Hi there
I found a reseller for sell realme OTP for login authorized unbrick tool, and it very cheap !
Login tool website: https://www.gaprologin.com/
For cheapest price, contact first reseller on Reseller tab (i bought only 1$ for one)
There is how to unbrick your phone in EDL mode with AUTHORIZED TOOL
STEP 1: GET YOUR UNBRICK FIRMWARE & UNBRICK TOOL
For China based device: OFP A.16
Other firmware: 台湾-TW印度-IN俄罗斯-RU巴西-BR约旦-JO哈萨克斯坦-KZ乌克兰-UA乌兹别克斯坦-UZ突尼斯-TN印尼-ID泰国-TH马来西亚-MY柬埔寨-KH菲律宾-PH
英国-UK意大利-IT匈牙利-HU西班牙-ES斯洛文尼亚-SI斯洛伐克-SK塞尔维亚-SR葡萄牙-PT罗马尼亚-RO克罗地亚-HR捷克-CZ荷兰-NL芬兰-FI法国-FR德国-DE波兰-PL比利时-BE保加利亚-BG奥地利-AT
Lastest unbrick tool: FlashTool_V5.0.1
STEP 2: USE OTP FOR LOGIN UNBRICK TOOL
1. After get OTP from reseller, download login tool (in above website). Extract the login tool and unbrick tool archive. Then put the login tool in unbrick tool
2. Run the login tool, select Realme RCSM then insert OTP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Click Login, now wait for unbrick tool logged in
STEP 3: Connect phone to EDL Mode (Emergency Download mode, turn off phone hold volume + and - together and connect to computer) then do the unbrick
You can follow by this video:
EDL Testpoint (for unable to boot edl by volume button, you can also use EDL Cable for this case):
Thanks for read my post, i hope this realmeme phone will easier for develop custom rom/kernel by this method for unbrick
A donate OTP for experimental:
FF4AB5AABB4D5BA1
The login tool is detected as a virus since it is heavily obfuscated.
Rapper_skull said:
The login tool is detected as a virus since it is heavily obfuscated.
Click to expand...
Click to collapse
It do the automation, patch some memory data of official tool, since it do patching memory of other process that is why some antivirus might show it as virus
It patches the public key and host in memory that is why it show as virus in windows defender.
Here is how this works.
1. Launch the official tool and wait until it executes and show the login windows.
2. Then it patch the PublicKey and host which is used to communicate with official server. Basically I redirect its network traffic to my server.
3. Then it write the OTP into Username and Password field and click on Login button. Basically simulate the login.
That is all it does.
xuanhoang1811 said:
Hi there
I found a reseller for sell realme OTP for login authorized unbrick tool, and it very cheap !
Login tool website: https://www.gaprologin.com/
For cheapest price, contact first reseller on Reseller tab (i bought only 1$ for one)
There is how to unbrick your phone in EDL mode with AUTHORIZED TOOL
STEP 1: GET YOUR UNBRICK FIRMWARE & UNBRICK TOOL
For China based device: OFP A.16
Other firmware: 台湾-TW印度-IN俄罗斯-RU巴西-BR约旦-JO哈萨克斯坦-KZ乌克兰-UA乌兹别克斯坦-UZ突尼斯-TN印尼-ID泰国-TH马来西亚-MY柬埔寨-KH菲律宾-PH
英国-UK意大利-IT匈牙利-HU西班牙-ES斯洛文尼亚-SI斯洛伐克-SK塞尔维亚-SR葡萄牙-PT罗马尼亚-RO克罗地亚-HR捷克-CZ荷兰-NL芬兰-FI法国-FR德国-DE波兰-PL比利时-BE保加利亚-BG奥地利-AT
Lastest unbrick tool: FlashTool_V5.0.1
STEP 2: USE OTP FOR LOGIN UNBRICK TOOL
1. After get OTP from reseller, download login tool (in above website). Extract the login tool and unbrick tool archive. Then put the login tool in unbrick tool
2. Run the login tool, select Realme RCSM then insert OTP
View attachment 5834539
3. Click Login, now wait for unbrick tool logged in
View attachment 5834543
STEP 3: Connect phone to EDL Mode (Emergency Download mode, turn off phone hold volume + and - together and connect to computer) then do the unbrick
You can follow by this video:
EDL Testpoint (for unable to boot edl by volume button, you can also use EDL Cable for this case):
View attachment 5834561
Thanks for read my post, i hope this realmeme phone will easier for develop custom rom/kernel by this method for unbrick
A donate OTP for experimental:
FF4AB5AABB4D5BA1
Click to expand...
Click to collapse
If you are determined to purchase a solution you would be better off obtaining a box (NOTE: Despite the features of most allowing various ways to commit illegal acts I am proposing their use on your rightfully owned device for repairs to the original state you received it in) It would cost slightly more, but offer substantially more advanced features, and would last long enough and most cover multiple brands of device's so you could have the same peace of mind for a much longer term. I don't know if this post violates the rules so I won't name or link specifics on these beyond this.
Nckbox, or it's offshoot GSM shield can do all this without requiring opening your device, or attaching anything to it as they simply attach to your PC and operate similarly to Rom2Box.
micheal2445 said:
Nckbox, or it's offshoot GSM shield can do all this without requiring opening your device, or attaching anything to it as they simply attach to your PC and operate similarly to Rom2Box.
Click to expand...
Click to collapse
Thanks for recommend, but this is realme GT2 Pro and no 3rd tool can do the flash on this phone by EDL
You could use a deep flash otg cable alongside the aforementioned tools so long as you have or can obtain your prior firmware
I BELIEVE I may have a script to exit factory mode that may help
xuanhoang1811 said:
Thanks for recommend, but this is realme GT2 Pro and no 3rd tool can do the flash on this phone by EDL
Click to expand...
Click to collapse
A side note have you tried A. Holding up and power if fails then power up and down volumes for at least 30 seconds to see if it returns to normal or power and down to try to at least pull up fastboot mode from which fixing your issue would be substantially simpler? 2. Sounds redundant have you tried letting the battery just die and holding volume down as you plug it in and keep doing so until it stays in fastboot mode?
Check driver manager look if it's recognized and if it states Qualcomm HS-USB QDLoader 9008 or QHUSB_BULK the second Qualcomm driver would indicate an inability to identify your device.
Ultimately there are many EDL fixes and I strongly advise all methods in software before trying to open your device you'll find a hard brick is far worse than a soft which is almost always fixable
micheal2445 said:
Check driver manager look if it's recognized and if it states Qualcomm HS-USB QDLoader 9008 or QHUSB_BULK the second Qualcomm driver would indicate an inability to identify your device.
Click to expand...
Click to collapse
It's only a part to boot EDL mode, and access to flashing in this mode is another big problem
Does Fingerprint sensor work after flashing? Or it still need calibration cubes!
shivrajsingh said:
Does Fingerprint sensor work after flashing? Or it still need calibration cubes!
Click to expand...
Click to collapse
No if you don't flash persist
xuanhoang1811 said:
Hi there
I found a reseller for sell realme OTP for login authorized unbrick tool, and it very cheap !
