it in) It would cost slightly more, but offer substantially more advanced features, and would last long enough and most cover multiple brands of device's so you could have the same peace of mind for a much longer term. I don't know if this post violates the rules so I won't name or link specifics on these beyond this.
Nckbox, or it's offshoot GSM shield can do all this without requiring opening your device, or attaching anything to it as they simply attach to your PC and operate similarly to Rom2Box.
micheal2445 said:
Nckbox, or it's offshoot GSM shield can do all this without requiring opening your device, or attaching anything to it as they simply attach to your PC and operate similarly to Rom2Box.
Click to expand...
Click to collapse
Thanks for recommend, but this is realme GT2 Pro and no 3rd tool can do the flash on this phone by EDL
You could use a deep flash otg cable alongside the aforementioned tools so long as you have or can obtain your prior firmware
I BELIEVE I may have a script to exit factory mode that may help
xuanhoang1811 said:
Thanks for recommend, but this is realme GT2 Pro and no 3rd tool can do the flash on this phone by EDL
Click to expand...
Click to collapse
A side note have you tried A. Holding up and power if fails then power up and down volumes for at least 30 seconds to see if it returns to normal or power and down to try to at least pull up fastboot mode from which fixing your issue would be substantially simpler? 2. Sounds redundant have you tried letting the battery just die and holding volume down as you plug it in and keep doing so until it stays in fastboot mode?
Check driver manager look if it's recognized and if it states Qualcomm HS-USB QDLoader 9008 or QHUSB_BULK the second Qualcomm driver would indicate an inability to identify your device.
Ultimately there are many EDL fixes and I strongly advise all methods in software before trying to open your device you'll find a hard brick is far worse than a soft which is almost always fixable
micheal2445 said:
Check driver manager look if it's recognized and if it states Qualcomm HS-USB QDLoader 9008 or QHUSB_BULK the second Qualcomm driver would indicate an inability to identify your device.
Click to expand...
Click to collapse
It's only a part to boot EDL mode, and access to flashing in this mode is another big problem
Does Fingerprint sensor work after flashing? Or it still need calibration cubes!
shivrajsingh said:
Does Fingerprint sensor work after flashing? Or it still need calibration cubes!
Click to expand...
Click to collapse
No if you don't flash persist
xuanhoang1811 said:
Hi there
I found a reseller for sell realme OTP for login authorized unbrick tool, and it very cheap !
Login tool website: https://www.gaprologin.com/
For cheapest price, contact first reseller on Reseller tab (i bought only 1$ for one)
There is how to unbrick your phone in EDL mode with AUTHORIZED TOOL
STEP 1: GET YOUR UNBRICK FIRMWARE & UNBRICK TOOL
For China based device: OFP A.16
Other firmware: 台湾-TW印度-IN俄罗斯-RU巴西-BR约旦-JO哈萨克斯坦-KZ乌克兰-UA乌兹别克斯坦-UZ突尼斯-TN印尼-ID泰国-TH马来西亚-MY柬埔寨-KH菲律宾-PH
英国-UK意大利-IT匈牙利-HU西班牙-ES斯洛文尼亚-SI斯洛伐克-SK塞尔维亚-SR葡萄牙-PT罗马尼亚-RO克罗地亚-HR捷克-CZ荷兰-NL芬兰-FI法国-FR德国-DE波兰-PL比利时-BE保加利亚-BG奥地利-AT
Lastest unbrick tool: FlashTool_V5.0.1
STEP 2: USE OTP FOR LOGIN UNBRICK TOOL
1. After get OTP from reseller, download login tool (in above website). Extract the login tool and unbrick tool archive. Then put the login tool in unbrick tool
2. Run the login tool, select Realme RCSM then insert OTP
View attachment 5834539
3. Click Login, now wait for unbrick tool logged in
View attachment 5834543
STEP 3: Connect phone to EDL Mode (Emergency Download mode, turn off phone hold volume + and - together and connect to computer) then do the unbrick
You can follow by this video:
EDL Testpoint (for unable to boot edl by volume button, you can also use EDL Cable for this case):
View attachment 5834561
Thanks for read my post, i hope this realmeme phone will easier for develop custom rom/kernel by this method for unbrick
A donate OTP for experimental:
FF4AB5AABB4D5BA1
Click to expand...
Click to collapse
My device unable to boot edl by volume button as it black screen and wont charge + detect by USB, so can also use EDL Cable for this case? Any EDL cable like those sold online for XiaoMi EDL cable? Please advice, urgent.
jbhlaw78 said:
My device unable to boot edl by volume button as it black screen and wont charge + detect by USB, so can also use EDL Cable for this case? Any EDL cable like those sold online for XiaoMi EDL cable? Please advice, urgent.