Login tool website: https://www.gaprologin.com/
For cheapest price, contact first reseller on Reseller tab (i bought only 1$ for one)
There is how to unbrick your phone in EDL mode with AUTHORIZED TOOL
STEP 1: GET YOUR UNBRICK FIRMWARE & UNBRICK TOOL
For China based device: OFP A.16
Other firmware: 台湾-TW印度-IN俄罗斯-RU巴西-BR约旦-JO哈萨克斯坦-KZ乌克兰-UA乌兹别克斯坦-UZ突尼斯-TN印尼-ID泰国-TH马来西亚-MY柬埔寨-KH菲律宾-PH
英国-UK意大利-IT匈牙利-HU西班牙-ES斯洛文尼亚-SI斯洛伐克-SK塞尔维亚-SR葡萄牙-PT罗马尼亚-RO克罗地亚-HR捷克-CZ荷兰-NL芬兰-FI法国-FR德国-DE波兰-PL比利时-BE保加利亚-BG奥地利-AT
Lastest unbrick tool: FlashTool_V5.0.1
STEP 2: USE OTP FOR LOGIN UNBRICK TOOL
1. After get OTP from reseller, download login tool (in above website). Extract the login tool and unbrick tool archive. Then put the login tool in unbrick tool
2. Run the login tool, select Realme RCSM then insert OTP
View attachment 5834539
3. Click Login, now wait for unbrick tool logged in
View attachment 5834543
STEP 3: Connect phone to EDL Mode (Emergency Download mode, turn off phone hold volume + and - together and connect to computer) then do the unbrick
You can follow by this video:
EDL Testpoint (for unable to boot edl by volume button, you can also use EDL Cable for this case):
View attachment 5834561
Thanks for read my post, i hope this realmeme phone will easier for develop custom rom/kernel by this method for unbrick
A donate OTP for experimental:
FF4AB5AABB4D5BA1
Click to expand...
Click to collapse
My device unable to boot edl by volume button as it black screen and wont charge + detect by USB, so can also use EDL Cable for this case? Any EDL cable like those sold online for XiaoMi EDL cable? Please advice, urgent.
jbhlaw78 said:
My device unable to boot edl by volume button as it black screen and wont charge + detect by USB, so can also use EDL Cable for this case? Any EDL cable like those sold online for XiaoMi EDL cable? Please advice, urgent.
Click to expand...
Click to collapse
You can use xiaomi edl cable for this phone, i tested
xuanhoang1811 said:
You can use xiaomi edl cable for this phone, i tested
Click to expand...
Click to collapse
You use the EDL cable same with my case, black screen + wont charge + not detect by USB too?
Press the EDL cable button and phone power button, then just connect cable to phone right?
jbhlaw78 said:
You use the EDL cable same with my case, black screen + wont charge + not detect by USB too?
Press the EDL cable button and phone power button, then just connect cable to phone right?
Click to expand...
Click to collapse
Just connect, doesn't need to press any button
Related
Hy everyone, I am in this situation since last Friday. Read and tried many guides and tutorials without luck. Here is my situation:
- I have the MEG7 version, I'm in south america. I don't know which version of MIUI I had before the brick (maybe a global fake one?), the phone was working excellent. Friday appears an OTA update of 225 mb, download and executed. After that the phone stucks in a bootloop, just the MI logo, powered by android appears a second and restart.
- Read guides and forums, then I did the test point according to knowhows.net/fix-xiaomi-redmi-5-plus-fake-rom-boot-loop on a 64 bit win10 laptop. The pc recognized the COM qualcomm port, I used the latest miflash 7.4.25.
flashed success stable cn rom but accidentally chose the "flash all and lock" option -> bootloop remains
flashed success dev cn rom -> bootloop remains
flashed success stable global rom -> bootloop remains
flashed success dev global rom -> bootloop remains :crying:
Tried other tools I read in miui forums, like XiaoMiTool, downloaded both china roms (global were not available, maybe due the mi site update?), the bootloop remains.
Keep reading, tried with the beta version of miflash, the proccess was endless, not luck.
Tried with and old miflash version 2016.08.30, the proccess end successfully but bootloop remains.
At this point didn't know what to do, tried to flash with miflash but with the device in fastboot mode, a "flash modem error" appears just 3 second after the start. Perhaps this error can give some clues of the real problem? :crying:
Now I'm starting to get frustrated. Could be the pc? I just have my laptop. If nothing works will borrow a win 7 32 bit pc. I used two usb cables to try luck, no luck. But, which is the correct rom to flash? the global or the china stable? I read can't flash dev roms with locked bootloader.
I tried almost everything, will preciate your kind help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I guess that the successive flashings after relock bootloader were not really sucessfull.
When you using method point what you did after that? tried with miflash tool or miphone flash tool? so miflash tool don´t work in edl (download) mode, it is for fastboot mode.
Try enter to recovery with pwr + vol up and when appears logo mibunny release pwr button and do a format data and see what happens
MEG7 with locked bootloader needs global rom, not China one, stable or dev doesn't matter.
unlock your bootloader. altough your phone is bootloped. my situations is 100% same as yours. i spent lot of roms also. untill i try unlock (bootlooped phone) but succes. try it bro i hope succes. after succes you can flash into EDL mode and the phone booting normally.
SubwayChamp said:
I guess that the successive flashings after relock bootloader were not really sucessfull.
When you using method point what you did after that? tried with miflash tool or miphone flash tool? so miflash tool don´t work in edl (download) mode, it is for fastboot mode.
Try enter to recovery with pwr + vol up and when appears logo mibunny release pwr button and do a format data and see what happens
Click to expand...
Click to collapse
I did test point with Miflash tool, all the guides I read uses that tool, is it possible with another?
the miphonemanager I have installed I think is from MiPc suite. Just installed, didn't use it.
I enter to recovery mode and wipe data too. Unfortunately it's the same.
Thanks for your suggestion.
rokurobanne said:
unlock your bootloader. altough your phone is bootloped. my situations is 100% same as yours. i spent lot of roms also. untill i try unlock (bootlooped phone) but succes. try it bro i hope succes. after succes you can flash into EDL mode and the phone booting normally.
Click to expand...
Click to collapse
How I unlock the bootloader can you help me? I tried in a simple naive way with adb command fastboot oem unlock, but some with the token I don't have appears. How did you do? I think all my problems are because the locked bootloader.
Thanks for your help.
jes0411 said:
MEG7 with locked bootloader needs global rom, not China one, stable or dev doesn't matter.
Click to expand...
Click to collapse
Yes. I read one guide about that After to understand it, I flashed two global stable roms
- vince_global_images_V9.5.11.0.NEGMIFA_20180521.0000.00_7.1_global
- vince_global_images_V9.2.6.0.NEGMIEK_20180122.0000.00_7.1_global
I did the proccess succesfully, at least the miflash shows that.
But after the reboot, the device stops in "powered by android" and reboot again
cristhian7cz said:
How I unlock the bootloader can you help me? I tried in a simple naive way with adb command fastboot oem unlock, but some with the token I don't have appears. How did you do? I think all my problems are because the locked bootloader.
Thanks for your help.
Click to expand...
Click to collapse
Xiaomi cannot unlock with that script bro.
Unlock it with miuiunlock tool. download it officially.
enter fastboot then unlock it. hope you luck.:good:
cristhian7cz said:
I did test point with Miflash tool, all the guides I read uses that tool, is it possible with another?
the miphonemanager I have installed I think is from MiPc suite. Just installed, didn't use it.
I enter to recovery mode and wipe data too. Unfortunately it's the same.
Thanks for your suggestion.
Click to expand...
Click to collapse
First of all try to unlock bootloader, follow this tutorial and download Xiaomi Unlock tool from here: https://www.xiaomigeek.com/download-mi-flash-unlock-tool.html I´m not sure if this works if you didn´t linked before a miaccount onto your device and didn´t enable USB debugging and OEM unlock before.
MiFlash tool from here https://www.xiaomigeek.com/download-xiaomi-mi-flash-tool.html works in fastboot mode.
MiPhone flash tool from here http://chinagadgetsreviews.blogspot.com/2015/11/download-miphone-tools-for-flashing.html works in edl/download mode.
If you can´t unlock bootloader then you can try with MiPhone flash tool, to get in edl mode you have to first of all download and install the drivers for this method from here https://www.androidgyd.com/qualcomm-hs-usb-qdloader-9008-driver.html and open device manager from pc so your device has to be detected like qualcomm HS-USB qdloader 9008 and there are three methods as far I know to enter in download mode although one or more couldn´t eventually work:
- Pressing the three buttons at same time to connect to pc you have to get a short vibration then release inmediately.
- Second method trying to avoid to open backcover of device, search or made by your own a "cable edl" it´s not so difficult to do it (just youtube)
- Test point method is the last resort.
MiPhone flash tool works both unlocked or locked devices.
SubwayChamp said:
First of all try to unlock bootloader, follow this tutorial and download Xiaomi Unlock tool from here: https://www.xiaomigeek.com/download-mi-flash-unlock-tool.html I´m not sure if this works if you didn´t linked before a miaccount onto your device and didn´t enable USB debugging and OEM unlock before.
MiFlash tool from here https://www.xiaomigeek.com/download-xiaomi-mi-flash-tool.html works in fastboot mode.
MiPhone flash tool from here http://chinagadgetsreviews.blogspot.com/2015/11/download-miphone-tools-for-flashing.html works in edl/download mode.
If you can´t unlock bootloader then you can try with MiPhone flash tool, to get in edl mode you have to first of all download and install the drivers for this method from here https://www.androidgyd.com/qualcomm-hs-usb-qdloader-9008-driver.html and open device manager from pc so your device has to be detected like qualcomm HS-USB qdloader 9008 and there are three methods as far I know to enter in download mode although one or more couldn´t eventually work:
- Pressing the three buttons at same time to connect to pc you have to get a short vibration then release inmediately.
- Second method trying to avoid to open backcover of device, search or made by your own a "cable edl" it´s not so difficult to do it (just youtube)
- Test point method is the last resort.
MiPhone flash tool works both unlocked or locked devices.
Click to expand...
Click to collapse
Wow, you gave me new ideas to try, really really thanks. Didn't know about miphone flash tool. I'll use tonight.
- When I did the test point the pc recognized the device in the COM ports, as a qualcomm hs-usb 9008, as I know, when this happens the phone is in EDL mode right?
- I have tried to unlock BL with the official tool too, but couldn't because of the device was not binded to my account. Anyway I have found this thread http://en.miui.com/thread-246705-1-1.html with some info I didn't know, about kedacom driver and disconecting internet, don't know if will work but I will give a try.
If I have luck I will let you know
rokurobanne said:
Xiaomi cannot unlock with that script bro.
Unlock it with miuiunlock tool. download it officially.
enter fastboot then unlock it. hope you luck.:good:
Click to expand...
Click to collapse
Was your phone previousily binded to your device? I mean, did you do all the procces waiting the hours to unlock?
cristhian7cz said:
Was your phone previousily binded to your device? I mean, did you do all the procces waiting the hours to unlock?
Click to expand...
Click to collapse
No. my phone was botlooped and only Mi loading. but i try to unlock via fastboot. lucky success
rokurobanne said:
No. my phone was botlooped and only Mi loading. but i try to unlock via fastboot. lucky success
Click to expand...
Click to collapse
Not luck to me, I have signed in mi web, downloaded the official mi unlock, entered the phone in fastboot and run the software...no luck :/
cristhian7cz said:
Not luck to me, I have signed in mi web, downloaded the official mi unlock, entered the phone in fastboot and run the software...no luck :/
Click to expand...
Click to collapse
ohh Sad to see that bro. i give up
SubwayChamp said:
First of all try to unlock bootloader, follow this tutorial and download Xiaomi Unlock tool from here: https://www.xiaomigeek.com/download-mi-flash-unlock-tool.html I´m not sure if this works if you didn´t linked before a miaccount onto your device and didn´t enable USB debugging and OEM unlock before.
MiFlash tool from here https://www.xiaomigeek.com/download-xiaomi-mi-flash-tool.html works in fastboot mode.
MiPhone flash tool from here http://chinagadgetsreviews.blogspot.com/2015/11/download-miphone-tools-for-flashing.html works in edl/download mode.
If you can´t unlock bootloader then you can try with MiPhone flash tool, to get in edl mode you have to first of all download and install the drivers for this method from here https://www.androidgyd.com/qualcomm-hs-usb-qdloader-9008-driver.html and open device manager from pc so your device has to be detected like qualcomm HS-USB qdloader 9008 and there are three methods as far I know to enter in download mode although one or more couldn´t eventually work:
- Pressing the three buttons at same time to connect to pc you have to get a short vibration then release inmediately.
- Second method trying to avoid to open backcover of device, search or made by your own a "cable edl" it´s not so difficult to do it (just youtube)
- Test point method is the last resort.
MiPhone flash tool works both unlocked or locked devices.
Click to expand...
Click to collapse
After a few hours I tried the suggestions.
1.- Downloaded the MIFLASH UNLOCK tool from the mi web, tried to unlocl the BL, not success "account is not bound to device"
2.- Downloaded MIPHONE TOOL, I saw is similar to Miflash, but the last Miphone of the link is from 2014, nevertheless I tried with the device in EDL (with test point and the COM port), gave me this error:
"insufficient storage space to process this command :crying:
I observed that MiFlash works in EDL too, I mean, doing the test point recognize the device in the COM port too.
Also, I tried to flash a Global Rom with MiFlash but this time in fastboot, the device is recognized with many numbers. But I get this error:
At this point I really don't know what to do.
I guess I need to find a way to unlock the bootloader without bound account to the device.
Could this be useful? Before the brick, I added my Mi account in the device and I still can see it in Mi Cloud web:
Maybe I can contact xiaomi customer support and ask them to give me the permission to unlock the device.
I won't give up!
cristhian7cz said:
After a few hours I tried the suggestions.
1.- Downloaded the MIFLASH UNLOCK tool from the mi web, tried to unlocl the BL, not success "account is not bound to device"
2.- Downloaded MIPHONE TOOL, I saw is similar to Miflash, but the last Miphone of the link is from 2014, nevertheless I tried with the device in EDL (with test point and the COM port), gave me this error:
"insufficient storage space to process this command :crying:
I observed that MiFlash works in EDL too, I mean, doing the test point recognize the device in the COM port too.
Also, I tried to flash a Global Rom with MiFlash but this time in fastboot, the device is recognized with many numbers. But I get this error:
At this point I really don't know what to do.
I guess I need to find a way to unlock the bootloader without bound account to the device.