Click to expand...
Click to collapse
You can use xiaomi edl cable for this phone, i tested
xuanhoang1811 said:
You can use xiaomi edl cable for this phone, i tested
Click to expand...
Click to collapse
You use the EDL cable same with my case, black screen + wont charge + not detect by USB too?
Press the EDL cable button and phone power button, then just connect cable to phone right?
jbhlaw78 said:
You use the EDL cable same with my case, black screen + wont charge + not detect by USB too?
Press the EDL cable button and phone power button, then just connect cable to phone right?
Click to expand...
Click to collapse
Just connect, doesn't need to press any button
Explaining how it happened ; I tried to unlock the bootloader of my redmi note 11s 5g using another cellphone, I thought it wouldnt be such a bad idea, but my phone at the boot started to have the following error; dm verity corruption. I did not use my pc because at the time it was being fixed. I tried to use xiaomi unlock tool to unlock the bootloader to flash another rom to unbrick my device, but I was having a lot of errors with my mi account; it had to be connected at my device, but how tf I connect a mi account to a device with no system? My phone is mediatek, and I tried to unlock using mtkclient, but did not work, I can send to you guys logs with all the process I tried.
marsiomisterios said:
Explaining how it happened ; I tried to unlock the bootloader of my redmi note 11s 5g using another cellphone, I thought it wouldnt be such a bad idea, but my phone at the boot started to have the following error; dm verity corruption. I did not use my pc because at the time it was being fixed. I tried to use xiaomi unlock tool to unlock the bootloader to flash another rom to unbrick my device, but I was having a lot of errors with my mi account; it had to be connected at my device, but how tf I connect a mi account to a device with no system? My phone is mediatek, and I tried to unlock using mtkclient, but did not work, I can send to you guys logs with all the process I tried.
Click to expand...
Click to collapse
5g?
marsiomisterios said:
Explaining how it happened ; I tried to unlock the bootloader of my redmi note 11s 5g using another cellphone, I thought it wouldnt be such a bad idea, but my phone at the boot started to have the following error; dm verity corruption. I did not use my pc because at the time it was being fixed. I tried to use xiaomi unlock tool to unlock the bootloader to flash another rom to unbrick my device, but I was having a lot of errors with my mi account; it had to be connected at my device, but how tf I connect a mi account to a device with no system? My phone is mediatek, and I tried to unlock using mtkclient, but did not work, I can send to you guys logs with all the process I tried.
Click to expand...
Click to collapse
btw, refer to this guide
(MTK) UNLOCK BOOTLOADER WITHOUT WAITING A WEEK
Hey! (PROBABLY) WORKS ON ALL MTK DEVICES This is my first thread so pls don't eat me if something has been written wrong I found a method, that allows you unlock bootloader without xiaomi unlocking software. Now, you don't need to wait 168...
forum.xda-developers.com
when you boot your phone, what happens? is it showing mi logo?
BloxetPL said:
when you boot your phone, what happens? is it showing mi logo?
Click to expand...
Click to collapse
yes the mi logo is showing, the fastboot and the recovery is intact
marsiomisterios said:
yes the mi logo is showing, the fastboot and the recovery is intact
Click to expand...
Click to collapse
Try to flash miui via brom mode in sp flash tool. Tomorrow i will send you some links to the software and tutorial
marsiomisterios said:
yes the mi logo is showing, the fastboot and the recovery is intact
Click to expand...
Click to collapse
How to Unbrick Xiaomi Preloader and Unlock bootloader for Xiaomi Redmi 12c ( without using the mi unlock-tool) and for any MTK Redmi or Device (MTK)
Recently i hard bricked my newly released and bought Xiaomi Redmi 12c (earth) and it was a hard brick i mistakenly flashed preloader ( with sp flash-tool) while trying to unbrick it when it was still in a soft brick, so i didn't know what to do i...
forum.xda-developers.com
BloxetPL said:
Try to flash miui via brom mode in sp flash tool. Tomorrow i will send you some links to the software and tutorial
Click to expand...
Click to collapse
https://sourceforge.net/projects/fleur/files/UNBRICK/SP Flash Tool/ <----- spflash tool( YOU HAVE TO USE THIS VERSION, OTHERS WON'T WORK )
https://miuirom.org/phones/redmi-note-11s <------ here you can download miui rom (Download Fastboot ROM)
https://sourceforge.net/projects/fleur/files/UNBRICK/Drivers/ <----- DRIVERS (THE MOST IMPORTANT THING)
That's all.