Could this be useful? Before the brick, I added my Mi account in the device and I still can see it in Mi Cloud web:
Maybe I can contact xiaomi customer support and ask them to give me the permission to unlock the device.
I won't give up!
Click to expand...
Click to collapse
Here three things that you should try; other version of MiPhone tool, flash directly twrp, begin and wait the unlock process......
1- As far I know MiFlash tool doesn´t work in edl mode, just recognices device. Here you have a version from 2016 of MiPhone tool https://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401 you have to set the path to your firmware folder next to "browser" box upper left there is an option to configure the files (prog_emmc_firehose_8953_ddr.mbn, patch0.xml, rawprogram0.xml) that are needed to flash the rom.
2 - Also, you can move all the rest of files and put only recovery (custom twrp) and after flash some custom rom from twrp, there are some threads explaining this process.
3 - To unlock bootloader you have to begin a process, put your sim onto other device and request to Xiaomi with this number and you should have to wait for the process, read carefully the thread specially the first steps https://forum.xda-developers.com/redmi-note-5/how-to/how-to-how-to-unlock-redmi-5-plus-t3750250
btw guys what should i use dev version to get weekly update OTA?
squall888 said:
btw guys what should i use dev version to get weekly update OTA?
Click to expand...
Click to collapse
Yes, the dev rom receive weekly updates.
Time of flashing
Does anyone know how much is the average time to flash with miflash or miphone? In my notebook, win10 64 bit, dual core takes 700 - 900 seconds. I see in other images that finishes in 100 - 200 sec.
I have same problem like you in my MEG7
:crying:
Hello to everybody.
Dear friends I post this to guide (only unlocked bootloader rooted phones) you through the steps that I used to succesfully recover my Xiaomi M9T
from a hard brick (by that time only edl mode was available).
Since Xiaomi has decided to lock down their Mi flash tool, and only special authorized accounts have an access to their utility tool.
was almost impossible (by yourself) to recover your phone from a hard brick situation.
I found a way arround to xiaomi tool with a 100% succesfull 1st atempt with my own phone it worked flawlessly.
Forget the point to point jumbers with a required open phone procedure.
Forget the authorized account holders with a teamviewer use of your computer and a fee for their services (logical).
Forget returning back your phone to any authorized repair center for a revival for what ever cost.
Below you will find al the steps one by one.
First thing you need is to install: minimal_adb_fastboot_v1.4.3_setup. https://forum.xda-developers.com/showthread.php?t=2317790.
Run it and put "Y" and hit enter all the way through.
Second you need to install: TOOL_ALL_IN_ONE_2.0.1.1. https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Press tab advance options.
under the advance options window press first the tab Set ADB and fastboot privileges system wide.
It will asc you for confirmation press the tab again with the same Set ADB and fastboot privileges system wide.
Then press the tab Open a free terminal with ADB and fastboot privileges.
and type in the terminal the cmd fastboot oem edl,
It will say ADB boot oem edl OK. (unforunatelly I have no screen print from this one).
You will know at once because your phone goes from fastboot (bunny) screen to black screen and enters edl mode, is normal do not be alarmed.
In your computer you will see now under setting> devices> Qualcomm HS-USB QDLoader 9008. That is a good thing you are now in edl mode.
From there go back to already running all in one tool.
Press the tab Flash Factory images, you will go to the respective screen (below).
Select Flash all, and press the download factory image china.
Immediately will redirect you by a pop up window to the chinese site of the MIUI.
Scroll down and you will come across the Redmi K20 rom, downloaded and save it to your desktop.
Once is done decompress twice from tgz. file, to tar. file, to ready to flash rom file.
Now come back to all in one tool, and select the rom from the browsing tab, go to the desktop folder where you have previously download the roam and select the ready to flash (unzipep file) once is loaded hit flash Rom and seat back.
The ADB terminal will start the flashing procedure you will know from the very beggining if everything is normal,
Because the terminal shows the file is being prossesed and the time for each action with a followed OK
During the procedure it will break up between two or three stages of the flashing, momentarily again do not be alarmed.
If everything goes well the operation will finish with a gorgeous redmi bootup logo.
(once again I apologize no screen shot taken in advance for this step)
It will finally bootup to system, allthough it might not, But one more time do not be worried, officially you have succeded reviving your hard bricked phone.
From there if is not completing bootup simply press volume up+power botton and you have the official recovery, (in chinese of course) but you can easily
find an image with the english tab designation, hit wipe data, and reboot again, voila there you are back in bussiness.
All the gredits go to the developers of the above used tools, since I just was lucky enough to find the way through.
Good luck to all Mi9T/K20 xiaomi owners with your phone revival process.
Best regards to all of you.
P.S.
Forgive my English for any syntax or grammar errors.
I wish I had more time to spend for a more comprehensive guide.
Works for k20 pro aswell?
hrdlw said:
Works for k20 pro aswell?
Click to expand...
Click to collapse
Hi there I have not tried since I have only Mi 9T.
But yes, I am sure pretty much is the same think, instead of downloading the K20 rom, simply download the K20 pro one,
I wish you a good revival.
wow, this is too good to be true ? hope it will works for ppl who have brick. thanks
Awesome news, THX
Thank you for providing us an alternative way of reviving hard bricked devices. I hope this also fix similar problems but with a locked bootloader.
btw can i just unlock bootloader easily from this tool?
@Fantomduck Wait wait, i missread in your post "(only for unlocked bootloader)" So this is tutorial for those who have already unlocked bootloader to unbrick device or what? im confused now... bcs if we have unlocked bootloader there is no point to do this steps u described then, we can simply flash any stock rom on unlocked bl and unbrick drvice.
Yeah from what I understand, it basically flash the rom via EDL mode, but for unlocked bootloader. But why bother with EDL when the bootloader already unlocked? Also, I thought we can only flash ROM via EDL with authenticated tokens?
If this app can flash rom via EDL without special authentication, it should works for both unlocked and locked bootloader, though it might be different for Mi 9T Pro.
Very interesting nevertheless.
Hello again,
Just a clarification regarding, "I tried one more ultimate time, and boom success".
I ment tried one more time, by using alternative ways such the one that I post .
Not the Mi flash tool.
Well I guess thanks for taking the time to write this guide, however it's not applicable to hard bricked phones, and all the AIO tool does is use fastboot commands, that's the reason it requires fastboot access with unlocked bootloader.
Hard brick means :
- No fastboot at all. No way to boot to it on the phone. Plain black screen and nothing else.
- Stuck in fastboot with bootloader LOCKED and wrong ROM installed ("system has been destroyed"/"this MIUI can't be installed on your device")
Unfortunately for hard brick cases your only option will still require an authorized EDL account (and short the test pins for the 1st case) and only by using Mi Flash Tool.
Hi, yes I flased my phone via EDL Mode since I had no other option, (hard brick) the system was erased by a terrible mistake and the phone was only opening to fastboot mode, no matter what. And if you have hard bricked device you can not flash it in fast boot mode simply because your computer can not see the phone.
Click to expand...
Click to collapse
If your phone can boot to fastboot and the bootloader is unlocked then it's not hard bricked and can be recovered simply with fastboot commands. If you couldn't see the phone on the computer it was probably because of missing drivers or possibly fastboot/adb not running with admin rights, which I guess the AIO tool seems to fix with the "set ADB and fastboot privileges in system wide" option...
Yeah I thought so, as that app is basically a GUI version of fastboot and adb command. But I appreciate the effort to help people in here to recover their phones.
ShiningScias said:
Well I guess thanks for taking the time to write this guide, however it's not applicable to hard bricked phones, and all the AIO tool does is use fastboot commands, that's the reason it requires fastboot access with unlocked bootloader.
Hard brick means :
- No fastboot at all. No way to boot to it on the phone. Plain black screen and nothing else.
- Stuck in fastboot with bootloader LOCKED and wrong ROM installed ("system has been destroyed"/"this MIUI can't be installed on your device")
Unfortunately for hard brick cases your only option will still require an authorized EDL account (and short the test pins for the 1st case) and only by using Mi Flash Tool.
If your phone can boot to fastboot and the bootloader is unlocked then it's not hard bricked and can be recovered simply with fastboot commands. If you couldn't see the phone on the computer it was probably because of missing drivers or possibly fastboot/adb not running with admin rights, which I guess the AIO tool seems to fix with the "set ADB and fastboot privileges in system wide" option...
Click to expand...
Click to collapse
Dear ShiningScias.
Hello, well I guess then, I was on the shoft bricked side?
Thank you for making that clear to me, I then have to apologize, to everybody that I have mislead, with an assumption that was not the correct one.
I misunderstood what the hard brick is, I think probably i had jumped to that conclusion because when I was searching for rooting my phone I came across with so many tutorials and advices not to make any mistake while shifting between roms with ARB or else the outcome will be a hard brick.
Best regards.
Fantomduck said:
Dear yumm91,
Hi, yes I flased my phone via EDL Mode since I had no other option, (hard brick) the system was erased by a terrible mistake and the phone was only opening to fastboot mode, no matter what. And if you have hard bricked device you can not flash it in fast boot mode simply because your computer can not see the phone.
Thus not adb debuging authorization to comunication with the device for reflashing. So only EDL Mode that qualcom put in place for such an awkward situation
At that time the only tools and knoledge I had regarding my newly purchased phone Mi9T was:
A) Flashing through Mi flash tool (which is locked for everyone to use without special account) I found it out afterward.
B) the all in one tool, that I found when I was looking for help in xda forums, which is for unlocked phones, as it states in the main window.
Said that before, I started looking for how to flash it in edl mode.
Nobody new then (a week ago) how to revive, bring back to "life" their phones( Mi9/K20 and Pro variants).
The general idea that was floating around regarding hard bricked devices.
Was the option of having a person with authorized account for flashing, to enter to your computer, and flash it for you,
( after opening the back cover and disconnect the battery, while make jumper between the the special points on the PCB).
To return the phone back to have it repaired, Xiaomi's suggestion.
I tried many times the mi flash tool, even when I was logging in, my xiaomi account said "this computer is bound to your account you can start now", but with no luck.
So Before I take my phone and bring it to a service center, for flashing for 55 euro.
I tried one more ultimate time, and boom success.
From what I know locked phones, can not be hard bricked since the system will not let you roll back, or flash not original xiaomi rom.
I posted the way arround to the Mi flash tool, that I came accross by trying to flash a bricked device , for everybody to overcome the authorization problem.
I am not a developer nor an expert regarding android programming, I just have little experience from previous devices that I messed arround by trial and error.
Click to expand...
Click to collapse
You haved probably problem with fastboot drivers for your phone. Bcs this tool u used to boot EDL mode is also using fastboot first to boot in EDL so how u boot EDL if u told before that your phone can't be recognised by fastboot on your pc ?
I guarantee u can easily unbrick device with unlocked bootloader using only miflash or using fastboot command on adb. So there is no point to do all steps in description.
Wait. If i will unlock bootloader, and for some reason it will fail and brick, it will be bricked on locked bootloader or unlocked?
Is this method works with a GLOBAL image flash to a chinesse K20?
Fantomduck said:
Hello to everybody.
Dear friends I post this to guide (only unlocked bootloader rooted phones) you through the steps that I used to succesfully recover my Xiaomi M9T
from a hard brick (by that time only edl mode was available).
Since Xiaomi has decided to lock down their Mi flash tool, and only special authorized accounts have an access to their utility tool.
was almost impossible (by yourself) to recover your phone from a hard brick situation.
I found a way arround to xiaomi tool with a 100% succesfull 1st atempt with my own phone it worked flawlessly.
Forget the point to point jumbers with a required open phone procedure.
Forget the authorized account holders with a teamviewer use of your computer and a fee for their services (logical).
Forget returning back your phone to any authorized repair center for a revival for what ever cost.
Below you will find al the steps one by one.
First thing you need is to install: minimal_adb_fastboot_v1.4.3_setup. https://forum.xda-developers.com/showthread.php?t=2317790.
Run it and put "Y" and hit enter all the way through.
Second you need to install: TOOL_ALL_IN_ONE_2.0.1.1. https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Press tab advance options.
under the advance options window press first the tab Set ADB and fastboot privileges system wide.
It will asc you for confirmation press the tab again with the same Set ADB and fastboot privileges system wide.
Then press the tab Open a free terminal with ADB and fastboot privileges.
and type in the terminal the cmd fastboot oem edl,
It will say ADB boot oem edl OK. (unforunatelly I have no screen print from this one).
You will know at once because your phone goes from fastboot (bunny) screen to black screen and enters edl mode, is normal do not be alarmed.
In your computer you will see now under setting> devices> Qualcomm HS-USB QDLoader 9008. That is a good thing you are now in edl mode.
From there go back to already running all in one tool.
Press the tab Flash Factory images, you will go to the respective screen (below).
Select Flash all, and press the download factory image china.
Immediately will redirect you by a pop up window to the chinese site of the MIUI.
Scroll down and you will come across the Redmi K20 rom, downloaded and save it to your desktop.
Once is done decompress twice from tgz. file, to tar. file, to ready to flash rom file.
Now come back to all in one tool, and select the rom from the browsing tab, go to the desktop folder where you have previously download the roam and select the ready to flash (unzipep file) once is loaded hit flash Rom and seat back.
The ADB terminal will start the flashing procedure you will know from the very beggining if everything is normal,
Because the terminal shows the file is being prossesed and the time for each action with a followed OK
During the procedure it will break up between two or three stages of the flashing, momentarily again do not be alarmed.
If everything goes well the operation will finish with a gorgeous redmi bootup logo.
(once again I apologize no screen shot taken in advance for this step)
It will finally bootup to system, allthough it might not, But one more time do not be worried, officially you have succeded reviving your hard bricked phone.
From there if is not completing bootup simply press volume up+power botton and you have the official recovery, (in chinese of course) but you can easily
find an image with the english tab designation, hit wipe data, and reboot again, voila there you are back in bussiness.
All the gredits go to the developers of the above used tools, since I just was lucky enough to find the way through.
Good luck to all Mi9T/K20 xiaomi owners with your phone revival process.
Best regards to all of you.
P.S.
Forgive my English for any syntax or grammar errors.
I wish I had more time to spend for a more comprehensive guide.
Click to expand...
Click to collapse
Dear Fantomduck,
Thanks for sharing this with us.