REQUIREMENTS:
1. Patience
2. Brain
3. UNLOCKED bootloader
STEPS:
Download given software that is linked above
Unpack both anywhere you want (you have to unpack fastboot rom until it will be a folder)
Run SP Flash tool
Go to Options > Option > Connection > In USB section, click Full Speed
Leave options
Click Bypass Auth
Choose scatter-loading file (it's in miui rom folder inside images) it should be named MT6781_Android_scatter or MT6781_Android_scatter.txt
Click Download
Press both 3 buttons ( VOL+ VOL- & POWER ) and connect USB Cable
SP Flash tool should start now.
Wait until flash is done.
When it's done, disconnect phone and press power button until xiaomi logo appears on screen
That's it, your phone is now unbricked
Video tutorial:
I've attached 2 videos, on first video an error appeared, so i had to flash it again.
part 1: https://mega.nz/file/5xhz1KTL#RTfiiFLCGEKXK125esOcZdbCIGpAJWJlDl1Hvqzsubw
part 2: https://mega.nz/file/NgJQ0IzR#sqUTQ2vIY83gxb8gc8KDb3WozYXZj1mcco-QcM1uehU
https://sourceforge.net/projects/fleur/files/UNBRICK/SP Flash Tool/ <----- spflash tool( YOU HAVE TO USE THIS VERSION, OTHERS WON'T WORK )
BloxetPL said:
https://miuirom.org/phones/redmi-note-11s <------ here you can download miui rom (Download Fastboot ROM)
https://sourceforge.net/projects/fleur/files/UNBRICK/Drivers/ <----- DRIVERS (THE MOST IMPORTANT THING)
That's all.
REQUIREMENTS:
1. Patience
2. Brain
3. UNLOCKED bootloader
STEPS:
Download given software that is linked above
Unpack both anywhere you want (you have to unpack fastboot rom until it will be a folder)
Run SP Flash tool
Go to Options > Option > Connection > In USB section, click Full Speed
Leave options
Click Bypass Auth
Choose scatter-loading file (it's in miui rom folder inside images) it should be named MT6781_Android_scatter or MT6781_Android_scatter.txt
Click Download
Press both 3 buttons ( VOL+ VOL- & POWER ) and connect USB Cable
SP Flash tool should start now.
Wait until flash is done.
When it's done, disconnect phone and press power button until xiaomi logo appears on screen
That's it, your phone is now unbricked
Video tutorial:
I've attached 2 videos, on first video an error appeared, so i had to flash it again.
part 1: https://mega.nz/file/5xhz1KTL#RTfiiFLCGEKXK125esOcZdbCIGpAJWJlDl1Hvqzsubw
part 2: https://mega.nz/file/NgJQ0IzR#sqUTQ2vIY83gxb8gc8KDb3WozYXZj1mcco-QcM1uehU
Click to expand...
Click to collapse
I tried to flash it but I got this error;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried even to use bypass tool utility https://github.com/MTK-bypass/bypass_utility with exploits collection https://github.com/MTK-bypass/exploits_collection to disable secure boot on my device but it didn't work. I dont what else to do. I'm running out of options.
Gudaji said:
How to Unbrick Xiaomi Preloader and Unlock bootloader for Xiaomi Redmi 12c ( without using the mi unlock-tool) and for any MTK Redmi or Device (MTK)
Recently i hard bricked my newly released and bought Xiaomi Redmi 12c (earth) and it was a hard brick i mistakenly flashed preloader ( with sp flash-tool) while trying to unbrick it when it was still in a soft brick, so i didn't know what to do i...
forum.xda-developers.com
Click to expand...
Click to collapse
after trying this command my phone is without recovery but the fastboot is intact
Updating the thread; I successfully unlocked the bootloader and now the plan is to flash TWRP to my recovery to install the rom
BloxetPL said:
5g?
Click to expand...
Click to collapse
yes
BloxetPL said:
btw, refer to this guide
(MTK) UNLOCK BOOTLOADER WITHOUT WAITING A WEEK
Hey! (PROBABLY) WORKS ON ALL MTK DEVICES This is my first thread so pls don't eat me if something has been written wrong I found a method, that allows you unlock bootloader without xiaomi unlocking software. Now, you don't need to wait 168...
forum.xda-developers.com
Click to expand...
Click to collapse
yes I used this guide to unlock my bootloader
marsiomisterios said:
yes I used this guide to unlock my bootloader
Click to expand...
Click to collapse
Then flash stock rom with miflash
Gudaji said:
Then flash stock rom with miflash
Click to expand...
Click to collapse
I can't it's glitched my bootloader is unlocked but on mi flash it says it isn't