I just wonder if this method will works with a GLOBAL image flash to a chinesse K20?
i used this tool before and flash k20 pro cn firmware via fastboot only no need miflash anymore. i didnt even go to edl to flash because i have bootloader unlock.
maybe someone can try to do this tutorial if they have bootloader locked and bricked
Hello sir , i would like to ask that if u use AIO tool method, so will fastboot be locked after unbrick process ?
luizkun said:
Hello sir , i would like to ask that if u use AIO tool method, so will fastboot be locked after unbrick process ?
Click to expand...
Click to collapse
i think you phone still unlock because it will use flash only not flash and lock.
arielugose said:
i think you phone still unlock because it will use flash only not flash and lock.
Click to expand...
Click to collapse
But can AIO tool reallly flash in EDL mode without Auth Mi account ? , or AIO tool will reboot to fastboot again and flash it ?
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
Having the same problem. Is there a firmware available online for flashing?
Cedric Miraflor said:
Having the same problem. Is there a firmware available online for flashing?
Click to expand...
Click to collapse
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
ankitnaik16 said:
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
Click to expand...
Click to collapse
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Cedric Miraflor said:
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Click to expand...
Click to collapse
SP Tool work in Download Mode it can be access by pressing volume up + volume down key while phone is off
I see. Im just waiting for somebody with the scatter file for this device
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme ?
RantiHasan said:
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme
Click to expand...
Click to collapse
You Are right Never Buy Realme
I finally went to service center process is too slow and tedious
Going to sell this phone and buy oneplus nord
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
i think realme dont allow you install patched boot when bootloader locked, you should leave bootloader unlocked and never locked it again if you want modified your device.
Same
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Letinamazuki said:
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Click to expand...
Click to collapse
You find solutions
I have same issue. I went to sc and they said they couldn't detect the phone on pc, then they provide one only solution which to replace the whole circuit board
did anyone found any solution?
2021, Please, i want any solution
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
mercan01 said:
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
Click to expand...
Click to collapse
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
erickdiazw said:
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
Click to expand...
Click to collapse
I have the same issue. Did you find any solution?
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
erickdiazw said:
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
Click to expand...
Click to collapse
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
gaduaxe said:
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
Click to expand...
Click to collapse
I'm sorry bro, i have Realme 6 with MediaTek, idk for Qualcomm :c
THIS GUIDE DOES NOT APPLY TO THE HARD BRICK, WHERE FASTBOOT DOES NOT WORK!!!
1) Download MI Flash: https://xiaomiflashtool.com/ (i downloaded mine from here.)
2) Download phone's original firmware. https://xiaomifirmwareupdater.com/miui/ (search the phone and select rom depending on your country.)
Remember to download the fastboot firmware.
3) Extract firmware to a folder, like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I used 7-zip.
4) Open MI Flash and let it install all the drivers needed.
5) Reboot your phone into fastboot mode (hold power key + vol down key) and plug it into your computer.
6) In MI Flash select the folder when you extracted the firmware.
7) Click refresh and make sure the program detects your phone.
8) Down the window, select clean all (otherwise it will lock the bootloader)
9) Click Flash.
Done.
NOTE: if the program displays an error "error: no command fastboot lock /s" don't worry about it. The system will work anyways.
NOTE: recovery gets replaced by the stock one
NOTE: you can just use the flash_all.bat file to flash it, but i recomend using the program. The .bat file also did not work for me.
Gabiblocks said:
THIS GUIDE DOES NOT APPLY TO THE HARD BRICK, WHERE FASTBOOT DOES NOT WORK!!!
1) Download MI Flash: https://www.xiaomiflash.com/ (i downloaded mine from here.)
2) Download phone's original firmware. https://xiaomifirmwareupdater.com/miui/ (search the phone and select rom depending on your country.)
Remember to download the fastboot firmware.
3) Extract firmware to a folder, like this:
View attachment 5549219
I used 7-zip.
4) Open MI Flash and let it install all the drivers needed.
5) Reboot your phone into fastboot mode (hold power key + vol down key) and plug it into your computer.
6) In MI Flash select the folder when you extracted the firmware.
7) Click refresh and make sure the program detects your phone.
8) Down the window, select clean all (otherwise it will lock the bootloader)
9) Click Flash.
Done.
NOTE: if the program displays an error "error: no command fastboot lock /s" don't worry about it. The system will work anyways.
NOTE: recovery gets replaced by the stock one
NOTE: you can just use the flash_all.bat file to flash it, but i recomend using the program. The .bat file also did not work for me.
Click to expand...
Click to collapse
The version of Mi Flash is obsolete(218).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
NOSS8 said:
The version of Mi Flash is obsolete(218).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
It provides the same link lol
Gabiblocks said:
THIS GUIDE DOES NOT APPLY TO THE HARD BRICK, WHERE FASTBOOT DOES NOT WORK!!!
1) Download MI Flash: https://xiaomiflashtool.com/ (i downloaded mine from here.)
2) Download phone's original firmware. https://xiaomifirmwareupdater.com/miui/ (search the phone and select rom depending on your country.)
Remember to download the fastboot firmware.
3) Extract firmware to a folder, like this:
View attachment 5549219
I used 7-zip.
4) Open MI Flash and let it install all the drivers needed.
5) Reboot your phone into fastboot mode (hold power key + vol down key) and plug it into your computer.
6) In MI Flash select the folder when you extracted the firmware.
7) Click refresh and make sure the program detects your phone.
8) Down the window, select clean all (otherwise it will lock the bootloader)
9) Click Flash.
Done.
NOTE: if the program displays an error "error: no command fastboot lock /s" don't worry about it. The system will work anyways.
NOTE: recovery gets replaced by the stock one
NOTE: you can just use the flash_all.bat file to flash it, but i recomend using the program. The .bat file also did not work for me.
Click to expand...
Click to collapse
my device is not going in fastboot any fix?
Gabiblocks said:
THIS GUIDE DOES NOT APPLY TO THE HARD BRICK, WHERE FASTBOOT DOES NOT WORK!!!
1) Download MI Flash: https://xiaomiflashtool.com/ (i downloaded mine from here.)
2) Download phone's original firmware. https://xiaomifirmwareupdater.com/miui/ (search the phone and select rom depending on your country.)
Remember to download the fastboot firmware.
3) Extract firmware to a folder, like this:
View attachment 5549219
I used 7-zip.
4) Open MI Flash and let it install all the drivers needed.
5) Reboot your phone into fastboot mode (hold power key + vol down key) and plug it into your computer.
6) In MI Flash select the folder when you extracted the firmware.
7) Click refresh and make sure the program detects your phone.
8) Down the window, select clean all (otherwise it will lock the bootloader)
9) Click Flash.
Done.
NOTE: if the program displays an error "error: no command fastboot lock /s" don't worry about it. The system will work anyways.
NOTE: recovery gets replaced by the stock one
NOTE: you can just use the flash_all.bat file to flash it, but i recomend using the program. The .bat file also did not work for me.
Click to expand...
Click to collapse
Error: critical partition flashing not allowed
Already tried the newest MiFlash Tool from the link provided above, AND the older one. Same.
What should I do?
Pasarireng said:
Error: critical partition flashing not allowed
Already tried the newest MiFlash Tool from the link provided above, AND the older one. Same.
What should I do?
Click to expand...
Click to collapse
Is the bootloader unlocked?
NOSS8 said:
Is the bootloader unlocked?
Click to expand...
Click to collapse
No. the Boot Loader is Locked.
There's no explanation about that in the 1st Post nor in other previous posts (that if the Boot Loader is locked then anybody doing this guide as it is being told, will surely find those error like me (Critical partition flashing not allowed),
so no wonder I get that error.
But then,... (before I tried this guide), it was because, after I did Factory Reset and Wipe Data) my phone was stucked on "MiUI 11 Logo' (on white background -where I can change Language and font size, but no further from that), (that's why then I tried this guide),,.. so (my point is) there's no way I can Unlock the Boot Loader first.
So, then, I try a step I watched on YouTube.
I put off the phone's back case, disconnected the battery, and so on and so on just like the video told, (EDL Flashing).
Success. (at least that was what the MiFlash Tools app told me on my PC screen)...
Put on everything back, try to turn on my phone.. but now it is doing boot loop... (and worse,.. now the boot loop is on MiUI logo with black background, even before where it was at the 1st time)
Can somebody help me?
If you can enter fastboot mode, use fastboot oem device-info to check the status.
You edited your post:
Xiaomi official tool not working?
NOSS8 said:
If you can enter fastboot mode, use fastboot oem device-info to check the status.
You edited your post:
Xiaomi official tool not working?
Click to expand...
Click to collapse
First of all, thanks for your kindness to help me.
and, Yes I often edit my post, because my English is not good and I did many mistyping. (sorry).
I edit it to make it better and clearer (for anybody who'd like to help me, like you.. Thanks again in advance).
----------
*I cannot enter Fastboot now, because it seems there's other problem, that is, I ruin the plastic power & volumes buttons (maybe when I took off the back case) somehow, they don't work now.
*I didn't and haven't try that Xiaomi Official UnlockTool, because like I said in my previous post, I didn't know that to do the guide in the 1st post in this thread, my phone has to be in UBL condition first. And I was in condition where I couldn't enter my phone (to login to Xiaomi ID on my phone, for example).
Pasarireng said:
First of all, thanks for your kindness to help me.
and, Yes I often edit my post, because my English is not good. (sorry).
I edit it to make it better and clearer (for anybody who'd like to help me, like you.. Thanks again in advance).
*I cannot enter Fastboot now, because it seems there's other problem, that is, I ruin the plastic power button (maybe when I took off the back case) somehow, it doesn't work now.
*I didn't and haven't try that Xiaomi Official UnlockTool, because like I said in my previous post, I didn't know that to do the guide in the 1st post in tis thread, my phone has to be in UBL condition first.
Click to expand...
Click to collapse
The problem in the OP is that it is not specified that the bootloader must be unlocked to use MIFLASH.
NOSS8 said:
The problem in the OP is that it is not specified that the bootloader must be unlocked to use MIFLASH.
Click to expand...
Click to collapse
yes.
(or perhaps, also mention that the Locked one still can use MIFLASH, only if they doing the EDL steps).
now I don't know what should I do to fix my phone (Redmi 5a) and make it work again.
can u help me?
Pasarireng said:
yes.
(or perhaps, also mention that the Locked one still can use MIFLASH, only if they doing the EDL steps).
now I don't know what should I do to fix my phone (Redmi 5a) and make it work again.
can u help me?
Click to expand...
Click to collapse
Start by repairing the defective button.
Or use this tool (rom currently on the phone).
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
The soc is MediaTek isn't it?
NOSS8 said:
Start by repairing the defective button.
Or use this tool (rom currently on the phone).
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
The soc is MediaTek isn't it?
Click to expand...
Click to collapse
yea.. TBH that is not easy too for me (to fix the buttons), I don't have a skillful hands LOL,.. but I'll try.
The SoC of my phone (Redmi 5a) is Qualcomm, Snapdragon 425
Pasarireng said:
yea.. TBH that is not easy too for me (to fix the buttons), I don't have a skillful hands LOL,.. but I'll try.
The SoC of my phone (Redmi 5a) is Qualcomm, Snapdragon 425
Click to expand...
Click to collapse
OK
Another tool:
(Tool) ROM2box All in one FRP, Flashing & unlocking tool
ROM2box is a Powerful tool and GUI bring all the tools on a single app. it support qcom mediatek and spreadtum phones. Supported Functions- Function Name Status bypass Auth Yes bypass FRP MTK yes bypass FRP qcom yes bypass FRP samsung...
forum.xda-developers.com
NOSS8 said:
OK
Another tool:
(Tool) ROM2box All in one FRP, Flashing & unlocking tool
ROM2box is a Powerful tool and GUI bring all the tools on a single app. it support qcom mediatek and spreadtum phones. Supported Functions- Function Name Status bypass Auth Yes bypass FRP MTK yes bypass FRP qcom yes bypass FRP samsung...
forum.xda-developers.com
Click to expand...
Click to collapse
tks, I'll read and maybe will try it after
Pasarireng said:
tks, I'll read and maybe will try it after
Click to expand...
Click to collapse
You should have posted here:
Useful information
Xiaomi Redmi 5A Guides, News, & Discussion
Use this forum to find the best how-to guides for the Xiaomi Redmi 5A and discover the latest news. General discussion also goes here.
forum.xda-developers.com
NOSS8 said:
You should have posted here:
Useful information
Xiaomi Redmi 5A Guides, News, & Discussion
Use this forum to find the best how-to guides for the Xiaomi Redmi 5A and discover the latest news. General discussion also goes here.
forum.xda-developers.com
Click to expand...
Click to collapse
I will. After the hassle either sad or -hopefully- happy ending
Pasarireng said:
I will. After the hassle either sad or -hopefully- happy ending
Click to expand...
Click to collapse
Maybe it's time to change phone.
NOSS8 said:
Maybe it's time to change phone.
Click to expand...
Click to collapse
Yeah, I'm still waiting for my payday LOL...
Actually I'm in series of bad luck,.. I lost my previous phones, (a redmi Note 10),, so I have to re-use this my old Redmi 5a blue phone, just after my other, the silver (redmi 5a too) was its screen suddenly cannot be touch when I used it as my first emergency replacement.
Explaining how it happened ; I tried to unlock the bootloader of my redmi note 11s 5g using another cellphone, I thought it wouldnt be such a bad idea, but my phone at the boot started to have the following error; dm verity corruption. I did not use my pc because at the time it was being fixed. I tried to use xiaomi unlock tool to unlock the bootloader to flash another rom to unbrick my device, but I was having a lot of errors with my mi account; it had to be connected at my device, but how tf I connect a mi account to a device with no system? My phone is mediatek, and I tried to unlock using mtkclient, but did not work, I can send to you guys logs with all the process I tried.
marsiomisterios said:
Explaining how it happened ; I tried to unlock the bootloader of my redmi note 11s 5g using another cellphone, I thought it wouldnt be such a bad idea, but my phone at the boot started to have the following error; dm verity corruption. I did not use my pc because at the time it was being fixed. I tried to use xiaomi unlock tool to unlock the bootloader to flash another rom to unbrick my device, but I was having a lot of errors with my mi account; it had to be connected at my device, but how tf I connect a mi account to a device with no system? My phone is mediatek, and I tried to unlock using mtkclient, but did not work, I can send to you guys logs with all the process I tried.
Click to expand...
Click to collapse
5g?
marsiomisterios said:
Explaining how it happened ; I tried to unlock the bootloader of my redmi note 11s 5g using another cellphone, I thought it wouldnt be such a bad idea, but my phone at the boot started to have the following error; dm verity corruption. I did not use my pc because at the time it was being fixed. I tried to use xiaomi unlock tool to unlock the bootloader to flash another rom to unbrick my device, but I was having a lot of errors with my mi account; it had to be connected at my device, but how tf I connect a mi account to a device with no system? My phone is mediatek, and I tried to unlock using mtkclient, but did not work, I can send to you guys logs with all the process I tried.
Click to expand...
Click to collapse
btw, refer to this guide
(MTK) UNLOCK BOOTLOADER WITHOUT WAITING A WEEK
Hey! (PROBABLY) WORKS ON ALL MTK DEVICES This is my first thread so pls don't eat me if something has been written wrong I found a method, that allows you unlock bootloader without xiaomi unlocking software. Now, you don't need to wait 168...
forum.xda-developers.com
when you boot your phone, what happens? is it showing mi logo?
BloxetPL said:
when you boot your phone, what happens? is it showing mi logo?
Click to expand...
Click to collapse
yes the mi logo is showing, the fastboot and the recovery is intact
marsiomisterios said:
yes the mi logo is showing, the fastboot and the recovery is intact
Click to expand...
Click to collapse
Try to flash miui via brom mode in sp flash tool. Tomorrow i will send you some links to the software and tutorial
marsiomisterios said:
yes the mi logo is showing, the fastboot and the recovery is intact
Click to expand...
Click to collapse
How to Unbrick Xiaomi Preloader and Unlock bootloader for Xiaomi Redmi 12c ( without using the mi unlock-tool) and for any MTK Redmi or Device (MTK)
Recently i hard bricked my newly released and bought Xiaomi Redmi 12c (earth) and it was a hard brick i mistakenly flashed preloader ( with sp flash-tool) while trying to unbrick it when it was still in a soft brick, so i didn't know what to do i...
forum.xda-developers.com
BloxetPL said:
Try to flash miui via brom mode in sp flash tool. Tomorrow i will send you some links to the software and tutorial
Click to expand...
Click to collapse
https://sourceforge.net/projects/fleur/files/UNBRICK/SP Flash Tool/ <----- spflash tool( YOU HAVE TO USE THIS VERSION, OTHERS WON'T WORK )
https://miuirom.org/phones/redmi-note-11s <------ here you can download miui rom (Download Fastboot ROM)
https://sourceforge.net/projects/fleur/files/UNBRICK/Drivers/ <----- DRIVERS (THE MOST IMPORTANT THING)
That's all.
REQUIREMENTS:
1. Patience
2. Brain
3. UNLOCKED bootloader
STEPS:
Download given software that is linked above
Unpack both anywhere you want (you have to unpack fastboot rom until it will be a folder)
Run SP Flash tool
Go to Options > Option > Connection > In USB section, click Full Speed
Leave options
Click Bypass Auth
Choose scatter-loading file (it's in miui rom folder inside images) it should be named MT6781_Android_scatter or MT6781_Android_scatter.txt
Click Download
Press both 3 buttons ( VOL+ VOL- & POWER ) and connect USB Cable
SP Flash tool should start now.
Wait until flash is done.
When it's done, disconnect phone and press power button until xiaomi logo appears on screen
That's it, your phone is now unbricked
Video tutorial:
I've attached 2 videos, on first video an error appeared, so i had to flash it again.
part 1: https://mega.nz/file/5xhz1KTL#RTfiiFLCGEKXK125esOcZdbCIGpAJWJlDl1Hvqzsubw
part 2: https://mega.nz/file/NgJQ0IzR#sqUTQ2vIY83gxb8gc8KDb3WozYXZj1mcco-QcM1uehU
https://sourceforge.net/projects/fleur/files/UNBRICK/SP Flash Tool/ <----- spflash tool( YOU HAVE TO USE THIS VERSION, OTHERS WON'T WORK )
BloxetPL said:
https://miuirom.org/phones/redmi-note-11s <------ here you can download miui rom (Download Fastboot ROM)
https://sourceforge.net/projects/fleur/files/UNBRICK/Drivers/ <----- DRIVERS (THE MOST IMPORTANT THING)
That's all.
REQUIREMENTS:
1. Patience
2. Brain
3. UNLOCKED bootloader
STEPS:
Download given software that is linked above
Unpack both anywhere you want (you have to unpack fastboot rom until it will be a folder)
Run SP Flash tool
Go to Options > Option > Connection > In USB section, click Full Speed
Leave options
Click Bypass Auth
Choose scatter-loading file (it's in miui rom folder inside images) it should be named MT6781_Android_scatter or MT6781_Android_scatter.txt
Click Download
Press both 3 buttons ( VOL+ VOL- & POWER ) and connect USB Cable
SP Flash tool should start now.
Wait until flash is done.
When it's done, disconnect phone and press power button until xiaomi logo appears on screen
That's it, your phone is now unbricked
Video tutorial:
I've attached 2 videos, on first video an error appeared, so i had to flash it again.
part 1: https://mega.nz/file/5xhz1KTL#RTfiiFLCGEKXK125esOcZdbCIGpAJWJlDl1Hvqzsubw
part 2: https://mega.nz/file/NgJQ0IzR#sqUTQ2vIY83gxb8gc8KDb3WozYXZj1mcco-QcM1uehU
Click to expand...
Click to collapse
I tried to flash it but I got this error;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried even to use bypass tool utility https://github.com/MTK-bypass/bypass_utility with exploits collection https://github.com/MTK-bypass/exploits_collection to disable secure boot on my device but it didn't work. I dont what else to do. I'm running out of options.
Gudaji said:
How to Unbrick Xiaomi Preloader and Unlock bootloader for Xiaomi Redmi 12c ( without using the mi unlock-tool) and for any MTK Redmi or Device (MTK)
Recently i hard bricked my newly released and bought Xiaomi Redmi 12c (earth) and it was a hard brick i mistakenly flashed preloader ( with sp flash-tool) while trying to unbrick it when it was still in a soft brick, so i didn't know what to do i...
forum.xda-developers.com
Click to expand...
Click to collapse
after trying this command my phone is without recovery but the fastboot is intact
Updating the thread; I successfully unlocked the bootloader and now the plan is to flash TWRP to my recovery to install the rom
BloxetPL said:
5g?
Click to expand...
Click to collapse
yes
BloxetPL said:
btw, refer to this guide
(MTK) UNLOCK BOOTLOADER WITHOUT WAITING A WEEK
Hey! (PROBABLY) WORKS ON ALL MTK DEVICES This is my first thread so pls don't eat me if something has been written wrong I found a method, that allows you unlock bootloader without xiaomi unlocking software. Now, you don't need to wait 168...
forum.xda-developers.com
Click to expand...
Click to collapse
yes I used this guide to unlock my bootloader
marsiomisterios said:
yes I used this guide to unlock my bootloader
Click to expand...
Click to collapse
Then flash stock rom with miflash
Gudaji said:
Then flash stock rom with miflash
Click to expand...
Click to collapse
I can't it's glitched my bootloader is unlocked but on mi flash it says it isn't